runTestOnVM.sh 44.7 KB
Newer Older
1
#!/bin/bash
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */
22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

function usage {
    echo "OAI VM Test Run script"
    echo "   Original Author: Raphael Defosseux"
    echo "   Default:"
    echo "     -- eNB with USRP"
    echo ""
    echo "Usage:"
    echo "------"
    echo "    runTestOnVM.sh [OPTIONS]"
    echo ""
    echo "Options:"
    echo "--------"
    echo "    --job-name #### OR -jn ####"
    echo "    Specify the name of the Jenkins job."
    echo ""
    echo "    --build-id #### OR -id ####"
    echo "    Specify the build ID of the Jenkins job."
    echo ""
    echo "    --workspace #### OR -ws ####"
    echo "    Specify the workspace."
    echo ""
    echo "    --variant enb-usrp     OR -v1"
    echo "    --variant basic-sim    OR -v2"
    echo "    --variant phy-sim      OR -v3"
    echo "    --variant cppcheck     OR -v4"
    echo "    --variant enb-ethernet OR -v7"
    echo "    --variant ue-ethernet  OR -v8"
    echo "    Specify the variant to build."
    echo ""
    echo "    --keep-vm-alive OR -k"
    echo "    Keep the VM alive after the build."
    echo ""
    echo "    --help OR -h"
    echo "    Print this help message."
    echo ""
}

function variant_usage {
    echo "OAI VM Test Run script"
    echo "   Original Author: Raphael Defosseux"
    echo ""
    echo "    --variant enb-usrp     OR -v1"
    echo "    --variant basic-sim    OR -v2"
    echo "    --variant phy-sim      OR -v3"
    echo "    --variant cppcheck     OR -v4"
    echo "    --variant enb-ethernet OR -v7"
    echo "    --variant ue-ethernet  OR -v8"
    echo ""
}

73 74 75 76 77
function start_basic_sim_enb {
    local LOC_VM_IP_ADDR=$2
    local LOC_EPC_IP_ADDR=$3
    local LOC_LOG_FILE=$4
    local LOC_NB_RBS=$5
78
    local LOC_CONF_FILE=$6
79 80 81 82 83 84 85 86
    echo "cd /home/ubuntu/tmp" > $1
    echo "echo \"sudo apt-get --yes --quiet install daemon \"" >> $1
    echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
    echo "echo \"export ENODEB=1\"" >> $1
    echo "export ENODEB=1" >> $1
    echo "echo \"source oaienv\"" >> $1
    echo "source oaienv" >> $1
    echo "cd ci-scripts/conf_files/" >> $1
87 88 89 90
    echo "cp $LOC_CONF_FILE ci-$LOC_CONF_FILE" >> $1
    echo "sed -i -e 's#N_RB_DL.*=.*;#N_RB_DL                                         = $LOC_NB_RBS;#' -e 's#CI_MME_IP_ADDR#$LOC_EPC_IP_ADDR#' -e 's#CI_ENB_IP_ADDR#$LOC_VM_IP_ADDR#' ci-$LOC_CONF_FILE" >> $1
    echo "echo \"grep N_RB_DL ci-$LOC_CONF_FILE\"" >> $1
    echo "grep N_RB_DL ci-$LOC_CONF_FILE | sed -e 's#N_RB_DL.*=#N_RB_DL =#'" >> $1
91
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/\"" >> $1
92 93
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator" >> $1
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
94
    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb/" >> $1
95
    echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE\" > ./my-lte-softmodem-run.sh " >> $1
96 97 98 99 100
    echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
    echo "cat ./my-lte-softmodem-run.sh" >> $1
    echo "sudo -E daemon --inherit --unsafe --name=enb_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/enb -o /home/ubuntu/tmp/cmake_targets/log/$LOC_LOG_FILE ./my-lte-softmodem-run.sh" >> $1

    ssh -o StrictHostKeyChecking=no ubuntu@$LOC_VM_IP_ADDR < $1
101
    sleep 10
102 103 104 105 106 107
    rm $1
}

function start_basic_sim_ue {
    local LOC_UE_LOG_FILE=$3
    local LOC_NB_RBS=$4
108
    local LOC_FREQUENCY=$5
109
    echo "echo \"cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue\"" > $1
110 111
    echo "sudo chmod 777 /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
    echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/ue" >> $1
112
    echo "echo \"./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_NB_RBS --ue-rxgain 140\" > ./my-lte-uesoftmodem-run.sh" >> $1
113 114 115 116 117 118 119 120 121
    echo "chmod 775 ./my-lte-uesoftmodem-run.sh" >> $1
    echo "cat ./my-lte-uesoftmodem-run.sh" >> $1
    echo "sudo -E daemon --inherit --unsafe --name=ue_daemon --chdir=/home/ubuntu/tmp/cmake_targets/basic_simulator/ue -o /home/ubuntu/tmp/cmake_targets/log/$LOC_UE_LOG_FILE ./my-lte-uesoftmodem-run.sh" >> $1

    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1

    local i="0"
    echo "ifconfig oip1 | egrep -c \"inet addr\"" > $1
122
    while [ $i -lt 10 ]
123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243
    do
        sleep 5
        CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1`
        if [ $CONNECTED -eq 1 ]
        then
            i="100"
        else
            i=$[$i+1]
        fi
    done
    rm $1
    if [ $i -lt 50 ]
    then
        UE_SYNC=0
    else
        UE_SYNC=1
    fi
}

function get_ue_ip_addr {
    echo "ifconfig oip1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $1
    UE_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1`
    echo "UE IP Address for EPC is : $UE_IP_ADDR"
    rm $1
}

function ping_ue_ip_addr {
    echo "echo \"ping -c 20 $3\"" > $1
    echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1
    echo "ping -c 20 $UE_IP_ADDR | tee -a $4" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

function check_ping_result {
    local LOC_PING_FILE=$1
    local LOC_NB_PINGS=$2
    if [ -f $LOC_PING_FILE ]
    then
        local FILE_COMPLETE=`egrep -c "ping statistics" $LOC_PING_FILE`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            PING_STATUS=-1
        else
            local ALL_PACKET_RECEIVED=`egrep -c "$LOC_NB_PINGS received" $LOC_PING_FILE`
            if [ $ALL_PACKET_RECEIVED -eq 1 ]
            then
                echo "got all ping packets"
            else
                PING_STATUS=-1
            fi
        fi
    else
        PING_STATUS=-1
    fi
}

function iperf_dl {
    local REQ_BANDWIDTH=$5
    local BASE_LOG_FILE=$6
    echo "echo \"iperf -u -s -i 1\"" > $1
    echo "echo \"COMMAND IS: iperf -u -s -i 1\" > tmp/cmake_targets/log/${BASE_LOG_FILE}_server.txt" > $1
    echo "nohup iperf -u -s -i 1 >> tmp/cmake_targets/log/${BASE_LOG_FILE}_server.txt &" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1

    echo "echo \"iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\"" > $3
    echo "echo \"COMMAND IS: iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\" > ${BASE_LOG_FILE}_client.txt" > $3
    echo "iperf -c $UE_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1 | tee -a ${BASE_LOG_FILE}_client.txt" >> $3
    ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
    rm -f $3

    echo "killall --signal SIGKILL iperf" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
}

function iperf_ul {
    local REQ_BANDWIDTH=$5
    local BASE_LOG_FILE=$6
    echo "echo \"iperf -u -s -i 1\"" > $3
    echo "echo \"COMMAND IS: iperf -u -s -i 1\" > ${BASE_LOG_FILE}_server.txt" > $3
    echo "nohup iperf -u -s -i 1 >> ${BASE_LOG_FILE}_server.txt &" >> $3
    ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
    rm $3

    echo "echo \"iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\"" > $1
    echo "echo \"COMMAND IS: iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1\" > /home/ubuntu/tmp/cmake_targets/log/${BASE_LOG_FILE}_client.txt" > $1
    echo "iperf -c $REAL_EPC_IP_ADDR -u -t 30 -b ${REQ_BANDWIDTH}M -i 1 | tee -a /home/ubuntu/tmp/cmake_targets/log/${BASE_LOG_FILE}_client.txt" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1

    echo "killall --signal SIGKILL iperf" >> $3
    ssh -o StrictHostKeyChecking=no ubuntu@$4 < $3
    rm $3
}

function check_iperf {
    local LOC_BASE_LOG=$1
    local LOC_REQ_BW=$2
    local LOC_REQ_BW_MINUS_ONE=`echo "$LOC_REQ_BW - 1" | bc -l`
    if [ -f ${LOC_BASE_LOG}_client.txt ]
    then
        local FILE_COMPLETE=`egrep -c "Server Report" ${LOC_BASE_LOG}_client.txt`
        if [ $FILE_COMPLETE -eq 0 ]
        then
            IPERF_STATUS=-1
        else
            local EFFECTIVE_BANDWIDTH=`tail -n3 ${LOC_BASE_LOG}_client.txt | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
            if [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW}.*Mbits.* ]] || [[ $EFFECTIVE_BANDWIDTH =~ .*${LOC_REQ_BW_MINUS_ONE}.*Mbits.* ]]
            then
                echo "got requested DL bandwidth: $EFFECTIVE_BANDWIDTH"
            else
                IPERF_STATUS=-1
            fi
        fi
    else
        IPERF_STATUS=-1
    fi
}

244
function terminate_enb_ue_basic_sim {
245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266
    echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" > $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=enb_daemon --stop\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=enb_daemon --stop; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo daemon --name=ue_daemon --stop\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo daemon --name=ue_daemon --stop; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
    echo "echo \"ps -aux | grep softmodem\"" >> $1
    echo "ps -aux | grep softmodem | grep -v grep" >> $1
    echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGINT lte-softmodem\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGINT lte-softmodem; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
    echo "echo \"ps -aux | grep softmodem\"" >> $1
    echo "ps -aux | grep softmodem | grep -v grep" >> $1
    echo "NB_OAI_PROCESSES=\`ps -aux | grep modem | grep -v grep | grep -c softmodem\`" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-softmodem\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-softmodem; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then echo \"sudo killall --signal SIGKILL lte-uesoftmodem\"; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sudo killall --signal SIGKILL lte-uesoftmodem; fi" >> $1
    echo "if [ \$NB_OAI_PROCESSES -ne 0 ]; then sleep 5; fi" >> $1
    echo "echo \"ps -aux | grep softmodem\"" >> $1
    echo "ps -aux | grep softmodem | grep -v grep" >> $1
267 268 269 270
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm -f $1
}

271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288
function recover_core_dump {
    local IS_SEG_FAULT=`egrep -ic "segmentation fault" $3`
    if [ $IS_SEG_FAULT -ne 0 ]
    then
        local TC=`echo $3 | sed -e "s#^.*enb_##" -e "s#Hz.*#Hz#"`
        echo "Segmentation fault detected on enb -> recovering core dump"
        echo "cd /home/ubuntu/tmp/cmake_targets/basic_simulator/enb" > $1
        echo "sync" >> $1
        echo "sudo tar -cjhf basic-simulator-enb-core-${TC}.bz2 core lte-softmodem *.so ci-lte-basic-sim.conf my-lte-softmodem-run.sh" >> $1
        echo "sudo rm core" >> $1
        echo "rm ci-lte-basic-sim.conf" >> $1
        echo "sync" >> $1
        ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/basic_simulator/enb/basic-simulator-enb-core-${TC}.bz2 $4
        rm -f $1
    fi
}

289 290 291 292 293 294 295 296 297 298 299 300 301
function terminate_ltebox_epc {
    echo "echo \"cd /opt/ltebox/tools\"" > $1
    echo "cd /opt/ltebox/tools" >> $1
    echo "echo \"sudo ./stop_ltebox\"" >> $1
    echo "sudo ./stop_ltebox" >> $1
    echo "echo \"sudo daemon --name=simulated_hss --stop\"" >> $1
    echo "sudo daemon --name=simulated_hss --stop" >> $1
    echo "echo \"sudo killall --signal SIGKILL hss_sim\"" >> $1
    echo "sudo killall --signal SIGKILL hss_sim" >> $1
    ssh -o StrictHostKeyChecking=no ubuntu@$2 < $1
    rm $1
}

302 303 304 305 306 307 308 309 310 311 312 313 314 315 316
if [ $# -lt 1 ] || [ $# -gt 9 ]
then
    echo "Syntax Error: not the correct number of arguments"
    echo ""
    usage
    exit 1
fi

VM_TEMPLATE=ci-
JOB_NAME=XX
BUILD_ID=XX
VM_NAME=ci-enb-usrp
ARCHIVES_LOC=enb_usrp/test
KEEP_VM_ALIVE=0
RUN_OPTIONS="none"
317
STATUS=0
318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353

while [[ $# -gt 0 ]]
do
key="$1"

case $key in
    -h|--help)
    shift
    usage
    exit 0
    ;;
    -jn|--job-name)
    JOB_NAME="$2"
    shift
    shift
    ;;
    -id|--build-id)
    BUILD_ID="$2"
    shift
    shift
    ;;
    -ws|--workspace)
    JENKINS_WKSP="$2"
    shift
    shift
    ;;
    -k|--keep-vm-alive)
    KEEP_VM_ALIVE=1
    shift
    ;;
    -v1)
    VM_NAME=ci-enb-usrp
    shift
    ;;
    -v2)
    VM_NAME=ci-basic-sim
354 355
    RUN_OPTIONS="complex"
    ARCHIVES_LOC=basic_sim/test
356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383
    shift
    ;;
    -v3)
    VM_NAME=ci-phy-sim
    RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
    ARCHIVES_LOC=phy_sim/test
    shift
    ;;
    -v4)
    VM_NAME=ci-cppcheck
    shift
    ;;
    -v7)
    VM_NAME=ci-enb-ethernet
    shift
    ;;
    -v8)
    VM_NAME=ci-ue-ethernet
    shift
    ;;
    --variant)
    variant="$2"
    case $variant in
        enb-usrp)
        VM_NAME=ci-enb-usrp
        ;;
        basic-sim)
        VM_NAME=ci-basic-sim
384 385
        RUN_OPTIONS="complex"
        ARCHIVES_LOC=basic_sim/test
386 387 388
        ;;
        phy-sim)
        VM_NAME=ci-phy-sim
Raphael Defosseux's avatar
Raphael Defosseux committed
389 390
        RUN_OPTIONS="./run_exec_autotests.bash -g \"01510*\" -q -np -b"
        ARCHIVES_LOC=phy_sim/test
391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445
        ;;
        cppcheck)
        VM_NAME=ci-cppcheck
        ;;
        enb-ethernet)
        VM_NAME=ci-enb-ethernet
        ;;
        ue-ethernet)
        VM_NAME=ci-ue-ethernet
        ;;
        *)
        echo ""
        echo "Syntax Error: Invalid Variant option -> $variant"
        echo ""
        variant_usage
        exit 1
    esac
    shift
    shift
    ;;
    *)
    echo "Syntax Error: unknown option: $key"
    echo ""
    usage
    exit 1
esac
done

if [ "$JOB_NAME" == "XX" ] || [ "$BUILD_ID" == "XX" ]
then
    VM_TEMPLATE=ci-
else
    VM_TEMPLATE=${JOB_NAME}-b${BUILD_ID}-
fi

VM_NAME=`echo $VM_NAME | sed -e "s#ci-#$VM_TEMPLATE#"`
VM_CMDS=${VM_NAME}_cmds.txt
ARCHIVES_LOC=${JENKINS_WKSP}/archives/${ARCHIVES_LOC}

echo "VM_NAME             = $VM_NAME"
echo "VM_CMD_FILE         = $VM_CMDS"
echo "JENKINS_WKSP        = $JENKINS_WKSP"
echo "ARCHIVES_LOC        = $ARCHIVES_LOC"

echo "############################################################"
echo "Waiting for VM to be started"
echo "############################################################"
uvt-kvm wait $VM_NAME --insecure

VM_IP_ADDR=`uvt-kvm ip $VM_NAME`
echo "$VM_NAME has for IP addr = $VM_IP_ADDR"

if [ "$RUN_OPTIONS" == "none" ]
then
    echo "No run on VM testing for this variant currently"
446 447
    exit $STATUS
fi
448

449 450
if [[ $RUN_OPTIONS =~ .*run_exec_autotests.* ]]
then
451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466
    echo "############################################################"
    echo "Running test script on VM ($VM_NAME)"
    echo "############################################################"
    echo "echo \"sudo apt-get --yes --quiet install bc \"" > $VM_CMDS
    echo "sudo apt-get update > bc-install.txt 2>&1" >> $VM_CMDS
    echo "sudo apt-get --yes install bc >> bc-install.txt 2>&1" >> $VM_CMDS
    echo "cd tmp" >> $VM_CMDS
    echo "echo \"source oaienv\"" >> $VM_CMDS
    echo "source oaienv" >> $VM_CMDS
    echo "echo \"cd cmake_targets/autotests\"" >> $VM_CMDS
    echo "cd cmake_targets/autotests" >> $VM_CMDS
    echo "echo \"rm -Rf log\"" >> $VM_CMDS
    echo "rm -Rf log" >> $VM_CMDS
    echo "$RUN_OPTIONS" | sed -e 's@"@\\"@g' -e 's@^@echo "@' -e 's@$@"@' >> $VM_CMDS
    echo "$RUN_OPTIONS" >> $VM_CMDS
    echo "cp /home/ubuntu/bc-install.txt log" >> $VM_CMDS
467 468
    echo "cd log" >> $VM_CMDS
    echo "zip -r -qq tmp.zip *.* 0*" >> $VM_CMDS
469 470 471 472 473 474 475 476 477 478 479

    ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < $VM_CMDS

    echo "############################################################"
    echo "Creating a tmp folder to store results and artifacts"
    echo "############################################################"

    if [ -d $ARCHIVES_LOC ]
    then
        rm -Rf $ARCHIVES_LOC
    fi
480 481 482 483 484 485 486 487 488 489
    mkdir --parents $ARCHIVES_LOC

    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/autotests/log/tmp.zip $ARCHIVES_LOC
    pushd $ARCHIVES_LOC
    unzip -qq -DD tmp.zip
    rm tmp.zip
    if [ -f results_autotests.xml ]
    then
        FUNCTION=`echo $VM_NAME | sed -e "s@$VM_TEMPLATE@@"`
        NEW_NAME=`echo "results_autotests.xml" | sed -e "s@results_autotests@results_autotests-$FUNCTION@"`
490 491 492 493 494 495
        echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > $NEW_NAME
        echo "<?xml-stylesheet type=\"text/xsl\" href=\"$FUNCTION.xsl\" ?>" >> $NEW_NAME
        cat results_autotests.xml >> $NEW_NAME
        sed -e "s@TEMPLATE@$FUNCTION@" $JENKINS_WKSP/ci-scripts/template.xsl > $FUNCTION.xsl
        #mv results_autotests.xml $NEW_NAME
        rm results_autotests.xml
496 497
    fi
    popd
498 499 500 501 502 503 504 505 506 507

    if [ $KEEP_VM_ALIVE -eq 0 ]
    then
        echo "############################################################"
        echo "Destroying VM"
        echo "############################################################"
        uvt-kvm destroy $VM_NAME
        ssh-keygen -R $VM_IP_ADDR
    fi
    rm -f $VM_CMDS
508 509

    echo "############################################################"
510
    echo "Checking run status"
511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544
    echo "############################################################"

    LOG_FILES=`ls $ARCHIVES_LOC/results_autotests*.xml`
    NB_FOUND_FILES=0
    NB_RUNS=0
    NB_FAILURES=0

    for FULLFILE in $LOG_FILES
    do
        TESTSUITES=`egrep "testsuite errors" $FULLFILE`
        for TESTSUITE in $TESTSUITES
        do
            if [[ "$TESTSUITE" == *"tests="* ]]
            then
                RUNS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
                NB_RUNS=$((NB_RUNS + RUNS))
            fi
            if [[ "$TESTSUITE" == *"failures="* ]]
            then
                FAILS=`echo $TESTSUITE | awk 'BEGIN{FS="="}{print $2}END{}' | sed -e "s@'@@g" `
                NB_FAILURES=$((NB_FAILURES + FAILS))
            fi
        done
        NB_FOUND_FILES=$((NB_FOUND_FILES + 1))
    done

    echo "NB_FOUND_FILES = $NB_FOUND_FILES"
    echo "NB_RUNS        = $NB_RUNS"
    echo "NB_FAILURES    = $NB_FAILURES"

    if [ $NB_FOUND_FILES -eq 0 ]; then STATUS=-1; fi
    if [ $NB_RUNS -eq 0 ]; then STATUS=-1; fi
    if [ $NB_FAILURES -ne 0 ]; then STATUS=-1; fi

545 546
fi

547 548
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-basic-sim.* ]]
then
549 550
    PING_STATUS=0
    IPERF_STATUS=0
551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589
    if [ -d $ARCHIVES_LOC ]
    then
        rm -Rf $ARCHIVES_LOC
    fi
    mkdir --parents $ARCHIVES_LOC

    EPC_VM_NAME=`echo $VM_NAME | sed -e "s#basic-sim#epc#"`
    LTEBOX=0
    if [ -d /opt/ltebox-archives/ ]
    then
        # Checking if all ltebox archives are available to run ltebx epc on a brand new VM
        if [ -f /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ] && [ -f /opt/ltebox-archives/etc-conf.zip ] && [ -f /opt/ltebox-archives/hss-sim.zip ]
        then
            echo "############################################################"
            echo "Test EPC on VM ($EPC_VM_NAME) will be using ltebox"
            echo "############################################################"
            LTEBOX=1
        fi
    fi
    # Here we could have other types of EPC detection

    # Do we need to start the EPC VM
    EPC_VM_CMDS=`echo $VM_CMDS | sed -e "s#cmds#epc-cmds#"`
    echo "EPC_VM_CMD_FILE     = $EPC_VM_CMDS"
    IS_EPC_VM_ALIVE=`uvt-kvm list | grep -c $EPC_VM_NAME`
    if [ $IS_EPC_VM_ALIVE -eq 0 ]
    then
        echo "############################################################"
        echo "Creating test EPC VM ($EPC_VM_NAME) on Ubuntu Cloud Image base"
        echo "############################################################"
        uvt-kvm create $EPC_VM_NAME release=xenial --unsafe-caching
    fi

    uvt-kvm wait $EPC_VM_NAME --insecure
    EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
    echo "$EPC_VM_NAME has for IP addr = $EPC_VM_IP_ADDR"
    scp -o StrictHostKeyChecking=no /etc/apt/apt.conf.d/01proxy ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu

    # ltebox specific actions (install and start)
590
    LTE_BOX_TO_INSTALL=1
Raphael Defosseux's avatar
Raphael Defosseux committed
591
    if [ $LTEBOX -eq 1 ]
592 593 594 595 596 597 598 599
    then
        echo "ls -ls /opt/ltebox/tools/start_ltebox" > $EPC_VM_CMDS
        RESPONSE=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
        NB_EXES=`echo $RESPONSE | grep -c ltebox`
        if [ $NB_EXES -eq 1 ]; then LTE_BOX_TO_INSTALL=0; fi
    fi

    if [ $LTEBOX -eq 1 ] && [ $LTE_BOX_TO_INSTALL -eq 1 ]
600 601 602 603 604 605 606 607 608
    then
        echo "############################################################"
        echo "Copying ltebox archives into EPC VM ($EPC_VM_NAME)" 
        echo "############################################################"
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/ltebox_2.2.70_16_04_amd64.deb ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/etc-conf.zip ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu
        scp -o StrictHostKeyChecking=no /opt/ltebox-archives/hss-sim.zip ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu

        echo "############################################################"
609
        echo "Install EPC on EPC VM ($EPC_VM_NAME)"
610 611 612 613 614 615 616
        echo "############################################################"
        echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $EPC_VM_CMDS
        echo "touch /home/ubuntu/.hushlogin" >> $EPC_VM_CMDS
        echo "echo \"sudo apt-get --yes --quiet install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf\"" >> $EPC_VM_CMDS
        echo "sudo apt-get update > zip-install.txt 2>&1" >> $EPC_VM_CMDS
        echo "sudo apt-get --yes install zip openjdk-8-jre libconfuse-dev libreadline-dev liblog4c-dev libgcrypt-dev libsctp-dev python2.7 python2.7-dev daemon iperf >> zip-install.txt 2>&1" >> $EPC_VM_CMDS

617
        # Installing HSS
618 619 620 621 622 623 624
        echo "echo \"cd /opt\"" >> $EPC_VM_CMDS
        echo "cd /opt" >> $EPC_VM_CMDS
        echo "echo \"sudo unzip -qq /home/ubuntu/hss-sim.zip\"" >> $EPC_VM_CMDS
        echo "sudo unzip -qq /home/ubuntu/hss-sim.zip" >> $EPC_VM_CMDS
        echo "echo \"cd /opt/hss_sim0609\"" >> $EPC_VM_CMDS
        echo "cd /opt/hss_sim0609" >> $EPC_VM_CMDS

625
        # Installing ltebox
626 627 628 629 630 631 632 633 634 635 636
        echo "echo \"cd /home/ubuntu\"" >> $EPC_VM_CMDS
        echo "cd /home/ubuntu" >> $EPC_VM_CMDS
        echo "echo \"sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb \"" >> $EPC_VM_CMDS
        echo "sudo dpkg -i ltebox_2.2.70_16_04_amd64.deb >> zip-install.txt 2>&1" >> $EPC_VM_CMDS

        echo "echo \"cd /opt/ltebox/etc/\"" >> $EPC_VM_CMDS
        echo "cd /opt/ltebox/etc/" >> $EPC_VM_CMDS
        echo "echo \"sudo unzip -qq -o /home/ubuntu/etc-conf.zip\"" >> $EPC_VM_CMDS
        echo "sudo unzip -qq -o /home/ubuntu/etc-conf.zip" >> $EPC_VM_CMDS
        echo "sudo sed -i  -e 's#EPC_VM_IP_ADDRESS#$EPC_VM_IP_ADDR#' gw.conf" >> $EPC_VM_CMDS
        echo "sudo sed -i  -e 's#EPC_VM_IP_ADDRESS#$EPC_VM_IP_ADDR#' mme.conf" >> $EPC_VM_CMDS
637 638 639 640 641 642 643 644 645 646 647 648
    fi

    # Starting EPC
    if [ $LTEBOX -eq 1 ]
    then
        echo "############################################################"
        echo "Start EPC on EPC VM ($EPC_VM_NAME)"
        echo "############################################################"
        echo "echo \"cd /opt/hss_sim0609\"" >> $EPC_VM_CMDS
        echo "cd /opt/hss_sim0609" >> $EPC_VM_CMDS
        echo "echo \"sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real\"" >> $EPC_VM_CMDS
        echo "sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real" >> $EPC_VM_CMDS
649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665

        echo "echo \"cd /opt/ltebox/tools/\"" >> $EPC_VM_CMDS
        echo "cd /opt/ltebox/tools/" >> $EPC_VM_CMDS
        echo "echo \"sudo ./start_ltebox\"" >> $EPC_VM_CMDS
        echo "nohup sudo ./start_ltebox > /home/ubuntu/ltebox.txt" >> $EPC_VM_CMDS

        ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS
        rm -f $EPC_VM_CMDS

        # We may have some adaptation to do
        if [ -f /opt/ltebox-archives/adapt_ue_sim.txt ]
        then
            echo "############################################################"
            echo "Doing some adaptation on UE side"
            echo "############################################################"
            ssh -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR < /opt/ltebox-archives/adapt_ue_sim.txt
        fi
666

667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685
        i="0"
        echo "ifconfig tun5 | egrep -c \"inet addr\"" > $EPC_VM_CMDS
        while [ $i -lt 10 ]
        do
            sleep 2
            CONNECTED=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
            if [ $CONNECTED -eq 1 ]
            then
                i="100"
            else
                i=$[$i+1]
            fi
        done
        rm $EPC_VM_CMDS
        if [ $i -lt 50 ]
        then
            echo "Problem w/ starting ltebox EPC"
            exit -1
        fi
686 687
    fi

688
    # HERE ADD ANY INSTALL ACTIONS FOR ANOTHER EPC
689 690 691 692 693 694 695 696 697 698 699 700

    # Retrieve EPC real IP address
    if [ $LTEBOX -eq 1 ]
    then
        # in our configuration file, we are using pool 5
        echo "ifconfig tun5 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's#  P-t-P:.*\$##'" > $EPC_VM_CMDS
        REAL_EPC_IP_ADDR=`ssh -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR < $EPC_VM_CMDS`
        echo "EPC IP Address     is : $REAL_EPC_IP_ADDR"
        rm $EPC_VM_CMDS
    fi

    echo "############################################################"
701
    echo "Starting the eNB in FDD-5MHz mode"
702
    echo "############################################################"
703 704
    CURRENT_ENB_LOG_FILE=fdd_05MHz_enb.log
    start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-fdd-basic-sim.conf
705

706
    echo "############################################################"
707
    echo "Starting the UE in FDD-5MHz mode"
708
    echo "############################################################"
709 710
    CURRENT_UE_LOG_FILE=fdd_05MHz_ue.log
    start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2680
711 712 713 714 715 716
    if [ $UE_SYNC -eq 0 ]
    then
        echo "Problem w/ eNB and UE not syncing"
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
717
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
718 719 720 721
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
        exit -1
    fi
    get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
722 723

    echo "############################################################"
724
    echo "Pinging the UE"
725
    echo "############################################################"
726 727 728 729
    PING_LOG_FILE=fdd_05MHz_ping_ue.txt
    ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
    check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
730

731 732 733
    echo "############################################################"
    echo "Iperf DL"
    echo "############################################################"
734
    CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_dl
735 736 737 738 739 740 741 742
    iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15

    echo "############################################################"
    echo "Iperf UL"
    echo "############################################################"
743
    CURR_IPERF_LOG_BASE=fdd_05MHz_iperf_ul
744 745 746 747 748 749 750 751 752 753 754
    iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2

    echo "############################################################"
    echo "Terminate enb/ue simulators"
    echo "############################################################"
    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
755
    recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
756 757

    echo "############################################################"
758
    echo "Starting the eNB in FDD-10MHz mode"
759
    echo "############################################################"
760 761
    CURRENT_ENB_LOG_FILE=fdd_10MHz_enb.log
    start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-fdd-basic-sim.conf
762 763

    echo "############################################################"
764
    echo "Starting the UE in FDD-10MHz mode"
765
    echo "############################################################"
766 767
    CURRENT_UE_LOG_FILE=fdd_10MHz_ue.log
    start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2680
768
    if [ $UE_SYNC -eq 0 ]
769 770
    then
        echo "Problem w/ eNB and UE not syncing"
771
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
772 773
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
774
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
775
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
776 777
        exit -1
    fi
778
    get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
779 780 781 782

    echo "############################################################"
    echo "Pinging the UE"
    echo "############################################################"
783 784 785 786
    PING_LOG_FILE=fdd_10MHz_ping_ue.txt
    ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
    check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
787 788 789 790

    echo "############################################################"
    echo "Iperf DL"
    echo "############################################################"
791
    CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_dl
792 793 794 795
    iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15
796

797 798 799
    echo "############################################################"
    echo "Iperf UL"
    echo "############################################################"
800
    CURR_IPERF_LOG_BASE=fdd_10MHz_iperf_ul
801 802 803 804
    iperf_ul $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 2 $CURR_IPERF_LOG_BASE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 2
805

806 807 808 809 810 811
    echo "############################################################"
    echo "Terminate enb/ue simulators"
    echo "############################################################"
    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
812
    recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
813 814

    echo "############################################################"
815
    echo "Starting the eNB in FDD-20MHz mode"
816
    echo "############################################################"
817 818
    CURRENT_ENB_LOG_FILE=fdd_20MHz_enb.log
    start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-fdd-basic-sim.conf
819

820
    echo "############################################################"
821
    echo "Starting the UE in FDD-20MHz mode"
822
    echo "############################################################"
823 824
    CURRENT_UE_LOG_FILE=fdd_20MHz_ue.log
    start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2680
825 826 827 828 829 830
    if [ $UE_SYNC -eq 0 ]
    then
        echo "Problem w/ eNB and UE not syncing"
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
831
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
832 833 834 835
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
        exit -1
    fi
    get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
836

837 838 839
    echo "############################################################"
    echo "Pinging the UE"
    echo "############################################################"
840 841 842 843
    PING_LOG_FILE=fdd_20MHz_ping_ue.txt
    ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
    check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
844 845 846 847

    echo "############################################################"
    echo "Iperf DL"
    echo "############################################################"
848
    CURR_IPERF_LOG_BASE=fdd_20MHz_iperf_dl
849 850 851 852 853 854
    iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 15 $CURR_IPERF_LOG_BASE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 15

    echo "############################################################"
855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884
    echo "Terminate enb/ue simulators"
    echo "############################################################"
    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
    recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC

    echo "############################################################"
    echo "Starting the eNB in TDD-5MHz mode"
    echo "############################################################"
    CURRENT_ENB_LOG_FILE=tdd_05MHz_enb.log
    start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 25 lte-tdd-basic-sim.conf

    echo "############################################################"
    echo "Starting the UE in TDD-5MHz mode"
    echo "############################################################"
    CURRENT_UE_LOG_FILE=tdd_05MHz_ue.log
    start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 25 2350
    if [ $UE_SYNC -eq 0 ]
    then
        echo "Problem w/ eNB and UE not syncing"
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
        exit -1
    fi
    get_ue_ip_addr $VM_CMDS $VM_IP_ADDR

885
    echo "############################################################"
886 887 888 889 890 891 892
    echo "Pinging the UE"
    echo "############################################################"
    PING_LOG_FILE=tdd_05MHz_ping_ue.txt
    ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
    check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20

893 894 895 896 897 898 899 900 901
# Bug in TDD 5Mhz --- not running it
#    echo "############################################################"
#    echo "Iperf DL"
#    echo "############################################################"
#    CURR_IPERF_LOG_BASE=tdd_05MHz_iperf_dl
#    iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
#    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
#    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
#    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
Raphael Defosseux's avatar
Raphael Defosseux committed
902

903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958
    echo "############################################################"
    echo "Terminate enb/ue simulators"
    echo "############################################################"
    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
    recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC

    echo "############################################################"
    echo "Starting the eNB in TDD-10MHz mode"
    echo "############################################################"
    CURRENT_ENB_LOG_FILE=tdd_10MHz_enb.log
    start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 50 lte-tdd-basic-sim.conf

    echo "############################################################"
    echo "Starting the UE in TDD-10MHz mode"
    echo "############################################################"
    CURRENT_UE_LOG_FILE=tdd_10MHz_ue.log
    start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 50 2350
    if [ $UE_SYNC -eq 0 ]
    then
        echo "Problem w/ eNB and UE not syncing"
        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
        exit -1
    fi
    get_ue_ip_addr $VM_CMDS $VM_IP_ADDR

    echo "############################################################"
    echo "Pinging the UE"
    echo "############################################################"
    PING_LOG_FILE=tdd_10MHz_ping_ue.txt
    ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
    check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20

    echo "############################################################"
    echo "Iperf DL"
    echo "############################################################"
    CURR_IPERF_LOG_BASE=tdd_10MHz_iperf_dl
    iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6

    echo "############################################################"
    echo "Terminate enb/ue simulators"
    echo "############################################################"
    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
    recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC

959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007
# Disabling TDD-20MHz test since it is very unstable
#
#    echo "############################################################"
#    echo "Starting the eNB in TDD-20MHz mode"
#    echo "############################################################"
#    CURRENT_ENB_LOG_FILE=tdd_20MHz_enb.log
#    start_basic_sim_enb $VM_CMDS $VM_IP_ADDR $EPC_VM_IP_ADDR $CURRENT_ENB_LOG_FILE 100 lte-tdd-basic-sim.conf
#
#    echo "############################################################"
#    echo "Starting the UE in TDD-20MHz mode"
#    echo "############################################################"
#    CURRENT_UE_LOG_FILE=tdd_20MHz_ue.log
#    start_basic_sim_ue $VM_CMDS $VM_IP_ADDR $CURRENT_UE_LOG_FILE 100 2350
#    if [ $UE_SYNC -eq 0 ]
#    then
#        echo "Problem w/ eNB and UE not syncing"
#        terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
#        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
#        scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
#        recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
#        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
#        exit -1
#    fi
#    get_ue_ip_addr $VM_CMDS $VM_IP_ADDR
#
#    echo "############################################################"
#    echo "Pinging the UE"
#    echo "############################################################"
#    PING_LOG_FILE=tdd_20MHz_ping_ue.txt
#    ping_ue_ip_addr $EPC_VM_CMDS $EPC_VM_IP_ADDR $UE_IP_ADDR $PING_LOG_FILE
#    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/$PING_LOG_FILE $ARCHIVES_LOC
#    check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
#
#    echo "############################################################"
#    echo "Iperf DL"
#    echo "############################################################"
#    CURR_IPERF_LOG_BASE=tdd_20MHz_iperf_dl
#    iperf_dl $VM_CMDS $VM_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR 6 $CURR_IPERF_LOG_BASE
#    scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${CURR_IPERF_LOG_BASE}_client.txt $ARCHIVES_LOC
#    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/${CURR_IPERF_LOG_BASE}_server.txt $ARCHIVES_LOC
#    check_iperf $ARCHIVES_LOC/$CURR_IPERF_LOG_BASE 6
#
#    echo "############################################################"
#    echo "Terminate enb/ue simulators"
#    echo "############################################################"
#    terminate_enb_ue_basic_sim $VM_CMDS $VM_IP_ADDR
#    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
#    scp -o StrictHostKeyChecking=no ubuntu@$VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
#    recover_core_dump $VM_CMDS $VM_IP_ADDR $ARCHIVES_LOC/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
1008

1009 1010 1011 1012 1013 1014 1015 1016 1017
    echo "############################################################"
    echo "Terminate EPC"
    echo "############################################################"

    if [ $LTEBOX -eq 1 ]
    then
        terminate_ltebox_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
    fi

1018 1019 1020 1021
    echo "############################################################"
    echo "Checking run status"
    echo "############################################################"

1022 1023
    if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
    if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
1024 1025 1026 1027 1028 1029 1030 1031

fi

if [ $STATUS -eq 0 ]
then
    echo "STATUS seems OK"
else
    echo "STATUS failed?"
1032 1033
fi

1034
exit $STATUS