runTestOnVM.sh 63.4 KB
Newer Older
1
#!/bin/bash
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */
22

23 24
function run_test_usage {
    echo "OAI CI VM script"
25
    echo "   Original Author: Raphael Defosseux"
26 27 28
    echo "   Requirements:"
    echo "     -- uvtool uvtool-libvirt apt-cacher"
    echo "     -- xenial image already synced"
29 30 31 32 33
    echo "   Default:"
    echo "     -- eNB with USRP"
    echo ""
    echo "Usage:"
    echo "------"
34
    echo "    oai-ci-vm-tool test [OPTIONS]"
35 36 37 38 39 40 41 42 43 44 45 46
    echo ""
    echo "Options:"
    echo "--------"
    echo "    --job-name #### OR -jn ####"
    echo "    Specify the name of the Jenkins job."
    echo ""
    echo "    --build-id #### OR -id ####"
    echo "    Specify the build ID of the Jenkins job."
    echo ""
    echo "    --workspace #### OR -ws ####"
    echo "    Specify the workspace."
    echo ""
47
    variant_usage
48 49 50 51 52 53 54 55 56 57
    echo "    Specify the variant to build."
    echo ""
    echo "    --keep-vm-alive OR -k"
    echo "    Keep the VM alive after the build."
    echo ""
    echo "    --help OR -h"
    echo "    Print this help message."
    echo ""
}

58 59 60 61 62
function start_basic_sim_enb {
    local LOC_VM_IP_ADDR=$2
    local LOC_EPC_IP_ADDR=$3
    local LOC_LOG_FILE=$4
    local LOC_NB_RBS=$5
63
    local LOC_CONF_FILE=$6
64
    local LOC_FLEXRAN_CTL_IP_ADRR=$7
65 66 67 68 69 70 71 72
    echo "cd /home/ubuntu/tmp" > $1
    echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
    echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
    echo "echo \"export ENODEB=1\"" >> $1
    echo "export ENODEB=1" >> $1
    echo "echo \"source oaienv\"" >> $1
    echo "source oaienv" >> $1
    echo "cd ci-scripts/conf_files/" >> $1
73 74
    echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
    echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL                                         = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
75 76 77 78 79 80
    if [[ $LOC_FLEXRAN_CTL_IP_ADRR =~ .*none.* ]]
    then
        echo "sed -i -e 's#CI_FLEXRAN_CTL_IP_ADDR#127.0.0.1#' ci-$LOC_CONF_FILE" >> $1
    else
        echo "sed -i -e 's#FLEXRAN_ENABLED        = .*no.*;#FLEXRAN_ENABLED        = \"yes\";#' -e 's#CI_FLEXRAN_CTL_IP_ADDR#$LOC_FLEXRAN_CTL_IP_ADRR#' ci-$LOC_CONF_FILE" >> $1
    fi
81 82
    echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
    echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
83
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
84 85
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator" >> $1
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
86
    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
87
    echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
88 89
    echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
    echo "cat ./my-lte-softmodem-run.sh" >> $1
90
    echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
91 92 93
    echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1

    ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
94
    sleep 10
95 96 97 98 99 100
    rm $1
}

function start_basic_sim_ue {
    local LOC_UE_LOG_FILE=$3
    local LOC_NB_RBS=$4
101
    local LOC_FREQUENCY=$5
102
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
103 104
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
105
    echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
106 107
    echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
    echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
108
    echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE; fi" >> $1
109 110 111 112 113 114 115
    echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1

    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1

    local i="0"
    echo "ifconfig oip1 | egrep -c \"inet addr\"" > $1
116
    while [ $i -lt 10 ]
117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
    do
        sleep 5
        CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1`
        if [ $CONNECTED -eq 1 ]
        then
            i="100"
        else
            i=$[$i+1]
        fi
    done
    rm $1
    if [ $i -lt 50 ]
    then
        UE_SYNC=0
    else
        UE_SYNC=1
    fi
}

function get_ue_ip_addr {
    echo "ifconfig oip1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $1
    UE_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1`
    echo "UE IP Address for EPC is : $UE_IP_ADDR"
    rm $1
}

function ping_ue_ip_addr {
    echo "echo \"ping -c 20 $3\"" > $1
    echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1
    echo "ping -c 20 $UE_IP_ADDR | tee -a $4" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

151 152 153 154 155 156 157 158 159
function ping_epc_ip_addr {
    echo "echo \"COMMAND IS: ping -I oip1 -c 20 $3\" > $4" > $1
    echo "rm -f $4" >> $1
    echo "ping -I oip1 -c 20 $3 | tee -a $4" >> $1
    cat $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

160 161 162 163 164 165 166 167 168
function check_ping_result {
    local LOC_PING_FILE=$1
    local LOC_NB_PINGS=$2
    if [ -f $LOC_PING_FILE ]
    then
        local FILE_COMPLETE=`egrep -c "ping statistics" $LOC_PING_FILE`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            PING_STATUS=-1
169
            echo "ping file incomplete"
170 171 172 173 174 175
        else
            local ALL_PACKET_RECEIVED=`egrep -c "$LOC_NB_PINGS received" $LOC_PING_FILE`
            if [ $ALL_PACKET_RECEIVED -eq 1 ]
            then
                echo "got all ping packets"
            else
176
                echo "got NOT all ping packets"
177 178 179 180
                PING_STATUS=-1
            fi
        fi
    else
181
        echo "ping file not present"
182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249
        PING_STATUS=-1
    fi
}

function iperf_dl {
    local REQ_BANDWIDTH=$5
    local BASE_LOG_FILE=$6
    echo "echo \"iperf -u -s -i 1\"" > $1
    echo "echo \"COMMAND IS: iperf -u -s -i 1\" > tmp/cmake_targets/log/${BASE_LOG_FILE}_server.txt" > $1
    echo "nohup iperf -u -s -i 1 >> tmp/cmake_targets/log/${BASE_LOG_FILE}_server.txt &" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1

    echo "echo \"iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\"" > $3
    echo "echo \"COMMAND IS: iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\" > ${BASE_LOG_FILE}_client.txt" > $3
    echo "iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1 | tee -a ${BASE_LOG_FILE}_client.txt" >> $3
    ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
    rm -f $3

    echo "killall --signal SIGKILL iperf" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
}

function iperf_ul {
    local REQ_BANDWIDTH=$5
    local BASE_LOG_FILE=$6
    echo "echo \"iperf -u -s -i 1\"" > $3
    echo "echo \"COMMAND IS: iperf -u -s -i 1\" > ${BASE_LOG_FILE}_server.txt" > $3
    echo "nohup iperf -u -s -i 1 >> ${BASE_LOG_FILE}_server.txt &" >> $3
    ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
    rm $3

    echo "echo \"iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\"" > $1
    echo "echo \"COMMAND IS: iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\" > /home/ubuntu/tmp/cmake_targets/log/${BASE_LOG_FILE}_client.txt" > $1
    echo "iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1 | tee -a /home/ubuntu/tmp/cmake_targets/log/${BASE_LOG_FILE}_client.txt" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1

    echo "killall --signal SIGKILL iperf" >> $3
    ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
    rm $3
}

function check_iperf {
    local LOC_BASE_LOG=$1
    local LOC_REQ_BW=$2
    local LOC_REQ_BW_MINUS_ONE=`echo "$LOC_REQ_BW - 1" | bc -l`
    if [ -f ${LOC_BASE_LOG}_client.txt ]
    then
        local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            IPERF_STATUS=-1
        else
            local EFFECTIVE_BANDWIDTH=`tail -n3 ${LOC_BASE_LOG}_client.txt | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
            if [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_ONE}.*Mbits.* ]]
            then
                echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
            else
                IPERF_STATUS=-1
            fi
        fi
    else
        IPERF_STATUS=-1
    fi
}

250
function terminate_enb_ue_basic_sim {
251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272
    echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" > $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=enb_daemon --stop\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=enb_daemon --stop; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=ue_daemon --stop\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=ue_daemon --stop; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
    echo "echo \"ps -aux | grep softmodem\"" >> $1
    echo "ps -aux | grep softmodem | grep -v grep" >> $1
    echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGINT lte-softmodem\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGINT lte-softmodem; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
    echo "echo \"ps -aux | grep softmodem\"" >> $1
    echo "ps -aux | grep softmodem | grep -v grep" >> $1
    echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-softmodem\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-softmodem; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-uesoftmodem\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-uesoftmodem; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
    echo "echo \"ps -aux | grep softmodem\"" >> $1
    echo "ps -aux | grep softmodem | grep -v grep" >> $1
273 274 275 276
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294
function recover_core_dump {
    local IS_SEG_FAULT=`egrep -ic "segmentation fault" $3`
    if [ $IS_SEG_FAULT -ne 0 ]
    then
        local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
        echo "Segmentation fault detected on enb -> recovering core dump"
        echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
        echo "sync" >> $1
        echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
        echo "sudo rm core" >> $1
        echo "rm ci-lte-basic-sim.conf" >> $1
        echo "sync" >> $1
        ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/basic_simulator/enb/basic-simulator-enb-core-${TC}.bz2 $4
        rm -f $1
    fi
}

295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319
function install_epc_on_vm {
    local LOC_EPC_VM_NAME=$1
    local LOC_EPC_VM_CMDS=$2

    if [ -d /opt/ltebox-archives/ ]
    then
        # Checking if all ltebox archives are available to run ltebx epc on a brand new VM
        if [ -f /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ] && [ -f /opt/ltebox-archives/etc-conf.zip ] && [ -f /opt/ltebox-archives/hss-sim.zip ]
        then
            echo "############################################################"
            echo "Test EPC on VM ($EPC_VM_NAME) will be using ltebox"
            echo "############################################################"
            LTEBOX=1
        fi
    fi
    # Here we could have other types of EPC detection

    # Do we need to start the EPC VM
    echo "EPC_VM_CMD_FILE     = $LOC_EPC_VM_CMDS"
    IS_EPC_VM_ALIVE=`uvt-kvm list | grep -c $LOC_EPC_VM_NAME`
    if [ $IS_EPC_VM_ALIVE -eq 0 ]
    then
        echo "############################################################"
        echo "Creating test EPC VM ($LOC_EPC_VM_NAME) on Ubuntu Cloud Image base"
        echo "############################################################"
320
        acquire_vm_create_lock
321
        uvt-kvm create $LOC_EPC_VM_NAME release=xenial --unsafe-caching
322 323 324 325 326 327
        echo "Waiting for VM to be started"
        uvt-kvm wait $LOC_EPC_VM_NAME --insecure
        release_vm_create_lock
    else
        echo "Waiting for VM to be started"
        uvt-kvm wait $LOC_EPC_VM_NAME --insecure
328 329 330
    fi

    local LOC_EPC_VM_IP_ADDR=`uvt-kvm ip $LOC_EPC_VM_NAME`
331

332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466
    echo "$LOC_EPC_VM_NAME has for IP addr = $LOC_EPC_VM_IP_ADDR"
    scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu

    # ltebox specific actions (install and start)
    LTE_BOX_TO_INSTALL=1
    if [ $LTEBOX -eq 1 ]
    then
        echo "ls -ls /opt/ltebox/tools/start_ltebox" > $LOC_EPC_VM_CMDS
        RESPONSE=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
        NB_EXES=`echo $RESPONSE | grep -c ltebox`
        if [ $NB_EXES -eq 1 ]; then LTE_BOX_TO_INSTALL=0; fi
    fi

    if [ $LTEBOX -eq 1 ] && [ $LTE_BOX_TO_INSTALL -eq 1 ]
    then
        echo "############################################################"
        echo "Copying ltebox archives into EPC VM ($LOC_EPC_VM_NAME)" 
        echo "############################################################"
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/etc-conf.zip ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/hss-sim.zip ubuntu@$LOC_EPC_VM_IP_ADDR:/home/ubuntu

        echo "############################################################"
        echo "Install EPC on EPC VM ($LOC_EPC_VM_NAME)"
        echo "############################################################"
        echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $LOC_EPC_VM_CMDS
        echo "touch /home/ubuntu/.hushlogin" >> $LOC_EPC_VM_CMDS
        echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $LOC_EPC_VM_CMDS
        echo "sudo apt-get update > zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS
        echo "sudo apt-get --yes install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf >> zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS

        # Installing HSS
        echo "echo \"cd /opt\"" >> $LOC_EPC_VM_CMDS
        echo "cd /opt" >> $LOC_EPC_VM_CMDS
        echo "echo \"sudo unzip -qq /home/ubuntu/hss-sim.zip\"" >> $LOC_EPC_VM_CMDS
        echo "sudo unzip -qq /home/ubuntu/hss-sim.zip" >> $LOC_EPC_VM_CMDS
        echo "echo \"cd /opt/hss_sim0609\"" >> $LOC_EPC_VM_CMDS
        echo "cd /opt/hss_sim0609" >> $LOC_EPC_VM_CMDS

        # Installing ltebox
        echo "echo \"cd /home/ubuntu\"" >> $LOC_EPC_VM_CMDS
        echo "cd /home/ubuntu" >> $LOC_EPC_VM_CMDS
        echo "echo \"sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb \"" >> $LOC_EPC_VM_CMDS
        echo "sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb >> zip-install.txt 2>&1" >> $LOC_EPC_VM_CMDS

        echo "echo \"cd /opt/ltebox/etc/\"" >> $LOC_EPC_VM_CMDS
        echo "cd /opt/ltebox/etc/" >> $LOC_EPC_VM_CMDS
        echo "echo \"sudo unzip -qq -o /home/ubuntu/etc-conf.zip\"" >> $LOC_EPC_VM_CMDS
        echo "sudo unzip -qq -o /home/ubuntu/etc-conf.zip" >> $LOC_EPC_VM_CMDS
        echo "sudo sed -i  -e 's#EPC_VM_IP_ADDRESS#$LOC_EPC_VM_IP_ADDR#' gw.conf" >> $LOC_EPC_VM_CMDS
        echo "sudo sed -i  -e 's#EPC_VM_IP_ADDRESS#$LOC_EPC_VM_IP_ADDR#' mme.conf" >> $LOC_EPC_VM_CMDS

        ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
        rm -f $LOC_EPC_VM_CMDS
    fi
}

function start_epc {
    local LOC_EPC_VM_NAME=$1
    local LOC_EPC_VM_CMDS=$2
    local LOC_EPC_VM_IP_ADDR=$3

    if [ $LTEBOX -eq 1 ]
    then
        echo "############################################################"
        echo "Start EPC on EPC VM ($LOC_EPC_VM_NAME)"
        echo "############################################################"
        echo "echo \"cd /opt/hss_sim0609\"" > $LOC_EPC_VM_CMDS
        echo "cd /opt/hss_sim0609" >> $LOC_EPC_VM_CMDS
        echo "echo \"sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real\"" >> $LOC_EPC_VM_CMDS
        echo "sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real" >> $LOC_EPC_VM_CMDS

        echo "echo \"cd /opt/ltebox/tools/\"" >> $LOC_EPC_VM_CMDS
        echo "cd /opt/ltebox/tools/" >> $LOC_EPC_VM_CMDS
        echo "echo \"sudo ./start_ltebox\"" >> $LOC_EPC_VM_CMDS
        echo "nohup sudo ./start_ltebox > /home/ubuntu/ltebox.txt" >> $LOC_EPC_VM_CMDS

        ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS
        rm -f $LOC_EPC_VM_CMDS

        i="0"
        echo "ifconfig tun5 | egrep -c \"inet addr\"" > $LOC_EPC_VM_CMDS
        while [ $i -lt 10 ]
        do
            sleep 2
            CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
            if [ $CONNECTED -eq 1 ]
            then
                i="100"
            else
                i=$[$i+1]
            fi
        done
        rm $LOC_EPC_VM_CMDS
        if [ $i -lt 50 ]
        then
            echo "Problem w/ starting ltebox EPC"
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
            exit -1
        fi
    fi

    # HERE ADD ANY INSTALL ACTIONS FOR ANOTHER EPC

}

function retrieve_real_epc_ip_addr {
    local LOC_EPC_VM_NAME=$1
    local LOC_EPC_VM_CMDS=$2
    local LOC_EPC_VM_IP_ADDR=$3

    if [ $LTEBOX -eq 1 ]
    then
        # in our configuration file, we are using pool 5
        echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $LOC_EPC_VM_CMDS
        REAL_EPC_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_EPC_VM_IP_ADDR < $LOC_EPC_VM_CMDS`
        echo "EPC IP Address     is : $REAL_EPC_IP_ADDR"
        rm $LOC_EPC_VM_CMDS
    fi
}

function terminate_epc {
    if [ $LTEBOX -eq 1 ]
    then
        echo "echo \"cd /opt/ltebox/tools\"" > $1
        echo "cd /opt/ltebox/tools" >> $1
        echo "echo \"sudo ./stop_ltebox\"" >> $1
        echo "sudo ./stop_ltebox" >> $1
        echo "echo \"sudo daemon --name=simulated_hss --stop\"" >> $1
        echo "sudo daemon --name=simulated_hss --stop" >> $1
        echo "echo \"sudo killall --signal SIGKILL hss_sim\"" >> $1
        echo "sudo killall --signal SIGKILL hss_sim" >> $1
        ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
        rm $1
    fi
467 468
}

469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497
function start_flexran_ctrl {
    echo "cd /home/ubuntu/tmp" > $1
    echo "if [ -f cmake_targets/log/flexran_ctl_run.log ]; then rm -f cmake_targets/log/flexran_ctl_run.log cmake_targets/log/flexran_ctl_query*.log; fi" >> $1
    echo "echo \" sudo build/rt_controller -c log_config/basic_log\"" >> $1
    echo "nohup sudo build/rt_controller -c log_config/basic_log > cmake_targets/log/flexran_ctl_run.log 2>&1 &" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
    sleep 10
}

function stop_flexran_ctrl {
    echo "echo \"sudo killall --signal SIGKILL rt_controller\"" > $1
    echo "sudo killall --signal SIGKILL rt_controller" > $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
    sleep 2
}

function query_flexran_ctrl_status {
    local LOC_MESSAGE=$3
    echo "cd /home/ubuntu/tmp" > $1
    echo "echo \"------------------------------------------------------------\" > cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
    echo "echo \"LOG_NAME: $LOC_MESSAGE\" >> cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
    echo "echo \"------------------------------------------------------------\" >> cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
    echo "curl http://localhost:9999/stats | jq '.' | tee -a cmake_targets/log/flexran_ctl_query_${LOC_MESSAGE}.log" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
}

498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555
function build_ue_on_separate_folder {
    echo "mkdir tmp-ue" > $1
    echo "cd tmp-ue" >> $1
    echo "echo \"unzip -qq -DD ../localZip.zip\"" >> $1
    echo "unzip -qq -DD ../localZip.zip" >> $1

    # We may have some adaptation to do
    if [ -f /opt/ltebox-archives/adapt_ue_l2_sim.txt ]
    then
        echo "############################################################"
        echo "Doing some adaptation on UE side"
        echo "############################################################"
        cat /opt/ltebox-archives/adapt_ue_l2_sim.txt >> $1
    fi

    echo "echo \"source oaienv\"" >> $1
    echo "source oaienv" >> $1
    echo "cd cmake_targets/" >> $1
    echo "mkdir log" >> $1
    echo "chmod 777 log" >> $1
    echo "echo \"./build_oai --UE -t ETHERNET \"" >> $1
    echo "./build_oai --UE -t ETHERNET > log/ue-build.txt 2>&1" >> $1
    echo "cd tools" >> $1
    echo "sudo ifconfig lo: 127.0.0.2 netmask 255.0.0.0 up" >> $1
    echo "sudo chmod 666 /etc/iproute2/rt_tables" >> $1
    echo "source init_nas_s1 UE" >> $1
    echo "ifconfig" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

function start_l2_sim_enb {
    local LOC_VM_IP_ADDR=$2
    local LOC_EPC_IP_ADDR=$3
    local LOC_LOG_FILE=$4
    local LOC_NB_RBS=$5
    local LOC_CONF_FILE=$6
    echo "cd /home/ubuntu/tmp" > $1
    echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
    echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
    echo "echo \"source oaienv\"" >> $1
    echo "source oaienv" >> $1
    echo "cd ci-scripts/conf_files/" >> $1
    echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
    echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL                                         = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
    echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
    echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/\"" >> $1
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
    echo "cd /home/ubuntu/tmp/cmake_targets/lte_build_oai/build/" >> $1
    echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
    echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
    echo "cat ./my-lte-softmodem-run.sh" >> $1
    echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
    echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1

    ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
    rm $1
556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578

    local i="0"
    echo "egrep -c \"Waiting for PHY_config_req\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
    while [ $i -lt 10 ]
    do
        sleep 5
        CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1`
        if [ $CONNECTED -ne 0 ]
        then
            i="100"
        else
            i=$[$i+1]
        fi
    done
    rm $1
    if [ $i -lt 50 ]
    then
        ENB_SYNC=0
        echo "L2-SIM eNB is NOT sync'ed: process still alive?"
    else
        ENB_SYNC=1
        echo "L2-SIM eNB is sync'ed: waiting for UE(s) to connect"
    fi
579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595
}

function start_l2_sim_ue {
    local LOC_VM_IP_ADDR=$2
    local LOC_LOG_FILE=$3
    local LOC_CONF_FILE=$4
    echo "echo \"cd /home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/\"" >> $1
    echo "sudo chmod 777 /home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/" >> $1
    echo "cd /home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/" >> $1
    echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -O /home/ubuntu/tmp-ue/ci-scripts/conf_files/$LOC_CONF_FILE --L2-emul 3 --num-ues 1\" > ./my-lte-softmodem-run.sh " >> $1
    echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
    echo "cat ./my-lte-softmodem-run.sh" >> $1
    echo "if [ -e /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ]; then sudo sudo rm -f /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE; fi" >> $1
    echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp-ue/cmake_targets/lte_build_oai/build/ -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1

    ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
    rm $1
596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613

    local i="0"
    echo "egrep -c \"Received NFAPI_START_REQ\" /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE" > $1
    while [ $i -lt 10 ]
    do
        sleep 5
        CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1`
        if [ $CONNECTED -eq 1 ]
        then
            i="100"
        else
            i=$[$i+1]
        fi
    done
    rm $1
    if [ $i -lt 50 ]
    then
        UE_SYNC=0
614 615
        echo "L2-SIM UE is NOT sync'ed w/ eNB"
        return
616 617
    else
        UE_SYNC=1
618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641
        echo "L2-SIM UE is sync'ed w/ eNB"
    fi
    # Checking oip1 interface has now an IP address
    i="0"
    echo "ifconfig oip1 | egrep -c \"inet addr\"" > $1
    while [ $i -lt 10 ]
    do
        sleep 5
        CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1`
        if [ $CONNECTED -eq 1 ]
        then
            i="100"
        else
            i=$[$i+1]
        fi
    done
    rm $1
    if [ $i -lt 50 ]
    then
        UE_SYNC=0
        echo "L2-SIM UE oip1 is NOT sync'ed w/ EPC"
    else
        UE_SYNC=1
        echo "L2-SIM UE oip1 is sync'ed w/ EPC"
642 643
    fi
    sleep 10
644 645
}

646
function run_test_on_vm {
647
    echo "############################################################"
648
    echo "OAI CI VM script"
649
    echo "############################################################"
650 651 652 653
    echo "VM_NAME             = $VM_NAME"
    echo "VM_CMD_FILE         = $VM_CMDS"
    echo "JENKINS_WKSP        = $JENKINS_WKSP"
    echo "ARCHIVES_LOC        = $ARCHIVES_LOC"
654 655

    echo "############################################################"
656
    echo "Waiting for VM to be started"
657
    echo "############################################################"
658
    uvt-kvm wait $VM_NAME --insecure
659

660 661
    VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
    echo "$VM_NAME has for IP addr = $VM_IP_ADDR"
662

663
    if [ "$RUN_OPTIONS" == "none" ]
664
    then
665 666
        echo "No run on VM testing for this variant currently"
        exit $STATUS
667
    fi
668

669
    if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
670 671
    then
        echo "############################################################"
672
        echo "Running test script on VM ($VM_NAME)"
673
        echo "############################################################"
674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690
        echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
        echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
        echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
        echo "cd tmp" >> $VM_CMDS
        echo "echo \"source oaienv\"" >> $VM_CMDS
        echo "source oaienv" >> $VM_CMDS
        echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
        echo "cd cmake_targets/autotests" >> $VM_CMDS
        echo "echo \"rm -Rf log\"" >> $VM_CMDS
        echo "rm -Rf log" >> $VM_CMDS
        echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
        echo "$RUN_OPTIONS" >> $VM_CMDS
        echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
        echo "cd log" >> $VM_CMDS
        echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS

        ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS
691

692 693 694
        echo "############################################################"
        echo "Creating a tmp folder to store results and artifacts"
        echo "############################################################"
695

696 697 698 699 700
        if [ -d $ARCHIVES_LOC ]
        then
            rm -Rf $ARCHIVES_LOC
        fi
        mkdir --parents $ARCHIVES_LOC
701

702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
        pushd $ARCHIVES_LOC
        unzip -qq -DD tmp.zip
        rm tmp.zip
        if [ -f results_autotests.xml ]
        then
            FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
            NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
            echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
            echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
            cat results_autotests.xml >> $NEW_NAME
            sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
            #mv results_autotests.xml $NEW_NAME
            rm results_autotests.xml
        fi
        popd
718

719
        if [ $KEEP_VM_ALIVE -eq 0 ]
720 721
        then
            echo "############################################################"
722
            echo "Destroying VM"
723
            echo "############################################################"
724 725
            uvt-kvm destroy $VM_NAME
            ssh-keygen -R $VM_IP_ADDR
726
        fi
727
        rm -f $VM_CMDS
728 729

        echo "############################################################"
730
        echo "Checking run status"
731 732
        echo "############################################################"

733 734 735 736
        LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
        NB_FOUND_FILES=0
        NB_RUNS=0
        NB_FAILURES=0
737

738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763
        for FULLFILE in $LOG_FILES
        do
            TESTSUITES=`egrep "testsuite errors" $FULLFILE`
            for TESTSUITE in $TESTSUITES
            do
                if [[ "$TESTSUITE" == *"tests="* ]]
                then
                    RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
                    NB_RUNS=$((NB_RUNS + RUNS))
                fi
                if [[ "$TESTSUITE" == *"failures="* ]]
                then
                    FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
                    NB_FAILURES=$((NB_FAILURES + FAILS))
                fi
            done
            NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
        done

        echo "NB_FOUND_FILES = $NB_FOUND_FILES"
        echo "NB_RUNS        = $NB_RUNS"
        echo "NB_FAILURES    = $NB_FAILURES"

        if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
        if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
        if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi
764

765 766 767 768 769 770
        if [ $STATUS -eq 0 ]
        then
            echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
        else
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
        fi
771 772
    fi

773
    if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
774
    then
775 776 777 778 779 780 781
        PING_STATUS=0
        IPERF_STATUS=0
        if [ -d $ARCHIVES_LOC ]
        then
            rm -Rf $ARCHIVES_LOC
        fi
        mkdir --parents $ARCHIVES_LOC
782

783
        # Creating a VM for EPC and installing SW
784
        EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
785
        EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
786
        LTEBOX=0
787
        install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
788 789
        EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`

790 791
        # Starting EPC
        start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
792

793 794
        # Retrieve EPC real IP address
        retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR
795

796 797
        # We may have some adaptation to do
        if [ -f /opt/ltebox-archives/adapt_ue_sim.txt ]
798 799
        then
            echo "############################################################"
800
            echo "Doing some adaptation on UE side"
801
            echo "############################################################"
802
            ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < /opt/ltebox-archives/adapt_ue_sim.txt
803 804 805 806 807 808
        fi

        echo "############################################################"
        echo "Starting the eNB in FDD-5MHz mode"
        echo "############################################################"
        CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
809
        start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf none
810 811 812 813 814 815 816 817 818 819 820 821 822

        echo "############################################################"
        echo "Starting the UE in FDD-5MHz mode"
        echo "############################################################"
        CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
        start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
        if [ $UE_SYNC -eq 0 ]
        then
            echo "Problem w/ eNB and UE not syncing"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
823
            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
824
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
825 826
            exit -1
        fi
827
        get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
828

829 830 831 832 833 834 835
        echo "############################################################"
        echo "Pinging the UE"
        echo "############################################################"
        PING_LOG_FILE=fdd_05MHz_ping_ue.txt
        ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
836

837 838 839 840 841 842 843 844
        echo "############################################################"
        echo "Iperf DL"
        echo "############################################################"
        CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_dl
        iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
845

846 847 848 849 850 851 852 853
        echo "############################################################"
        echo "Iperf UL"
        echo "############################################################"
        CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_ul
        iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2
854

855 856 857
        echo "############################################################"
        echo "Terminate enb/ue simulators"
        echo "############################################################"
858 859 860
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
861
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
862
        sleep 10
863

864 865 866 867
        echo "############################################################"
        echo "Starting the eNB in FDD-10MHz mode"
        echo "############################################################"
        CURRENT_ENB_LOG_FILE=fdd_10MHz_enb.log
868
        start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-fdd-basic-sim.conf none
869

870 871 872 873 874 875 876 877 878 879 880 881
        echo "############################################################"
        echo "Starting the UE in FDD-10MHz mode"
        echo "############################################################"
        CURRENT_UE_LOG_FILE=fdd_10MHz_ue.log
        start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2680
        if [ $UE_SYNC -eq 0 ]
        then
            echo "Problem w/ eNB and UE not syncing"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
882
            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
883
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
884 885 886
            exit -1
        fi
        get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
887

888 889 890 891 892 893 894
        echo "############################################################"
        echo "Pinging the UE"
        echo "############################################################"
        PING_LOG_FILE=fdd_10MHz_ping_ue.txt
        ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
895

896 897 898 899 900 901 902 903
        echo "############################################################"
        echo "Iperf DL"
        echo "############################################################"
        CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_dl
        iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
904

905 906 907 908 909 910 911 912
        echo "############################################################"
        echo "Iperf UL"
        echo "############################################################"
        CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_ul
        iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2
913

914 915 916
        echo "############################################################"
        echo "Terminate enb/ue simulators"
        echo "############################################################"
917
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
918 919
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
920
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
921
        sleep 10
922

923 924 925 926
        echo "############################################################"
        echo "Starting the eNB in FDD-20MHz mode"
        echo "############################################################"
        CURRENT_ENB_LOG_FILE=fdd_20MHz_enb.log
927
        start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-fdd-basic-sim.conf none
928

929 930 931 932 933 934 935 936 937 938 939 940
        echo "############################################################"
        echo "Starting the UE in FDD-20MHz mode"
        echo "############################################################"
        CURRENT_UE_LOG_FILE=fdd_20MHz_ue.log
        start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2680
        if [ $UE_SYNC -eq 0 ]
        then
            echo "Problem w/ eNB and UE not syncing"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
941
            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
942
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
943 944 945
            exit -1
        fi
        get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
946

947 948 949 950 951 952 953
        echo "############################################################"
        echo "Pinging the UE"
        echo "############################################################"
        PING_LOG_FILE=fdd_20MHz_ping_ue.txt
        ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
954

955 956 957 958 959 960 961 962
        echo "############################################################"
        echo "Iperf DL"
        echo "############################################################"
        CURR_IPERF_LOG_BASE=fdd_20MHz_iperf_dl
        iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
963

964 965 966
        echo "############################################################"
        echo "Terminate enb/ue simulators"
        echo "############################################################"
967 968 969
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
970
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
971
        sleep 10
972

973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992
        if [ -d $JENKINS_WKSP/flexran ]
        then
            echo "############################################################"
            echo "Flexran testing is possible"
            echo "############################################################"
            local j="0"
            while [ $j -lt 20 ]
            do
                if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
                then
                    echo "Found an proper flexran controller vm build"
                    j="100"
                else
                    j=$[$j+1]
                    sleep 30
                fi
            done
            if [ $j -lt 50 ]
            then
                echo "ERROR: compiling flexran controller on vm went wrong"
993
                terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
994
                echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
995 996 997 998 999 1000 1001 1002
                exit -1
            fi
            FLEXRAN_CTL_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#flexran-rtc#"`
            FLEXRAN_CTL_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#flexran-rtc-cmds#"`
            IS_FLEXRAN_VM_ALIVE=`uvt-kvm list | grep -c $FLEXRAN_CTL_VM_NAME`
            if [ $IS_FLEXRAN_VM_ALIVE -eq 0 ]
            then
                echo "ERROR: Flexran Ctl VM is not alive"
1003
                terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1004
                echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036
                exit -1
            fi
            uvt-kvm wait $FLEXRAN_CTL_VM_NAME --insecure
            FLEXRAN_CTL_VM_IP_ADDR=`uvt-kvm ip $FLEXRAN_CTL_VM_NAME`

            echo "$FLEXRAN_CTL_VM_NAME has for IP addr = $FLEXRAN_CTL_VM_IP_ADDR"
            echo "FLEXRAN_CTL_VM_CMDS     = $FLEXRAN_CTL_VM_CMDS"
            echo "############################################################"
            echo "Starting the FLEXRAN CONTROLLER"
            echo "############################################################"
            start_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
            query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 01_no_enb_connected

            echo "############################################################"
            echo "Starting the eNB in FDD-5MHz mode with Flexran ON"
            echo "############################################################"
            CURRENT_ENB_LOG_FILE=fdd_05fMHz_enb.log
            start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf $FLEXRAN_CTL_VM_IP_ADDR
            query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 02_enb_connected

            echo "############################################################"
            echo "Starting the UE in FDD-5MHz mode"
            echo "############################################################"
            CURRENT_UE_LOG_FILE=fdd_05fMHz_ue.log
            start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
            if [ $UE_SYNC -eq 0 ]
            then
                echo "Problem w/ eNB and UE not syncing"
                terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
                scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
                scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
                recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1037
                terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1038
                stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
1039
                echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061
                exit -1
            fi
            query_flexran_ctrl_status $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR 03_enb_ue_connected
            get_ue_ip_addr $VM_CMDS $VM_IP_ADDR

            sleep 30
            echo "############################################################"
            echo "Terminate enb/ue simulators"
            echo "############################################################"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            sleep 10

            echo "############################################################"
            echo "Stopping the FLEXRAN CONTROLLER"
            echo "############################################################"
            stop_flexran_ctrl $FLEXRAN_CTL_VM_CMDS $FLEXRAN_CTL_VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$FLEXRAN_CTL_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/flexran_ctl_*.log $ARCHIVES_LOC
        fi

1062 1063 1064 1065
        echo "############################################################"
        echo "Starting the eNB in TDD-5MHz mode"
        echo "############################################################"
        CURRENT_ENB_LOG_FILE=tdd_05MHz_enb.log
1066
        start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-tdd-basic-sim.conf none
1067

1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079
        echo "############################################################"
        echo "Starting the UE in TDD-5MHz mode"
        echo "############################################################"
        CURRENT_UE_LOG_FILE=tdd_05MHz_ue.log
        start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2350
        if [ $UE_SYNC -eq 0 ]
        then
            echo "Problem w/ eNB and UE not syncing"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1080
            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1081
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
1082 1083 1084
            exit -1
        fi
        get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
1085

1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102
        echo "############################################################"
        echo "Pinging the UE"
        echo "############################################################"
        PING_LOG_FILE=tdd_05MHz_ping_ue.txt
        ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20

#        Bug in TDD 5Mhz --- not running it
#        echo "############################################################"
#        echo "Iperf DL"
#        echo "############################################################"
#        CURR_IPERF_LOG_BASE=tdd_05MHz_iperf_dl
#        iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
#        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
#        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
#        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
1103

1104 1105 1106
        echo "############################################################"
        echo "Terminate enb/ue simulators"
        echo "############################################################"
1107 1108 1109 1110
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1111
        sleep 10
1112

1113 1114 1115 1116
        echo "############################################################"
        echo "Starting the eNB in TDD-10MHz mode"
        echo "############################################################"
        CURRENT_ENB_LOG_FILE=tdd_10MHz_enb.log
1117
        start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-tdd-basic-sim.conf none
Raphael Defosseux's avatar
Raphael Defosseux committed
1118

1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130
        echo "############################################################"
        echo "Starting the UE in TDD-10MHz mode"
        echo "############################################################"
        CURRENT_UE_LOG_FILE=tdd_10MHz_ue.log
        start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2350
        if [ $UE_SYNC -eq 0 ]
        then
            echo "Problem w/ eNB and UE not syncing"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1131
            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1132
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
1133 1134 1135
            exit -1
        fi
        get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
1136

1137 1138 1139 1140 1141 1142 1143
        echo "############################################################"
        echo "Pinging the UE"
        echo "############################################################"
        PING_LOG_FILE=tdd_10MHz_ping_ue.txt
        ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
1144

1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156
        echo "############################################################"
        echo "Iperf DL"
        echo "############################################################"
        CURR_IPERF_LOG_BASE=tdd_10MHz_iperf_dl
        iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6

        echo "############################################################"
        echo "Terminate enb/ue simulators"
        echo "############################################################"
1157 1158 1159 1160
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1161
        sleep 10
1162

1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181
# Disabling TDD-20MHz in order to stop getting false negatives
#        echo "############################################################"
#        echo "Starting the eNB in TDD-20MHz mode"
#        echo "############################################################"
#        CURRENT_ENB_LOG_FILE=tdd_20MHz_enb.log
#        start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-tdd-basic-sim.conf none
#
#        echo "############################################################"
#        echo "Starting the UE in TDD-20MHz mode"
#        echo "############################################################"
#        CURRENT_UE_LOG_FILE=tdd_20MHz_ue.log
#        start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2350
#        if [ $UE_SYNC -eq 0 ]
#        then
#            echo "Problem w/ eNB and UE not syncing"
#            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
#            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
#            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
#            recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1182
#            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212
#            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
#            exit -1
#        fi
#        get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
#
#        echo "############################################################"
#        echo "Pinging the UE"
#        echo "############################################################"
#        PING_LOG_FILE=tdd_20MHz_ping_ue.txt
#        ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
#        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
#        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
#
#        echo "############################################################"
#        echo "Iperf DL"
#        echo "############################################################"
#        CURR_IPERF_LOG_BASE=tdd_20MHz_iperf_dl
#        iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
#        scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
#        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
#        check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
#
#        echo "############################################################"
#        echo "Terminate enb/ue simulators"
#        echo "############################################################"
#        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
#        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
#        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
#        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
#        sleep 10
1213

1214 1215 1216
        echo "############################################################"
        echo "Terminate EPC"
        echo "############################################################"
1217

1218
        terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
1219

1220 1221 1222 1223 1224 1225 1226 1227 1228
        if [ $KEEP_VM_ALIVE -eq 0 ]
        then
            echo "############################################################"
            echo "Destroying VMs"
            echo "############################################################"
            uvt-kvm destroy $VM_NAME
            ssh-keygen -R $VM_IP_ADDR
            uvt-kvm destroy $EPC_VM_NAME
            ssh-keygen -R $EPC_VM_IP_ADDR
1229 1230 1231 1232 1233
            if [ -e $JENKINS_WKSP/flexran/flexran_build_complete.txt ]
            then
                uvt-kvm destroy $FLEXRAN_CTL_VM_NAME
                ssh-keygen -R $FLEXRAN_CTL_VM_IP_ADDR
            fi
1234
        fi
1235

1236 1237 1238
        echo "############################################################"
        echo "Checking run status"
        echo "############################################################"
1239

1240 1241 1242
        if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
        if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi

1243 1244 1245 1246 1247 1248
        if [ $STATUS -eq 0 ]
        then
            echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
        else
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
        fi
1249
    fi
1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287

    if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-l2-sim.* ]]
    then
        PING_STATUS=0
        IPERF_STATUS=0
        if [ -d $ARCHIVES_LOC ]
        then
            rm -Rf $ARCHIVES_LOC
        fi
        mkdir --parents $ARCHIVES_LOC

        # Building UE elsewhere in VM
        build_ue_on_separate_folder $VM_CMDS $VM_IP_ADDR

        # Creating a VM for EPC and installing SW
        EPC_VM_NAME=`echo $VM_NAME | sed -e "s#l2-sim#l2-epc#"`
        EPC_VM_CMDS=${EPC_VM_NAME}_cmds.txt
        LTEBOX=0
        install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
        EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`

        # Starting EPC
        start_epc $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR

        # Retrieve EPC real IP address
        retrieve_real_epc_ip_addr $EPC_VM_NAME $EPC_VM_CMDS $EPC_VM_IP_ADDR

        echo "############################################################"
        echo "Starting the eNB in FDD-5MHz mode"
        echo "############################################################"
        CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
        start_l2_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 rcc.band7.tm1.nfapi.conf

        echo "############################################################"
        echo "Starting the UEs"
        echo "############################################################"
        CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
        start_l2_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE ue.nfapi.conf
1288 1289 1290 1291 1292 1293 1294 1295 1296 1297
        if [ $UE_SYNC -eq 0 ]
        then
            echo "Problem w/ eNB and UE not syncing"
            terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
            scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
            terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
            exit -1
        fi
1298

1299 1300 1301 1302 1303 1304 1305
        echo "############################################################"
        echo "Pinging the EPC from UE"
        echo "############################################################"
        PING_LOG_FILE=fdd_05MHz_ping_epc.txt
        ping_epc_ip_addr $VM_CMDS $VM_IP_ADDR $REAL_EPC_IP_ADDR $PING_LOG_FILE
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
        check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330

        echo "############################################################"
        echo "Terminate enb/ue simulators"
        echo "############################################################"
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC

        echo "############################################################"
        echo "Terminate EPC"
        echo "############################################################"

        terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR

        if [ $KEEP_VM_ALIVE -eq 0 ]
        then
            echo "############################################################"
            echo "Destroying VMs"
            echo "############################################################"
            uvt-kvm destroy $VM_NAME
            ssh-keygen -R $VM_IP_ADDR
            uvt-kvm destroy $EPC_VM_NAME
            ssh-keygen -R $EPC_VM_IP_ADDR
        fi

1331 1332 1333 1334 1335
        echo "############################################################"
        echo "Checking run status"
        echo "############################################################"

        if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
1336 1337 1338 1339 1340 1341 1342
        if [ $STATUS -eq 0 ]
        then
            echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
        else
            echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
        fi
    fi
1343
}