Commit def42f92 authored by Remi Hardy's avatar Remi Hardy

Update TESTING_GNB_W_COTS_UE.md

parent a12266b9
STATUS 2020/06/26 : information is up to date, but under continuous improvement
STATUS 2020/07/30 : under continuous improvement ; updated the configuration files links with CI approved reference files
## Table of Contents ##
......@@ -78,15 +79,17 @@ https://github.com/OPENAIRINTERFACE/openair-epc-fed/blob/master-documentation/do
Each component (EPC, eNB, gNB) has its own configuration file.
These config files are passed as arguments of the run command line, using the option -O \<conf file\>
Some config examples can be found in the following folder:
https://gitlab.eurecom.fr/oai/openairinterface5g/-/tree/develop/targets/PROJECTS/GENERIC-LTE-EPC/CONF
Also base config files can be found here:
The **REFERENCE** files for eNB and gNB, **used by the CI**, can be found here:
[enb conf file](../ci-scripts/conf_files/enb.band7.tm1.fr1.25PRB.usrpb210.conf)
[gnb conf file](../ci-scripts/conf_files/gnb.band78.tm1.fr1.106PRB.usrpb210.conf)
These files have to be updated manually to set the IP addresses and frequency.
**ATTENTION** : an **EXTERNAL** clock is used to sync the eNB and gNB,
whether the clock is internal or external is defined in the configuration files (!! details needed !!)
1- In the **eNB configuration file** :
- look for MME IP address, and update the **ipv4 field** with the IP address of the **EPC** server
```
......@@ -126,7 +129,7 @@ These files have to be updated manually to set the IP addresses and frequency.
}
);
```
- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server (notice : even if -in principle- S1 MME is not required for gNB setting)
- look for X2 IP address, and update the **4 fields** with the IP address of the **eNB** server / **gNB** server as below (notice : even if -in principle- S1 MME is not required for gNB setting)
```
///X2
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment