1. 02 Jun, 2018 1 commit
  2. 24 May, 2018 1 commit
  3. 29 Apr, 2018 1 commit
  4. 22 Apr, 2018 1 commit
  5. 16 Apr, 2018 1 commit
    • Bi-Ruei, Chiu's avatar
      Compare version number using MAKE_VERSION macro to provide better SW configuration: · 5c23af77
      Bi-Ruei, Chiu authored
      1. Previous SW configuration for different RRC version relies on whether macro Rel10,
         Rel14 defined or not by checking #ifdef Rel14 or #if defined(Rel10) || defined(R14).
         Whenever there is a newer RRC version, e.g. Rel15, it will be very a tedious and
         error-prone job to add defined(Rel15) in every place.
      
      2. Some RRC messages are defined in release 13 instead of release 14, NB-IoT
         feature is one of such example. Our code shall reflect this fact instead of using
         an afterward version number in software configuration.
      
      3. Some RRC messages or some fields of certain RRC messages are added in the middle
         a release, e.g. SystemInformationBlockType1_v1310_IEs_t defined in RRC 13.1.0
         and RRC 9.2.0 made some changes to SIB12 and SIB13 so we have sib12_v920 and
         sib13_v920 fields in SIB12 and SIB13's struct.
         We need a finer grain of control when using ASN1 from different RRC version.
      
      4. S1AP also has this problem that it use UPDATE_RELEASE_9 and UPDATE_RELEASE_10 to
         differentiate between various S1AP version.
      
      This commit propose using MAKE_VERSION(x,y,z) to designate the version number and
      modify current conditional compilation accordingly.
      
      Note: 2018/04/16, Modified based on Cedric's comment.
      5c23af77
  6. 12 Apr, 2018 1 commit
  7. 06 Apr, 2018 1 commit
  8. 19 Mar, 2018 1 commit
    • Cedric Roux's avatar
      bugfix: send UL NACK (on PHICH) at the right place · d3938147
      Cedric Roux authored
      The PHICH was not programmed for the last round (4) because it was
      not programmed in rx_sdu but in schedule_ulsch_rnti, only in case
      of a programmed retransmission (there is obviously no retransmission
      programmed after the last round).
      
      The case of Msg3 is not handled. To be done somehow.
      d3938147
  9. 20 Feb, 2018 1 commit
  10. 15 Feb, 2018 1 commit
    • Cedric Roux's avatar
      integration fix: set default max MCS for UL back to 20 · c0be5a12
      Cedric Roux authored
      Doing an iperf UDP uplink test, we could reach only 6Mb/s
      with very good radio conditions instead of around 8Mb/s.
      
      It turns out the MCS was limited to 16.
      
      With this commit, we are back to a bit more than 8Mb/s
      as it used to be.
      
      (This is with a 5MHz bandwidth.)
      c0be5a12
  11. 13 Feb, 2018 1 commit
  12. 12 Feb, 2018 3 commits
  13. 06 Feb, 2018 1 commit
    • Cedric Roux's avatar
      bugfix: fix UL over scheduling · eccb96c4
      Cedric Roux authored
      There is too much UL scheduling because the buffer status is
      overestimated.
      
      This commit tries to make things simpler.
      eccb96c4
  14. 03 Feb, 2018 1 commit
  15. 31 Jan, 2018 3 commits
  16. 24 Jan, 2018 1 commit
  17. 21 Jan, 2018 1 commit
  18. 15 Jan, 2018 2 commits
    • Cedric Roux's avatar
      Fix NFAPI integration · 922b5b59
      Cedric Roux authored
      This commit fixes issues introduced by the previous commit.
      
      Summary of work:
      - cleanup:
        - fix LOG_XX to be less verbose
        - fix cmake_targets/CMakeLists.txt
        - fix oaienv
        - remove dead code
      - bug fixes:
        - in openair1/SCHED/fapi_l1.c we had:
            eNB->pdcch_vars[subframe&1].num_dci           = number_dci;
          should be:
            eNB->pdcch_vars[subframe&1].num_dci           = 0;
          This bug let the PHY send more DCIs than what should have been
          sent because num_dci is incremented later on in the code.
          This fix may be a problem for fapi mode, to be checked.
        - add new T VCD traces
        - revert openair1/PHY/TOOLS/file_output.c to 'develop' version
        - remove thread_id in logRecord/logRecord_mt
        - revert (and adapt) configuration files
        - be careful when doing frame++, we need to % 1024
        - revert target_rx_power in openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
      - NFAPI:
        - the open-nFAPI code has been included in the repository. See nfapi/README.
          Maybe we should "git clone" the Cisco repository instead. We have to be
          careful of availability though.
      
      What has been tested:
      - monolithic eNB FDD 5/10MHz with one UE, iperf UDP/TCP uplink/downlink
      
      Anything else may fail to work, especially the FAPI mode, which has not
      been tested at all.
      922b5b59
    • Cedric Roux's avatar
      import NFAPI work from David Price from Cisco (non-working commit, do not use it) · 7757b9e7
      Cedric Roux authored
      It has been chosen to not include the full history of commits
      from David. He included a binary version of wireshark, probably
      a modified one that understands NFAPI. Wireshark is released under
      the GPL license, we cannot include it in the repository. We could
      have done a next commit to remove this binary. But then it would
      still be present in the history of commits, which may not be allowed.
      And it would take space on disk. We could edit the history to remove
      wireshark entirely. But this operation is too complicated.
      
      There was also a pcap capture file, which has nothing to do in
      the history of commits and would take space on disk. There again,
      it's too difficult to edit the history to remove it.
      
      There was a file .gitignore that was also removed.
      
      The original history can be found on David's repository:
      https://gitlab.eurecom.fr/daveprice/openairinterface5g/
      The branch is: nfapi-ru-rau-split.
      
      A copy of that branch has been included in the internal OAI
      repository, for those who have access to it.
      The branch is the same. The last commit ID is
      9106438239e0bc626ff1fa1d97d911caadd0fbb9.
      
      You can compare the current commit with the commit 9106...
      to see what differs.
      
      The current commit has to be considered non-working.
      The commit following the current commit will fix problems with
      the work in the current commit.
      
      If you use git bisect, don't spend time analyzing the current
      commit.
      7757b9e7
  19. 28 Nov, 2017 1 commit
  20. 27 Nov, 2017 1 commit
  21. 04 Nov, 2017 1 commit
  22. 25 Oct, 2017 1 commit
    • Cedric Roux's avatar
      bugfix: fix timing advance · 6da42658
      Cedric Roux authored
      - remove global variables in the function lte_est_timing_advance_pusch
      - do the smoothing logic that was in lte_est_timing_advance_pusch
        in rx_sdu (is it necessary? is it correct?)
      - put back the value 100 in prach_procedures for the test on prach energy
      - change the value of timing_advance_update
      
        it was:
      
           timing_advance_update                  = sync_pos - eNB->frame_parms.nb_prefix_samples/4; //to check
      
        it is now:
      
           timing_advance_update                  = sync_pos; // - eNB->frame_parms.nb_prefix_samples/4; //to check
      
        this should be checked somehow. The computation looked suspicious. Maybe
        the new one is wrong.
      6da42658
  23. 23 Oct, 2017 1 commit
  24. 19 Oct, 2017 1 commit
    • Cedric Roux's avatar
      remove gcc warnings · f1e8bff3
      Cedric Roux authored
      phy_init_lte_ue_signal was renamed init_lte_ue_signal in openair1/PHY/INIT/defs.h
      maybe it's the opposite that should have been done?
      
      Functions used in one file and defined in another may have been
      declared in the wrong header file.
      f1e8bff3
  25. 18 Oct, 2017 1 commit
    • Cedric Roux's avatar
      improve crnti reception (still not correct, we need to reconfigure the UE) · 256c5ab0
      Cedric Roux authored
      TODO: if the UE did random access (followed by a MAC uplink with
      CRNTI) because none of its scheduling request was granted, then
      according to 36.321 5.4.4 the UE's MAC will notify RRC to release
      PUCCH/SRS. According to 36.331 5.3.13 the UE will then apply
      default configuration for CQI reporting and scheduling requests,
      which basically means that the CQI requests won't work anymore and
      that the UE won't do any scheduling request anymore as long as the
      eNB doesn't reconfigure the UE.
      We have to take care of this. As the code is, nothing is done and
      the UE state in the eNB is wrong.
      256c5ab0
  26. 17 Oct, 2017 1 commit
  27. 16 Oct, 2017 1 commit
    • Cedric Roux's avatar
      trying to get better power management · 3d14d571
      Cedric Roux authored
      - change target values
      - change upper/lower limit to trigger a tpc
      - don't use ul_cqi from SR
      
      The value of ul_cqi is not convincing, for both PUSCH and PUCCH,
      more work/analysis is required.
      3d14d571
  28. 15 Oct, 2017 1 commit
  29. 14 Oct, 2017 1 commit
  30. 12 Oct, 2017 2 commits
  31. 11 Oct, 2017 1 commit
  32. 10 Oct, 2017 2 commits
  33. 08 Oct, 2017 1 commit