test_case_list.xml 582 KB
Newer Older
1
<testCaseList>
2

3
<MachineList>mozart hutch starsky stevens amerique calisson nano</MachineList>
Rohit Gupta's avatar
Rohit Gupta committed
4
 <NFSResultsShare>/mnt/sradio/TEST_RESULTS/</NFSResultsShare>
5 6
 <GitOAI5GRepo>https://gitlab.eurecom.fr/oai/openairinterface5g.git</GitOAI5GRepo>
 <GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
7
 <GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
8
 <GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
9
 <CleanUpOldProgs>oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim configure_cots* wvdial  iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone pppd starthss start_ltebox stop_ltebox configure_cots_sony_experia_m4_ue configure_cots_huaweiE398_ue configure_cots_bandrich_ue</CleanUpOldProgs>	
Rohit Gupta's avatar
Rohit Gupta committed
10
 <CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
11
<ExmimoRfStop>exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue;  sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg</ExmimoRfStop>
12
 <Timeout_execution>36000</Timeout_execution>
13
 <TestCaseExclusionList>010141 0102+ 010304 010305 0104+ 015502 015505 015508 015511 015514 015517 015602 015605 015702 015705 015802 015805 015808 015811 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025502 025505 025508 025511</TestCaseExclusionList>
14
 <nruns_lte-softmodem>3</nruns_lte-softmodem>
15
 <MachineListGeneric>mozart hutch starsky stevens amerique calisson </MachineListGeneric>
16 17 18 19
     <testCase id="010101" >
     <class>compilation</class>
     <desc>Build oaisim.Rel8</desc>
     <pre_compile_prog></pre_compile_prog>
20
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
21
     <compile_prog_args>--oaisim -r Rel8  -c </compile_prog_args>
22 23 24 25
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
26
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
27 28 29 30 31
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
32
     <tags>oaisim.Rel8</tags>
33
     <nruns>1</nruns>
34
     </testCase>
35

36 37
     <testCase id="010102" >
     <class>compilation</class>
38
     <desc>Build oaisim.Rel10</desc>
39
     <pre_compile_prog></pre_compile_prog>
40
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
41
     <compile_prog_args>--oaisim -r Rel10  -c </compile_prog_args>
42 43 44 45
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_build_oai/build/oaisim
                       $OPENAIR_DIR/cmake_targets/at_commands/build/at_nas_ue
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/usim
                       $OPENAIR_DIR/cmake_targets/nas_sim_tools/build/nvram</compile_prog_out>
46
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
47 48 49
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
50
     <search_expr_true></search_expr_true>
51
     <search_expr_false></search_expr_false>
52
     <tags>oaisim.Rel10</tags>
53 54 55 56 57
     <nruns>1</nruns>
     </testCase>

     <testCase id="010103" >
     <class>compilation</class>
58 59 60
     <desc>Build oaisim_noS1.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
61
     <compile_prog_args>--oaisim -r Rel10 --noS1  -c </compile_prog_args>
62 63 64 65
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/CMakeFiles/oai_nw_drv/oai_nw_drv.ko</compile_prog_out>
66
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
67 68 69 70 71
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
72
     <tags>oaisim_noS1.Rel10</tags>
73
     <nruns>1</nruns>
74
     </testCase> 
75

76
     <testCase id="010110" >
77
     <class>compilation</class>
78
     <desc>Build lte_softmodem_noS1.USRP.Rel10</desc>
79
     <pre_compile_prog></pre_compile_prog>
80
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
81
     <compile_prog_args>--eNB -w USRP -r Rel10 --noS1  -c </compile_prog_args>
82 83
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
Rohit Gupta's avatar
Rohit Gupta committed
84 85
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_usrpdevif.so</compile_prog_out>
86
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
87 88 89 90 91
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
92
     <tags>lte-softmodem_noS1.USRP.Rel10</tags>
93
     <nruns>1</nruns>
94
     </testCase> 
95

96
     <testCase id="010111" >
97
     <class>compilation</class>
98
     <desc>Build lte_softmodem_noS1.EXMIMO.Rel10</desc>
99
     <pre_compile_prog></pre_compile_prog>
100
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
101
     <compile_prog_args>--eNB -w EXMIMO -r Rel10 --noS1  -c </compile_prog_args>
102 103 104 105 106 107
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
108
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
109 110 111 112 113
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
114
     <tags>lte-softmodem_noS1.EXMIMO.Rel10</tags>
115
     <nruns>1</nruns>
116
     </testCase> 
117

118
     <testCase id="010112" >
119
     <class>compilation</class>
120
     <desc>Build lte_softmodem_noS1.BLADERF.Rel10</desc>
121
     <pre_compile_prog></pre_compile_prog>
122
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
123
     <compile_prog_args>--eNB -w BLADERF -r Rel10 --noS1  -c </compile_prog_args>
124 125
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
Rohit Gupta's avatar
Rohit Gupta committed
126 127
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_bladerfdevif.so</compile_prog_out>
128
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
129 130 131 132 133
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
134
     <tags>lte-softmodem_noS1.BLADERF.Rel10</tags>
135
     <nruns>1</nruns>
136 137 138
     </testCase> 

     <testCase id="010113" >
139
     <class>compilation</class>
140
     <desc>Build lte_softmodem_noS1.ETHERNET.Rel10</desc>
141
     <pre_compile_prog></pre_compile_prog>
142
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
143
     <compile_prog_args>--eNB -w None -t ETHERNET -r Rel10 --noS1  -c </compile_prog_args>
144 145
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
Rohit Gupta's avatar
Rohit Gupta committed
146 147
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
148
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
149 150 151 152 153
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
154
     <tags>lte-softmodem_noS1.ETHERNET.Rel10</tags>
155
     <nruns>1</nruns>
156 157
     </testCase> 

158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176
     <testCase id="010114" >
     <class>compilation</class>
     <desc>Build lte_softmodem_noS1.LMSSDR.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -r Rel10 --noS1  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
                       $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem_noS1.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>
177 178


179 180
     <testCase id="010120" >
     <class>compilation</class>
181
     <desc>Build lte_softmodem.USRP.Rel10</desc>
182
     <pre_compile_prog></pre_compile_prog>
183
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
184
     <compile_prog_args>--eNB -w USRP -r Rel10   -c </compile_prog_args>
Rohit Gupta's avatar
Rohit Gupta committed
185 186
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_usrpdevif.so</compile_prog_out>
187
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
188 189 190 191 192
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
193
     <tags>lte-softmodem.USRP.Rel10</tags>
194
     <nruns>1</nruns>
195
     </testCase> 
196

197 198 199 200 201
     <testCase id="010121" >
     <class>compilation</class>
     <desc>Build lte_softmodem.EXMIMO.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
202
     <compile_prog_args>--eNB -w EXMIMO -r Rel10   -c </compile_prog_args>
203 204 205 206
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/updatefw
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/oarf_config_exmimo.oct</compile_prog_out>
207
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
208 209 210 211 212
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
213
     <tags>lte-softmodem.EXMIMO.Rel10</tags>
214 215 216 217 218 219 220 221
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010122" >
     <class>compilation</class>
     <desc>Build lte_softmodem.BLADERF.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
222
     <compile_prog_args>--eNB -w BLADERF -r Rel10   -c </compile_prog_args>
Rohit Gupta's avatar
Rohit Gupta committed
223 224
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_bladerfdevif.so</compile_prog_out>
225
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
226 227 228 229 230
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
231
     <tags>lte-softmodem.BLADERF.Rel10</tags>
232 233 234 235 236 237 238 239
     <nruns>1</nruns>
     </testCase> 

     <testCase id="010123" >
     <class>compilation</class>
     <desc>Build lte_softmodem.ETHERNET.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
240 241 242
     <compile_prog_args>--eNB -w None -t ETHERNET -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_eth_transpro.so</compile_prog_out>
243
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
244 245 246 247 248 249 250 251
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.ETHERNET.Rel10</tags>
     <nruns>1</nruns>
     </testCase> 
252

253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270
     <testCase id="010124" >
     <class>compilation</class>
     <desc>Build lte_softmodem.LMSSDR.Rel10</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--eNB -w LMSSDR -r Rel10   -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
                       $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>lte-softmodem.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

271 272
     <testCase id="010130" >
     <class>compilation</class>
273 274 275
     <desc>Build phy unitary simulators + secuirity unitary tests</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
276
     <compile_prog_args>--phy_simulators --core_simulators  -c </compile_prog_args>
277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pucchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/prachsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pdcchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/pbchsim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/mbmssim
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt
                       $OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia2</compile_prog_out>
294
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
295 296 297 298 299 300 301 302 303 304 305 306
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>unitary-sim.Rel10</tags>
     <nruns>1</nruns>
     </testCase>


     <testCase id="010140" >
     <class>compilation</class>
Rohit Gupta's avatar
Rohit Gupta committed
307
     <desc>Build RRH Gateway for USRP(RF) + Ethernet (Transport)</desc>
308 309
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
310 311 312 313
     <compile_prog_args>--RRH -w USRP -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_usrpdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
314
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
315 316 317 318 319 320 321 322 323 324 325
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.USRP.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010141" >
     <class>compilation</class>
Rohit Gupta's avatar
Rohit Gupta committed
326
     <desc>Build RRH Gateway for EXMIMO(RF) + Ethernet (Transport)</desc>
327 328
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
329
     <compile_prog_args>--RRH -w EXMIMO -t ETHNERNET  -c </compile_prog_args>
330 331 332
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/CMakeFiles/openair_rf/openair_rf.ko
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/updatefw
Rohit Gupta's avatar
Rohit Gupta committed
333 334 335
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/oarf_config_exmimo.oct
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_exmimodevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
336
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
337 338 339 340 341 342 343 344 345 346 347
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.EXMIMO.Rel10</tags>
     <nruns>1</nruns>
     </testCase>

     <testCase id="010142" >
     <class>compilation</class>
348
     <desc>Build RRH Gateway for BladeRF (RF) nad Ethernet (transport)</desc>
349
     <pre_compile_prog></pre_compile_prog>
350
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
Rohit Gupta's avatar
Rohit Gupta committed
351 352 353 354
     <compile_prog_args>--RRH -w BLADERF -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_bladerfdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
355
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
356 357 358 359 360
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
361
     <tags>RRH.BLADERF.Rel10</tags>
362 363 364
     <nruns>1</nruns>
     </testCase>

365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382
    <testCase id="010143" >
     <class>compilation</class>
     <desc>Build RRH Gateway for LMSSDR (RF) and Ethernet (transport)</desc>
     <pre_compile_prog></pre_compile_prog>
     <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
     <compile_prog_args>--RRH -w LMSSDR -t ETHERNET  -c </compile_prog_args>
     <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_lmssdrdevif.so
                       $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
     <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
     <pre_exec_args></pre_exec_args>
     <main_exec></main_exec>
     <main_exec_args></main_exec_args>
     <search_expr_true></search_expr_true>
     <search_expr_false></search_expr_false>
     <tags>RRH.LMSSDR.Rel10</tags>
     <nruns>1</nruns>
     </testCase>
383

384 385
   <testCase id="010200">
      <class>execution</class>
386
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
387
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
388
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
389
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
390
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
391
      <pre_exec_args></pre_exec_args>
392
      <test_config_file></test_config_file>
393
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
394 395 396 397 398 399
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -s15 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -s15 </main_exec_args>
400
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
401 402 403 404 405 406 407
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010201">
      <class>execution</class>
408
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
409
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
410
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
411
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
412
      <test_config_file></test_config_file>
413
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
414
      <pre_exec_args></pre_exec_args>
415
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
416 417 418 419 420 421
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -a -s15 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -a -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -a -s15 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -a -s15 </main_exec_args>
422
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2</tags>
423 424 425 426 427 428 429
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010202">
      <class>execution</class>
430
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
431
<pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
432
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
433
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
434
      <test_config_file></test_config_file>
435
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
436
      <pre_exec_args></pre_exec_args>
437
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
438 439 440 441 442 443
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -s15 </main_exec_args>
444
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
445 446 447 448 449 450 451 452
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010203">
      <class>execution</class>
      <desc>Run OAISIM Rel10 TDD, 1 eNB + 3 UEs (5 MHz) in PHY_ABSTRACTION mode and search for errors, segmentation fault or exit</desc>
453
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
454
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
455
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
456
      <test_config_file></test_config_file>
457
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
458
      <pre_exec_args></pre_exec_args>
459
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
460 461 462 463 464 465
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -a -s15
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -a -s15
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -a -s15</main_exec_args>
466
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2  oaisim_nos1.tdd.20MHz.TM2</tags>
467 468 469 470 471 472 473 474
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010204">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) without abstraction mode, send ping from from eNB to UE, and check that there is no packet losses</desc>
475
       <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
476
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
477
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
478
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
479
      <pre_exec_args></pre_exec_args>
480
      <test_config_file></test_config_file>
481
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
482 483 484 485 486 487
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26</main_exec_args>
488
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
489 490 491 492 493 494 495 496
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010205">
      <class>execution</class>
      <desc>Run OAI Rel10 TDD, 1 eNB + 1 UE (5 MHz) in PHY_ABSTRACTION  mode, send ping from from eNB to  UE, and check that there is no packet losses</desc>
497
      <pre_compile_prog>cp -vf $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.generic.oaisim.local_no_mme.conf $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf </pre_compile_prog>
498
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
499
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
500
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
501
      <pre_exec_args></pre_exec_args>
502
      <test_config_file></test_config_file>
503
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
504 505 506 507 508 509
      <main_exec_args> -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26 -a
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26  -a
                       -O $OPENAIR_LOGDIR/enb.band38.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26 -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -c26  -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -c26 -a
                      -O $OPENAIR_LOGDIR/enb.band38.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -c26  -a</main_exec_args>
510
      <tags>oaisim_noS1.tdd.5MHz.TM1 oaisim_noS1.tdd.10MHz.TM1 oaisim_noS1.tdd.20MHz.TM1 oaisim_noS1.tdd.5MHz.TM2 oaisim_noS1.tdd.10MHz.TM2 oaisim_noS1.tdd.20MHz.TM2 </tags>
511 512 513 514 515 516 517
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010300">
      <class>execution</class>
518
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE 1 eNB (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
519
      <pre_compile_prog></pre_compile_prog>
520
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
521
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
522
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
523
      <pre_exec_args></pre_exec_args>
524
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
525 526 527 528 529 530
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -s15</main_exec_args>
531
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
532 533 534 535 536 537 538
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010301">
      <class>execution</class>
539
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
540
      <pre_compile_prog></pre_compile_prog>
541
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
542
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
543
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
544
      <pre_exec_args></pre_exec_args>
545
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
546 547 548 549 550 551
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -a -s15</main_exec_args>
552
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags> 
553 554 555 556
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>
557

558 559
    <testCase id="010302">
      <class>execution</class>
560
      <desc> Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) and search for errors, segmentation fault or exit</desc>
561
      <pre_compile_prog></pre_compile_prog>
562
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
563
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
564
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
565
      <pre_exec_args></pre_exec_args>
566
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
567 568 569 570 571 572
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -s15</main_exec_args>
573
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags> 
574 575 576 577 578 579 580
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010303">
      <class>execution</class>
581
      <desc>Run OAISIM Rel10 FDD, 1 eNB + 3 UEs (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION mode and search for errors</desc>
582
      <pre_compile_prog></pre_compile_prog>
583
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
584
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
585
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
586
      <pre_exec_args></pre_exec_args>
587
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
588 589 590 591 592 593
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -a -s15
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 25 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 50 -F -a -s15
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u3 -n100 -R 100 -F -a -s15</main_exec_args>
594
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
595 596 597 598 599 600 601
      <search_expr_true>"Received RRCConnectionReconfigurationComplete from UE 0" "Received RRCConnectionReconfigurationComplete from UE 1" "Received RRCConnectionReconfigurationComplete from UE 2"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010304">
      <class>execution</class>
602
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) without PHY_ABSTRACTION mode, ping from from eNB to UE, and for check for no packet losses</desc>
603
      <pre_compile_prog></pre_compile_prog>
604
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
605
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
606
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
607
      <pre_exec_args></pre_exec_args>
608
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
609 610 611 612 613 614
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26</main_exec_args>
615
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2</tags>
616 617 618 619 620 621 622
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010305">
      <class>execution</class>
623
      <desc>Run OAI Rel10 FDD, 1 eNB + 1 UE (5 MHz/10MHz/20MHz), (TM 1,2) in PHY_ABSTRACTION  mode, send ping from from eNB to UE, and check for no packet losses</desc>
624
      <pre_compile_prog></pre_compile_prog>
625
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
626
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
627
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
628
      <pre_exec_args></pre_exec_args>
629
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
630 631 632 633 634 635
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26 -a
                       -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 25 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 50 -F -c26 -a
                      -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.generic.oaisim.local_no_mme.conf -A AWGN -b1 -u1 -n100 -R 100 -F -c26 -a</main_exec_args>
636
      <tags>oaisim_noS1.FDD.5MHz.TM1 oaisim_noS1.FDD.10MHz.TM1 oaisim_noS1.FDD.20MHz.TM1 oaisim_noS1.FDD.5MHz.TM2 oaisim_noS1.FDD.10MHz.TM2 oaisim_noS1.FDD.20MHz.TM2 </tags>
637 638 639 640 641 642 643 644 645
      <search_expr_true>"DL and UL loss rate below 10"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
      <nruns>3</nruns>
    </testCase>

    <testCase id="010400">
      <class>execution</class>
      <desc>Check if eMBMS procedure is not finished completely, make sure that the SIB13/MCCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
646
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
647
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
648
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
649
      <pre_exec_args></pre_exec_args>
650
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
651
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -Q3 -n 100 -b1 -u1</main_exec_args>
652 653
      <search_expr_true>"Found MBSFNAreaConfiguration from eNB 0"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
654
      <tags>oaisim_noS1.eMBMS</tags>
655 656 657 658 659 660 661
      <nruns>3</nruns>
    </testCase>

    <testCase id="010401">
      <class>execution</class>
      <desc>Check if eMBMS multicast/broadcast data is received, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
662
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
663
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
664
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
665
      <pre_exec_args></pre_exec_args>
666
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
667
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
668 669
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
670
      <tags>oaisim_noS1.eMBMS</tags>
671 672 673 674 675 676 677
      <nruns>3</nruns>
    </testCase>

    <testCase id="010402">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast data received in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
678
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
679
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
680
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
681
      <pre_exec_args></pre_exec_args>
682
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
683
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -F -T mscbr -Q3 -n 100 -b1 -u1</main_exec_args>
684 685
      <search_expr_true>"Received a multicast packet"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
686
      <tags>oaisim_noS1.eMBMS</tags>
687 688 689 690 691 692 693
      <nruns>3</nruns>
    </testCase>

    <testCase id="010403">
      <class>execution</class>
      <desc>Check for eMBMS multicast/broadcast DF relaying working properly in fdd mode, make sure that the SIB13/MCCH/MTCH have been correclty received by UEs</desc>
      <pre_compile_prog></pre_compile_prog>
694
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
695
      <compile_prog_args>--oaisim --noS1  -c </compile_prog_args>
696
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; $OPENAIR_DIR/cmake_targets/tools/init_nas_nos1</pre_exec>
697
      <pre_exec_args></pre_exec_args>
698
      <main_exec>$OPENAIR_DIR/cmake_targets/oaisim_noS1_build_oai/build/oaisim_nos1</main_exec>
699
      <main_exec_args> -O $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.generic.oaisim.local_no_mme.conf -A AWGN -l7 -c43 -F -T mbvbr -Q4 -j1 -n120</main_exec_args>
700 701
      <search_expr_true>"MTCH for sync area 1"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
702
      <tags>oaisim_noS1.eMBMS</tags>
703 704 705 706 707 708 709
      <nruns>3</nruns>
    </testCase>

    <testCase id="015000">
      <class>execution</class>
      <desc>test_aes128_cmac_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
710
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
711
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
712
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
713
      <pre_exec_args></pre_exec_args>
714
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_cmac_encrypt</main_exec>
715 716 717
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
718
      <tags>test_aes128_cmac_encrypt</tags>
719 720 721 722 723 724 725
      <nruns>3</nruns>
    </testCase>

    <testCase id="015001">
      <class>execution</class>
      <desc>test_aes128_ctr_decrypt</desc>
      <pre_compile_prog></pre_compile_prog>
726
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
727
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
728
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
729
      <pre_exec_args></pre_exec_args>
730
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_decrypt</main_exec>
731 732 733
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
734
      <tags>test_aes128_ctr_decrypt</tags>
735 736 737 738 739 740 741
      <nruns>3</nruns>
    </testCase>

    <testCase id="015002">
      <class>execution</class>
      <desc>test_aes128_ctr_encrypt</desc>
      <pre_compile_prog></pre_compile_prog>
742
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
743
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
744
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
745
      <pre_exec_args></pre_exec_args>
746
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_aes128_ctr_encrypt</main_exec>
747 748 749
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
750
      <tags>test_aes128_ctr_encrypt</tags>
751 752 753 754 755 756 757
      <nruns>3</nruns>
    </testCase>

    <testCase id="015003">
      <class>execution</class>
      <desc>test_secu_kenb</desc>
      <pre_compile_prog></pre_compile_prog>
758
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
759
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
760
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
761
      <pre_exec_args></pre_exec_args>
762
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_kenb</main_exec>
763 764 765
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
766
      <tags>test_secu_kenb</tags>
767 768 769 770 771 772 773
      <nruns>3</nruns>
    </testCase>

    <testCase id="015004">
      <class>execution</class>
      <desc>test_secu_knas</desc>
      <pre_compile_prog></pre_compile_prog>
774
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
775
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
776
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
777
      <pre_exec_args></pre_exec_args>
778
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas</main_exec>
779 780 781
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
782
      <tags>test_secu_knas</tags>
783 784 785 786 787 788 789
      <nruns>3</nruns>
    </testCase>

    <testCase id="015005">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea1</desc>
      <pre_compile_prog></pre_compile_prog>
790
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
791
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
792
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
793
      <pre_exec_args></pre_exec_args>
794
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea1</main_exec>
795 796 797
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
798
      <tags>test_secu_knas_encrypt_eea1</tags>
799 800 801 802 803 804 805
      <nruns>3</nruns>
    </testCase>

    <testCase id="015006">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eea2</desc>
      <pre_compile_prog></pre_compile_prog>
806
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
807
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
808
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
809
      <pre_exec_args></pre_exec_args>
810
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eea2</main_exec>
811 812 813
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
814
      <tags>test_secu_knas_encrypt_eea2</tags>
815 816 817 818 819 820 821
      <nruns>3</nruns>
    </testCase>

   <testCase id="015007">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia1</desc>
      <pre_compile_prog></pre_compile_prog>
822
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
823
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
824
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
825
      <pre_exec_args></pre_exec_args>
826
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
827 828 829
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
830
      <tags>test_secu_knas_encrypt_eia1</tags>
831 832 833 834 835 836 837
      <nruns>3</nruns>
    </testCase>

   <testCase id="015008">
      <class>execution</class>
      <desc>test_secu_knas_encrypt_eia2</desc>
      <pre_compile_prog></pre_compile_prog>
838
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
839
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
840
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
841
      <pre_exec_args></pre_exec_args>
842
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_secu_knas_encrypt_eia1</main_exec>
843 844 845
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
846
      <tags>test_secu_knas_encrypt_eia2</tags>
847 848 849 850 851 852 853
      <nruns>3</nruns>
    </testCase>

   <testCase id="015009">
      <class>execution</class>
      <desc>test_kdf</desc>
      <pre_compile_prog></pre_compile_prog>
854
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
855
      <compile_prog_args> --core_simulators  -c </compile_prog_args>
856
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
857
      <pre_exec_args></pre_exec_args>
858
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/test_kdf</main_exec>
859 860 861
      <main_exec_args> --verbose</main_exec_args>
      <search_expr_true>"finished with 0 errors"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
862
      <tags>test_kdf</tags>
863 864 865 866 867 868 869 870 871 872 873 874 875 876
      <nruns>3</nruns>
    </testCase>

    <testCase id="015100">
      <class>execution</class>
      <desc>dlsim test cases (Test 1: 10 MHz, R2.FDD (MCS 5), EVA5, -1dB), 
      (Test 5: 1.4 MHz, R4.FDD (MCS 4), EVA5, 0dB (70%)),
      (Test 6, 10 MHz, R3.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 6b, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (70%)),
      (Test 7, 5 MHz, R3-1.FDD (MCS 15), EVA5, 6.7dB (30%)),
      (Test 7b, 5 MHz, R3-1.FDD (MCS 15), ETU70, 1.4 dB (30%)),
      (Test 10, 5 MHz, R6.FDD (MCS 25), EVA5, 17.4 dB (70%)),
      (Test 10b, 5 MHz, R6-1.FDD (MCS 24,18 PRB), EVA5, 17.5dB (70%)),
      (Test 11, 10 MHz, R7.FDD (MCS 25), EVA5, 17.7dB (70%))
877 878
      (TM2 Test 1 10 MHz, R.11 FDD (MCS 14), EVA5, 6.8 dB (70%)),
      (TM2 Test 1b 20 MHz, R.11-2 FDD (MCS 13), EVA5, 5.9 dB (70%)),
879 880
       </desc>
      <pre_compile_prog></pre_compile_prog>
881
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
882
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
883
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
884
      <pre_exec_args></pre_exec_args>
885
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/dlsim</main_exec>
886 887 888 889 890 891 892 893
      <main_exec_args> -m5 -gF -s-1 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
                       -m4 -gF -s0 -w1.0 -f.2 -n500 -B6 -c4 -z2 -O70
                       -m15 -gF -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
                       -m14 -gF -s6.7 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
                       -m15 -gG -s6.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O30 -L
                       -m14 -gG -s1.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O30 -L
                       -m25 -gF -s17.4 -w1.0 -f.2 -n500 -B25 -c3 -z2 -O70 -L
                       -m25 -gF -s17.5 -w1.0 -f.2 -n500 -B25 -c3 -z2 -r1022 -O70 -L
894 895 896
                       -m26 -gF -s17.7 -w1.0 -f.2 -n500 -B50 -c2 -z2 -O70 -L
		       -m14 -gF -s6.8  -w1.0 -f.2 -n500 -B50 -c2 -x2 -y2 -z2 -O70 -L
                       -m13 -gF -s5.9  -w1.0 -f.2 -n500 -B25 -c3 -x2 -y2 -z2 -O70 -L</main_exec_args>
897
      <tags>dlsim.test1 dlsim.test5 dlsim.test6 dlsim.test6b dlsim.test7 dlsim.test7b dlsim.test10 dlsim.test10b dlsim.test11 dlsim.TM2_test1 dlsim.TM2_test1b</tags>
898 899
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
900
      <nruns>3</nruns>
901 902 903 904 905 906 907 908 909 910 911
    </testCase>

    <testCase id="015101">
      <class>execution</class>
      <desc>ulsim Test cases. (Test 1, 5 MHz, FDD (MCS 5), AWGN, 6dB), 
             (Test 2, 5 MHz, FDD (MCS 16), AWGN , 12dB (70%)),
             (Test 3, 10 MHz, R3.FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 4, 10 MHz, R3-1.FDD (MCS 16), AWGN, 12dB (70%)),
             (Test 5, 20 MHz, FDD (MCS 5), AWGN, 6dB (70%)),
             (Test 6, 20 MHz, FDD (MCS 16), AWGN, 12 dB (70%))</desc>
      <pre_compile_prog></pre_compile_prog>
912
      <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
913
      <compile_prog_args> --phy_simulators  -c </compile_prog_args>
914
      <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
915
      <pre_exec_args></pre_exec_args>
916
      <main_exec>$OPENAIR_DIR/cmake_targets/lte-simulators/build/ulsim</main_exec>
917 918 919 920 921 922
      <main_exec_args> -B25 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
                       -B25 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
                        -B50 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L 
                       -B50 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L
                        -B100 -m5 -y1 -gN -x1 -s6 -w1.0 -e.1 -P -n500 -O70 -L
                       -B100 -m16 -y1 -gN -x1 -s12 -w1.0 -e.1 -P -n500 -O70 -L</main_exec_args>
923
     <tags>ulsim.test1 ulsim.test2 ulsim.test3 ulsim.test4 ulsim.test5 ulsim.test6</tags>
924 925
      <search_expr_true>"passed"</search_expr_true>
      <search_expr_false>segmentation fault|assertion|exiting|fatal</search_expr_false>
926
      <nruns>3</nruns>
927 928
    </testCase>

929 930 931
  <testCase id="015500" >
    <class>lte-softmodem</class>
    <desc></desc>
932
    <eNB>hutch</eNB>
933
    <UE>stevens</UE>
934
    <EPC>amerique</EPC>
935
    <TimeOut_cmd>390</TimeOut_cmd>
936
    <eNB_working_dir>/tmp</eNB_working_dir>
937 938 939 940 941 942 943 944 945 946 947 948
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
949 950 951 952
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
953
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
954
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
955
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
956
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
957
    <eNB_pre_exec_args></eNB_pre_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
958
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
Rohit Gupta's avatar
Rohit Gupta committed
959
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
960
    <eNB_traffic_exec></eNB_traffic_exec>
961
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
962 963
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
964
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
965 966

    <UE_working_dir>/tmp</UE_working_dir>
967 968 969
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
970
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
971
    <UE_pre_exec_args></UE_pre_exec_args>
972
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
973
    <UE_main_exec_args></UE_main_exec_args>
974
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 7Mbits/s    -B 192.172.0.2</UE_traffic_exec>
975
    <UE_traffic_exec_args></UE_traffic_exec_args>
976 977
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
978
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
979
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
980 981

    <EPC_working_dir>/tmp</EPC_working_dir>
982 983 984 985 986
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
987

988
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
989
    <EPC_pre_exec_args></EPC_pre_exec_args>
990
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
991
    <EPC_main_exec_args></EPC_main_exec_args>
992
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
993
    <HSS_main_exec_args></HSS_main_exec_args>
994
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
995
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
996
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
997
    <EPC_search_expr_false></EPC_search_expr_false>
998
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
999
    <tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
1000
    <nruns>10</nruns>
1001 1002
    </testCase> 

1003

Rohit Gupta's avatar
Rohit Gupta committed
1004 1005 1006
  <testCase id="015501" >
    <class>lte-softmodem</class>
    <desc></desc>
1007
    <eNB>hutch</eNB>
Rohit Gupta's avatar
Rohit Gupta committed
1008 1009
    <UE>stevens</UE>
    <EPC>amerique</EPC>
1010
    <TimeOut_cmd>390</TimeOut_cmd>
Rohit Gupta's avatar
Rohit Gupta committed
1011
    <eNB_working_dir>/tmp</eNB_working_dir>
1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 50
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
1024 1025 1026 1027
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
1028
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
Rohit Gupta's avatar
Rohit Gupta committed
1029 1030
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
1031
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1032
    <eNB_pre_exec_args></eNB_pre_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1033
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1034
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1035 1036 1037 1038
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
1039
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
Rohit Gupta's avatar
Rohit Gupta committed
1040 1041

    <UE_working_dir>/tmp</UE_working_dir>
1042 1043 1044
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
1045
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1046
    <UE_pre_exec_args></UE_pre_exec_args>
1047
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1048
    <UE_main_exec_args></UE_main_exec_args>
1049
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 14Mbits/s    -B 192.172.0.2</UE_traffic_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1050 1051 1052
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
1053
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
1054
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
Rohit Gupta's avatar
Rohit Gupta committed
1055 1056

    <EPC_working_dir>/tmp</EPC_working_dir>
1057 1058 1059 1060 1061
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
Rohit Gupta's avatar
Rohit Gupta committed
1062

1063
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1064 1065 1066 1067 1068
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
1069
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1070
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1071
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
Rohit Gupta's avatar
Rohit Gupta committed
1072
    <EPC_search_expr_false></EPC_search_expr_false>
1073
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
1074
    <tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
1075
    <nruns>10</nruns>
Rohit Gupta's avatar
Rohit Gupta committed
1076 1077 1078 1079 1080
    </testCase> 

  <testCase id="015502" >
    <class>lte-softmodem</class>
    <desc></desc>
1081
    <eNB>hutch</eNB>
Rohit Gupta's avatar
Rohit Gupta committed
1082 1083
    <UE>stevens</UE>
    <EPC>amerique</EPC>
1084
    <TimeOut_cmd>390</TimeOut_cmd>
Rohit Gupta's avatar
Rohit Gupta committed
1085
    <eNB_working_dir>/tmp</eNB_working_dir>
1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 100
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
1098 1099 1100 1101
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
1102
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
Rohit Gupta's avatar
Rohit Gupta committed
1103 1104
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
1105
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1106
    <eNB_pre_exec_args></eNB_pre_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1107
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
1108
    <eNB_main_exec_args> -E -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1109 1110 1111 1112
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
1113
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
Rohit Gupta's avatar
Rohit Gupta committed
1114 1115

    <UE_working_dir>/tmp</UE_working_dir>
1116 1117 1118
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>
1119
    <UE_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</UE_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1120
    <UE_pre_exec_args></UE_pre_exec_args>
1121
    <UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1122
    <UE_main_exec_args></UE_main_exec_args>
1123
    <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c  192.172.0.1 -b 10Mbits/s    -B 192.172.0.2</UE_traffic_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1124 1125 1126
    <UE_traffic_exec_args></UE_traffic_exec_args>
    <UE_search_expr_true></UE_search_expr_true>
    <UE_search_expr_false></UE_search_expr_false>
1127
    <UE_terminate_missing_procs>False</UE_terminate_missing_procs>
1128
    <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
Rohit Gupta's avatar
Rohit Gupta committed
1129 1130

    <EPC_working_dir>/tmp</EPC_working_dir>
1131 1132 1133 1134 1135
    <EPC_config_file></EPC_config_file>
    <EPC_compile_prog></EPC_compile_prog>
    <EPC_compile_prog_args></EPC_compile_prog_args>
    <HSS_compile_prog></HSS_compile_prog>
    <HSS_compile_prog_args></HSS_compile_prog_args>
Rohit Gupta's avatar
Rohit Gupta committed
1136

1137
    <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</EPC_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1138 1139 1140 1141 1142
    <EPC_pre_exec_args></EPC_pre_exec_args>
    <EPC_main_exec>/opt/ltebox/tools/stop_ltebox ; /opt/ltebox/tools/start_ltebox ; sleep 3000</EPC_main_exec>
    <EPC_main_exec_args></EPC_main_exec_args>
    <HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
    <HSS_main_exec_args></HSS_main_exec_args>
1143
    <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1144
    <EPC_traffic_exec_args></EPC_traffic_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1145
    <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec   </EPC_search_expr_true>
Rohit Gupta's avatar
Rohit Gupta committed
1146
    <EPC_search_expr_false></EPC_search_expr_false>
1147
    <EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
1148
    <tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.UDP.Band_7.UL.1TX.1RX</tags>
1149
    <nruns>10</nruns>
Rohit Gupta's avatar
Rohit Gupta committed
1150 1151 1152 1153 1154
    </testCase> 

  <testCase id="015503" >
    <class>lte-softmodem</class>
    <desc></desc>
1155
    <eNB>hutch</eNB>
Rohit Gupta's avatar
Rohit Gupta committed
1156 1157
    <UE>stevens</UE>
    <EPC>amerique</EPC>
1158
    <TimeOut_cmd>390</TimeOut_cmd>
Rohit Gupta's avatar
Rohit Gupta committed
1159
    <eNB_working_dir>/tmp</eNB_working_dir>
1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171
    <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tracking_area_code \"1\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_country_code \"208\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mobile_network_code \"92\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  N_RB_DL 25
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  downlink_frequency 2660000000L
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  uplink_frequency_offset -120000000
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  tx_gain 90
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  rx_gain 125
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  frame_type \"FDD\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_rx  1
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  nb_antennas_tx 1
1172 1173 1174 1175
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1_MME       \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1_MME          \"192.168.12.19/24\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_INTERFACE_NAME_FOR_S1U          \"eth0\"
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_IPV4_ADDRESS_FOR_S1U           \"192.168.12.19/24\"
1176
                     targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf  ENB_PORT_FOR_S1U                     2152</eNB_config_file>
Rohit Gupta's avatar
Rohit Gupta committed
1177 1178
    <eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
    <eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
1179
    <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1180
    <eNB_pre_exec_args></eNB_pre_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1181
    <eNB_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/run_gdb $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
Rohit Gupta's avatar
Rohit Gupta committed
1182
    <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf    </eNB_main_exec_args>
Rohit Gupta's avatar
Rohit Gupta committed
1183 1184 1185 1186
    <eNB_traffic_exec></eNB_traffic_exec>
    <eNB_traffic_exec_args></eNB_traffic_exec_args>
    <eNB_search_expr_true></eNB_search_expr_true>
    <eNB_search_expr_false></eNB_search_expr_false>
1187
    <eNB_terminate_missing_procs>False</eNB_terminate_missing_procs>
Rohit Gupta's avatar
Rohit Gupta committed
1188 1189

    <UE_working_dir>/tmp</UE_working_dir>
1190 1191 1192
    <UE_config_file></UE_config_file>
    <UE_compile_prog></UE_compile_prog>
    <UE_compile_prog_args></UE_compile_prog_args>