Commit 039d0175 authored by Rohit Gupta's avatar Rohit Gupta

Merge branch 'enhancement-10-harmony-lts' into develop

parents 256948d6 e084e583
......@@ -181,7 +181,6 @@ set(GIT_BRANCH "UNKNOWN")
set(GIT_COMMIT_HASH "UNKNOWN")
set(GIT_COMMIT_DATE "UNKNOWN")
find_package(Git)
if(GIT_FOUND)
message("git found: ${GIT_EXECUTABLE}")
......@@ -875,7 +874,7 @@ set(UTIL_SRC
${OPENAIR2_DIR}/UTIL/OMG/job.c
${OPENAIR2_DIR}/UTIL/OMG/mobility_parser.c
${OPENAIR2_DIR}/UTIL/OMG/omg.c
${OPENAIR2_DIR}/UTIL/OMG/omg_hashtable.c
#${OPENAIR2_DIR}/UTIL/OMG/omg_hashtable.c
${OPENAIR2_DIR}/UTIL/OMG/rwalk.c
${OPENAIR2_DIR}/UTIL/OMG/rwp.c
${OPENAIR2_DIR}/UTIL/OMG/static.c
......@@ -1532,11 +1531,25 @@ endif()
pkg_search_module(NETTLE nettle)
if(NOT ${NETTLE_FOUND})
message("PACKAGE nettle not found: some targets will fail")
message( FATAL_ERROR "PACKAGE nettle not found: some targets will fail. Run build_oai -I again!")
else()
include_directories(${NETTLE_INCLUDE_DIRS})
endif()
message ("NETTLE VERSION_INSTALLED = ${NETTLE_VERSION}")
string(REGEX REPLACE "([0-9]+).*" "\\1" NETTLE_VERSION_MAJOR ${NETTLE_VERSION})
string(REGEX REPLACE "[0-9]+\\.([0-9]+).*" "\\1" NETTLE_VERSION_MINOR ${NETTLE_VERSION})
message ("NETTLE_VERSION_MAJOR = ${NETTLE_VERSION_MAJOR}")
message ("NETTLE_VERSION_MINOR = ${NETTLE_VERSION_MINOR}")
if ("${NETTLE_VERSION_MAJOR}" STREQUAL "" OR "${NETTLE_VERSION_MINOR}" STREQUAL "")
message( FATAL_ERROR "The nettle version not detected properly. Try to run build_oai -I again" )
endif()
add_definitions("-DNETTLE_VERSION_MAJOR=${NETTLE_VERSION_MAJOR}")
add_definitions("-DNETTLE_VERSION_MINOR=${NETTLE_VERSION_MINOR}")
pkg_search_module(XPM xpm)
if(NOT ${XPM_FOUND})
message("PACKAGE xpm not found: some targets will fail")
......
......@@ -88,6 +88,24 @@ set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -msse4.2 -std=gnu99 -Wall -Wstrict-prototype
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -ggdb -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} -ggdb -DMALLOC_CHECK_=3 -O2")
#This is to detect nettle version changes between Ubuntu 14.04/16.04
set ( nettle_cmd "nettle-hash" )
set ( nettle_arg "-V" )
execute_process(COMMAND ${nettle_cmd} ${nettle_arg} RESULT_VARIABLE rv OUTPUT_VARIABLE ov ERROR_VARIABLE ev)
string(REGEX MATCH "[+-]?[0-9]+([.][0-9]+)?" nv ${ov})
message("NETTLE_VERSION = ${nv}")
# we need to remove decimal as floating point arithematic does not work properly with C preprocessor
STRING(REGEX REPLACE "[.]" "" nv ${nv})
if ("${nv}" STREQUAL "")
message( FATAL_ERROR "The nettle version not detected properly. Try to run build_oai -I again" )
endif()
set (NETTLE_VERSION "${nv}")
add_definitions("-DNETTLE_VERSION=${NETTLE_VERSION}")
include(FindPkgConfig)
......
OAI Test PLAN
#UNDER CONSTRUCTION. Not correct at the moment
Obj.# Case# Test# Description
......
......@@ -7,7 +7,7 @@
<GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
<GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
<GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
<CleanUpOldProgs>oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim configure_cots* wvdial iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone pppd starthss start_ltebox stop_ltebox configure_cots_sony_experia_m4_ue configure_cots_huaweiE398_ue configure_cots_bandrich_ue</CleanUpOldProgs>
<CleanUpOldProgs>oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim wvdial iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone pppd starthss start_ltebox stop_ltebox configure_cots_sony_experia_m4_ue configure_cots_huaweiE398_ue configure_cots_bandrich_ue</CleanUpOldProgs>
<CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
<ExmimoRfStop>exmimo_pci=`lspci -m | grep Xilinx`; if [ -n "$exmimo_pci" ] ; then $OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; fi; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg</ExmimoRfStop>
<Timeout_execution>36000</Timeout_execution>
......
......@@ -552,6 +552,7 @@ function main() {
compilations \
$lte_build_dir updatefw \
updatefw $dbin/updatefw
echo_info "Compiling oarf tools. The logfile for compilation is here: $dlog/oarf.txt"
make -C $OPENAIR_DIR/cmake_targets/$lte_build_dir/build oarf > $dlog/oarf.txt 2>&1
cp $OPENAIR_DIR/cmake_targets/$lte_build_dir/build/*.oct $dbin
if [ -s $dbin/oarf_config_exmimo.oct ] ; then
......
......@@ -163,57 +163,6 @@ compilations() {
# External packages installers
############################################
install_nettle_from_source() {
nettle_install_log=$OPENAIR_DIR/cmake_targets/log/nettle_install_log.txt
echo_info "\nInstalling Nettle. The log file for nettle installation is here: $nettle_install_log "
(
cd /tmp
echo "Downloading nettle archive"
$SUDO rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5
wget http://ftp.nluug.nl/gnu/nettle/nettle-2.5.tar.gz
if [ $? -ne 0 ]; then
wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
fi
if [ ! -f nettle-2.5.tar.gz ]; then
echo_error "Could not download nettle source files"
cd -
return
fi
tar -xzf nettle-2.5.tar.gz
cd nettle-2.5/
./configure --disable-openssl --enable-shared --prefix=/usr
echo "Compiling nettle"
make -j`nproc`
make check
$SUDO make install
) >& $nettle_install_log
}
install_gnutls_from_source(){
gnutls_install_log=$OPENAIR_DIR/cmake_targets/log/gnutls_install_log.txt
echo_info "\nInstalling Gnutls. The log file for Gnutls installation is here: $gnutls_install_log "
(
cd /tmp
echo "Downloading gnutls archive"
$SUDO rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23
wget http://mirrors.dotsrc.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz || \
wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
if [ ! -f gnutls-3.1.23.tar.xz ]; then
echo_error "Could not download gnutls source files"
cd -
return
fi
tar -xJf gnutls-3.1.23.tar.xz
cd gnutls-3.1.23/
./configure --prefix=/usr
echo "Compiling gnutls"
make -j`nproc`
$SUDO make install
)>& $gnutls_install_log
}
check_install_usrp_uhd_driver(){
#first we remove old installation
$SUDO apt-get remove -y uhd || true
......@@ -377,22 +326,71 @@ check_install_oai_software() {
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
