Commit fdea649d authored by Raphael Defosseux's avatar Raphael Defosseux

CI: Adding skeleton to perform basic-simulator testing

Signed-off-by: Raphael Defosseux's avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 24c1c6e1
......@@ -135,6 +135,7 @@ case $key in
LOG_PATTERN=basic_simulator
NB_PATTERN_FILES=2
BUILD_OPTIONS="--basic-simulator"
VM_MEMORY=8192
shift
;;
-v3)
......@@ -186,6 +187,7 @@ case $key in
LOG_PATTERN=basic_simulator
NB_PATTERN_FILES=2
BUILD_OPTIONS="--basic-simulator"
VM_MEMORY=8192
;;
phy-sim)
VM_NAME=ci-phy-sim
......@@ -289,6 +291,7 @@ echo "############################################################"
echo "Running install and build script on VM ($VM_NAME)"
echo "############################################################"
echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
echo "touch /home/ubuntu/.hushlogin" >> $VM_CMDS
if [[ "$VM_NAME" == *"-cppcheck"* ]]
then
echo "echo \"sudo apt-get --yes --quiet install zip cppcheck \"" >> $VM_CMDS
......
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "93";
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "3GPP_eNODEB";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
//Parameters for SIB18
rxPool_sc_CP_Len = "normal";
rxPool_sc_Period = "sf40";
rxPool_data_CP_Len = "normal";
rxPool_ResourceConfig_prb_Num = 20;
rxPool_ResourceConfig_prb_Start = 5;
rxPool_ResourceConfig_prb_End = 44;
rxPool_ResourceConfig_offsetIndicator_present = "prSmall";
rxPool_ResourceConfig_offsetIndicator_choice = 0;
rxPool_ResourceConfig_subframeBitmap_present = "prBs40";
rxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "00000000000000000000";
rxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
/* rxPool_dataHoppingConfig_hoppingParameter = 0;
rxPool_dataHoppingConfig_numSubbands = "ns1";
rxPool_dataHoppingConfig_rbOffset = 0;
rxPool_commTxResourceUC-ReqAllowed = "TRUE";
*/
// Parameters for SIB19
discRxPool_cp_Len = "normal"
discRxPool_discPeriod = "rf32"
discRxPool_numRetx = 1;
discRxPool_numRepetition = 2;
discRxPool_ResourceConfig_prb_Num = 5;
discRxPool_ResourceConfig_prb_Start = 3;
discRxPool_ResourceConfig_prb_End = 21;
discRxPool_ResourceConfig_offsetIndicator_present = "prSmall";
discRxPool_ResourceConfig_offsetIndicator_choice = 0;
discRxPool_ResourceConfig_subframeBitmap_present = "prBs40";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
phy_test_mode = 0;
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
eNB_instances = [0];
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "lo";
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
......@@ -122,6 +122,8 @@ case $key in
;;
-v2)
VM_NAME=ci-basic-sim
RUN_OPTIONS="complex"
ARCHIVES_LOC=basic_sim/test
shift
;;
-v3)
......@@ -150,6 +152,8 @@ case $key in
;;
basic-sim)
VM_NAME=ci-basic-sim
RUN_OPTIONS="complex"
ARCHIVES_LOC=basic_sim/test
;;
phy-sim)
VM_NAME=ci-phy-sim
......@@ -210,8 +214,11 @@ echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
if [ "$RUN_OPTIONS" == "none" ]
then
echo "No run on VM testing for this variant currently"
else
exit $STATUS
fi
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
echo "############################################################"
echo "Running test script on VM ($VM_NAME)"
echo "############################################################"
......@@ -271,7 +278,7 @@ else
rm -f $VM_CMDS
echo "############################################################"
echo "Checking build status"
echo "Checking run status"
echo "############################################################"
LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
......@@ -315,4 +322,219 @@ else
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
LTEBOX=0
if [ -d /opt/ltebox-archives/ ]
then
# Checking if all ltebox archives are available to run ltebx epc on a brand new VM
if [ -f /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ] && [ -f /opt/ltebox-archives/etc-conf.zip ] && [ -f /opt/ltebox-archives/hss-sim.zip ]
then
echo "############################################################"
echo "Test EPC on VM ($EPC_VM_NAME) will be using ltebox"
echo "############################################################"
LTEBOX=1
fi
fi
# Here we could have other types of EPC detection
# Do we need to start the EPC VM
EPC_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#epc-cmds#"`
echo "EPC_VM_CMD_FILE = $EPC_VM_CMDS"
IS_EPC_VM_ALIVE=`uvt-kvm list | grep -c $EPC_VM_NAME`
