Some of them might not be correctly handled.
I put /* TODO: XXX */ where I didn't know if
the fix was correct.

see issue #177

fix incorrect fss_pusch calculation
fix the incorrrect HARQ-PID checking
remove incorrect checking on downlink DCI HARQ PID value
fix incorrect downlink ACK/NACK feedback procedures in TDD
fix no activating PDSCH decoding when DL-DCI is indicating a downlink retransmission

see issue #176

           2- reset dataTx buff correctly
           3- pucch/pusch power control fix

see issue #166

enhanced wireshark logging. also logs BCH, PRACH and RAR. Tested with wireshark 2.2.2 on linux and windows

see issue #45

This reverts commit 5466562b16d70f2729f6103e1c0d3ee619470191.

fixed missing a slot_fep() processing on the 1st OFDM symbol of the first DL subframe after UL, causing no SI-RNTI DCI detected

           1-issue#35: miss dci detection
           2-issue#36: ack/nack on pusch are badly encoded
           3-issue#37: ack/nack are sent on pucch instead of pusch

           1- timing Advance fix
           2- harq UL fix

           1- implement max harq retrans
           2- bug in harqId > 1 for dci format 1A
           3- wrong G computation
           4- bug in harq UL for scheduling flag
           5- initial sync, limit freq offset to 150Hz

- add progess bar report
- reduce ssh max_tries to 10
- cleanOldPrograms -> change kill cmd line to be able to run autotest on same machine than lte-softmodem (thanks Rohit & Gabriel)
- Cleanning output prints
- add --skip-machine-preparation on cmd line
- add --skip-sanity-check on cmd line
- add HTML REPORT (no-S1 only)
- add XML detailled report (no-S1 only)

                   1- Implement SRS procedures
                   2- Implement SRS procedures part2
                   3- Implement SRS: SRS valid on CMW

               1- Implement SRS procedures
               2- Implement SRS procedures part2

           1- Implement SRS procedures

           - pusch/pucch power control
           - pucch encoding call
           - srb/drb add with default value