#Sometimes linux headers are not available in apt-get if kernel is custom or new
$SUDO apt-get install linux-headers-`uname -r` || true
# First we remove gnutls/nettle installation and then install from sources
$SUDO apt-get remove -y libgnutls-dev nettle-dev nettle-bin
install_nettle_from_source
install_gnutls_from_source
#Remove old gnutls/nettle installation that was done from sources
remove_nettle_from_source
$SUDO apt-get install -y nettle-dev nettle-bin
remove_gnutls_from_source
$SUDO apt-get install -y libgnutls-dev
install_asn1c_from_source
}
### Remove Nettle installation which was done from sources
remove_nettle_from_source() {
nettle_uninstall_log=$OPENAIR_DIR/cmake_targets/log/nettle_uninstall_log.txt
echo_info "\nUn-Installing Nettle from sources. The log file for nettle un-installation is here: $nettle_uninstall_log "
(
$SUDO apt-get remove -y nettle-dev nettle-bin
cd /tmp
echo "Downloading nettle archive"
$SUDO rm -rf /tmp/nettle-2.5.tar.gz* /tmp/nettle-2.5
wget https://ftp.gnu.org/gnu/nettle/nettle-2.5.tar.gz
if [ $? -ne 0 ]; then
wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
fi
if [ ! -f nettle-2.5.tar.gz ]; then
echo_error "Could not download nettle source files"
cd -
return
fi
tar -xzf nettle-2.5.tar.gz
cd nettle-2.5/
./configure --disable-openssl --enable-shared --prefix=/usr
$SUDO make uninstall || true
) >& $nettle_uninstall_log
}
### Remove Gnutls from source
remove_gnutls_from_source(){
gnutls_uninstall_log=$OPENAIR_DIR/cmake_targets/log/gnutls_uninstall_log.txt
echo_info "\nUn-Installing Gnutls. The log file for Gnutls un-installation is here: $gnutls_uninstall_log "
(
$SUDO apt-get remove -y libgnutls-dev
cd /tmp
echo "Downloading gnutls archive"
$SUDO rm -rf /tmp/gnutls-3.1.23.tar.xz* /tmp/gnutls-3.1.23
wget http://mirrors.dotsrc.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz || \
wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
if [ ! -f gnutls-3.1.23.tar.xz ]; then
echo_error "Could not download gnutls source files"
cd -
return
fi
tar -xJf gnutls-3.1.23.tar.xz
cd gnutls-3.1.23/
./configure --prefix=/usr
$SUDO make uninstall || true
)>& $gnutls_uninstall_log
}
install_asn1c_from_source(){
asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
(
$SUDO rm -rf /tmp/asn1c
git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
cd /tmp/asn1c
./configure
make -j`nproc`
......
......@@ -64,15 +64,7 @@ if [ ! -e /dev/openair0 ]; then
sudo chmod a+rw /dev/openair0
fi
DEVICE=`echo $PCI | awk -F\" '{print $(NF-1)}' | awk '{print $2}'`
DEVICE_SWID=${DEVICE:2:2}
if [ $DEVICE_SWID == '0a' ]; then
echo "Using firware version 10"
$OPENAIR_DIR/targets/bin/updatefw -s 0x43fffff0 -b -f $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT/sdr_expressmimo2_v10
else
echo 'No corresponding firmware found'
return
fi
}
main "$@"
......@@ -51,7 +51,7 @@ do { \
"In %s() %s:%d\n" fORMAT, \
__FUNCTION__, __FILE__, __LINE__, ##aRGS); \
aCTION; \
} \
} \
} while(0)
#define AssertFatal(cOND, fORMAT, aRGS...) _Assert_(cOND, _Assert_Exit_, fORMAT, ##aRGS)
......
......@@ -37,7 +37,8 @@ void display_backtrace(void)
size_t size;
char **strings;
size_t i;
char* test=getenv("NO_BACKTRACE");
if (test!=0) *((int*)0)=0;
size = backtrace(array, 10);
strings = backtrace_symbols(array, size);
......
......@@ -45,6 +45,11 @@
# define msg mexPrintf
#else
# ifdef OPENAIR2
# if ENABLE_RAL
# include "collection/hashtable/hashtable.h"
# include "COMMON/ral_messages_types.h"
# include "UTIL/queue.h"
# endif
# include "log.h"
# define msg(aRGS...) LOG_D(PHY, ##aRGS)
# else
......@@ -119,6 +124,8 @@ static inline void* malloc16_clear( size_t size )
#include "PHY/TOOLS/defs.h"
#include "platform_types.h"
#ifdef OPENAIR_LTE
#include "PHY/LTE_TRANSPORT/defs.h"
#include <pthread.h>
......@@ -130,6 +137,9 @@ static inline void* malloc16_clear( size_t size )
#define NB_BANDS_MAX 8
#ifdef OCP_FRAMEWORK
#include <enums.h>
#else
typedef enum {normal_txrx=0,rx_calib_ue=1,rx_calib_ue_med=2,rx_calib_ue_byp=3,debug_prach=4,no_L2_connect=5,calib_prach_tx=6,rx_dump_frame=7,loop_through_memory=8} runmode_t;
enum transmission_access_mode {
......@@ -153,6 +163,7 @@ typedef enum {
synch_to_ext_device=0, // synch to RF or Ethernet device
synch_to_other // synch to another source (timer, other CC_id)
} eNB_timing_t;
#endif
typedef struct UE_SCAN_INFO_s {
/// 10 best amplitudes (linear) for each pss signals
......@@ -939,5 +950,5 @@ static inline int release_thread(pthread_mutex_t *mutex,int *instance_cnt,char *
#include "PHY/LTE_ESTIMATION/defs.h"
#include "SIMULATION/ETH_TRANSPORT/defs.h"
#endif
#endif // __PHY_DEFS__H__
......@@ -40,11 +40,17 @@ extern int number_of_cards;
//extern PHY_CONFIG *PHY_config;
//extern PHY_VARS *PHY_vars;
#ifndef OCP_FRAMEWORK
extern PHY_VARS_UE ***PHY_vars_UE_g;
extern PHY_VARS_eNB ***PHY_vars_eNB_g;
extern PHY_VARS_RN **PHY_vars_RN_g;
extern LTE_DL_FRAME_PARMS *lte_frame_parms_g;
#else
#define MAX_UE 10
#define MAX_eNB 20
extern PHY_VARS_UE * PHY_vars_UE_g[MAX_UE][MAX_NUM_CCs];
extern PHY_VARS_eNB * PHY_vars_eNB_g[MAX_eNB][MAX_NUM_CCs];
#endif
extern MAC_xface *mac_xface;
......
......@@ -54,7 +54,9 @@
#define MAX_MBSFN_AREA 8
#ifdef OCP_FRAMEWORK
#include "enums.h"
#else
typedef enum {TDD=1,FDD=0} lte_frame_type_t;
typedef enum {EXTENDED=1,NORMAL=0} lte_prefix_type_t;
......@@ -74,7 +76,7 @@ typedef enum {
one=6,
two=12
} PHICH_RESOURCE_t;
#endif
/// PHICH-Config from 36.331 RRC spec
typedef struct {
/// Parameter: PHICH-Duration, see TS 36.211 (Table 6.9.3-1).
......@@ -161,10 +163,12 @@ typedef struct {
} UL_REFERENCE_SIGNALS_PUSCH_t;
/// Enumeration for parameter Hopping-mode \ref PUSCH_CONFIG_COMMON::hoppingMode.
#ifndef OCP_FRAMEWORK
typedef enum {
interSubFrame=0,
intraAndInterSubFrame=1
} PUSCH_HOPPING_t;
#endif
/// PUSCH-ConfigCommon from 36.331 RRC spec.
typedef struct {
......@@ -329,6 +333,7 @@ typedef struct {
uint8_t filterCoefficient;
} UL_POWER_CONTROL_DEDICATED;
#ifndef OCP_FRAMEWORK
/// Enumeration for parameter \f$\alpha\f$ \ref UL_POWER_CONTROL_CONFIG_COMMON::alpha.
typedef enum {
al0=0,
......@@ -340,6 +345,7 @@ typedef enum {
al09=6,
al1=7
} PUSCH_alpha_t;
#endif
/// \note UNUSED
typedef enum {
......
......@@ -45,10 +45,15 @@ int16_t *primary_synch2_time;
#include "PHY/CODING/vars.h"
//PHY_VARS *PHY_vars;
#ifndef OCP_FRAMEWORK
PHY_VARS_UE ***PHY_vars_UE_g;
PHY_VARS_eNB ***PHY_vars_eNB_g;
PHY_VARS_RN **PHY_vars_RN_g;
LTE_DL_FRAME_PARMS *lte_frame_parms_g;
#else
PHY_VARS_UE * PHY_vars_UE_g[MAX_UE][MAX_NUM_CCs]={NULL};
PHY_VARS_eNB * PHY_vars_eNB_g[MAX_eNB][MAX_NUM_CCs]={NULL};
#endif
unsigned short rev[2048],rev_times4[8192],rev_half[1024];
......@@ -132,8 +137,12 @@ double beta2_dlsch[6][MCS_COUNT] = { {2.52163, 0.83231, 0.77472, 1.36536, 1.1682
*/
#ifdef OCP_FRAMEWORK
#include <enums.h>
#else
char eNB_functions[6][20]={"eNodeB_3GPP","eNodeB_3GPP_BBU","NGFI_RCC_IF4p5","NGFI_RAI_IF4p5","NGFI_RRU_IF5","NGFI_RRU_IF4p5",};
char eNB_timing[2][20]={"synch_to_ext_device","synch_to_other"};
#endif
/// lookup table for unscrambling in RX
int16_t unscrambling_lut[65536*16] __attribute__((aligned(32)));
......