if [ $IS_EPC_VM_ALIVE -eq 0 ]
then
echo "############################################################"
echo "Creating test EPC VM ($EPC_VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################"
uvt-kvm create $EPC_VM_NAME release=xenial --unsafe-caching
fi
uvt-kvm wait $EPC_VM_NAME --insecure
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
echo "$EPC_VM_NAME has for IP addr = $EPC_VM_IP_ADDR"
scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
# ltebox specific actions (install and start)
if [ $LTEBOX -eq 2 ]
then
echo "############################################################"
echo "Copying ltebox archives into EPC VM ($EPC_VM_NAME)"
echo "############################################################"
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/etc-conf.zip ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
scp -o StrictHostKeyChecking=no /opt/ltebox-archives/hss-sim.zip ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
echo "############################################################"
echo "Running install and start EPC on EPC VM ($EPC_VM_NAME)"
echo "############################################################"
echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $EPC_VM_CMDS
echo "touch /home/ubuntu/.hushlogin" >> $EPC_VM_CMDS
echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $EPC_VM_CMDS
echo "sudo apt-get update > zip-install.txt 2>&1" >> $EPC_VM_CMDS
echo "sudo apt-get --yes install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf >> zip-install.txt 2>&1" >> $EPC_VM_CMDS
# Installing and Starting HSS
echo "echo \"cd /opt\"" >> $EPC_VM_CMDS
echo "cd /opt" >> $EPC_VM_CMDS
echo "echo \"sudo unzip -qq /home/ubuntu/hss-sim.zip\"" >> $EPC_VM_CMDS
echo "sudo unzip -qq /home/ubuntu/hss-sim.zip" >> $EPC_VM_CMDS
echo "echo \"cd /opt/hss_sim0609\"" >> $EPC_VM_CMDS
echo "cd /opt/hss_sim0609" >> $EPC_VM_CMDS
echo "echo \"sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real\"" >> $EPC_VM_CMDS
echo "sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real" >> $EPC_VM_CMDS
# Installing and Starting ltebox
echo "echo \"cd /home/ubuntu\"" >> $EPC_VM_CMDS
echo "cd /home/ubuntu" >> $EPC_VM_CMDS
echo "echo \"sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb \"" >> $EPC_VM_CMDS
echo "sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb >> zip-install.txt 2>&1" >> $EPC_VM_CMDS
echo "echo \"cd /opt/ltebox/etc/\"" >> $EPC_VM_CMDS
echo "cd /opt/ltebox/etc/" >> $EPC_VM_CMDS
echo "echo \"sudo unzip -qq -o /home/ubuntu/etc-conf.zip\"" >> $EPC_VM_CMDS
echo "sudo unzip -qq -o /home/ubuntu/etc-conf.zip" >> $EPC_VM_CMDS
echo "sudo sed -i -e 's#EPC_VM_IP_ADDRESS#$EPC_VM_IP_ADDR#' gw.conf" >> $EPC_VM_CMDS
echo "sudo sed -i -e 's#EPC_VM_IP_ADDRESS#$EPC_VM_IP_ADDR#' mme.conf" >> $EPC_VM_CMDS
echo "echo \"cd /opt/ltebox/tools/\"" >> $EPC_VM_CMDS
echo "cd /opt/ltebox/tools/" >> $EPC_VM_CMDS
echo "echo \"sudo ./start_ltebox\"" >> $EPC_VM_CMDS
echo "nohup sudo ./start_ltebox > /home/ubuntu/ltebox.txt" >> $EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
rm -f $EPC_VM_CMDS
# We may have some adaptation to do
if [ -f /opt/ltebox-archives/adapt_ue_sim.txt ]
then
echo "############################################################"
echo "Doing some adaptation on UE side"
echo "############################################################"
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < /opt/ltebox-archives/adapt_ue_sim.txt
fi
fi
# HERE ADD any install actions for another EPC
# Retrieve EPC real IP address
if [ $LTEBOX -eq 1 ]
then
# in our configuration file, we are using pool 5
echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $EPC_VM_CMDS
REAL_EPC_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
echo "EPC IP Address is : $REAL_EPC_IP_ADDR"
rm $EPC_VM_CMDS
fi
echo "############################################################"
echo "Starting the eNB"
echo "############################################################"
echo "cd /home/ubuntu/tmp" > $VM_CMDS
echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $VM_CMDS
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $VM_CMDS
echo "echo \"export ENODEB=1\"" >> $VM_CMDS
echo "export ENODEB=1" >> $VM_CMDS
echo "echo \"source oaienv\"" >> $VM_CMDS
echo "source oaienv" >> $VM_CMDS
echo "cd ci-scripts/conf_files/" >> $VM_CMDS
echo "cp lte-basic-sim.conf ci-lte-basic-sim.conf" >> $VM_CMDS
echo "sed -i -e 's#CI_MME_IP_ADDR#$EPC_VM_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$VM_IP_ADDR#' ci-lte-basic-sim.conf" >> $VM_CMDS
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $VM_CMDS
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $VM_CMDS
echo "echo \"./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-lte-basic-sim.conf\" > ./my-lte-softmodem-run.sh " >> $VM_CMDS
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $VM_CMDS
echo "cat ./my-lte-softmodem-run.sh" >> $VM_CMDS
echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/enb.log ./my-lte-softmodem-run.sh" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
echo "############################################################"
echo "Starting the UE"
echo "############################################################"
echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $VM_CMDS
echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" > $VM_CMDS
echo "echo \"./lte-uesoftmodem -C 2680000000 -r 25 --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
echo "cat ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/ue.log ./my-lte-uesoftmodem-run.sh" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
rm $VM_CMDS
sleep 10
echo "ifconfig oip1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $VM_CMDS
UE_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS`
echo "UE IP Address for EPC is : $UE_IP_ADDR"
rm $VM_CMDS
echo "############################################################"
echo "Pinging the UE"
echo "############################################################"
echo "echo \"ping -c 20 $UE_IP_ADDR\"" > $EPC_VM_CMDS
echo "ping -c 20 $UE_IP_ADDR | tee -a ping_ue.txt" >> $EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
rm -f $EPC_VM_CMDS
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/ping_ue.txt $ARCHIVES_LOC
echo "############################################################"
echo "Iperf DL"
echo "############################################################"
echo "echo \"iperf -u -s -i 1\"" > $VM_CMDS
echo "nohup iperf -u -s -i 1 > tmp/cmake_targets/log/iperf_dl_server.txt &" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
rm $VM_CMDS
echo "echo \"iperf -c $UE_IP_ADDR -u -t 30 -b 15M -i 1\"" > $EPC_VM_CMDS
echo "iperf -c $UE_IP_ADDR -u -t 30 -b 15M -i 1 | tee -a iperf_dl_client.txt" >> $EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
rm -f $EPC_VM_CMDS
echo "killall --signal SIGKILL iperf" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
rm $VM_CMDS
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/iperf_dl_client.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/iperf_dl_server.txt $ARCHIVES_LOC
echo "############################################################"
echo "Iperf UL"
echo "############################################################"
echo "echo \"iperf -u -s -i 1\"" > $EPC_VM_CMDS
echo "nohup iperf -u -s -i 1 > iperf_ul_server.txt &" >> $EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
rm $EPC_VM_CMDS
echo "echo \"iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b 4M -i 1\"" > $VM_CMDS
echo "iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b 4M -i 1 | tee -a /home/ubuntu/tmp/cmake_targets/log/iperf_ul_client.txt" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
rm -f $VM_CMDS
echo "killall --signal SIGKILL iperf" >> $EPC_VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
rm $EPC_VM_CMDS
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/iperf_ul_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/iperf_ul_client.txt $ARCHIVES_LOC
echo "############################################################"
echo "Terminate enb/ue simulators"
echo "############################################################"
echo "echo \"sudo daemon --name=enb_daemon --stop\"" > $VM_CMDS
echo "sudo daemon --name=enb_daemon --stop" >> $VM_CMDS
echo "echo \"sudo daemon --name=ue_daemon --stop\"" >> $VM_CMDS
echo "sudo daemon --name=ue_daemon --stop" >> $VM_CMDS
echo "echo \"sudo killall --signal SIGKILL lte-softmodem\"" >> $VM_CMDS
echo "sudo killall --signal SIGKILL lte-softmodem" >> $VM_CMDS
ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
rm -f $VM_CMDS
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/enb.log $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/ue.log $ARCHIVES_LOC
fi
exit $STATUS
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment