main.py 99.7 KB
Newer Older
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
#---------------------------------------------------------------------
# Python for CI of OAI-eNB + COTS-UE
#
#   Required Python Version
#     Python 3.x
#
#   Required Python Package
#     pexpect
#---------------------------------------------------------------------

#-----------------------------------------------------------
# Version
#-----------------------------------------------------------
Version = '0.1'

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
#-----------------------------------------------------------
# Constants
#-----------------------------------------------------------
ALL_PROCESSES_OK = 0
ENB_PROCESS_FAILED = -1
ENB_PROCESS_OK = +1
ENB_PROCESS_SEG_FAULT = -11
ENB_PROCESS_ASSERTION = -12
ENB_PROCESS_REALTIME_ISSUE = -13
HSS_PROCESS_FAILED = -2
HSS_PROCESS_OK = +2
MME_PROCESS_FAILED = -3
MME_PROCESS_OK = +3
SPGW_PROCESS_FAILED = -4
SPGW_PROCESS_OK = +4
UE_IP_ADDRESS_ISSUE = -5

53 54 55 56 57 58 59 60 61 62 63 64
#-----------------------------------------------------------
# Import
#-----------------------------------------------------------
import sys		# arg
import re		# reg
import pexpect		# pexpect
import time		# sleep
import os
import xml.etree.ElementTree as ET
import logging
import datetime
import signal
Raphael Defosseux's avatar
Raphael Defosseux committed
65
from multiprocessing import Process, Lock, SimpleQueue
66
logging.basicConfig(
67 68
	level=logging.DEBUG,
	format="[%(asctime)s] %(name)s:%(levelname)s: %(message)s"
69 70 71 72 73 74 75 76 77 78
)

#-----------------------------------------------------------
# Class Declaration
#-----------------------------------------------------------
class SSHConnection():
	def __init__(self):
		self.eNBIPAddress = ''
		self.eNBRepository = ''
		self.eNBBranch = ''
Raphael Defosseux's avatar
Raphael Defosseux committed
79
		self.eNB_AllowMerge = False
80
		self.eNBCommitID = ''
81
		self.eNBTargetBranch = ''
82 83 84 85 86 87 88 89 90 91 92 93
		self.eNBUserName = ''
		self.eNBPassword = ''
		self.eNBSourceCodePath = ''
		self.EPCIPAddress = ''
		self.EPCUserName = ''
		self.EPCPassword = ''
		self.EPCSourceCodePath = ''
		self.EPCType = ''
		self.ADBIPAddress = ''
		self.ADBUserName = ''
		self.ADBPassword = ''
		self.testCase_id = ''
94
		self.testXMLfile = ''
95 96 97
		self.desc = ''
		self.Build_eNB_args = ''
		self.Initialize_eNB_args = ''
98
		self.eNBLogFile = ''
99
		self.eNB_instance = ''
100 101 102 103
		self.ping_args = ''
		self.ping_packetloss_threshold = ''
		self.iperf_args = ''
		self.iperf_packetloss_threshold = ''
104
		self.iperf_profile = ''
105
		self.UEDevices = []
106
		self.CatMDevices = []
107
		self.UEIPAddresses = []
Raphael Defosseux's avatar
Raphael Defosseux committed
108 109 110 111
		self.htmlFile = ''
		self.htmlHeaderCreated = False
		self.htmlFooterCreated = False
		self.htmlUEConnected = 0
112
		self.htmleNBFailureMsg = ''
113
		self.picocom_closure = False
114

115
	def open(self, ipaddress, username, password):
116 117 118 119 120
		count = 0
		connect_status = False
		while count < 4:
			self.ssh = pexpect.spawn('ssh', [username + '@' + ipaddress], timeout = 5)
			self.sshresponse = self.ssh.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', 'Last login', pexpect.EOF, pexpect.TIMEOUT])
121
			if self.sshresponse == 0:
122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147
				self.ssh.sendline('yes')
				self.ssh.expect('password:')
				self.ssh.sendline(password)
				self.sshresponse = self.ssh.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if self.sshresponse == 0:
					count = 10
					connect_status = True
				else:
					logging.debug('self.sshresponse = ' + str(self.sshresponse))
			elif self.sshresponse == 1:
				self.ssh.sendline(password)
				self.sshresponse = self.ssh.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if self.sshresponse == 0:
					count = 10
					connect_status = True
				else:
					logging.debug('self.sshresponse = ' + str(self.sshresponse))
			elif self.sshresponse == 2:
				# Checking if we are really on the remote client defined by its IP address
				self.command('stdbuf -o0 ifconfig | egrep --color=never "inet addr:"', '\$', 5)
				result = re.search(str(ipaddress), str(self.ssh.before))
				if result is None:
					self.close()
				else:
					count = 10
					connect_status = True
148
			else:
149 150
				# debug output
				logging.debug(str(self.ssh.before))
151
				logging.debug('self.sshresponse = ' + str(self.sshresponse))
Raphael Defosseux's avatar
Raphael Defosseux committed
152 153 154
			# adding a tempo when failure
			if not connect_status:
				time.sleep(1)
155 156
			count += 1
		if connect_status:
157 158
			pass
		else:
159
			sys.exit('SSH Connection Failed')
160

161 162 163 164 165 166
	def command(self, commandline, expectedline, timeout):
		logging.debug(commandline)
		self.ssh.timeout = timeout
		self.ssh.sendline(commandline)
		self.sshresponse = self.ssh.expect([expectedline, pexpect.EOF, pexpect.TIMEOUT])
		if self.sshresponse == 0:
Raphael Defosseux's avatar
Raphael Defosseux committed
167
			return 0
168 169 170 171 172 173 174
		elif self.sshresponse == 1:
			logging.debug('\u001B[1;37;41m Unexpected EOF \u001B[0m')
			logging.debug('Expected Line : ' + expectedline)
			sys.exit(self.sshresponse)
		elif self.sshresponse == 2:
			logging.debug('\u001B[1;37;41m Unexpected TIMEOUT \u001B[0m')
			logging.debug('Expected Line : ' + expectedline)
175
			result = re.search('ping |iperf |picocom', str(commandline))
Raphael Defosseux's avatar
Raphael Defosseux committed
176
			if result is None:
177
				logging.debug(str(self.ssh.before))
Raphael Defosseux's avatar
Raphael Defosseux committed
178 179 180
				sys.exit(self.sshresponse)
			else:
				return -1
181 182 183 184
		else:
			logging.debug('\u001B[1;37;41m Unexpected Others \u001B[0m')
			logging.debug('Expected Line : ' + expectedline)
			sys.exit(self.sshresponse)
185

186 187 188 189 190 191 192
	def close(self):
		self.ssh.timeout = 5
		self.ssh.sendline('exit')
		self.sshresponse = self.ssh.expect([pexpect.EOF, pexpect.TIMEOUT])
		if self.sshresponse == 0:
			pass
		elif self.sshresponse == 1:
193 194
			if not self.picocom_closure:
				logging.debug('\u001B[1;37;41m Unexpected TIMEOUT during closing\u001B[0m')
195
		else:
196
			logging.debug('\u001B[1;37;41m Unexpected Others during closing\u001B[0m')
197

198
	def copyin(self, ipaddress, username, password, source, destination):
Raphael Defosseux's avatar
Raphael Defosseux committed
199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225
		logging.debug('scp '+ username + '@' + ipaddress + ':' + source + ' ' + destination)
		scp_spawn = pexpect.spawn('scp '+ username + '@' + ipaddress + ':' + source + ' ' + destination, timeout = 5)
		scp_response = scp_spawn.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', pexpect.EOF, pexpect.TIMEOUT])
		if scp_response == 0:
			scp_spawn.sendline('yes')
			scp_spawn.expect('password:')
			scp_spawn.sendline(password)
			scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
			if scp_response == 0:
				pass
			else:
				logging.debug('1 - scp_response = ' + str(scp_response))
				sys.exit('SCP failed')
		elif scp_response == 1:
			scp_spawn.sendline(password)
			scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
			if scp_response == 0 or scp_response == 3:
				pass
			else:
				logging.debug('2 - scp_response = ' + str(scp_response))
				sys.exit('SCP failed')
		elif scp_response == 2:
			pass
		else:
			logging.debug('3 - scp_response = ' + str(scp_response))
			sys.exit('SCP failed')

226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253
	def copyout(self, ipaddress, username, password, source, destination):
		logging.debug('scp ' + source + ' ' + username + '@' + ipaddress + ':' + destination)
		scp_spawn = pexpect.spawn('scp ' + source + ' ' + username + '@' + ipaddress + ':' + destination, timeout = 5)
		scp_response = scp_spawn.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', pexpect.EOF, pexpect.TIMEOUT])
		if scp_response == 0:
			scp_spawn.sendline('yes')
			scp_spawn.expect('password:')
			scp_spawn.sendline(password)
			scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
			if scp_response == 0:
				pass
			else:
				logging.debug('1 - scp_response = ' + str(scp_response))
				sys.exit('SCP failed')
		elif scp_response == 1:
			scp_spawn.sendline(password)
			scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
			if scp_response == 0 or scp_response == 3:
				pass
			else:
				logging.debug('2 - scp_response = ' + str(scp_response))
				sys.exit('SCP failed')
		elif scp_response == 2:
			pass
		else:
			logging.debug('3 - scp_response = ' + str(scp_response))
			sys.exit('SCP failed')

254 255 256 257 258 259 260
	def BuildeNB(self):
		if self.eNBIPAddress == '' or self.eNBRepository == '' or self.eNBBranch == '' or self.eNBUserName == '' or self.eNBPassword == '' or self.eNBSourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
		self.command('mkdir -p ' + self.eNBSourceCodePath, '\$', 5)
		self.command('cd ' + self.eNBSourceCodePath, '\$', 5)
261 262
		self.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + self.eNBRepository + ' .; else stdbuf -o0 git fetch; fi', '\$', 600)
		# Raphael: here add a check if git clone or git fetch went smoothly
263 264
		self.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
		self.command('git config user.name "OAI Jenkins"', '\$', 5)
265
		self.command('echo ' + self.eNBPassword + ' | sudo -S git clean -x -d -ff', '\$', 30)
266 267 268 269 270
		# if the commit ID is provided use it to point to it
		if self.eNBCommitID != '':
			self.command('git checkout -f ' + self.eNBCommitID, '\$', 5)
		# if the branch is not develop, then it is a merge request and we need to do 
		# the potential merge. Note that merge conflicts should already been checked earlier
Raphael Defosseux's avatar
Raphael Defosseux committed
271
		if (self.eNB_AllowMerge):
272 273 274 275 276 277
			if self.eNBTargetBranch == '':
				if (self.eNBBranch != 'develop') and (self.eNBBranch != 'origin/develop'):
					self.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
			else:
				logging.debug('Merging with the target branch: ' + self.eNBTargetBranch)
				self.command('git merge --ff origin/' + self.eNBTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
278 279
		self.command('source oaienv', '\$', 5)
		self.command('cd cmake_targets', '\$', 5)
280 281
		self.command('mkdir -p log', '\$', 5)
		self.command('chmod 777 log', '\$', 5)
282
		# no need to remove in log (git clean did the trick)
283
		self.command('stdbuf -o0 ./build_oai ' + self.Build_eNB_args + ' 2>&1 | stdbuf -o0 tee -a compile_oai_enb.log', 'Bypassing the Tests', 600)
284
		self.command('mkdir -p build_log_' + SSH.testCase_id, '\$', 5)
285 286 287 288
		self.command('mv log/* ' + 'build_log_' + SSH.testCase_id, '\$', 5)
		self.command('mv compile_oai_enb.log ' + 'build_log_' + SSH.testCase_id, '\$', 5)
		# Workaround to run with develop-nr
		self.command('if [ -e ran_build ]; then cp -rf ran_build lte_build_oai; fi', '\$', 30)
289
		self.close()
290
		self.CreateHtmlTestRow(self.Build_eNB_args, 'OK', ALL_PROCESSES_OK)
291

292 293 294 295 296 297 298
	def InitializeHSS(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		if re.match('OAI', self.EPCType, re.IGNORECASE):
			logging.debug('Using the OAI EPC HSS')
299
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
300 301
			self.command('source oaienv', '\$', 5)
			self.command('cd scripts', '\$', 5)
302
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_hss 2>&1 | stdbuf -o0 awk \'{ print strftime("[%Y/%m/%d %H:%M:%S] ",systime()) $0 }\' | stdbuf -o0 tee -a hss_' + SSH.testCase_id + '.log &', 'Core state: 2 -> 3', 35)
303 304
		else:
			logging.debug('Using the ltebox simulated HSS')
305 306 307 308
			self.command('if [ -d ' + self.EPCSourceCodePath + '/scripts ]; then echo ' + self.eNBPassword + ' | sudo -S rm -Rf ' + self.EPCSourceCodePath + '/scripts ; fi', '\$', 5)
			self.command('mkdir -p ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
			self.command('cd /opt/hss_sim0609', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss.log daemon.log', '\$', 5)
309 310
			self.command('echo ' + self.EPCPassword + ' | sudo -S echo "Starting sudo session" && sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real  ', '\$', 5)
		self.close()
311
		self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)
312

313 314 315 316 317 318
	def InitializeMME(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		if re.match('OAI', self.EPCType, re.IGNORECASE):
319
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
320 321
			self.command('source oaienv', '\$', 5)
			self.command('cd scripts', '\$', 5)
322
			self.command('stdbuf -o0 hostname', '\$', 5)
323 324 325 326 327 328 329
			result = re.search('hostname\\\\r\\\\n(?P<host_name>[a-zA-Z0-9\-\_]+)\\\\r\\\\n', str(self.ssh.before))
			if result is None:
				logging.debug('\u001B[1;37;41m Hostname Not Found! \u001B[0m')
				sys.exit(1)
			host_name = result.group('host_name')
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_mme 2>&1 | stdbuf -o0 tee -a mme_' + SSH.testCase_id + '.log &', 'MME app initialization complete', 100)
		else:
330
			self.command('cd /opt/ltebox/tools', '\$', 5)
331 332
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./start_mme', '\$', 5)
		self.close()
333
		self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)
334 335 336

	def InitializeSPGW(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
337 338
			Usage()
			sys.exit('Insufficient Parameter')
339 340
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		if re.match('OAI', self.EPCType, re.IGNORECASE):
341
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
342 343 344 345
			self.command('source oaienv', '\$', 5)
			self.command('cd scripts', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_spgw 2>&1 | stdbuf -o0 tee -a spgw_' + SSH.testCase_id + '.log &', 'Initializing SPGW-APP task interface: DONE', 30)
		else:
346
			self.command('cd /opt/ltebox/tools', '\$', 5)
347 348
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./start_xGw', '\$', 5)
		self.close()
349
		self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)
350 351 352

	def InitializeeNB(self):
		if self.eNBIPAddress == '' or self.eNBUserName == '' or self.eNBPassword == '' or self.eNBSourceCodePath == '':
353 354 355
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = True
Raphael Defosseux's avatar
Raphael Defosseux committed
356 357 358
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.Initialize_eNB_args, 'KO', pStatus)
359
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
360
			sys.exit(1)
361 362
		self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
		self.command('cd ' + self.eNBSourceCodePath, '\$', 5)
363 364
		# Initialize_eNB_args usually start with -O and followed by the location in repository
		full_config_file = self.Initialize_eNB_args.replace('-O ','')
365 366 367 368 369 370 371
		extIdx = full_config_file.find('.conf')
		if (extIdx > 0):
			extra_options = full_config_file[extIdx + 5:]
			full_config_file = full_config_file[:extIdx + 5]
			config_path, config_file = os.path.split(full_config_file)
		else:
			sys.exit('Insufficient Parameter')
372
		ci_full_config_file = config_path + '/ci-' + config_file
373 374 375 376
		rruCheck = False
		result = re.search('rru', str(config_file))
		if result is not None:
			rruCheck = True
377 378
		# Make a copy and adapt to EPC / eNB IP addresses
		self.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
379 380
		self.command('sed -i -e \'s/CI_MME_IP_ADDR/' + self.EPCIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
		self.command('sed -i -e \'s/CI_ENB_IP_ADDR/' + self.eNBIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
381
		# Launch eNB with the modified config file
382 383
		self.command('source oaienv', '\$', 5)
		self.command('cd cmake_targets', '\$', 5)
384 385
		self.command('echo "ulimit -c unlimited && ./lte_build_oai/build/lte-softmodem -O ' + self.eNBSourceCodePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh ', '\$', 5)
		self.command('chmod 775 ./my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh ', '\$', 5)
Raphael Defosseux's avatar
Raphael Defosseux committed
386
		self.command('echo ' + self.eNBPassword + ' | sudo -S rm -Rf enb_' + SSH.testCase_id + '.log', '\$', 5)
387 388 389
		self.command('echo ' + self.eNBPassword + ' | sudo -S -E daemon --inherit --unsafe --name=enb' + str(SSH.eNB_instance) + '_daemon --chdir=' + self.eNBSourceCodePath + '/cmake_targets -o ' + self.eNBSourceCodePath + '/cmake_targets/enb_' + SSH.testCase_id + '.log ./my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh', '\$', 5)
		if not rruCheck:
			self.eNBLogFile = 'enb_' + SSH.testCase_id + '.log'
390 391 392 393 394 395 396
		time.sleep(6)
		doLoop = True
		loopCounter = 10
		while (doLoop):
			loopCounter = loopCounter - 1
			if (loopCounter == 0):
				doLoop = False
397
				logging.error('\u001B[1;37;41m eNB logging system did not show got sync! \u001B[0m')
398
				self.CreateHtmlTestRow('-O ' + config_file + extra_options, 'KO', ALL_PROCESSES_OK)
399
				self.CreateHtmlFooter(False)
400 401
				self.close()
				sys.exit(1)
402
			else:
403 404 405 406 407
				self.command('stdbuf -o0 cat enb_' + SSH.testCase_id + '.log | egrep --color=never -i "wait|sync"', '\$', 4)
				if rruCheck:
					result = re.search('wait RUs', str(self.ssh.before))
				else:
					result = re.search('got sync', str(self.ssh.before))
Raphael Defosseux's avatar
Raphael Defosseux committed
408 409 410 411
				if result is None:
					time.sleep(6)
				else:
					doLoop = False
412
					self.CreateHtmlTestRow('-O ' + config_file + extra_options, 'OK', ALL_PROCESSES_OK)
Raphael Defosseux's avatar
Raphael Defosseux committed
413
					logging.debug('\u001B[1m Initialize eNB Completed\u001B[0m')
414

415 416
		self.close()

417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444
	def InitializeUE_common(self, device_id):
		logging.debug('send adb commands')
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			# The following commands are deprecated since we no longer work on Android 7+
			# self.command('stdbuf -o0 adb -s ' + device_id + ' shell settings put global airplane_mode_on 1', '\$', 10)
			# self.command('stdbuf -o0 adb -s ' + device_id + ' shell am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true', '\$', 60)
			# a dedicated script has to be installed inside the UE
			# airplane mode on means call /data/local/tmp/off
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
			#airplane mode off means call /data/local/tmp/on
			logging.debug('\u001B[1mUE (' + device_id + ') Initialize Completed\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def InitializeUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = SSH.InitializeUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
445
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
446

447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549
	def checkDevTTYisUnlocked(self):
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		count = 0
		while count < 5:
			self.command('echo ' + self.ADBPassword + ' | sudo -S lsof | grep ttyUSB0', '\$', 10)
			result = re.search('picocom', str(self.ssh.before))
			if result is None:
				count = 10
			else:
				time.sleep(5)
				count = count + 1
		self.close()

	def InitializeCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Disabling the Radio
		self.command('AT+CFUN=0', 'OK', 5)
		logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
		# Checking if auto-attach is enabled
		self.command('AT^AUTOATT?', 'OK', 5)
		result = re.search('AUTOATT: (?P<state>[0-9\-]+)', str(self.ssh.before))
		if result is not None:
			if result.group('state') is not None:
				autoAttachState = int(result.group('state'))
				if autoAttachState is not None:
					if autoAttachState == 0:
						self.command('AT^AUTOATT=1', 'OK', 5)
					logging.debug('\u001B[1m Auto-Attach enabled\u001B[0m')
		else:
			logging.debug('\u001B[1;37;41m Could not check Auto-Attach! \u001B[0m')
		# Force closure of picocom but device might still be locked
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def TerminateCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Disabling the Radio
		self.command('AT+CFUN=0', 'OK', 5)
		logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def AttachCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Enabling the Radio
		self.command('AT+CFUN=1', 'SIMSTORE,READY', 5)
		logging.debug('\u001B[1m Cellular Functionality enabled\u001B[0m')
		time.sleep(4)
		# We should check if we register
		count = 0
		while count < 3:
			self.command('AT+CEREG?', 'OK', 5)
			result = re.search('CEREG: 2,(?P<state>[0-9\-]+)', str(self.ssh.before))
			if result is not None:
				mDataConnectionState = int(result.group('state'))
				if mDataConnectionState is not None:
					logging.debug('+CEREG: 2,' + str(mDataConnectionState))
			else:
				logging.debug(str(self.ssh.before))
			count = count + 1
			time.sleep(1)
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

Raphael Defosseux's avatar
Raphael Defosseux committed
550
	def AttachUE_common(self, device_id, statusQueue, lock):
551 552 553 554
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
			time.sleep(2)
Raphael Defosseux's avatar
Raphael Defosseux committed
555 556
			max_count = 45
			count = max_count
557 558 559 560 561
			while count > 0:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
				if result is None:
					logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
562 563 564 565 566 567
					lock.acquire()
					statusQueue.put(-1)
					statusQueue.put(device_id)
					statusQueue.put('mDataConnectionState Not Found!')
					lock.release()
					break
568 569 570
				mDataConnectionState = int(result.group('state'))
				if mDataConnectionState == 2:
					logging.debug('\u001B[1mUE (' + device_id + ') Attach Completed\u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
571 572 573 574 575
					lock.acquire()
					statusQueue.put(max_count - count)
					statusQueue.put(device_id)
					statusQueue.put('Attach Completed')
					lock.release()
576 577 578
					break
				count = count - 1
				if count == 15 or count == 30:
Raphael Defosseux's avatar
Raphael Defosseux committed
579
					logging.debug('\u001B[1;30;43m Retry UE (' + device_id + ') Flight Mode Off \u001B[0m')
580 581 582 583
					self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
					time.sleep(0.5)
					self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
					time.sleep(0.5)
Raphael Defosseux's avatar
Raphael Defosseux committed
584
				logging.debug('\u001B[1mWait UE (' + device_id + ') a second until mDataConnectionState=2 (' + str(max_count-count) + ' times)\u001B[0m')
585 586 587
				time.sleep(1)
			if count == 0:
				logging.debug('\u001B[1;37;41m UE (' + device_id + ') Attach Failed \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
588 589 590 591 592
				lock.acquire()
				statusQueue.put(-1)
				statusQueue.put(device_id)
				statusQueue.put('Attach Failed')
				lock.release()
593 594 595 596 597 598 599 600 601
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def AttachUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
Raphael Defosseux's avatar
Raphael Defosseux committed
602 603 604
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
605
			self.AutoTerminateUEandeNB()
606
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
607
			sys.exit(1)
608
		multi_jobs = []
Raphael Defosseux's avatar
Raphael Defosseux committed
609 610
		status_queue = SimpleQueue()
		lock = Lock()
611
		for device_id in self.UEDevices:
Raphael Defosseux's avatar
Raphael Defosseux committed
612
			p = Process(target = SSH.AttachUE_common, args = (device_id, status_queue, lock,))
613 614 615 616 617
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
Raphael Defosseux's avatar
Raphael Defosseux committed
618 619

		if (status_queue.empty()):
620
			self.CreateHtmlTestRow('N/A', 'KO', ALL_PROCESSES_OK)
621
			self.CreateHtmlFooter(False)
622
			self.AutoTerminateUEandeNB()
Raphael Defosseux's avatar
Raphael Defosseux committed
623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641
			sys.exit(1)
		else:
			attach_status = True
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					attach_status = False
				device_id = status_queue.get()
				message = status_queue.get()
				if (count < 0):
					html_cell = "<pre>UE (" + device_id + ")\n" + message + "</pre>"
				else:
					html_cell = "<pre>UE (" + device_id + ")\n" + message + ' in ' + str(count + 2) + ' seconds</pre>'
				html_queue.put(html_cell)
			if (attach_status):
				self.CreateHtmlTestRowQueue('N/A', 'OK', len(self.UEDevices), html_queue)
			else:
				self.CreateHtmlTestRowQueue('N/A', 'KO', len(self.UEDevices), html_queue)
642
				self.AutoTerminateUEandeNB()
643
				self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
644
				sys.exit(1)
645 646 647 648

	def DetachUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
649
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
650 651 652 653 654 655 656 657 658 659
			logging.debug('\u001B[1mUE (' + device_id + ') Detach Completed\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def DetachUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
Raphael Defosseux's avatar
Raphael Defosseux committed
660 661 662
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
663
			self.AutoTerminateUEandeNB()
664
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
665
			sys.exit(1)
666 667 668 669 670 671 672 673
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = SSH.DetachUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
674
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719

	def RebootUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			previousmDataConnectionStates = []
			# Save mDataConnectionState
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
			result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
			if result is None:
				logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
				sys.exit(1)
			previousmDataConnectionStates.append(int(result.group('state')))
			# Reboot UE
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell reboot', '\$', 10)
			time.sleep(60)
			previousmDataConnectionState = previousmDataConnectionStates.pop(0)
			count = 180
			while count > 0:
				count = count - 1
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
				if result is None:
					mDataConnectionState = None
				else:
					mDataConnectionState = int(result.group('state'))
					logging.debug('mDataConnectionState = ' + result.group('state'))
				if mDataConnectionState is None or (previousmDataConnectionState == 2 and mDataConnectionState != 2):
					logging.debug('\u001B[1mWait UE (' + device_id + ') a second until reboot completion (' + str(180-count) + ' times)\u001B[0m')
					time.sleep(1)
				else:
					logging.debug('\u001B[1mUE (' + device_id + ') Reboot Completed\u001B[0m')
					break
			if count == 0:
				logging.debug('\u001B[1;37;41m UE (' + device_id + ') Reboot Failed \u001B[0m')
				sys.exit(1)
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def RebootUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
Raphael Defosseux's avatar
Raphael Defosseux committed
720 721 722
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
723
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
724
			sys.exit(1)
725 726 727 728 729 730 731 732
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = SSH.RebootUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
733
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
734 735 736 737 738 739 740 741 742 743 744 745

	def GetAllUEDevices(self, terminate_ue_flag):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('adb devices', '\$', 15)
		self.UEDevices = re.findall("\\\\r\\\\n([A-Za-z0-9]+)\\\\tdevice",str(self.ssh.before))
		if terminate_ue_flag == False:
			if len(self.UEDevices) == 0:
				logging.debug('\u001B[1;37;41m UE Not Found! \u001B[0m')
				sys.exit(1)
746 747
		self.close()

748 749 750 751 752 753 754 755 756 757 758 759 760
	def GetAllCatMDevices(self, terminate_ue_flag):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('lsusb | egrep "Future Technology Devices International, Ltd FT2232C" | sed -e "s#:.*##" -e "s# #_#g"', '\$', 15)
		self.CatMDevices = re.findall("\\\\r\\\\n([A-Za-z0-9_]+)",str(self.ssh.before))
		if terminate_ue_flag == False:
			if len(self.CatMDevices) == 0:
				logging.debug('\u001B[1;37;41m CAT-M UE Not Found! \u001B[0m')
				sys.exit(1)
		self.close()

761 762 763 764
	def GetAllUEIPAddresses(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
765
		ue_ip_status = 0
766 767 768
		self.UEIPAddresses = []
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		for device_id in self.UEDevices:
769 770 771 772 773 774
			count = 0
			while count < 4:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell ip addr show | grep rmnet', '\$', 15)
				result = re.search('inet (?P<ueipaddress>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\/[0-9]+[0-9a-zA-Z\.\s]+', str(self.ssh.before))
				if result is None:
					logging.debug('\u001B[1;37;41m UE IP Address Not Found! \u001B[0m')
775
					time.sleep(1)
776 777 778 779 780 781
					count += 1
				else:
					count = 10
			if count < 9:
				ue_ip_status -= 1
				continue
782 783 784 785 786
			UE_IPAddress = result.group('ueipaddress')
			logging.debug('\u001B[1mUE (' + device_id + ') IP Address is ' + UE_IPAddress + '\u001B[0m')
			for ueipaddress in self.UEIPAddresses:
				if ueipaddress == UE_IPAddress:
					logging.debug('\u001B[1mUE (' + device_id + ') IP Address ' + UE_IPAddress + 'has been existed!' + '\u001B[0m')
787 788
					ue_ip_status -= 1
					continue
789
			self.UEIPAddresses.append(UE_IPAddress)
790
		self.close()
791
		return ue_ip_status
792

Raphael Defosseux's avatar
Raphael Defosseux committed
793 794 795 796 797 798 799 800 801
	def ping_iperf_wrong_exit(self, lock, UE_IPAddress, device_id, statusQueue, message):
		lock.acquire()
		statusQueue.put(-1)
		statusQueue.put(device_id)
		statusQueue.put(UE_IPAddress)
		statusQueue.put(message)
		lock.release()

	def Ping_common(self, lock, UE_IPAddress, device_id, statusQueue):
802 803 804 805 806
		try:
			self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
			self.command('cd scripts', '\$', 5)
			ping_time = re.findall("-c (\d+)",str(self.ping_args))
Raphael Defosseux's avatar
Raphael Defosseux committed
807 808 809 810 811 812 813
			ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' ' + UE_IPAddress + ' 2>&1 | stdbuf -o0 tee -a ping_' + SSH.testCase_id + '_' + device_id + '.log', '\$', int(ping_time[0])*1.5)
			# TIMEOUT CASE
			if ping_status < 0:
				message = 'Ping with UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
				return
814 815
			result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
			if result is None:
Raphael Defosseux's avatar
Raphael Defosseux committed
816 817
				message = 'Packet Loss Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
818
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
Raphael Defosseux's avatar
Raphael Defosseux committed
819
				return
820 821
			packetloss = result.group('packetloss')
			if float(packetloss) == 100:
Raphael Defosseux's avatar
Raphael Defosseux committed
822 823
				message = 'Packet Loss is 100%'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
824
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
Raphael Defosseux's avatar
Raphael Defosseux committed
825
				return
826 827
			result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
			if result is None:
Raphael Defosseux's avatar
Raphael Defosseux committed
828 829
				message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
830
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
Raphael Defosseux's avatar
Raphael Defosseux committed
831
				return
832 833 834
			rtt_min = result.group('rtt_min')
			rtt_avg = result.group('rtt_avg')
			rtt_max = result.group('rtt_max')
Raphael Defosseux's avatar
Raphael Defosseux committed
835 836 837 838
			pal_msg = 'Packet Loss : ' + packetloss + '%'
			min_msg = 'RTT(Min)    : ' + rtt_min + ' ms'
			avg_msg = 'RTT(Avg)    : ' + rtt_avg + ' ms'
			max_msg = 'RTT(Max)    : ' + rtt_max + ' ms'
839 840
			lock.acquire()
			logging.debug('\u001B[1;37;44m ping result (' + UE_IPAddress + ') \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
841 842 843 844 845 846
			logging.debug('\u001B[1;34m    ' + pal_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + min_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + avg_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + max_msg + '\u001B[0m')
			qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
			packetLossOK = True
847 848
			if packetloss is not None:
				if float(packetloss) > float(self.ping_packetloss_threshold):
Raphael Defosseux's avatar
Raphael Defosseux committed
849
					qMsg += '\nPacket Loss too high'
850
					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
851
					packetLossOK = False
852
				elif float(packetloss) > 0:
Raphael Defosseux's avatar
Raphael Defosseux committed
853
					qMsg += '\nPacket Loss is not 0%'
Raphael Defosseux's avatar
Raphael Defosseux committed
854
					logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
855 856 857 858 859 860 861 862
			if (packetLossOK):
				statusQueue.put(0)
			else:
				statusQueue.put(-1)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
			statusQueue.put(qMsg)
			lock.release()
863 864 865 866 867 868 869 870 871
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def Ping(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
Raphael Defosseux's avatar
Raphael Defosseux committed
872 873 874
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
875
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
876
			sys.exit(1)
877 878 879
		ueIpStatus = self.GetAllUEIPAddresses()
		if (ueIpStatus < 0):
			self.CreateHtmlTestRow(self.ping_args, 'KO', UE_IP_ADDRESS_ISSUE)
880
			self.CreateHtmlFooter(False)
881
			sys.exit(1)
882 883 884
		multi_jobs = []
		i = 0
		lock = Lock()
Raphael Defosseux's avatar
Raphael Defosseux committed
885
		status_queue = SimpleQueue()
886 887
		for UE_IPAddress in self.UEIPAddresses:
			device_id = self.UEDevices[i]
Raphael Defosseux's avatar
Raphael Defosseux committed
888
			p = Process(target = SSH.Ping_common, args = (lock,UE_IPAddress,device_id,status_queue,))
889 890 891 892 893 894
			p.daemon = True
			p.start()
			multi_jobs.append(p)
			i = i + 1
		for job in multi_jobs:
			job.join()
Raphael Defosseux's avatar
Raphael Defosseux committed
895 896

		if (status_queue.empty()):
897
			self.CreateHtmlTestRow(self.ping_args, 'KO', ALL_PROCESSES_OK)
898
			self.AutoTerminateUEandeNB()
899
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916
			sys.exit(1)
		else:
			ping_status = True
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					ping_status = False
				device_id = status_queue.get()
				ip_addr = status_queue.get()
				message = status_queue.get()
				html_cell = "<pre>UE (" + device_id + ")\nIP Address  : " + ip_addr + "\n" + message + "</pre>"
				html_queue.put(html_cell)
			if (ping_status):
				self.CreateHtmlTestRowQueue(self.ping_args, 'OK', len(self.UEDevices), html_queue)
			else:
				self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)
917
				self.AutoTerminateUEandeNB()
918
				self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
919
				sys.exit(1)
920

921 922 923 924 925 926 927
	def Iperf_ComputeTime(self):
		result = re.search('-t (?P<iperf_time>\d+)', str(self.iperf_args))
		if result is None:
			logging.debug('\u001B[1;37;41m Iperf time Not Found! \u001B[0m')
			sys.exit(1)
		return result.group('iperf_time')

928
	def Iperf_ComputeModifiedBW(self, idx, ue_num):
929 930 931 932 933
		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(self.iperf_args))
		if result is None:
			logging.debug('\u001B[1;37;41m Iperf bandwidth Not Found! \u001B[0m')
			sys.exit(1)
		iperf_bandwidth = result.group('iperf_bandwidth')
934 935 936 937 938 939 940 941 942 943 944
		if SSH.iperf_profile == 'balanced':
			iperf_bandwidth_new = float(iperf_bandwidth)/ue_num
		if SSH.iperf_profile == 'single-ue':
			iperf_bandwidth_new = float(iperf_bandwidth)
		if SSH.iperf_profile == 'unbalanced':
			# residual is 2% of max bw
			residualBW = float(iperf_bandwidth) / 50
			if idx == 0:
				iperf_bandwidth_new = float(iperf_bandwidth) - ((ue_num - 1) * residualBW)
			else:
				iperf_bandwidth_new = residualBW
945
		iperf_bandwidth_str = '-b ' + iperf_bandwidth
946
		iperf_bandwidth_str_new = '-b ' + ('%.2f' % iperf_bandwidth_new)
947 948 949 950 951 952
		result = re.sub(iperf_bandwidth_str, iperf_bandwidth_str_new, str(self.iperf_args))
		if result is None:
			logging.debug('\u001B[1;37;41m Calculate Iperf bandwidth Failed! \u001B[0m')
			sys.exit(1)
		return result

953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978
	def Iperf_analyzeV2TCPOutput(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
		self.command('awk -f /tmp/tcp_iperf_stats.awk /tmp/CI-eNB/scripts/iperf_' + SSH.testCase_id + '_' + device_id + '.log', '\$', 5)
		result = re.search('Avg Bitrate : (?P<average>[0-9\.]+ Mbits\/sec) Max Bitrate : (?P<maximum>[0-9\.]+ Mbits\/sec) Min Bitrate : (?P<minimum>[0-9\.]+ Mbits\/sec)', str(self.ssh.before))
		if result is not None:
			avgbitrate = result.group('average')
			maxbitrate = result.group('maximum')
			minbitrate = result.group('minimum')
			lock.acquire()
			logging.debug('\u001B[1;37;44m TCP iperf result (' + UE_IPAddress + ') \u001B[0m')
			msg = 'TCP Stats   :\n'
			if avgbitrate is not None:
				logging.debug('\u001B[1;34m    Avg Bitrate : ' + avgbitrate + '\u001B[0m')
				msg += 'Avg Bitrate : ' + avgbitrate + '\n'
			if maxbitrate is not None:
				logging.debug('\u001B[1;34m    Max Bitrate : ' + maxbitrate + '\u001B[0m')
				msg += 'Max Bitrate : ' + maxbitrate + '\n'
			if minbitrate is not None:
				logging.debug('\u001B[1;34m    Min Bitrate : ' + minbitrate + '\u001B[0m')
				msg += 'Min Bitrate : ' + minbitrate + '\n'
			statusQueue.put(0)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
			statusQueue.put(msg)
			lock.release()
		return 0

979
	def Iperf_analyzeV2Output(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
980 981 982 983
		result = re.search('-u', str(iperf_real_options))
		if result is None:
			return self.Iperf_analyzeV2TCPOutput(lock, UE_IPAddress, device_id, statusQueue, iperf_real_options)

984 985 986 987 988 989 990
		result = re.search('Server Report:', str(self.ssh.before))
		if result is None:
			result = re.search('read failed: Connection refused', str(self.ssh.before))
			if result is not None:
				logging.debug('\u001B[1;37;41m Could not connect to iperf server! \u001B[0m')
			else:
				logging.debug('\u001B[1;37;41m Server Report and Connection refused Not Found! \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
991
			return -1
992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009
		# Computing the requested bandwidth in float
		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(iperf_real_options))
		if result is not None:
			req_bandwidth = result.group('iperf_bandwidth')
			req_bw = float(req_bandwidth)
			result = re.search('-b [0-9\.]+K', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Kbits/sec' % req_bw
				req_bw = req_bw * 1000
			result = re.search('-b [0-9\.]+M', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Mbits/sec' % req_bw
				req_bw = req_bw * 1000000
			result = re.search('-b [0-9\.]+G', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Gbits/sec' % req_bw
				req_bw = req_bw * 1000000000

1010
		result = re.search('Server Report:\\\\r\\\\n(?:|\[ *\d+\].*) (?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(\d+\/..\d+) (\((?P<packetloss>[0-9\.]+)%\))', str(self.ssh.before))
1011 1012 1013 1014 1015 1016
		if result is not None:
			bitrate = result.group('bitrate')
			packetloss = result.group('packetloss')
			jitter = result.group('jitter')
			lock.acquire()
			logging.debug('\u001B[1;37;44m iperf result (' + UE_IPAddress + ') \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1017
			iperfStatus = True
1018 1019
			msg = 'Req Bitrate : ' + req_bandwidth + '\n'
			logging.debug('\u001B[1;34m    Req Bitrate : ' + req_bandwidth + '\u001B[0m')
1020
			if bitrate is not None:
Raphael Defosseux's avatar
Raphael Defosseux committed
1021
				msg += 'Bitrate     : ' + bitrate + '\n'
1022
				logging.debug('\u001B[1;34m    Bitrate     : ' + bitrate + '\u001B[0m')
1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038
				result = re.search('(?P<real_bw>[0-9\.]+) [KMG]bits/sec', str(bitrate))
				if result is not None:
					actual_bw = float(str(result.group('real_bw')))
					result = re.search('[0-9\.]+ K', bitrate)
					if result is not None:
						actual_bw = actual_bw * 1000
					result = re.search('[0-9\.]+ M', bitrate)
					if result is not None:
						actual_bw = actual_bw * 1000000
					result = re.search('[0-9\.]+ G', bitrate)
					if result is not None:
						actual_bw = actual_bw * 1000000000
					br_loss = 100 * actual_bw / req_bw
					bitperf = '%.2f ' % br_loss
					msg += 'Bitrate Perf: ' + bitperf + '%\n'
					logging.debug('\u001B[1;34m    Bitrate Perf: ' + bitperf + '%\u001B[0m')
1039
			if packetloss is not None:
Raphael Defosseux's avatar
Raphael Defosseux committed
1040
				msg += 'Packet Loss : ' + packetloss + '%\n'
1041 1042
				logging.debug('\u001B[1;34m    Packet Loss : ' + packetloss + '%\u001B[0m')
				if float(packetloss) > float(self.iperf_packetloss_threshold):
Raphael Defosseux's avatar
Raphael Defosseux committed
1043
					msg += 'Packet Loss too high!\n'
1044
					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1045
					iperfStatus = False
1046
			if jitter is not None:
Raphael Defosseux's avatar
Raphael Defosseux committed
1047
				msg += 'Jitter      : ' + jitter + '\n'
1048
				logging.debug('\u001B[1;34m    Jitter      : ' + jitter + '\u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1049 1050 1051 1052 1053 1054 1055
			if (iperfStatus):
				statusQueue.put(0)
			else:
				statusQueue.put(-1)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
			statusQueue.put(msg)
1056
			lock.release()
Raphael Defosseux's avatar
Raphael Defosseux committed
1057 1058 1059 1060
			return 0

	def Iperf_analyzeV2Server(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
		if (not os.path.isfile('iperf_server_' + SSH.testCase_id + '_' + device_id + '.log')):
Raphael Defosseux's avatar
Raphael Defosseux committed
1061
			self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, 'Could not analyze from server log')
Raphael Defosseux's avatar
Raphael Defosseux committed
1062 1063 1064 1065 1066
			return
		# Computing the requested bandwidth in float
		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(iperf_real_options))
		if result is None:
			logging.debug('Iperf bandwidth Not Found!')
Raphael Defosseux's avatar
Raphael Defosseux committed
1067
			self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, 'Could not compute Iperf bandwidth!')
Raphael Defosseux's avatar
Raphael Defosseux committed
1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152
			return
		else:
			req_bandwidth = result.group('iperf_bandwidth')
			req_bw = float(req_bandwidth)
			result = re.search('-b [0-9\.]+K', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Kbits/sec' % req_bw
				req_bw = req_bw * 1000
			result = re.search('-b [0-9\.]+M', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Mbits/sec' % req_bw
				req_bw = req_bw * 1000000
			result = re.search('-b [0-9\.]+G', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Gbits/sec' % req_bw
				req_bw = req_bw * 1000000000

		server_file = open('iperf_server_' + SSH.testCase_id + '_' + device_id + '.log', 'r')
		br_sum = 0.0
		ji_sum = 0.0
		pl_sum = 0
		ps_sum = 0
		row_idx = 0
		for line in server_file.readlines():
			result = re.search('(?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(?P<lostPack>[0-9]+)/ +(?P<sentPack>[0-9]+)', str(line))
			if result is not None:
				bitrate = result.group('bitrate')
				jitter = result.group('jitter')
				packetlost = result.group('lostPack')
				packetsent = result.group('sentPack')
				br = bitrate.split(' ')
				ji = jitter.split(' ')
				row_idx = row_idx + 1
				curr_br = float(br[0])
				pl_sum = pl_sum + int(packetlost)
				ps_sum = ps_sum + int(packetsent)
				if (br[1] == 'Kbits/sec'):
					curr_br = curr_br * 1000
				if (br[1] == 'Mbits/sec'):
					curr_br = curr_br * 1000 * 1000
				br_sum = curr_br + br_sum
				ji_sum = float(ji[0]) + ji_sum
		if (row_idx > 0):
			br_sum = br_sum / row_idx
			ji_sum = ji_sum / row_idx
			br_loss = 100 * br_sum / req_bw
			if (br_sum > 1000):
				br_sum = br_sum / 1000
				if (br_sum > 1000):
					br_sum = br_sum / 1000
					bitrate = '%.2f Mbits/sec' % br_sum
				else:
					bitrate = '%.2f Kbits/sec' % br_sum
			else:
				bitrate = '%.2f bits/sec' % br_sum
			bitperf = '%.2f ' % br_loss
			bitperf += '%'
			jitter = '%.2f ms' % (ji_sum)
			if (ps_sum > 0):
				pl = float(100 * pl_sum / ps_sum)
				packetloss = '%2.1f ' % (pl)
				packetloss += '%'
			else:
				packetloss = 'unknown'
			lock.acquire()
			if (br_loss < 90):
				statusQueue.put(1)
			else:
				statusQueue.put(0)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
			req_msg = 'Req Bitrate : ' + req_bandwidth
			bir_msg = 'Bitrate     : ' + bitrate
			brl_msg = 'Bitrate Perf: ' + bitperf
			jit_msg = 'Jitter      : ' + jitter
			pal_msg = 'Packet Loss : ' + packetloss
			statusQueue.put(req_msg + '\n' + bir_msg + '\n' + brl_msg + '\n' + jit_msg + '\n' + pal_msg + '\n')
			logging.debug('\u001B[1;37;45m iperf result (' + UE_IPAddress + ') \u001B[0m')
			logging.debug('\u001B[1;35m    ' + req_msg + '\u001B[0m')
			logging.debug('\u001B[1;35m    ' + bir_msg + '\u001B[0m')
			logging.debug('\u001B[1;35m    ' + brl_msg + '\u001B[0m')
			logging.debug('\u001B[1;35m    ' + jit_msg + '\u001B[0m')
			logging.debug('\u001B[1;35m    ' + pal_msg + '\u001B[0m')
			lock.release()
		else:
Raphael Defosseux's avatar
Raphael Defosseux committed
1153
			self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, 'Could not analyze from server log')
Raphael Defosseux's avatar
Raphael Defosseux committed
1154 1155 1156

		server_file.close()

1157

Raphael Defosseux's avatar
Raphael Defosseux committed
1158
	def Iperf_analyzeV3Output(self, lock, UE_IPAddress, device_id, statusQueue):
1159 1160 1161
		result = re.search('(?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?:|[0-9\.]+ ms +\d+\/\d+ \((?P<packetloss>[0-9\.]+)%\)) +(?:|receiver)\\\\r\\\\n(?:|\[ *\d+\] Sent \d+ datagrams)\\\\r\\\\niperf Done\.', str(self.ssh.before))
		if result is None:
			result = re.search('(?P<error>iperf: error - [a-zA-Z0-9 :]+)', str(self.ssh.before))
Raphael Defosseux's avatar
Raphael Defosseux committed
1162 1163 1164 1165
			lock.acquire()
			statusQueue.put(-1)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
1166 1167
			if result is not None:
				logging.debug('\u001B[1;37;41m ' + result.group('error') + ' \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1168
				statusQueue.put(result.group('error'))
1169 1170
			else:
				logging.debug('\u001B[1;37;41m Bitrate and/or Packet Loss Not Found! \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1171 1172 1173
				statusQueue.put('Bitrate and/or Packet Loss Not Found!')
			lock.release()

1174 1175 1176 1177 1178
		bitrate = result.group('bitrate')
		packetloss = result.group('packetloss')
		lock.acquire()
		logging.debug('\u001B[1;37;44m iperf result (' + UE_IPAddress + ') \u001B[0m')
		logging.debug('\u001B[1;34m    Bitrate     : ' + bitrate + '\u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1179 1180
		msg = 'Bitrate     : ' + bitrate + '\n'
		iperfStatus = True
1181 1182
		if packetloss is not None:
			logging.debug('\u001B[1;34m    Packet Loss : ' + packetloss + '%\u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1183
			msg += 'Packet Loss : ' + packetloss + '%\n'
1184 1185
			if float(packetloss) > float(self.iperf_packetloss_threshold):
				logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1186 1187 1188 1189 1190 1191 1192 1193
				msg += 'Packet Loss too high!\n'
				iperfStatus = False
		if (iperfStatus):
			statusQueue.put(0)
		else:
			statusQueue.put(-1)
		statusQueue.put(device_id)
		statusQueue.put(UE_IPAddress)
Raphael Defosseux's avatar
Raphael Defosseux committed
1194
		statusQueue.put(msg)
1195 1196
		lock.release()

Raphael Defosseux's avatar
Raphael Defosseux committed
1197
	def Iperf_UL_common(self, lock, UE_IPAddress, device_id, idx, ue_num, statusQueue):
1198 1199 1200 1201
		udpIperf = True
		result = re.search('-u', str(self.iperf_args))
		if result is None:
			udpIperf = False
1202 1203 1204 1205 1206 1207 1208 1209 1210 1211
		ipnumbers = UE_IPAddress.split('.')
		if (len(ipnumbers) == 4):
			ipnumbers[3] = '1'
		EPC_Iperf_UE_IPAddress = ipnumbers[0] + '.' + ipnumbers[1] + '.' + ipnumbers[2] + '.' + ipnumbers[3]

		# Launch iperf server on EPC side
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
		self.command('rm -f iperf_server_' + SSH.testCase_id + '_' + device_id + '.log', '\$', 5)
		port = 5001 + idx
1212 1213 1214 1215
		if udpIperf:
			self.command('echo $USER; nohup iperf -u -s -i 1 -p ' + str(port) + ' > iperf_server_' + SSH.testCase_id + '_' + device_id + '.log &', self.EPCUserName, 5)
		else:
			self.command('echo $USER; nohup iperf -s -i 1 -p ' + str(port) + ' > iperf_server_' + SSH.testCase_id + '_' + device_id + '.log &', self.EPCUserName, 5)
1216 1217 1218 1219 1220 1221 1222 1223 1224
		time.sleep(0.5)
		self.close()

		# Launch iperf client on UE
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
		iperf_time = self.Iperf_ComputeTime()
		time.sleep(0.5)

1225 1226 1227 1228
		if udpIperf:
			modified_options = self.Iperf_ComputeModifiedBW(idx, ue_num)
		else:
			modified_options = str(self.iperf_args)
Raphael Defosseux's avatar
Raphael Defosseux committed
1229
		modified_options = modified_options.replace('-R','')
1230 1231 1232
		time.sleep(0.5)

		self.command('rm -f iperf_' + SSH.testCase_id + '_' + device_id + '.log', '\$', 5)
Raphael Defosseux's avatar
Raphael Defosseux committed
1233 1234 1235 1236 1237 1238 1239 1240
		iperf_status = self.command('stdbuf -o0 adb -s ' + device_id + ' shell "/data/local/tmp/iperf -c ' + EPC_Iperf_UE_IPAddress + ' ' + modified_options + ' -p ' + str(port) + '" 2>&1 | stdbuf -o0 tee -a iperf_' + SSH.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
		# TIMEOUT Case
		if iperf_status < 0:
			self.close()
			message = 'iperf on UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT !'
			logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
			self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
			return
1241
		clientStatus = self.Iperf_analyzeV2Output(lock, UE_IPAddress, device_id, statusQueue, modified_options)
Raphael Defosseux's avatar
Raphael Defosseux committed
1242
		self.close()
1243

Raphael Defosseux's avatar
Raphael Defosseux committed
1244
		# Kill iperf server on EPC side
1245 1246 1247
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		self.command('killall --signal SIGKILL iperf', self.EPCUserName, 5)
		self.close()
Raphael Defosseux's avatar
Raphael Defosseux committed
1248
		# in case of failure, retrieve server log
Raphael Defosseux's avatar
Raphael Defosseux committed
1249 1250 1251 1252
		if (clientStatus == -1):
			time.sleep(1)
			if (os.path.isfile('iperf_server_' + SSH.testCase_id + '_' + device_id + '.log')):
				os.remove('iperf_server_' + SSH.testCase_id + '_' + device_id + '.log')
1253
			self.copyin(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, self.EPCSourceCodePath + '/scripts/iperf_server_' + SSH.testCase_id + '_' + device_id + '.log', '.')
Raphael Defosseux's avatar
Raphael Defosseux committed
1254
			self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, modified_options)
1255

Raphael Defosseux's avatar
Raphael Defosseux committed
1256
	def Iperf_common(self, lock, UE_IPAddress, device_id, idx, ue_num, statusQueue):
1257
		try:
1258 1259 1260
			# Single-UE profile -- iperf only on one UE
			if SSH.iperf_profile == 'single-ue' and idx != 0:
				return
1261
			useIperf3 = False
1262
			udpIperf = True
1263
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
Raphael Defosseux's avatar
Raphael Defosseux committed
1264
			# if by chance ADB server and EPC are on the same remote host, at least log collection will take care of it
Raphael Defosseux's avatar
Raphael Defosseux committed
1265 1266
			self.command('if [ ! -d ' + self.EPCSourceCodePath + '/scripts ]; then mkdir -p ' + self.EPCSourceCodePath + '/scripts ; fi', '\$', 5)
			self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
1267 1268 1269 1270 1271 1272
			# Checking if iperf / iperf3 are installed
			self.command('adb -s ' + device_id + ' shell "ls /data/local/tmp"', '\$', 5)
			result = re.search('iperf3', str(self.ssh.before))
			if result is None:
				result = re.search('iperf', str(self.ssh.before))
				if result is None:
Raphael Defosseux's avatar
Raphael Defosseux committed
1273 1274
					message = 'Neither iperf nor iperf3 installed on UE!'
					logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
Raphael Defosseux's avatar
Raphael Defosseux committed
1275
					self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
Raphael Defosseux's avatar
Raphael Defosseux committed
1276
					return
1277 1278
			else:
				useIperf3 = True
1279 1280 1281 1282 1283
			# in case of iperf, UL has its own function
			if (not useIperf3):
				result = re.search('-R', str(self.iperf_args))
				if result is not None:
					self.close()
Raphael Defosseux's avatar
Raphael Defosseux committed
1284
					self.Iperf_UL_common(lock, UE_IPAddress, device_id, idx, ue_num, statusQueue)
1285 1286
					return

1287 1288 1289
			if (useIperf3):
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/iperf3 -s &', '\$', 5)
			else:
1290
				self.command('rm -f iperf_server_' + SSH.testCase_id + '_' + device_id + '.log', '\$', 5)
1291 1292 1293 1294 1295 1296
				result = re.search('-u', str(self.iperf_args))
				if result is None:
					self.command('echo $USER; nohup adb -s ' + device_id + ' shell "/data/local/tmp/iperf -s -i 1" > iperf_server_' + SSH.testCase_id + '_' + device_id + '.log &', self.ADBUserName, 5)
					udpIperf = False
				else:
					self.command('echo $USER; nohup adb -s ' + device_id + ' shell "/data/local/tmp/iperf -u -s -i 1" > iperf_server_' + SSH.testCase_id + '_' + device_id + '.log &', self.ADBUserName, 5)
1297 1298 1299 1300
			time.sleep(0.5)
			self.close()

			self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
1301 1302
			self.command('cd ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
			iperf_time = self.Iperf_ComputeTime()
1303 1304
			time.sleep(0.5)

1305 1306 1307 1308
			if udpIperf:
				modified_options = self.Iperf_ComputeModifiedBW(idx, ue_num)
			else:
				modified_options = str(self.iperf_args)
1309 1310
			time.sleep(0.5)

1311 1312
			self.command('rm -f iperf_' + SSH.testCase_id + '_' + device_id + '.log', '\$', 5)
			if (useIperf3):
1313
				self.command('stdbuf -o0 iperf3 -c ' + UE_IPAddress + ' ' + modified_options + ' 2>&1 | stdbuf -o0 tee -a iperf_' + SSH.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
1314

Raphael Defosseux's avatar
Raphael Defosseux committed
1315
				clientStatus = 0
Raphael Defosseux's avatar
Raphael Defosseux committed
1316
				self.Iperf_analyzeV3Output(lock, UE_IPAddress, device_id, statusQueue)
1317
			else:
Raphael Defosseux's avatar
Raphael Defosseux committed
1318 1319 1320 1321 1322 1323 1324
				iperf_status = self.command('stdbuf -o0 iperf -c ' + UE_IPAddress + ' ' + modified_options + ' 2>&1 | stdbuf -o0 tee -a iperf_' + SSH.testCase_id + '_' + device_id + '.log', '\$', int(iperf_time)*5.0)
				if iperf_status < 0:
					self.close()
					message = 'iperf on UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT !'
					logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
					self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
					return
1325
				clientStatus = self.Iperf_analyzeV2Output(lock, UE_IPAddress, device_id, statusQueue, modified_options)
1326 1327 1328
			self.close()

			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
1329
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell ps | grep --color=never iperf | grep -v grep', '\$', 5)
1330 1331 1332 1333 1334
			result = re.search('shell +(?P<pid>\d+)', str(self.ssh.before))
			if result is not None:
				pid_iperf = result.group('pid')
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell kill -KILL ' + pid_iperf, '\$', 5)
			self.close()
Raphael Defosseux's avatar
Raphael Defosseux committed
1335 1336 1337 1338
			if (clientStatus == -1):
				time.sleep(1)
				if (os.path.isfile('iperf_server_' + SSH.testCase_id + '_' + device_id + '.log')):
					os.remove('iperf_server_' + SSH.testCase_id + '_' + device_id + '.log')
1339
				self.copyin(self.ADBIPAddress, self.ADBUserName, self.ADBPassword, self.EPCSourceCodePath + '/scripts/iperf_server_' + SSH.testCase_id + '_' + device_id + '.log', '.')
Raphael Defosseux's avatar
Raphael Defosseux committed
1340
				self.Iperf_analyzeV2Server(lock, UE_IPAddress, device_id, statusQueue, modified_options)
1341 1342 1343 1344 1345 1346 1347 1348
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def Iperf(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
Raphael Defosseux's avatar
Raphael Defosseux committed
1349 1350 1351
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.iperf_args, 'KO', pStatus)
1352
			self.AutoTerminateUEandeNB()
1353
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
1354
			sys.exit(1)
1355 1356
		ueIpStatus = self.GetAllUEIPAddresses()
		if (ueIpStatus < 0):
Raphael Defosseux's avatar
Raphael Defosseux committed
1357
			self.CreateHtmlTestRow(self.iperf_args, 'KO', UE_IP_ADDRESS_ISSUE)
1358
			self.AutoTerminateUEandeNB()
1359
			self.CreateHtmlFooter(False)
1360
			sys.exit(1)
1361 1362 1363 1364
		multi_jobs = []
		i = 0
		ue_num = len(self.UEIPAddresses)
		lock = Lock()
Raphael Defosseux's avatar
Raphael Defosseux committed
1365
		status_queue = SimpleQueue()
1366 1367
		for UE_IPAddress in self.UEIPAddresses:
			device_id = self.UEDevices[i]
Raphael Defosseux's avatar
Raphael Defosseux committed
1368
			p = Process(target = SSH.Iperf_common, args = (lock,UE_IPAddress,device_id,i,ue_num,status_queue,))
1369 1370 1371 1372 1373 1374
			p.daemon = True
			p.start()
			multi_jobs.append(p)
			i = i + 1
		for job in multi_jobs:
			job.join()
Raphael Defosseux's avatar
Raphael Defosseux committed
1375 1376

		if (status_queue.empty()):
1377
			self.CreateHtmlTestRow(self.iperf_args, 'KO', ALL_PROCESSES_OK)
1378
			self.AutoTerminateUEandeNB()
1379
			self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
1380 1381 1382
			sys.exit(1)
		else:
			iperf_status = True
Raphael Defosseux's avatar
Raphael Defosseux committed
1383
			iperf_noperf = False
Raphael Defosseux's avatar
Raphael Defosseux committed
1384 1385 1386 1387 1388
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					iperf_status = False
Raphael Defosseux's avatar
Raphael Defosseux committed
1389 1390
				if (count > 0):
					iperf_noperf = True
Raphael Defosseux's avatar
Raphael Defosseux committed
1391 1392 1393 1394 1395
				device_id = status_queue.get()
				ip_addr = status_queue.get()
				message = status_queue.get()
				html_cell = "<pre>UE (" + device_id + ")\nIP Address  : " + ip_addr + "\n" + message + "</pre>"
				html_queue.put(html_cell)
Raphael Defosseux's avatar
Raphael Defosseux committed
1396 1397 1398
			if (iperf_noperf and iperf_status):
				self.CreateHtmlTestRowQueue(self.iperf_args, 'PERF NOT MET', len(self.UEDevices), html_queue)
			elif (iperf_status):
Raphael Defosseux's avatar
Raphael Defosseux committed
1399 1400 1401
				self.CreateHtmlTestRowQueue(self.iperf_args, 'OK', len(self.UEDevices), html_queue)
			else:
				self.CreateHtmlTestRowQueue(self.iperf_args, 'KO', len(self.UEDevices), html_queue)
1402
				self.AutoTerminateUEandeNB()
1403
				self.CreateHtmlFooter(False)
Raphael Defosseux's avatar
Raphael Defosseux committed
1404
				sys.exit(1)
1405 1406 1407

	def CheckProcessExist(self, initialize_eNB_flag):