usrp_lib.cpp 50.6 KB
Newer Older
1 2 3 4 5
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
6
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */

knopp's avatar
knopp committed
22 23
/** usrp_lib.cpp
 *
24
 * \author: HongliangXU : hong-liang-xu@agilent.com
knopp's avatar
knopp committed
25 26 27 28 29 30
 */

#include <string.h>
#include <pthread.h>
#include <unistd.h>
#include <stdio.h>
31 32
#include <uhd/version.hpp>
#if UHD_VERSION < 3110000
knopp's avatar
knopp committed
33
#include <uhd/utils/thread_priority.hpp>
34 35 36
#else
#include <uhd/utils/thread.hpp>
#endif
knopp's avatar
knopp committed
37
#include <uhd/usrp/multi_usrp.hpp>
38
#include <uhd/version.hpp>
knopp's avatar
knopp committed
39 40
#include <boost/lexical_cast.hpp>
#include <boost/algorithm/string.hpp>
Florian Kaltenberger's avatar
Florian Kaltenberger committed
41 42
#include <boost/thread.hpp>
#include <boost/format.hpp>
knopp's avatar
knopp committed
43 44 45 46
#include <iostream>
#include <complex>
#include <fstream>
#include <cmath>
47
#include <time.h>
48
#include "common/utils/LOG/log.h"
knopp's avatar
knopp committed
49
#include "common_lib.h"
laurent's avatar
laurent committed
50
#include "assertions.h"
Mongazon's avatar
Mongazon committed
51 52
#include <sys/sysinfo.h>
#include <sys/resource.h>
laurent's avatar
laurent committed
53

54 55 56
#ifdef __SSE4_1__
#  include <smmintrin.h>
#endif
laurent's avatar
laurent committed
57

58 59 60
#ifdef __AVX2__
#  include <immintrin.h>
#endif
61

62 63 64 65
#ifdef __arm__
#  include <arm_neon.h>
#endif

66 67 68 69
/** @addtogroup _USRP_PHY_RF_INTERFACE_
 * @{
 */

laurent's avatar
laurent committed
70 71
/*! \brief USRP Configuration */
typedef struct {
knopp's avatar
knopp committed
72

73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107
  // --------------------------------
  // variables for USRP configuration
  // --------------------------------
  //! USRP device pointer
  uhd::usrp::multi_usrp::sptr usrp;

  //create a send streamer and a receive streamer
  //! USRP TX Stream
  uhd::tx_streamer::sptr tx_stream;
  //! USRP RX Stream
  uhd::rx_streamer::sptr rx_stream;

  //! USRP TX Metadata
  uhd::tx_metadata_t tx_md;
  //! USRP RX Metadata
  uhd::rx_metadata_t rx_md;

  //! Sampling rate
  double sample_rate;

  //! TX forward samples. We use usrp_time_offset to get this value
  int tx_forward_nsamps; //166 for 20Mhz

  // --------------------------------
  // Debug and output control
  // --------------------------------
  int num_underflows;
  int num_overflows;
  int num_seq_errors;
  int64_t tx_count;
  int64_t rx_count;
  int wait_for_first_pps;
  int use_gps;
  //! timestamp of RX packet
  openair0_timestamp rx_timestamp;
knopp's avatar
knopp committed
108

laurent's avatar
laurent committed
109
} usrp_state_t;
knopp's avatar
knopp committed
110

Florian Kaltenberger's avatar
Florian Kaltenberger committed
111 112
//void print_notes(void)
//{
113 114 115 116 117 118
// Helpful notes
//  std::cout << boost::format("**************************************Helpful Notes on Clock/PPS Selection**************************************\n");
//  std::cout << boost::format("As you can see, the default 10 MHz Reference and 1 PPS signals are now from the GPSDO.\n");
//  std::cout << boost::format("If you would like to use the internal reference(TCXO) in other applications, you must configure that explicitly.\n");
//  std::cout << boost::format("You can no longer select the external SMAs for 10 MHz or 1 PPS signaling.\n");
//  std::cout << boost::format("****************************************************************************************************************\n");
Florian Kaltenberger's avatar
Florian Kaltenberger committed
119 120
//}

121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171
static int sync_to_gps(openair0_device *device) {
  uhd::set_thread_priority_safe();
  //std::string args;
  //Set up program options
  //po::options_description desc("Allowed options");
  //desc.add_options()
  //("help", "help message")
  //("args", po::value<std::string>(&args)->default_value(""), "USRP device arguments")
  //;
  //po::variables_map vm;
  //po::store(po::parse_command_line(argc, argv, desc), vm);
  //po::notify(vm);
  //Print the help message
  //if (vm.count("help"))
  //{
  //  std::cout << boost::format("Synchronize USRP to GPS %s") % desc << std::endl;
  // return EXIT_FAILURE;
  //}
  //Create a USRP device
  //std::cout << boost::format("\nCreating the USRP device with: %s...\n") % args;
  //uhd::usrp::multi_usrp::sptr usrp = uhd::usrp::multi_usrp::make(args);
  //std::cout << boost::format("Using Device: %s\n") % usrp->get_pp_string();
  usrp_state_t *s = (usrp_state_t *)device->priv;

  try {
    size_t num_mboards = s->usrp->get_num_mboards();
    size_t num_gps_locked = 0;

    for (size_t mboard = 0; mboard < num_mboards; mboard++) {
      std::cout << "Synchronizing mboard " << mboard << ": " << s->usrp->get_mboard_name(mboard) << std::endl;
      //Set references to GPSDO
      s->usrp->set_clock_source("gpsdo", mboard);
      s->usrp->set_time_source("gpsdo", mboard);
      //std::cout << std::endl;
      //print_notes();
      //std::cout << std::endl;
      //Check for 10 MHz lock
      std::vector<std::string> sensor_names = s->usrp->get_mboard_sensor_names(mboard);

      if(std::find(sensor_names.begin(), sensor_names.end(), "ref_locked") != sensor_names.end()) {
        std::cout << "Waiting for reference lock..." << std::flush;
        bool ref_locked = false;

        for (int i = 0; i < 30 and not ref_locked; i++) {
          ref_locked = s->usrp->get_mboard_sensor("ref_locked", mboard).to_bool();

          if (not ref_locked) {
            std::cout << "." << std::flush;
            boost::this_thread::sleep(boost::posix_time::seconds(1));
          }
        }
knopp's avatar
knopp committed
172

173 174 175 176 177 178
        if(ref_locked) {
          std::cout << "LOCKED" << std::endl;
        } else {
          std::cout << "FAILED" << std::endl;
          std::cout << "Failed to lock to GPSDO 10 MHz Reference. Exiting." << std::endl;
          exit(EXIT_FAILURE);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
179
        }
180 181 182
      } else {
        std::cout << boost::format("ref_locked sensor not present on this board.\n");
      }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
183

184 185
      //Wait for GPS lock
      bool gps_locked = s->usrp->get_mboard_sensor("gps_locked", mboard).to_bool();
Florian Kaltenberger's avatar
Florian Kaltenberger committed
186

187 188 189 190
      if(gps_locked) {
        num_gps_locked++;
        std::cout << boost::format("GPS Locked\n");
      } else {
191
        LOG_W(HW,"WARNING:  GPS not locked - time will not be accurate until locked\n");
192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211
      }

      //Set to GPS time
      uhd::time_spec_t gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      //s->usrp->set_time_next_pps(gps_time+1.0, mboard);
      s->usrp->set_time_next_pps(uhd::time_spec_t(0.0));
      //Wait for it to apply
      //The wait is 2 seconds because N-Series has a known issue where
      //the time at the last PPS does not properly update at the PPS edge
      //when the time is actually set.
      boost::this_thread::sleep(boost::posix_time::seconds(2));
      //Check times
      gps_time = uhd::time_spec_t(time_t(s->usrp->get_mboard_sensor("gps_time", mboard).to_int()));
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps(mboard);
      std::cout << "USRP time: " << (boost::format("%0.9f") % time_last_pps.get_real_secs()) << std::endl;
      std::cout << "GPSDO time: " << (boost::format("%0.9f") % gps_time.get_real_secs()) << std::endl;
      //if (gps_time.get_real_secs() == time_last_pps.get_real_secs())
      //    std::cout << std::endl << "SUCCESS: USRP time synchronized to GPS time" << std::endl << std::endl;
      //else
      //    std::cerr << std::endl << "ERROR: Failed to synchronize USRP time to GPS time" << std::endl << std::endl;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
212
    }
213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245

    if (num_gps_locked == num_mboards and num_mboards > 1) {
      //Check to see if all USRP times are aligned
      //First, wait for PPS.
      uhd::time_spec_t time_last_pps = s->usrp->get_time_last_pps();

      while (time_last_pps == s->usrp->get_time_last_pps()) {
        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
      }

      //Sleep a little to make sure all devices have seen a PPS edge
      boost::this_thread::sleep(boost::posix_time::milliseconds(200));
      //Compare times across all mboards
      bool all_matched = true;
      uhd::time_spec_t mboard0_time = s->usrp->get_time_last_pps(0);

      for (size_t mboard = 1; mboard < num_mboards; mboard++) {
        uhd::time_spec_t mboard_time = s->usrp->get_time_last_pps(mboard);

        if (mboard_time != mboard0_time) {
          all_matched = false;
          std::cerr << (boost::format("ERROR: Times are not aligned: USRP 0=%0.9f, USRP %d=%0.9f")
                        % mboard0_time.get_real_secs()
                        % mboard
                        % mboard_time.get_real_secs()) << std::endl;
        }
      }

      if (all_matched) {
        std::cout << "SUCCESS: USRP times aligned" << std::endl << std::endl;
      } else {
        std::cout << "ERROR: USRP times are not aligned" << std::endl << std::endl;
      }
Florian Kaltenberger's avatar
Florian Kaltenberger committed
246
    }
247 248 249 250 251 252 253 254 255
  } catch (std::exception &e) {
    std::cout << boost::format("\nError: %s") % e.what();
    std::cout << boost::format("This could mean that you have not installed the GPSDO correctly.\n\n");
    std::cout << boost::format("Visit one of these pages if the problem persists:\n");
    std::cout << boost::format(" * N2X0/E1X0: http://files.ettus.com/manual/page_gpsdo.html");
    std::cout << boost::format(" * X3X0: http://files.ettus.com/manual/page_gpsdo_x3x0.html\n\n");
    std::cout << boost::format(" * E3X0: http://files.ettus.com/manual/page_usrp_e3x0.html#e3x0_hw_gps\n\n");
    exit(EXIT_FAILURE);
  }
knopp's avatar
knopp committed
256

257
  return EXIT_SUCCESS;
Florian Kaltenberger's avatar
Florian Kaltenberger committed
258
}
knopp's avatar
knopp committed
259

260 261 262 263
#if defined(USRP_REC_PLAY)
#include "usrp_lib.h"
static FILE    *pFile = NULL;
int             mmapfd = 0;
Mongazon's avatar
Mongazon committed
264 265
int             iqfd = 0;
int             use_mmap = 1; // default is to use mmap
266 267 268 269 270 271 272 273 274
struct stat     sb;
iqrec_t        *ms_sample = NULL;                      // memory for all subframes
unsigned int    nb_samples = 0;
unsigned int    cur_samples = 0;
int64_t         wrap_count = 0;
int64_t         wrap_ts = 0;
unsigned int    u_sf_mode = 0;                         // 1=record, 2=replay
unsigned int    u_sf_record = 0;                       // record mode
unsigned int    u_sf_replay = 0;                       // replay mode
Mongazon's avatar
Mongazon committed
275
char            u_sf_filename[1024] = "";              // subframes file path
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298
unsigned int    u_sf_max = DEF_NB_SF;                  // max number of recorded subframes
unsigned int    u_sf_loops = DEF_SF_NB_LOOP;           // number of loops in replay mode
unsigned int    u_sf_read_delay = DEF_SF_DELAY_READ;   // read delay in replay mode
unsigned int    u_sf_write_delay = DEF_SF_DELAY_WRITE; // write delay in replay mode

char config_opt_sf_file[] = CONFIG_OPT_SF_FILE;
char config_def_sf_file[] = DEF_SF_FILE;
char config_hlp_sf_file[] = CONFIG_HLP_SF_FILE;
char config_opt_sf_rec[] = CONFIG_OPT_SF_REC;
char config_hlp_sf_rec[] = CONFIG_HLP_SF_REC;
char config_opt_sf_rep[] = CONFIG_OPT_SF_REP;
char config_hlp_sf_rep[] = CONFIG_HLP_SF_REP;
char config_opt_sf_max[] = CONFIG_OPT_SF_MAX;
char config_hlp_sf_max[] = CONFIG_HLP_SF_MAX;
char config_opt_sf_loops[] = CONFIG_OPT_SF_LOOPS;
char config_hlp_sf_loops[] = CONFIG_HLP_SF_LOOPS;
char config_opt_sf_rdelay[] = CONFIG_OPT_SF_RDELAY;
char config_hlp_sf_rdelay[] = CONFIG_HLP_SF_RDELAY;
char config_opt_sf_wdelay[] = CONFIG_OPT_SF_WDELAY;
char config_hlp_sf_wdelay[] = CONFIG_HLP_SF_WDELAY;

#endif

299 300 301
/*! \brief Called to start the USRP transceiver. Return 0 if OK, < 0 if error
    @param device pointer to the device structure specific to the RF hardware target
*/
laurent's avatar
laurent committed
302
static int trx_usrp_start(openair0_device *device) {
303
#if defined(USRP_REC_PLAY)
304

305 306 307 308 309
  if (u_sf_mode != 2) { // not replay mode
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
    // setup GPIO for TDD, GPIO(4) = ATR_RX
    //set data direction register (DDR) to output
310
    s->usrp->set_gpio_attr("FP0", "DDR", 0x1f, 0x1f);
311
    //set control register to ATR
312
    s->usrp->set_gpio_attr("FP0", "CTRL", 0x1f,0x1f);
313
    //set ATR register
314
    s->usrp->set_gpio_attr("FP0", "ATR_RX", 1<<4, 0x1f);
laurent's avatar
laurent committed
315 316
    // init recv and send streaming
    uhd::stream_cmd_t cmd(uhd::stream_cmd_t::STREAM_MODE_START_CONTINUOUS);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
317 318
    LOG_I(PHY,"Time in secs now: %llu \n", s->usrp->get_time_now().to_ticks(s->sample_rate));
    LOG_I(PHY,"Time in secs last pps: %llu \n", s->usrp->get_time_last_pps().to_ticks(s->sample_rate));
319 320 321

    if (s->use_gps == 1) {
      s->wait_for_first_pps = 1;
322 323 324
      cmd.time_spec = s->usrp->get_time_last_pps() + uhd::time_spec_t(1.0);
    } else {
      s->wait_for_first_pps = 0;
325 326 327
      cmd.time_spec = s->usrp->get_time_now() + uhd::time_spec_t(0.05);
    }

laurent's avatar
laurent committed
328
    cmd.stream_now = false; // start at constant delay
laurent's avatar
laurent committed
329 330 331 332 333 334 335 336
    s->rx_stream->issue_stream_cmd(cmd);
    s->tx_md.time_spec = cmd.time_spec + uhd::time_spec_t(1-(double)s->tx_forward_nsamps/s->sample_rate);
    s->tx_md.has_time_spec = true;
    s->tx_md.start_of_burst = true;
    s->tx_md.end_of_burst = false;
    s->rx_count = 0;
    s->tx_count = 0;
    s->rx_timestamp = 0;
337
#if defined(USRP_REC_PLAY)
338 339 340 341
  }

#endif
  return 0;
knopp's avatar
knopp committed
342
}
laurent's avatar
laurent committed
343
/*! \brief Terminate operation of the USRP transceiver -- free all associated resources
344 345
 * \param device the hardware to use
 */
laurent's avatar
laurent committed
346
static void trx_usrp_end(openair0_device *device) {
347 348
#if defined(USRP_REC_PLAY) // For some ugly reason, this can be called several times...
  static int done = 0;
349

350
  if (done == 1) return;
351

352
  done = 1;
knopp's avatar
knopp committed
353

354 355 356
  if (u_sf_mode != 2) { // not subframes replay
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
laurent's avatar
laurent committed
357 358 359 360 361
    s->rx_stream->issue_stream_cmd(uhd::stream_cmd_t::STREAM_MODE_STOP_CONTINUOUS);
    //send a mini EOB packet
    s->tx_md.end_of_burst = true;
    s->tx_stream->send("", 0, s->tx_md);
    s->tx_md.end_of_burst = false;
362
    sleep(1);
363
#if defined(USRP_REC_PLAY)
364 365
  }

366 367
#endif
#if defined(USRP_REC_PLAY)
368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385

  if (u_sf_mode == 1) { // subframes store
    pFile = fopen (u_sf_filename,"wb+");

    if (pFile == NULL) {
      std::cerr << "Cannot open " << u_sf_filename << std::endl;
    } else {
      unsigned int i = 0;
      unsigned int modu = 0;

      if ((modu = nb_samples % 10) != 0) {
        nb_samples -= modu; // store entire number of frames
      }

      std::cerr << "Writing " << nb_samples << " subframes to " << u_sf_filename << " ..." << std::endl;

      for (i = 0; i < nb_samples; i++) {
        fwrite(ms_sample+i, sizeof(unsigned char), sizeof(iqrec_t), pFile);
386
      }
387 388 389

      fclose (pFile);
      std::cerr << "File " << u_sf_filename << " closed." << std::endl;
390
    }
391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411
  }

  if (u_sf_mode == 1) { // record
    if (ms_sample != NULL) {
      free((void *)ms_sample);
      ms_sample = NULL;
    }
  }

  if (u_sf_mode == 2) { // replay
    if (use_mmap) {
      if (ms_sample != MAP_FAILED) {
        munmap(ms_sample, sb.st_size);
        ms_sample = NULL;
      }

      if (mmapfd != 0) {
        close(mmapfd);
        mmapfd = 0;
      }
    } else {
412
      if (ms_sample != NULL) {
413 414
        free(ms_sample);
        ms_sample = NULL;
415
      }
416 417 418 419

      if (iqfd != 0) {
        close(iqfd);
        iqfd = 0;
420 421
      }
    }
422 423 424
  }

#endif
knopp's avatar
knopp committed
425
}
426

427 428
/*! \brief Called to send samples to the USRP RF target
      @param device pointer to the device structure specific to the RF hardware target
429
      @param timestamp The timestamp at which the first sample MUST be sent
430 431
      @param buff Buffer which holds the samples
      @param nsamps number of samples to be sent
432
      @param antenna_id index of the antenna if the device has multiple antennas
433
      @param flags flags must be set to TRUE if timestamp parameter needs to be applied
laurent's avatar
laurent committed
434 435
*/
static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int cc, int flags) {
436
  int ret=0;
437
#if defined(USRP_REC_PLAY)
438

439
  if (u_sf_mode != 2) { // not replay mode
440 441 442
#endif
    usrp_state_t *s = (usrp_state_t *)device->priv;
    int nsamps2;  // aligned to upper 32 or 16 byte boundary
443 444
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
445 446
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tx[2][nsamps2];
447
#else
448 449
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tx[2][nsamps2];
450 451
#endif
#elif defined(__arm__)
452 453
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tx[2][nsamps2];
454
#endif
455 456 457 458

    // bring RX data into 12 LSBs for softmodem RX
    for (int i=0; i<cc; i++) {
      for (int j=0; j<nsamps2; j++) {
459 460
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
461
        buff_tx[i][j] = _mm256_slli_epi16(((__m256i *)buff[i])[j],4);
462
#else
463
        buff_tx[i][j] = _mm_slli_epi16(((__m128i *)buff[i])[j],4);
464 465
#endif
#elif defined(__arm__)
466
        buff_tx[i][j] = vshlq_n_s16(((int16x8_t *)buff[i])[j],4);
467
#endif
468
      }
laurent's avatar
laurent committed
469 470
    }

471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511
    s->tx_md.time_spec = uhd::time_spec_t::from_ticks(timestamp, s->sample_rate);
    s->tx_md.has_time_spec = flags;

    if(flags>0)
      s->tx_md.has_time_spec = true;
    else
      s->tx_md.has_time_spec = false;

    if (flags == 2) { // start of burst
      s->tx_md.start_of_burst = true;
      s->tx_md.end_of_burst = false;
    } else if (flags == 3) { // end of burst
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = true;
    } else if (flags == 4) { // start and end
      s->tx_md.start_of_burst = true;
      s->tx_md.end_of_burst = true;
    } else if (flags==1) { // middle of burst
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = false;
    }

    if(flags==10) { // fail safe mode
      s->tx_md.has_time_spec = false;
      s->tx_md.start_of_burst = false;
      s->tx_md.end_of_burst = true;
    }

    if (cc>1) {
      std::vector<void *> buff_ptrs;

      for (int i=0; i<cc; i++)
        buff_ptrs.push_back(buff_tx[i]);

      ret = (int)s->tx_stream->send(buff_ptrs, nsamps, s->tx_md,1e-3);
    } else
      ret = (int)s->tx_stream->send(buff_tx[0], nsamps, s->tx_md,1e-3);

    if (ret != nsamps)
      LOG_E(PHY,"[xmit] tx samples %d != %d\n",ret,nsamps);

512 513 514 515 516 517 518 519
#if defined(USRP_REC_PLAY)
  } else {
    struct timespec req;
    req.tv_sec = 0;
    req.tv_nsec = u_sf_write_delay * 1000;
    nanosleep(&req, NULL);
    ret = nsamps;
  }
520

521
#endif
522
  return ret;
knopp's avatar
knopp committed
523 524
}

525 526 527 528 529 530 531 532 533 534 535
/*! \brief Receive samples from hardware.
 * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
 * the first channel. *ptimestamp is the time at which the first sample
 * was received.
 * \param device the hardware to use
 * \param[out] ptimestamp the time at which the first sample was received.
 * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
 * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
 * \param antenna_id Index of antenna for which to receive samples
 * \returns the number of sample read
*/
laurent's avatar
laurent committed
536
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
537
  usrp_state_t *s = (usrp_state_t *)device->priv;
538 539 540
  int samples_received=0,i,j;
  int nsamps2;  // aligned to upper 32 or 16 byte boundary
#if defined(USRP_REC_PLAY)
541

542
  if (u_sf_mode != 2) { // not replay mode
543
#endif
544 545
#if defined(__x86_64) || defined(__i386__)
#ifdef __AVX2__
laurent's avatar
laurent committed
546 547
    nsamps2 = (nsamps+7)>>3;
    __m256i buff_tmp[2][nsamps2];
548
#else
laurent's avatar
laurent committed
549 550
    nsamps2 = (nsamps+3)>>2;
    __m128i buff_tmp[2][nsamps2];
551 552
#endif
#elif defined(__arm__)
laurent's avatar
laurent committed
553 554
    nsamps2 = (nsamps+3)>>2;
    int16x8_t buff_tmp[2][nsamps2];
555 556
#endif

laurent's avatar
laurent committed
557
    if (device->type == USRP_B200_DEV) {
558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578
      if (cc>1) {
        // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;

        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff_tmp[i]);

        samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
        // receive a single channel (e.g. from connector RF A)
        samples_received=0;

        while (samples_received != nsamps) {
          samples_received += s->rx_stream->recv(buff_tmp[0]+samples_received,
                                                 nsamps-samples_received, s->rx_md);

          if  ((s->wait_for_first_pps == 0) && (s->rx_md.error_code!=uhd::rx_metadata_t::ERROR_CODE_NONE))
            break;

          if ((s->wait_for_first_pps == 1) && (samples_received != nsamps)) {
            printf("sleep...\n"); //usleep(100);
          }
laurent's avatar
laurent committed
579
        }
580 581 582 583 584 585 586

        if (samples_received == nsamps) s->wait_for_first_pps=0;
      }

      // bring RX data into 12 LSBs for softmodem RX
      for (int i=0; i<cc; i++) {
        for (int j=0; j<nsamps2; j++) {
587 588
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
589
          ((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
590
#else
591
          ((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
592 593
#endif
#elif defined(__arm__)
594
          ((int16x8_t *)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
595
#endif
laurent's avatar
laurent committed
596
        }
597
      }
laurent's avatar
laurent committed
598
    } else if (device->type == USRP_X300_DEV) {
599 600 601
      if (cc>1) {
        // receive multiple channels (e.g. RF A and RF B)
        std::vector<void *> buff_ptrs;
laurent's avatar
laurent committed
602

603 604 605 606 607 608 609
        for (int i=0; i<cc; i++) buff_ptrs.push_back(buff[i]);

        samples_received = s->rx_stream->recv(buff_ptrs, nsamps, s->rx_md);
      } else {
        // receive a single channel (e.g. from connector RF A)
        samples_received = s->rx_stream->recv(buff[0], nsamps, s->rx_md);
      }
610
    }
611

laurent's avatar
laurent committed
612
    if (samples_received < nsamps)
613
      LOG_E(PHY,"[recv] received %d samples out of %d\n",samples_received,nsamps);
614

laurent's avatar
laurent committed
615
    if ( s->rx_md.error_code != uhd::rx_metadata_t::ERROR_CODE_NONE)
616
      LOG_E(PHY, "%s\n", s->rx_md.to_pp_string(true).c_str());
617

laurent's avatar
laurent committed
618 619 620
    s->rx_count += nsamps;
    s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
    *ptimestamp = s->rx_timestamp;
621 622
#if defined (USRP_REC_PLAY)
  }
623 624

#endif
625
#if defined(USRP_REC_PLAY)
626

627 628 629
  if (u_sf_mode == 1) { // record mode
    // Copy subframes to memory (later dump on a file)
    if (nb_samples < u_sf_max) {
630
      (ms_sample+nb_samples)->header = BELL_LABS_IQ_HEADER;
631 632 633 634 635 636 637 638
      (ms_sample+nb_samples)->ts = *ptimestamp;
      memcpy((ms_sample+nb_samples)->samples, buff[0], nsamps*4);
      nb_samples++;
    }
  } else if (u_sf_mode == 2) { // replay mode
    if (cur_samples == nb_samples) {
      cur_samples = 0;
      wrap_count++;
639

640
      if (wrap_count == u_sf_loops) {
641 642
        std::cerr << "USRP device terminating subframes replay mode after " << u_sf_loops << " loops." << std::endl;
        return 0; // should make calling process exit
643
      }
644

645
      wrap_ts = wrap_count * (nb_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000));
646

Mongazon's avatar
Mongazon committed
647
      if (!use_mmap) {
648 649 650 651 652
        if (lseek(iqfd, 0, SEEK_SET) == 0) {
          std::cerr << "Seeking at the beginning of IQ file" << std::endl;
        } else {
          std::cerr << "Problem seeking at the beginning of IQ file" << std::endl;
        }
Mongazon's avatar
Mongazon committed
653
      }
654
    }
655

Mongazon's avatar
Mongazon committed
656 657
    if (use_mmap) {
      if (cur_samples < nb_samples) {
658 659 660 661 662 663 664 665 666
        *ptimestamp = (ms_sample[0].ts + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000))) + wrap_ts;

        if (cur_samples == 0) {
          std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
                    << " ts=" << *ptimestamp << std::endl;
        }

        memcpy(buff[0], &ms_sample[cur_samples].samples[0], nsamps*4);
        cur_samples++;
Mongazon's avatar
Mongazon committed
667 668 669 670
      }
    } else {
      // read sample from file
      if (read(iqfd, ms_sample, sizeof(iqrec_t)) != sizeof(iqrec_t)) {
671 672 673 674 675 676
        std::cerr << "pb reading iqfile at index " << sizeof(iqrec_t)*cur_samples << std::endl;
        close(iqfd);
        free(ms_sample);
        ms_sample = NULL;
        iqfd = 0;
        exit(-1);
Mongazon's avatar
Mongazon committed
677 678 679
      }

      if (cur_samples < nb_samples) {
680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696
        static int64_t ts0 = 0;

        if ((cur_samples == 0) && (wrap_count == 0)) {
          ts0 = ms_sample->ts;
        }

        *ptimestamp = ts0 + (cur_samples * (((int)(device->openair0_cfg[0].sample_rate)) / 1000)) + wrap_ts;

        if (cur_samples == 0) {
          std::cerr << "starting subframes file with wrap_count=" << wrap_count << " wrap_ts=" << wrap_ts
                    << " ts=" << *ptimestamp << std::endl;
        }

        memcpy(buff[0], &ms_sample->samples[0], nsamps*4);
        cur_samples++;
        // Prepare for next read
        off_t where = lseek(iqfd, cur_samples * sizeof(iqrec_t), SEEK_SET);
697 698
      }
    }
699

700
    struct timespec req;
701

702
    req.tv_sec = 0;
703

704
    req.tv_nsec = u_sf_read_delay * 1000;
705

706
    nanosleep(&req, NULL);
707

708 709
    return nsamps;
  }
710

711 712
#endif
  return samples_received;
knopp's avatar
knopp committed
713 714
}

715 716 717 718
/*! \brief Compares two variables within precision
 * \param a first variable
 * \param b second variable
*/
laurent's avatar
laurent committed
719
static bool is_equal(double a, double b) {
720
  return std::fabs(a-b) < std::numeric_limits<double>::epsilon();
knopp's avatar
knopp committed
721
}
knopp's avatar
knopp committed
722

723
void *freq_thread(void *arg) {
724 725 726 727
  openair0_device *device=(openair0_device *)arg;
  usrp_state_t *s = (usrp_state_t *)device->priv;
  s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
  s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
728
  return NULL;
729 730
}
/*! \brief Set frequencies (TX/RX). Spawns a thread to handle the frequency change to not block the calling thread
731 732 733
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
 * \param dummy dummy variable not used
laurent's avatar
laurent committed
734
 * \returns 0 in success
735
 */
736 737 738 739 740 741 742 743 744 745 746 747
int trx_usrp_set_freq(openair0_device *device, openair0_config_t *openair0_cfg, int dont_block) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  pthread_t f_thread;
  printf("Setting USRP TX Freq %f, RX Freq %f\n",openair0_cfg[0].tx_freq[0],openair0_cfg[0].rx_freq[0]);

  // spawn a thread to handle the frequency change to not block the calling thread
  if (dont_block == 1)
    pthread_create(&f_thread,NULL,freq_thread,(void *)device);
  else {
    s->usrp->set_tx_freq(device->openair0_cfg[0].tx_freq[0]);
    s->usrp->set_rx_freq(device->openair0_cfg[0].rx_freq[0]);
  }
knopp's avatar
knopp committed
748

749
  return(0);
knopp's avatar
knopp committed
750 751
}

laurent's avatar
laurent committed
752
/*! \brief Set RX frequencies
753 754
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
755
 * \returns 0 in success
756
 */
757 758 759 760 761 762 763 764 765 766
int openair0_set_rx_frequencies(openair0_device *device, openair0_config_t *openair0_cfg) {
  usrp_state_t *s = (usrp_state_t *)device->priv;
  static int first_call=1;
  static double rf_freq,diff;
  uhd::tune_request_t rx_tune_req(openair0_cfg[0].rx_freq[0]);
  rx_tune_req.rf_freq_policy = uhd::tune_request_t::POLICY_MANUAL;
  rx_tune_req.rf_freq = openair0_cfg[0].rx_freq[0];
  rf_freq=openair0_cfg[0].rx_freq[0];
  s->usrp->set_rx_freq(rx_tune_req);
  return(0);
knopp's avatar
knopp committed
767 768
}

769 770 771
/*! \brief Set Gains (TX/RX)
 * \param device the hardware to use
 * \param openair0_cfg RF frontend parameters set by application
laurent's avatar
laurent committed
772
 * \returns 0 in success
773
 */
774
int trx_usrp_set_gains(openair0_device *device,
laurent's avatar
laurent committed
775
                       openair0_config_t *openair0_cfg) {
776 777 778 779 780 781 782 783 784 785 786
  usrp_state_t *s = (usrp_state_t *)device->priv;
  ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(0);
  s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[0]);
  ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(0);

  // limit to maximum gain
  if (openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] > gain_range.stop()) {
    LOG_E(PHY,"RX Gain 0 too high, reduce by %f dB\n",
          openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0] - gain_range.stop());
    exit(-1);
  }
laurent's avatar
laurent committed
787

788 789 790 791 792
  s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0]);
  LOG_I(PHY,"Setting USRP RX gain to %f (rx_gain %f,gain_range.stop() %f)\n",
        openair0_cfg[0].rx_gain[0]-openair0_cfg[0].rx_gain_offset[0],
        openair0_cfg[0].rx_gain[0],gain_range.stop());
  return(0);
knopp's avatar
knopp committed
793
}
794

795 796 797
/*! \brief Stop USRP
 * \param card refers to the hardware index to use
 */
798 799
int trx_usrp_stop(openair0_device *device) {
  return(0);
800
}
801

802
/*! \brief USRPB210 RX calibration table */
803
rx_gain_calib_table_t calib_table_b210[] = {
804 805 806 807 808 809
  {3500000000.0,44.0},
  {2660000000.0,49.0},
  {2300000000.0,50.0},
  {1880000000.0,53.0},
  {816000000.0,58.0},
  {-1,0}
laurent's avatar
laurent committed
810
};
811

812
/*! \brief USRPB210 RX calibration table */
813
rx_gain_calib_table_t calib_table_b210_38[] = {
814 815 816 817 818 819
  {3500000000.0,44.0},
  {2660000000.0,49.8},
  {2300000000.0,51.0},
  {1880000000.0,53.0},
  {816000000.0,57.0},
  {-1,0}
laurent's avatar
laurent committed
820
};
821

822
/*! \brief USRPx310 RX calibration table */
823
rx_gain_calib_table_t calib_table_x310[] = {
824 825 826 827 828 829
  {3500000000.0,77.0},
  {2660000000.0,81.0},
  {2300000000.0,81.0},
  {1880000000.0,82.0},
  {816000000.0,85.0},
  {-1,0}
laurent's avatar
laurent committed
830 831 832
};

/*! \brief Set RX gain offset
833 834
 * \param openair0_cfg RF frontend parameters set by application
 * \param chain_index RF chain to apply settings to
laurent's avatar
laurent committed
835
 * \returns 0 in success
836
 */
837
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index,int bw_gain_adjust) {
838 839 840
  int i=0;
  // loop through calibration table to find best adjustment factor for RX frequency
  double min_diff = 6e9,diff,gain_adj=0.0;
841

842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870
  if (bw_gain_adjust==1) {
    switch ((int)openair0_cfg[0].sample_rate) {
      case 30720000:
        break;

      case 23040000:
        gain_adj=1.25;
        break;

      case 15360000:
        gain_adj=3.0;
        break;

      case 7680000:
        gain_adj=6.0;
        break;

      case 3840000:
        gain_adj=9.0;
        break;

      case 1920000:
        gain_adj=12.0;
        break;

      default:
        LOG_E(PHY,"unknown sampling rate %d\n",(int)openair0_cfg[0].sample_rate);
        exit(-1);
        break;
871
    }
872 873 874 875 876 877 878 879 880 881 882 883
  }

  while (openair0_cfg->rx_gain_calib_table[i].freq>0) {
    diff = fabs(openair0_cfg->rx_freq[chain_index] - openair0_cfg->rx_gain_calib_table[i].freq);
    LOG_I(PHY,"cal %d: freq %f, offset %f, diff %f\n",
          i,
          openair0_cfg->rx_gain_calib_table[i].freq,
          openair0_cfg->rx_gain_calib_table[i].offset,diff);

    if (min_diff > diff) {
      min_diff = diff;
      openair0_cfg->rx_gain_offset[chain_index] = openair0_cfg->rx_gain_calib_table[i].offset+gain_adj;
laurent's avatar
laurent committed
884
    }
885 886 887

    i++;
  }
888 889
}

laurent's avatar
laurent committed
890
/*! \brief print the USRP statistics
891 892 893
* \param device the hardware to use
* \returns  0 on success
*/
894 895
int trx_usrp_get_stats(openair0_device *device) {
  return(0);
896
}
897

laurent's avatar
laurent committed
898 899 900 901
/*! \brief Reset the USRP statistics
 * \param device the hardware to use
 * \returns  0 on success
 */
902 903
int trx_usrp_reset_stats(openair0_device *device) {
  return(0);
904
}
905

906 907
#if defined(USRP_REC_PLAY)
extern "C" {
908 909 910 911 912
  /*! \brief Initializer for USRP record/playback config
   * \param parameter array description
   * \returns  0 on success
   */
  int trx_usrp_recplay_config_init(paramdef_t *usrp_recplay_params) {
913 914 915 916
    // --subframes-file
    memcpy(usrp_recplay_params[0].optname, config_opt_sf_file, strlen(config_opt_sf_file));
    usrp_recplay_params[0].helpstr = config_hlp_sf_file;
    usrp_recplay_params[0].paramflags=PARAMFLAG_NOFREE;
Mongazon's avatar
Mongazon committed
917
    usrp_recplay_params[0].strptr=(char **)&u_sf_filename;
918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969
    usrp_recplay_params[0].defstrval = NULL;
    usrp_recplay_params[0].type=TYPE_STRING;
    usrp_recplay_params[0].numelt=sizeof(u_sf_filename);
    // --subframes-record
    memcpy(usrp_recplay_params[1].optname, config_opt_sf_rec, strlen(config_opt_sf_rec));
    usrp_recplay_params[1].helpstr = config_hlp_sf_rec;
    usrp_recplay_params[1].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[1].uptr=&u_sf_record;
    usrp_recplay_params[1].defuintval=0;
    usrp_recplay_params[1].type=TYPE_UINT;
    usrp_recplay_params[1].numelt=0;
    // --subframes-replay
    memcpy(usrp_recplay_params[2].optname, config_opt_sf_rep, strlen(config_opt_sf_rep));
    usrp_recplay_params[2].helpstr = config_hlp_sf_rep;
    usrp_recplay_params[2].paramflags=PARAMFLAG_BOOL;
    usrp_recplay_params[2].uptr=&u_sf_replay;
    usrp_recplay_params[2].defuintval=0;
    usrp_recplay_params[2].type=TYPE_UINT;
    usrp_recplay_params[2].numelt=0;
    // --subframes-max
    memcpy(usrp_recplay_params[3].optname, config_opt_sf_max, strlen(config_opt_sf_max));
    usrp_recplay_params[3].helpstr = config_hlp_sf_max;
    usrp_recplay_params[3].paramflags=0;
    usrp_recplay_params[3].uptr=&u_sf_max;
    usrp_recplay_params[3].defuintval=DEF_NB_SF;
    usrp_recplay_params[3].type=TYPE_UINT;
    usrp_recplay_params[3].numelt=0;
    // --subframes-loops
    memcpy(usrp_recplay_params[4].optname, config_opt_sf_loops, strlen(config_opt_sf_loops));
    usrp_recplay_params[4].helpstr = config_hlp_sf_loops;
    usrp_recplay_params[4].paramflags=0;
    usrp_recplay_params[4].uptr=&u_sf_loops;
    usrp_recplay_params[4].defuintval=DEF_SF_NB_LOOP;
    usrp_recplay_params[4].type=TYPE_UINT;
    usrp_recplay_params[4].numelt=0;
    // --subframes-read-delay
    memcpy(usrp_recplay_params[5].optname, config_opt_sf_rdelay, strlen(config_opt_sf_rdelay));
    usrp_recplay_params[5].helpstr = config_hlp_sf_rdelay;
    usrp_recplay_params[5].paramflags=0;
    usrp_recplay_params[5].uptr=&u_sf_read_delay;
    usrp_recplay_params[5].defuintval=DEF_SF_DELAY_READ;
    usrp_recplay_params[5].type=TYPE_UINT;
    usrp_recplay_params[5].numelt=0;
    // --subframes-write-delay
    memcpy(usrp_recplay_params[6].optname, config_opt_sf_wdelay, strlen(config_opt_sf_wdelay));
    usrp_recplay_params[6].helpstr = config_hlp_sf_wdelay;
    usrp_recplay_params[6].paramflags=0;
    usrp_recplay_params[6].uptr=&u_sf_write_delay;
    usrp_recplay_params[6].defuintval=DEF_SF_DELAY_WRITE;
    usrp_recplay_params[6].type=TYPE_UINT;
    usrp_recplay_params[6].numelt=0;
    return 0; // always ok
970
  }
971 972 973
}
#endif

974
extern "C" {
975 976 977 978
  /*! \brief Initialize Openair USRP target. It returns 0 if OK
   * \param device the hardware to use
   * \param openair0_cfg RF frontend parameters set by application
   */
979
  int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
980 981
    LOG_D(PHY, "openair0_cfg[0].sdr_addrs == '%s'\n", openair0_cfg[0].sdr_addrs);
    LOG_D(PHY, "openair0_cfg[0].clock_source == '%d'\n", openair0_cfg[0].clock_source);
982
#if defined(USRP_REC_PLAY)
983 984 985 986
    paramdef_t usrp_recplay_params[7];
    struct sysinfo systeminfo;
    // to check
    static int done = 0;
987

988 989 990
    if (done == 1) {
      return 0;
    } // prevent from multiple init
991

992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045
    done = 1;
    // end to check
    // Use mmap for IQ files for systems with less than 6GB total RAM
    sysinfo(&systeminfo);

    if (systeminfo.totalram < 6144000000) {
      use_mmap = 0;
    }

    memset(usrp_recplay_params, 0, 7*sizeof(paramdef_t));
    memset(&u_sf_filename[0], 0, 1024);

    if (trx_usrp_recplay_config_init(usrp_recplay_params) != 0) {
      std::cerr << "USRP device record/replay mode configuration error exiting" << std::endl;
      return -1;
    }

    config_process_cmdline(usrp_recplay_params,sizeof(usrp_recplay_params)/sizeof(paramdef_t),NULL);

    if (strlen(u_sf_filename) == 0) {
      (void) strcpy(u_sf_filename, DEF_SF_FILE);
    }

    if (u_sf_replay == 1) u_sf_mode = 2;

    if (u_sf_record == 1) u_sf_mode = 1;

    if (u_sf_mode == 2) {
      // Replay subframes from from file
      int bw_gain_adjust=0;
      device->openair0_cfg = openair0_cfg;
      device->type = USRP_B200_DEV;
      openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
      bw_gain_adjust=1;
      openair0_cfg[0].tx_sample_advance     = 80;
      openair0_cfg[0].tx_bw                 = 20e6;
      openair0_cfg[0].rx_bw                 = 20e6;
      openair0_cfg[0].iq_txshift = 4;//shift
      openair0_cfg[0].iq_rxrescale = 15;//rescale iqs
      set_rx_gain_offset(&openair0_cfg[0],0,bw_gain_adjust);
      device->priv = NULL;
      device->trx_start_func = trx_usrp_start;
      device->trx_write_func = trx_usrp_write;
      device->trx_read_func  = trx_usrp_read;
      device->trx_get_stats_func = trx_usrp_get_stats;
      device->trx_reset_stats_func = trx_usrp_reset_stats;
      device->trx_end_func   = trx_usrp_end;
      device->trx_stop_func  = trx_usrp_stop;
      device->trx_set_freq_func = trx_usrp_set_freq;
      device->trx_set_gains_func   = trx_usrp_set_gains;
      device->openair0_cfg = openair0_cfg;
      std::cerr << "USRP device initialized in subframes replay mode for " << u_sf_loops << " loops. Use mmap="
                << use_mmap << std::endl;
    } else {
1046
#endif
1047 1048
      uhd::set_thread_priority_safe(1.0);
      usrp_state_t *s = (usrp_state_t *)calloc(sizeof(usrp_state_t),1);
1049

1050 1051
      if (openair0_cfg[0].clock_source==gpsdo)
        s->use_gps =1;
laurent's avatar
laurent committed
1052

1053 1054 1055 1056 1057
      // Initialize USRP device
      device->openair0_cfg = openair0_cfg;
      int vers=0,subvers=0,subsubvers=0;
      int bw_gain_adjust=0;
#if defined(USRP_REC_PLAY)
laurent's avatar
laurent committed
1058

1059 1060 1061
      if (u_sf_mode == 1) {
        std::cerr << "USRP device initialized in subframes record mode" << std::endl;
      }
laurent's avatar
laurent committed
1062

1063 1064 1065 1066
#endif
      sscanf(uhd::get_version_string().c_str(),"%d.%d.%d",&vers,&subvers,&subsubvers);
      LOG_I(PHY,"Checking for USRPs : UHD %s (%d.%d.%d)\n",
            uhd::get_version_string().c_str(),vers,subvers,subsubvers);
laurent's avatar
laurent committed
1067

1068 1069 1070 1071 1072 1073
      std::string args;
      if (openair0_cfg[0].sdr_addrs == NULL) {
        args = "type=b200";
      } else {
        args = openair0_cfg[0].sdr_addrs;
      }
1074

1075
      uhd::device_addrs_t device_adds = uhd::device::find(args);
1076

1077
      if (device_adds.size() == 0) {
1078
        LOG_E(HW,"No USRP Device Found.\n ");
1079 1080 1081
        free(s);
        return -1;
      } else if (device_adds.size() > 1) {
1082
        LOG_E(HW,"More than one USRP Device Found. Please specify device more precisely in config file.\n");
1083 1084 1085 1086
	free(s);
	return -1;
      }

1087
      LOG_I(HW,"Found USRP %s\n", device_adds[0].get("type").c_str());
1088 1089 1090 1091 1092 1093
      double usrp_master_clock;

      if (device_adds[0].get("type") == "b200") {
        printf("Found USRP b200\n");
        device->type = USRP_B200_DEV;
        usrp_master_clock = 30.72e6;
1094
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
1095
      }
1096

1097 1098 1099 1100 1101 1102
      if (device_adds[0].get("type") == "n3xx") {
        printf("Found USRP n300\n");
        device->type=USRP_X300_DEV; //treat it as X300 for now
        usrp_master_clock = 122.88e6;
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      }
1103

1104 1105 1106 1107 1108 1109
      if (device_adds[0].get("type") == "x300") {
        printf("Found USRP x300\n");
        device->type=USRP_X300_DEV;
        usrp_master_clock = 184.32e6;
        args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
      }
1110

1111
      s->usrp = uhd::usrp::multi_usrp::make(args);
1112

1113 1114 1115 1116 1117
      // lock mboard clocks
      if (openair0_cfg[0].clock_source == internal)
        s->usrp->set_clock_source("internal");
      else
        s->usrp->set_clock_source("external");
1118

1119
      if (device->type==USRP_X300_DEV) {
1120 1121 1122 1123 1124
        openair0_cfg[0].rx_gain_calib_table = calib_table_x310;
#if defined(USRP_REC_PLAY)
        std::cerr << "-- Using calibration table: calib_table_x310" << std::endl; // Bell Labs info
#endif
        LOG_I(PHY,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);
laurent's avatar
laurent committed
1125

1126 1127 1128 1129 1130 1131 1132 1133
        switch ((int)openair0_cfg[0].sample_rate) {
          case 122880000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15; //to be checked
            openair0_cfg[0].tx_bw                 = 80e6;
            openair0_cfg[0].rx_bw                 = 80e6;
            break;
1134

1135 1136 1137 1138 1139 1140 1141
          case 61440000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15;
            openair0_cfg[0].tx_bw                 = 40e6;
            openair0_cfg[0].rx_bw                 = 40e6;
            break;
Massive's avatar
Massive committed
1142

1143 1144 1145 1146 1147 1148 1149
          case 30720000:
            // from usrp_time_offset
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 15;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;
Massive's avatar
Massive committed
1150

1151 1152 1153 1154 1155 1156
          case 15360000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 45;
            openair0_cfg[0].tx_bw                 = 10e6;
            openair0_cfg[0].rx_bw                 = 10e6;
            break;
1157

1158 1159 1160 1161 1162 1163
          case 7680000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 50;
            openair0_cfg[0].tx_bw                 = 5e6;
            openair0_cfg[0].rx_bw                 = 5e6;
            break;
1164

1165 1166 1167 1168 1169 1170
          case 1920000:
            //openair0_cfg[0].samples_per_packet    = 2048;
            openair0_cfg[0].tx_sample_advance     = 50;
            openair0_cfg[0].tx_bw                 = 1.25e6;
            openair0_cfg[0].rx_bw                 = 1.25e6;
            break;
Thomas Laurent's avatar
Thomas Laurent committed
1171

1172 1173 1174 1175 1176
          default:
            LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
            exit(-1);
            break;
        }
1177
      }
laurent's avatar
laurent committed
1178

1179
      if (device->type == USRP_B200_DEV) {
1180 1181 1182
        if ((vers == 3) && (subvers == 9) && (subsubvers>=2)) {
          openair0_cfg[0].rx_gain_calib_table = calib_table_b210;
          bw_gain_adjust=0;
1183
#if defined(USRP_REC_PLAY)
1184 1185 1186 1187 1188
          std::cerr << "-- Using calibration table: calib_table_b210" << std::endl; // Bell Labs info
#endif
        } else {
          openair0_cfg[0].rx_gain_calib_table = calib_table_b210_38;
          bw_gain_adjust=1;
1189
#if defined(USRP_REC_PLAY)
1190 1191 1192
          std::cerr << "-- Using calibration table: calib_table_b210_38" << std::endl; // Bell Labs info
#endif
        }
1193

1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238
        switch ((int)openair0_cfg[0].sample_rate) {
          case 30720000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 115;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 23040000:
            s->usrp->set_master_clock_rate(23.04e6); //to be checked
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 113;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 15360000:
            s->usrp->set_master_clock_rate(30.72e06);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 103;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 7680000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 80;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          case 1920000:
            s->usrp->set_master_clock_rate(30.72e6);
            //openair0_cfg[0].samples_per_packet    = 1024;
            openair0_cfg[0].tx_sample_advance     = 40;
            openair0_cfg[0].tx_bw                 = 20e6;
            openair0_cfg[0].rx_bw                 = 20e6;
            break;

          default:
            LOG_E(PHY,"Error: unknown sampling rate %f\n",openair0_cfg[0].sample_rate);
            exit(-1);
            break;
laurent's avatar
laurent committed
1239
        }
1240
      }
Thomas Laurent's avatar
Thomas Laurent committed
1241

1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261
      /* device specific */
      //openair0_cfg[0].txlaunch_wait = 1;//manage when TX processing is triggered
      //openair0_cfg[0].txlaunch_wait_slotcount = 1; //manage when TX processing is triggered
      openair0_cfg[0].iq_txshift = 4;//shift
      openair0_cfg[0].iq_rxrescale = 15;//rescale iqs

      for(int i=0; i<s->usrp->get_rx_num_channels(); i++) {
        if (i<openair0_cfg[0].rx_num_channels) {
          s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
          s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
          set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
          ::uhd::gain_range_t gain_range = s->usrp->get_rx_gain_range(i);
          // limit to maximum gain
          AssertFatal( openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] <= gain_range.stop(),
                       "RX Gain too high, lower by %f dB\n",
                       openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i] - gain_range.stop());
          s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],i);
          LOG_I(PHY,"RX Gain %d %f (%f) => %f (max %f)\n",i,
                openair0_cfg[0].rx_gain[i],openair0_cfg[0].rx_gain_offset[i],
                openair0_cfg[0].rx_gain[i]-openair0_cfg[0].rx_gain_offset[i],gain_range.stop());
laurent's avatar
laurent committed
1262
        }
1263
      }
1264

1265
      LOG_D(PHY, "usrp->get_tx_num_channels() == %zd\n", s->usrp->get_tx_num_channels());
1266
      LOG_D(PHY, "openair0_cfg[0].tx_num_channels == %d\n", openair0_cfg[0].tx_num_channels);
1267

1268 1269
      for(int i=0; i<s->usrp->get_tx_num_channels(); i++) {
        ::uhd::gain_range_t gain_range_tx = s->usrp->get_tx_gain_range(i);
1270

1271 1272 1273 1274
        if (i<openair0_cfg[0].tx_num_channels) {
          s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
          s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
          s->usrp->set_tx_gain(gain_range_tx.stop()-openair0_cfg[0].tx_gain[i],i);
1275
          LOG_I(PHY,"USRP TX_GAIN:%3.2lf gain_range:%3.2lf tx_gain:%3.2lf\n", gain_range_tx.stop()-openair0_cfg[0].tx_gain[i], gain_range_tx.stop(), openair0_cfg[0].tx_gain[i]);
laurent's avatar
laurent committed
1276
        }
1277
      }
laurent's avatar
laurent committed
1278

1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290
      //s->usrp->set_clock_source("external");
      //s->usrp->set_time_source("external");
      // display USRP settings
      LOG_I(PHY,"Actual master clock: %fMHz...\n",s->usrp->get_master_clock_rate()/1e6);
      sleep(1);
      // create tx & rx streamer
      uhd::stream_args_t stream_args_rx("sc16", "sc16");
      int samples=openair0_cfg[0].sample_rate;
      int max=s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps();
      samples/=10000;
      LOG_I(PHY,"RF board max packet size %u, size for 100µs jitter %d \n", max, samples);

1291
      if ( samples < max ) {
1292
        stream_args_rx.args["spp"] = str(boost::format("%d") % samples );
1293
      }
1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323

      LOG_I(PHY,"rx_max_num_samps %zu\n",
            s->usrp->get_rx_stream(stream_args_rx)->get_max_num_samps());

      for (int i = 0; i<openair0_cfg[0].rx_num_channels; i++)
        stream_args_rx.channels.push_back(i);

      s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
      uhd::stream_args_t stream_args_tx("sc16", "sc16");

      for (int i = 0; i<openair0_cfg[0].tx_num_channels; i++)
        stream_args_tx.channels.push_back(i);

      s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);

      /* Setting TX/RX BW after streamers are created due to USRP calibration issue */
      for(int i=0; i<s->usrp->get_tx_num_channels() && i<openair0_cfg[0].tx_num_channels; i++)
        s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);

      for(int i=0; i<s->usrp->get_rx_num_channels() && i<openair0_cfg[0].rx_num_channels; i++)
        s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);

      for (int i=0; i<openair0_cfg[0].rx_num_channels; i++) {
        LOG_I(PHY,"RX Channel %d\n",i);
        LOG_I(PHY,"  Actual RX sample rate: %fMSps...\n",s->usrp->get_rx_rate(i)/1e6);
        LOG_I(PHY,"  Actual RX frequency: %fGHz...\n", s->usrp->get_rx_freq(i)/1e9);
        LOG_I(PHY,"  Actual RX gain: %f...\n", s->usrp->get_rx_gain(i));
        LOG_I(PHY,"  Actual RX bandwidth: %fM...\n", s->usrp->get_rx_bandwidth(i)/1e6);
        LOG_I(PHY,"  Actual RX antenna: %s...\n", s->usrp->get_rx_antenna(i).c_str());
      }
laurent's avatar
laurent committed
1324

1325 1326 1327 1328 1329 1330 1331 1332
      for (int i=0; i<openair0_cfg[0].tx_num_channels; i++) {
        LOG_I(PHY,"TX Channel %d\n",i);
        LOG_I(PHY,"  Actual TX sample rate: %fMSps...\n", s->usrp->get_tx_rate(i)/1e6);
        LOG_I(PHY,"  Actual TX frequency: %fGHz...\n", s->usrp->get_tx_freq(i)/1e9);
        LOG_I(PHY,"  Actual TX gain: %f...\n", s->usrp->get_tx_gain(i));
        LOG_I(PHY,"  Actual TX bandwidth: %fM...\n", s->usrp->get_tx_bandwidth(i)/1e6);
        LOG_I(PHY,"  Actual TX antenna: %s...\n", s->usrp->get_tx_antenna(i).c_str());
      }
laurent's avatar
laurent committed
1333

1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362
      LOG_I(PHY,"Device timestamp: %f...\n", s->usrp->get_time_now().get_real_secs());
      device->priv = s;
      device->trx_start_func = trx_usrp_start;
      device->trx_write_func = trx_usrp_write;
      device->trx_read_func  = trx_usrp_read;
      device->trx_get_stats_func = trx_usrp_get_stats;
      device->trx_reset_stats_func = trx_usrp_reset_stats;
      device->trx_end_func   = trx_usrp_end;
      device->trx_stop_func  = trx_usrp_stop;
      device->trx_set_freq_func = trx_usrp_set_freq;
      device->trx_set_gains_func   = trx_usrp_set_gains;
      device->openair0_cfg = openair0_cfg;
      s->sample_rate = openair0_cfg[0].sample_rate;

      // TODO:
      // init tx_forward_nsamps based usrp_time_offset ex
      if(is_equal(s->sample_rate, (double)30.72e6))
        s->tx_forward_nsamps  = 176;

      if(is_equal(s->sample_rate, (double)15.36e6))
        s->tx_forward_nsamps = 90;

      if(is_equal(s->sample_rate, (double)7.68e6))
        s->tx_forward_nsamps = 50;

      if (s->use_gps == 1) {
        if (sync_to_gps(device)) {
          LOG_I(PHY,"USRP fails to sync with GPS...\n");
          exit(0);
Florian Kaltenberger's avatar
Florian Kaltenberger committed
1363
        }
1364
      }
1365 1366 1367 1368

#if defined(USRP_REC_PLAY)
    }

1369 1370
#endif
#if defined(USRP_REC_PLAY)
1371 1372 1373 1374 1375 1376 1377

    if (u_sf_mode == 1) { // record mode
      ms_sample = (iqrec_t *) malloc(u_sf_max * sizeof(iqrec_t));

      if (ms_sample == NULL) {
        std::cerr<< "Memory allocation failed for subframe record or replay mode." << std::endl;
        exit(-1);
1378
      }
1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440

      memset(ms_sample, 0, u_sf_max * BELL_LABS_IQ_BYTES_PER_SF);
    }

    if (u_sf_mode == 2) {
      if (use_mmap) {
        // use mmap
        mmapfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);

        if (mmapfd != 0) {
          fstat(mmapfd, &sb);
          std::cerr << "Loading subframes using mmap() from " << u_sf_filename << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
          ms_sample = (iqrec_t *) mmap(NULL, sb.st_size, PROT_WRITE, MAP_PRIVATE, mmapfd, 0);

          if (ms_sample != MAP_FAILED) {
            nb_samples = (sb.st_size / sizeof(iqrec_t));
            int aligned = (((unsigned long)ms_sample & 31) == 0)? 1:0;
            std::cerr<< "Loaded "<< nb_samples << " subframes." << std::endl;

            if (aligned == 0) {
              std::cerr<< "mmap address is not 32 bytes aligned, exiting." << std::endl;
              close(mmapfd);
              exit(-1);
            }
          } else {
            std::cerr << "Cannot mmap file, exiting." << std::endl;
            close(mmapfd);
            exit(-1);
          }
        } else {
          std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
          exit(-1);
        }
      } else {
        iqfd = open(u_sf_filename, O_RDONLY | O_LARGEFILE);

        if (iqfd != 0) {
          fstat(iqfd, &sb);
          nb_samples = (sb.st_size / sizeof(iqrec_t));
          std::cerr << "Loading " << nb_samples << " subframes from " << u_sf_filename
                    << " size=" << (uint64_t)sb.st_size << " bytes ..." << std::endl;
          // allocate buffer for 1 sample at a time
          ms_sample = (iqrec_t *) malloc(sizeof(iqrec_t));

          if (ms_sample == NULL) {
            std::cerr<< "Memory allocation failed for individual subframe replay mode." << std::endl;
            close(iqfd);
            exit(-1);
          }

          memset(ms_sample, 0, sizeof(iqrec_t));

          // point at beginning of file
          if (lseek(iqfd, 0, SEEK_SET) == 0) {
            std::cerr << "Initial seek at beginning of the file" << std::endl;
          } else {
            std::cerr << "Problem initial seek at beginning of the file" << std::endl;
          }
        } else {
          std::cerr << "Cannot open " << u_sf_filename << " , exiting." << std::endl;
          exit(-1);
        }
1441
      }
laurent's avatar
laurent committed
1442
    }
1443 1444 1445 1446

#endif
    return 0;
  }
knopp's avatar
knopp committed
1447
}
1448
/*@}*/