......@@ -71,7 +71,7 @@
* the key length is 32 bytes (256 bits)
*/
#define SECURITY_KEY_LENGTH 32
#ifndef OCP_FRAMEWORK
typedef enum cell_type_e {
CELL_MACRO_ENB,
CELL_HOME_ENB
......@@ -102,6 +102,7 @@ typedef enum cn_domain_s {
CN_DOMAIN_PS = 1,
CN_DOMAIN_CS = 2
} cn_domain_t;
#endif
typedef struct net_ip_address_s {
unsigned ipv4:1;
......@@ -117,6 +118,7 @@ typedef struct ambr_s {
bitrate_t br_dl;
} ambr_t;
#ifndef OCP_FRAMEWORK
typedef enum priority_level_s {
PRIORITY_LEVEL_SPARE = 0,
PRIORITY_LEVEL_HIGHEST = 1,
......@@ -135,6 +137,7 @@ typedef enum pre_emp_vulnerability_e {
PRE_EMPTION_VULNERABILITY_DISABLED = 1,
PRE_EMPTION_VULNERABILITY_MAX,
} pre_emp_vulnerability_t;
#endif
typedef struct allocation_retention_priority_s {
priority_level_t priority_level;
......
......@@ -32,6 +32,7 @@
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <libconfig.h>
#include "commonDef.h"
#include "platform_types.h"
......@@ -41,6 +42,7 @@
#include "s1ap_messages_types.h"
#ifdef CMAKER
#include "SystemInformationBlockType2.h"
#include "rrc_messages_types.h"
#else
#include "RRC/LITE/MESSAGES/SystemInformationBlockType2.h"
#endif
......@@ -109,6 +111,7 @@ typedef struct Enb_properties_s {
*/
char *eNB_name;
/* Tracking area code */
uint16_t tac;
......@@ -123,6 +126,7 @@ typedef struct Enb_properties_s {
/* Physical parameters */
int16_t nb_cc;
#ifndef OCP_FRAMEWORK
eNB_func_t cc_node_function[1+MAX_NUM_CCs];
eNB_timing_t cc_node_timing[1+MAX_NUM_CCs];
int16_t cc_node_synch_ref[1+MAX_NUM_CCs];
......@@ -199,8 +203,10 @@ typedef struct Enb_properties_s {
long ue_TimersAndConstants_t311[1+MAX_NUM_CCs];
long ue_TimersAndConstants_n310[1+MAX_NUM_CCs];
long ue_TimersAndConstants_n311[1+MAX_NUM_CCs];
#else
RrcConfigurationReq RrcReq;
#endif
long ue_TransmissionMode[1+MAX_NUM_CCs];
long srb1_timer_poll_retransmit;
long srb1_timer_reordering;
long srb1_timer_status_prohibit;
......@@ -229,6 +235,7 @@ typedef struct Enb_properties_s {
/* List of MME to connect to */
rrh_gw_config_t rrh_gw_config[4];
#ifndef OCP_FRAMEWORK
// otg config
/* Nb of OTG elements */
uint8_t num_otg_elements;
......@@ -257,7 +264,7 @@ typedef struct Enb_properties_s {
int16_t udp_log_verbosity;
int16_t osa_log_level;
int16_t osa_log_verbosity;
#endif
} Enb_properties_t;
typedef struct Enb_properties_array_s {
......
