diff --git a/ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf b/ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf new file mode 100644 index 0000000000000000000000000000000000000000..f810dd546cab7fa7352dd27682e273aef61d333a --- /dev/null +++ b/ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf @@ -0,0 +1,299 @@ +Active_gNBs = ( "gNB-Eurecom-5GNRBox"); +# Asn1_verbosity, choice in: none, info, annoying +Asn1_verbosity = "none"; + +gNBs = +( + { + ////////// Identification parameters: + gNB_ID = 0xe00; + + cell_type = "CELL_MACRO_GNB"; + + gNB_name = "gNB-Eurecom-5GNRBox"; + + // Tracking area code, 0x0000 and 0xfffe are reserved values + tracking_area_code = 1; + + plmn_list = ({mcc = 311; mnc = 480; mnc_length = 3;}); + + tr_s_preference = "local_mac" + + ////////// Physical parameters: + + ssb_SubcarrierOffset = 0; + pdsch_AntennaPorts = 1; + pusch_TargetSNRx10 = 200; + pucch_TargetSNRx10 = 200; + + servingCellConfigCommon = ( + { + #spCellConfigCommon + + physCellId = 0; + +# downlinkConfigCommon + #frequencyInfoDL + # this is pointA + 23 PRBs@120kHz SCS (same as initial BWP) + absoluteFrequencySSB = 2071241; + dl_frequencyBand = 261; + # this is 27.900 GHz + dl_absoluteFrequencyPointA = 2070833; + #scs-SpecificCarrierList + dl_offstToCarrier = 0; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + dl_subcarrierSpacing = 3; + dl_carrierBandwidth = 32; + #initialDownlinkBWP + #genericParameters + # this is RBstart=0,L=32 (275*(L-1))+RBstart + initialDLBWPlocationAndBandwidth = 8525; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + initialDLBWPsubcarrierSpacing = 3; + #pdcch-ConfigCommon + initialDLBWPcontrolResourceSetZero = 12; + initialDLBWPsearchSpaceZero = 0; + #pdsch-ConfigCommon + #pdschTimeDomainAllocationList (up to 16 entries) + initialDLBWPk0_0 = 0; + #initialULBWPmappingType + #0=typeA,1=typeB + initialDLBWPmappingType_0 = 0; + #this is SS=2,L=3 + initialDLBWPstartSymbolAndLength_0 = 40; + + initialDLBWPk0_1 = 0; + initialDLBWPmappingType_1 = 0; + #this is SS=2,L=12 + initialDLBWPstartSymbolAndLength_1 = 53; + + initialDLBWPk0_2 = 0; + initialDLBWPmappingType_2 = 0; + #this is SS=1,L=12 + initialDLBWPstartSymbolAndLength_2 = 54; + + initialDLBWPk0_3 = 0; + initialDLBWPmappingType_3 = 0; + #this is SS=1,L=4 //5 (4 is for 43, 5 is for 57) + initialDLBWPstartSymbolAndLength_3 = 57; //43; //57; + #uplinkConfigCommon + #frequencyInfoUL + ul_frequencyBand = 261; + #scs-SpecificCarrierList + ul_offstToCarrier = 0; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + ul_subcarrierSpacing = 3; + ul_carrierBandwidth = 32; + pMax = 20; + #initialUplinkBWP + #genericParameters + initialULBWPlocationAndBandwidth = 8525; +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + initialULBWPsubcarrierSpacing = 3; + #rach-ConfigCommon + #rach-ConfigGeneric + prach_ConfigurationIndex = 52; +#prach_msg1_FDM +#0 = one, 1=two, 2=four, 3=eight + prach_msg1_FDM = 0; + prach_msg1_FrequencyStart = 0; + zeroCorrelationZoneConfig = 13; + preambleReceivedTargetPower = -118; +#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200) + preambleTransMax = 6; +#powerRampingStep +# 0=dB0,1=dB2,2=dB4,3=dB6 + powerRampingStep = 1; +#ra_ReponseWindow +#1,2,4,8,10,20,40,80 + ra_ResponseWindow = 7; +#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR +#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen + ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4; +#oneHalf (0..15) 4,8,12,16,...60,64 + ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 7; +#ra_ContentionResolutionTimer +#(0..7) 8,16,24,32,40,48,56,64 + ra_ContentionResolutionTimer = 7; + rsrp_ThresholdSSB = 19; +#prach-RootSequenceIndex_PR +#1 = 839, 2 = 139 + prach_RootSequenceIndex_PR = 2; + prach_RootSequenceIndex = 1; + # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex + # + msg1_SubcarrierSpacing = 3, + +# restrictedSetConfig +# 0=unrestricted, 1=restricted type A, 2=restricted type B + restrictedSetConfig = 0, + # pusch-ConfigCommon (up to 16 elements) + initialULBWPk2_0 = 6; + initialULBWPmappingType_0 = 1 + # this is SS=0 L=11 + initialULBWPstartSymbolAndLength_0 = 55; + + initialULBWPk2_1 = 6; + initialULBWPmappingType_1 = 1; + # this is SS=0 L=12 + initialULBWPstartSymbolAndLength_1 = 69; + + initialULBWPk2_2 = 14; + initialULBWPmappingType_2 = 1; + # this is SS=10 L=4 + initialULBWPstartSymbolAndLength_2 = 52; + + msg3_DeltaPreamble = 1; + p0_NominalWithGrant =-90; + +# pucch-ConfigCommon setup : +# pucchGroupHopping +# 0 = neither, 1= group hopping, 2=sequence hopping + pucchGroupHopping = 0; + hoppingId = 40; + p0_nominal = -90; +# ssb_PositionsInBurs_BitmapPR +# 1=short, 2=medium, 3=long + ssb_PositionsInBurst_PR = 3; + ssb_PositionsInBurst_Bitmap = 0x0001000100010001L; + +# ssb_periodicityServingCell +# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 + ssb_periodicityServingCell = 2; + +# dmrs_TypeA_position +# 0 = pos2, 1 = pos3 + dmrs_TypeA_Position = 0; + +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + subcarrierSpacing = 3; + + + #tdd-UL-DL-ConfigurationCommon +# subcarrierSpacing +# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 + referenceSubcarrierSpacing = 3; + # pattern1 + # dl_UL_TransmissionPeriodicity + # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10 + dl_UL_TransmissionPeriodicity = 3; + nrofDownlinkSlots = 7; + nrofDownlinkSymbols = 6; + nrofUplinkSlots = 2; + nrofUplinkSymbols = 4; + + ssPBCH_BlockPower = 10; + } + + ); + + + # ------- SCTP definitions + SCTP : + { + # Number of streams to use in input/output + SCTP_INSTREAMS = 2; + SCTP_OUTSTREAMS = 2; + }; + + + ////////// MME parameters: + mme_ip_address = ( { ipv4 = "192.168.18.99"; + ipv6 = "192:168:30::17"; + active = "yes"; + preference = "ipv4"; + } + ); + + ///X2 + enable_x2 = "no"; + t_reloc_prep = 1000; /* unit: millisecond */ + tx2_reloc_overall = 2000; /* unit: millisecond */ + t_dc_prep = 1000; /* unit: millisecond */ + t_dc_overall = 2000; /* unit: millisecond */ + target_enb_x2_ip_address = ( + { ipv4 = "192.168.18.199"; + ipv6 = "192:168:30::17"; + preference = "ipv4"; + } + ); + + NETWORK_INTERFACES : + { + + GNB_INTERFACE_NAME_FOR_S1_MME = "eth0"; + GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.18.198/24"; + GNB_INTERFACE_NAME_FOR_S1U = "eth0"; + GNB_IPV4_ADDRESS_FOR_S1U = "192.168.18.198/24"; + GNB_PORT_FOR_S1U = 2152; # Spec 2152 + GNB_IPV4_ADDRESS_FOR_X2C = "192.168.18.198/24"; + GNB_PORT_FOR_X2C = 36422; # Spec 36422 + }; + } +); + +MACRLCs = ( + { + num_cc = 1; + tr_s_preference = "local_L1"; + tr_n_preference = "local_RRC"; + } +); + +L1s = ( + { + num_cc = 1; + tr_n_preference = "local_mac"; + } +); + +RUs = ( + { + local_rf = "yes" + nb_tx = 1; + nb_rx = 1; + att_tx = 0; + att_rx = 0; + bands = [7]; + max_pdschReferenceSignalPower = -27; + max_rxgain = 75; + eNB_instances = [0]; + sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2"; + if_freq = 5124520000L; + clock_src = "external"; + time_src = "external"; + } +); + +THREAD_STRUCT = ( + { + #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT" + parallel_config = "PARALLEL_RU_L1_TRX_SPLIT"; + #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE" + worker_config = "WORKER_ENABLE"; + } +); + + log_config : + { + global_log_level ="info"; + global_log_verbosity ="medium"; + hw_log_level ="info"; + hw_log_verbosity ="medium"; + phy_log_level ="info"; + phy_log_verbosity ="medium"; + mac_log_level ="info"; + mac_log_verbosity ="high"; + rlc_log_level ="info"; + rlc_log_verbosity ="medium"; + pdcp_log_level ="info"; + pdcp_log_verbosity ="medium"; + rrc_log_level ="info"; + rrc_log_verbosity ="medium"; + }; + diff --git a/ci-scripts/runTestOnVM.sh b/ci-scripts/runTestOnVM.sh index 70eabb7b695ecc4218c2d80143e47f3ff8124b0b..0214e403577ac1f214c80d8fc6412ad2211673e2 100755 --- a/ci-scripts/runTestOnVM.sh +++ b/ci-scripts/runTestOnVM.sh @@ -2189,6 +2189,83 @@ function run_test_on_vm { if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]] then + #RA FR2 test, attention : has a different config file from the rest of the test + CN_CONFIG="noS1" + CONF_FILE=gnb.band261.tm1.32PRB.usrpn300.conf + S1_NOS1_CFG=0 + PRB=32 + FREQUENCY=28000 #28GHz + + if [ ! -d $ARCHIVES_LOC ] + then + mkdir --parents $ARCHIVES_LOC + fi + + local try_cnt=0 + NR_STATUS=0 + + ######### start of RA TEST loop + while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI + do + + SYNC_STATUS=0 + RA_FR2_STATUS=0 + rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*ra_fr2_test.log + + echo "############################################################" + echo "${CN_CONFIG} : Starting the gNB" + echo "############################################################" + CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log + #last argument = 1 is to enable --do-ra for RA test + start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1 + + echo "############################################################" + echo "${CN_CONFIG} : Starting the NR-UE" + echo "############################################################" + CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_ra_fr2_test.log + #last argument = 1 is to enable --do-ra for RA test + start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1 + if [ $NR_UE_SYNC -eq 0 ] + then + echo "Problem w/ gNB and NR-UE not syncing" + terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2 + terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1 + scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC + SYNC_STATUS=-1 + try_cnt=$((try_cnt+1)) + continue + fi + + echo "############################################################" + echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators" + echo "############################################################" + sleep 20 + terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2 + terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1 + scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC + scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC + + #check RA markers in gNB and NR UE log files + echo "############################################################" + echo "${CN_CONFIG} : Checking RA on gNB / NR-UE" + echo "############################################################" + + # Proper check to be done when RA test is working! + check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE + if [ $RA_FR2_STATUS -ne 0 ] + then + echo "RA FR2 test NOT OK" + echo "try_cnt = " $try_cnt + try_cnt=$((try_cnt+1)) + else + try_cnt=$((try_cnt+10)) + fi + done + ########### end RA FR2 test + + ######### redefine config for the rest of the test + CN_CONFIG="noS1" CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf S1_NOS1_CFG=0 @@ -2377,6 +2454,7 @@ function run_test_on_vm { echo "Checking run status" echo "############################################################" + if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi