1. 14 Feb, 2017 3 commits
    • Cédric Roux's avatar
      fix build_oai · 09139ab0
      Cédric Roux authored
      - the option --UE was abused! Let's introduce --UE-conf-nvram and
        --UE-gen-nvram
      - the option name --UE-OUTPUT was not clear and is now replaced by
        --UE-gen-nvram
      - the new options are described when running ./build_oai -h
      - print_help has been modified (' replaced by ") to print
        $conf_nvram_path and $gen_nvram_path
      09139ab0
    • Cédric Roux's avatar
      ue_ip: use correct instance · 614d6bbe
      Cédric Roux authored
      The problem was the following.
      
      Run oaisim with two UEs:
      
          sudo ../cmake_targets/oaisim_build_oai/build/oaisim -O enb.conf -u2 -s15 -AAWGN -y1 -b1 -Q0
      
      Then wait for both UEs to be connected. The interfaces "oip1" and "oip2" are
      activated, with IP addresses 192.172.0.2 for the first UE and 192.172.0.3 for
      the second.
      
      Then on the EPC machine, do:
      
          ping 192.172.0.3
      
      No reply.
      On the oaisim machine, we see that the packets are sent to "oip1" instead
      of "oip2".
      
      The fix may break softmodem UE. The inst was forced to "1" for some reason.
      To be checked.
      614d6bbe
    • Cédric Roux's avatar
      deal with empty subframes at UE side even in oaisim · f66f6e49
      Cédric Roux authored
      The memset was also too big. It should only clear
      one subframe.
      
      Only tested without abstraction.
      Abstraction does not work for the moment anyway, but just to
      keep that in mind.
      f66f6e49
  2. 13 Feb, 2017 2 commits
    • Cédric Roux's avatar
      rewrite synchronisation in oaisim/channel simulation · b904ce79
      Cédric Roux authored
      The idea is as follows.
      
      oaisim waits for all tasks to be done for a TTI.
      To do so it waits for last_rx_timestamp == current_rx_timestamp,
      for all UEs and eNBs.
      
      When it's done, it increases current_rx_timestamp by samples_per_tti,
      to inform UEs and eNBs that a new TTI is ready.
      
      In the functions [UE|eNB]_trx_read, we wait for a new TTI to be ready,
      that is we wait for current_rx_timestamp != last_rx_timestamp.
      
      The UE has also to wait for processing threads to be done.
      In the eNB it's not necessary because the processing is all
      done in one thread, that is: read subframe, process this subframe,
      emit subframe+4, and then back to read subframe.
      
      The code is not clean. We should not use usleep but semaphores.
      
      Also, do_[DL|UL]_sig should not read from rxdata and write to txdata,
      but use internal buffers.
      
      The functions [UE|eNB]_trx_read should call do_[DL|UL]_sig and then
      copy from the internal buffers of the channel simulator into rxdata.
      
      The functions [UE|eNB]_trx_write should write data passed into the
      internal buffers of the channel simulator.
      b904ce79
    • Cédric Roux's avatar
      bugfix: eNB_id should have been UE_id · 14aa9678
      Cédric Roux authored
      14aa9678
  3. 09 Feb, 2017 6 commits
  4. 08 Feb, 2017 1 commit
    • Cédric Roux's avatar
      fix USE_MME compilation flag · 157707b0
      Cédric Roux authored
      We should use ENABLE_USE_MME, not USE_MME.
      This code is useless anyway (I think, not sure, that's why I
      leave it here), because the other threads wait for 'sync_var'
      to become >=0.
      157707b0
  5. 02 Feb, 2017 2 commits
    • Cédric Roux's avatar
      fix gen_emm_data · d72294b9
      Cédric Roux authored
      It was not setting emm_data->eplmn.plmn[X], only emm_data->eplmn.n_plmns,
      leading to the UE to dig for PLMN 00000.
      
      (It's not the end of the story, seems like the PLMN selection
      does not work, the UE only tries one from what I've seen, but
      I didn't dig much, may be wrong.)
      d72294b9
    • Cédric Roux's avatar
      better handle user input in hex_string_to_hex_value · ea6fb5c4
      Cédric Roux authored
      Adapt calling sites too.
      
      When data comes from the user, it is good to check that
      what we read is correct and warn the user if it's not.
      ea6fb5c4
  6. 01 Feb, 2017 1 commit
  7. 27 Jan, 2017 5 commits
    • Cédric Roux's avatar
      update license information · 53e416be
      Cédric Roux authored
      Also included some source files not related to this branch.
      
      	modified:   openair1/PHY/LTE_ESTIMATION/lte_dl_bf_channel_estimation.c
      	modified:   openair1/PHY/LTE_TRANSPORT/pilots_ue_spec.c
      	modified:   openair1/PHY/MODULATION/beamforming.c
      	modified:   openair1/PHY/TOOLS/twiddle18432.h
      	modified:   openair1/SIMULATION/LTE_PHY/dlsim_tm7.c
      	modified:   openair3/NAS/TOOLS/nvram.c
      	modified:   openair3/NAS/TOOLS/usim.c
      	modified:   openair3/NAS/UE/user_defs.h
      53e416be
    • Cédric Roux's avatar
      update CMakeLists for ubuntu 16.04 · 106f3152
      Cédric Roux authored
      The previous version did not compile on ubuntu 16.04.
      I left the old version, commented, just in case.
      106f3152
    • Cédric Roux's avatar
      fix compilation of oaisim · f6e42ce9
      Cédric Roux authored
      That's not the end of the story though.
      f6e42ce9
    • Cédric Roux's avatar
      remove duplicated definitions · c62b54a0
      Cédric Roux authored
      I am not sure if it's the right way to solve the
      problem, so I keep the definitions here and
      put them inside #if 0 #endif
      c62b54a0
    • Cédric Roux's avatar
      add missing #ifndef #endif guards in header file · 1cd46a75
      Cédric Roux authored
      	modified:   targets/COMMON/openairinterface5g_limits.h
      1cd46a75
  8. 25 Jan, 2017 20 commits