......@@ -3867,6 +3867,12 @@ openair_rrc_eNB_init(
PROTOCOL_RRC_CTXT_FMT" Init...\n",
PROTOCOL_RRC_CTXT_ARGS(&ctxt));
#if OCP_FRAMEWORK
while ( eNB_rrc_inst == NULL ) {
LOG_E(RRC, "eNB_rrc_inst not yet initialized, waiting 1 second\n");
sleep(1);
}
#endif
AssertFatal(eNB_rrc_inst != NULL, "eNB_rrc_inst not initialized!");
AssertFatal(NUMBER_OF_UE_MAX < (module_id_t)0xFFFFFFFFFFFFFFFF, " variable overflow");
......
......@@ -55,12 +55,16 @@ This header file must be included */
#include "PHY/impl_defs_lte.h"
#endif
#ifdef OCP_FRAMEWORK
#include <enums.h>
#else
typedef enum trace_mode_e {
OPT_WIRESHARK,
OPT_PCAP,
OPT_TSHARK,
OPT_NONE
} trace_mode_t;
#endif
typedef enum radio_type_e {
RADIO_TYPE_FDD = 1,
......
......@@ -191,8 +191,13 @@ int stream_encrypt_eea2(stream_cipher_t *stream_cipher, uint8_t **out)
}
#endif
#if NETTLE_VERSION_MAJOR < 3
nettle_aes128.set_encrypt_key(ctx, stream_cipher->key_length,
stream_cipher->key);
#else
nettle_aes128.set_encrypt_key(ctx,
stream_cipher->key);
#endif
nettle_ctr_crypt(ctx, nettle_aes128.encrypt,
nettle_aes128.block_size, m,
......
......@@ -282,8 +282,10 @@
# define X2AP_PORT 36422
#endif
#ifndef TRUE
#define TRUE 1
#define FALSE 0
#endif
extern int asn_debug;
extern int asn1_xer_print;
......
......@@ -78,8 +78,13 @@ int nas_stream_encrypt_eea2(nas_stream_cipher_t *stream_cipher, uint8_t *out)
}
#endif
#if NETTLE_VERSION_MAJOR < 3
nettle_aes128.set_encrypt_key(ctx, stream_cipher->key_length,
stream_cipher->key);
#else
nettle_aes128.set_encrypt_key(ctx,
stream_cipher->key);
#endif
nettle_ctr_crypt(ctx, nettle_aes128.encrypt,
nettle_aes128.block_size, m,
......
......@@ -41,7 +41,12 @@ void test_uncipher_ctr(const struct nettle_cipher *cipher, const uint8_t *key,
uint8_t *data = malloc(length);
uint8_t *ctr = malloc(cipher->block_size);
cipher->set_encrypt_key(ctx, key_length, key);
#if NETTLE_VERSION_MAJOR < 3
cipher->set_encrypt_key(ctx, key_length, key);
#else
cipher->set_encrypt_key(ctx, key);
#endif
memcpy(ctr, ictr, cipher->block_size);
ctr_crypt(ctx, cipher->encrypt,
......
......@@ -40,7 +40,12 @@ static void test_cipher_ctr(const struct nettle_cipher *cipher, const uint8_t *k
uint8_t *data = malloc(length);
uint8_t *ctr = malloc(cipher->block_size);
#if NETTLE_VERSION_MAJOR < 3
cipher->set_encrypt_key(ctx, key_length, key);
#else
cipher->set_encrypt_key(ctx, key);
#endif
memcpy(ctr, ictr, cipher->block_size);
ctr_crypt(ctx, cipher->encrypt,
......
......@@ -65,10 +65,13 @@ typedef enum {
max_gain=0,med_gain,byp_gain
} rx_gain_t;
#if OCP_FRAMEWORK
#include <enums.h>
#else
typedef enum {
duplex_mode_TDD=1,duplex_mode_FDD=0
} duplex_mode_t;
#endif
/** @addtogroup _GENERIC_PHY_RF_INTERFACE_
......@@ -76,6 +79,9 @@ typedef enum {
*/
/*!\brief RF device types
*/
#ifdef OCP_FRAMEWORK
#include <enums.h>
#else
typedef enum {
MIN_RF_DEV_TYPE = 0,
/*!\brief device is ExpressMIMO */
......@@ -93,6 +99,7 @@ typedef enum {
MAX_RF_DEV_TYPE
} dev_type_t;
#endif
/*!\brief transport protocol types
*/
......
......@@ -264,6 +264,7 @@ int trx_eth_read_raw(openair0_device *device, openair0_timestamp *timestamp, voi
if (bytes_received ==-1) {
eth->num_rx_errors++;
perror("ETHERNET IF5 READ: ");
if (errno == EAGAIN) continue;
exit(-1);
} else {
/* store the timestamp value from packet's header */
......
......@@ -37,11 +37,15 @@
#include "PHY/LTE_TRANSPORT/if5_tools.h"
// ETH transport preference modes
#ifdef OCP_FRAMEWORK
#include "enums.h"
#else
#define ETH_UDP_MODE 0
#define ETH_RAW_MODE 1
#define ETH_UDP_IF4p5_MODE 2
#define ETH_RAW_IF4p5_MODE 3
#define ETH_RAW_IF5_MOBIPASS 4
#endif
// Time domain RRH packet sizes
#define MAC_HEADER_SIZE_BYTES (sizeof(struct ether_header))
......
......@@ -151,6 +151,8 @@ static struct {
volatile uint8_t phy_proc_CC_id;
} sync_phy_proc;
extern double cpuf;
void exit_fun(const char* s);
void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst,eth_params_t *,int);
......@@ -182,11 +184,9 @@ static inline void thread_top_init(char *thread_name,
if (sched_setattr(0, &attr, flags) < 0 ) {
perror("[SCHED] eNB tx thread: sched_setattr failed\n");
exit_fun("Error setting deadline scheduler");
exit(1);
}
LOG_I( HW, "[SCHED] eNB %s deadline thread started on CPU %d\n", thread_name,sched_getcpu() );
#else //LOW_LATENCY
int policy, s, j;
struct sched_param sparam;
......@@ -582,6 +582,7 @@ static void* eNB_thread_rxtx( void* param ) {
// set default return value
eNB_thread_rxtx_status = 0;
sprintf(thread_name,"RXn_TXnp4_%d\n",&eNB->proc.proc_rxtx[0] == proc ? 0 : 1);
thread_top_init(thread_name,1,850000L,1000000L,2000000L);
......@@ -786,6 +787,7 @@ static void* eNB_thread_asynch_rxtx( void* param ) {
PHY_VARS_eNB *eNB = PHY_vars_eNB_g[0][proc->CC_id];
int subframe=0, frame=0;
thread_top_init("thread_asynch",1,870000L,1000000L,1000000L);
......@@ -1312,7 +1314,9 @@ void init_eNB_proc(int inst) {
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
eNB = PHY_vars_eNB_g[inst][CC_id];
#ifndef OCP_FRAMEWORK
LOG_I(PHY,"Initializing eNB %d CC_id %d (%s,%s),\n",inst,CC_id,eNB_functions[eNB->node_function],eNB_timing[eNB->node_timing]);
#endif
proc = &eNB->proc;
proc_rxtx = proc->proc_rxtx;
......@@ -1374,6 +1378,8 @@ void init_eNB_proc(int inst) {
if ((eNB->node_timing == synch_to_other) ||
(eNB->node_function == NGFI_RRU_IF5) ||
(eNB->node_function == NGFI_RRU_IF4p5))
pthread_create( &proc->pthread_asynch_rxtx, attr_asynch, eNB_thread_asynch_rxtx, &eNB->proc );
char name[16];
......@@ -1606,7 +1612,9 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
eNB->node_timing = node_timing[CC_id];
eNB->abstraction_flag = 0;
eNB->single_thread_flag = single_thread_flag;
#ifndef OCP_FRAMEWORK
LOG_I(PHY,"Initializing eNB %d CC_id %d : (%s,%s)\n",inst,CC_id,eNB_functions[node_function[CC_id]],eNB_timing[node_timing[CC_id]]);
#endif
switch (node_function[CC_id]) {
case NGFI_RRU_IF5:
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment