Commit 0554132d authored by Florian Kaltenberger's avatar Florian Kaltenberger

Merge branch 'enhancement-64-phy_test' into 'develop'

Enhancement 64 phy test



See merge request !46
parents 9927838e 535755a5
......@@ -1795,11 +1795,19 @@ int main( int argc, char **argv )
// start the main thread
if (UE_flag == 1) init_UE(1);
if (UE_flag == 1) {
init_UE(1);
number_of_cards = 1;
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
PHY_vars_UE_g[0][CC_id]->rf_map.card=0;
PHY_vars_UE_g[0][CC_id]->rf_map.chain=CC_id+chain_offset;
}
}
else {
init_eNB(node_function,node_timing,1,eth_params,single_thread_flag);
// Sleep to allow all threads to setup
// Sleep to allow all threads to setup
number_of_cards = 1;
for(CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
......
......@@ -220,7 +220,7 @@ static void *UE_thread_synch(void *arg)
int current_band = 0;
int current_offset = 0;
sync_mode_t sync_mode = pbch;
int card;
int CC_id = UE->CC_id;
int ind;
int found;
int freq_offset=0;
......@@ -312,9 +312,8 @@ static void *UE_thread_synch(void *arg)
printf( "Scanning band %d, dl_min %"PRIu32", ul_min %"PRIu32"\n", current_band, eutra_bands[ind].dl_min,eutra_bands[ind].ul_min);
if ((eutra_bands[ind].dl_min <= downlink_frequency[0][0]) && (eutra_bands[ind].dl_max >= downlink_frequency[0][0])) {
for (card=0; card<MAX_NUM_CCs; card++)
for (i=0; i<4; i++)
uplink_frequency_offset[card][i] = eutra_bands[ind].ul_min - eutra_bands[ind].dl_min;
for (i=0; i<4; i++)
uplink_frequency_offset[CC_id][i] = eutra_bands[ind].ul_min - eutra_bands[ind].dl_min;
found = 1;
break;
......@@ -333,16 +332,16 @@ static void *UE_thread_synch(void *arg)
LOG_I( PHY, "[SCHED][UE] Check absolute frequency DL %"PRIu32", UL %"PRIu32" (oai_exit %d)\n", downlink_frequency[0][0], downlink_frequency[0][0]+uplink_frequency_offset[0][0],oai_exit );
LOG_I( PHY, "[SCHED][UE] Check absolute frequency DL %"PRIu32", UL %"PRIu32" (oai_exit %d, rx_num_channels %d)\n", downlink_frequency[0][0], downlink_frequency[0][0]+uplink_frequency_offset[0][0],oai_exit, openair0_cfg[0].rx_num_channels);
for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
openair0_cfg[0].rx_freq[i] = downlink_frequency[0][i];
openair0_cfg[0].tx_freq[i] = downlink_frequency[0][i]+uplink_frequency_offset[0][i];
openair0_cfg[0].autocal[i] = 1;
if (uplink_frequency_offset[0][i] != 0) //
openair0_cfg[0].duplex_mode = duplex_mode_FDD;
for (i=0;i<openair0_cfg[UE->rf_map.card].rx_num_channels;i++) {
openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
if (uplink_frequency_offset[CC_id][i] != 0) //
openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_FDD;
else //FDD
openair0_cfg[0].duplex_mode = duplex_mode_TDD;
openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_TDD;
}
sync_mode = pbch;
......@@ -350,18 +349,14 @@ static void *UE_thread_synch(void *arg)
} else if (UE->UE_scan == 1) {
current_band=0;
for (card=0; card<MAX_CARDS; card++) {
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
downlink_frequency[card][i] = bands_to_scan.band_info[0].dl_min;
uplink_frequency_offset[card][i] = bands_to_scan.band_info[0].ul_min-bands_to_scan.band_info[0].dl_min;
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i];
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i];
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB;
printf( "UE synch: setting RX gain (%d,%d) to %f\n", card, i, openair0_cfg[card].rx_gain[i] );
}
for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[CC_id].dl_min;
uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[CC_id].ul_min-bands_to_scan.band_info[CC_id].dl_min;
openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
}
}
......@@ -417,28 +412,19 @@ static void *UE_thread_synch(void *arg)
oai_exit=1;
}
for (card=0; card<MAX_CARDS; card++) {
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
downlink_frequency[card][i] = bands_to_scan.band_info[current_band].dl_min+current_offset;
uplink_frequency_offset[card][i] = bands_to_scan.band_info[current_band].ul_min-bands_to_scan.band_info[0].dl_min + current_offset;
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i];
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i];
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB;
printf("UE synch: setting RX gain (%d,%d) to %f\n",card,i,openair0_cfg[card].rx_gain[i]);
}
}
if (UE->UE_scan_carrier) {
for (i=0;i<openair0_cfg[0].rx_num_channels;i++)
openair0_cfg[0].autocal[i] = 1;
for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].dl_min+current_offset;
uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].ul_min-bands_to_scan.band_info[0].dl_min + current_offset;
openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
if (UE->UE_scan_carrier) {
openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
}
}
break;
case pbch:
......@@ -452,42 +438,42 @@ static void *UE_thread_synch(void *arg)
UE->UE_scan_carrier = 0;
// rerun with new cell parameters and frequency-offset
for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
openair0_cfg[0].rx_gain[i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
openair0_cfg[0].rx_freq[i] -= UE->common_vars.freq_offset;
openair0_cfg[0].tx_freq[i] = openair0_cfg[0].rx_freq[i]+uplink_frequency_offset[0][i];
downlink_frequency[0][i] = openair0_cfg[0].rx_freq[i];
for (i=0;i<openair0_cfg[UE->rf_map.card].rx_num_channels;i++) {
openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] -= UE->common_vars.freq_offset;
openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i]+uplink_frequency_offset[CC_id][i];
downlink_frequency[CC_id][i] = openair0_cfg[CC_id].rx_freq[i];
freq_offset=0;
}
// reconfigure for potentially different bandwidth
switch(UE->frame_parms.N_RB_DL) {
case 6:
openair0_cfg[0].sample_rate =1.92e6;
openair0_cfg[0].rx_bw =.96e6;
openair0_cfg[0].tx_bw =.96e6;
openair0_cfg[UE->rf_map.card].sample_rate =1.92e6;
openair0_cfg[UE->rf_map.card].rx_bw =.96e6;
openair0_cfg[UE->rf_map.card].tx_bw =.96e6;
// openair0_cfg[0].rx_gain[0] -= 12;
break;
case 25:
openair0_cfg[0].sample_rate =7.68e6;
openair0_cfg[0].rx_bw =2.5e6;
openair0_cfg[0].tx_bw =2.5e6;
openair0_cfg[UE->rf_map.card].sample_rate =7.68e6;
openair0_cfg[UE->rf_map.card].rx_bw =2.5e6;
openair0_cfg[UE->rf_map.card].tx_bw =2.5e6;
// openair0_cfg[0].rx_gain[0] -= 6;
break;
case 50:
openair0_cfg[0].sample_rate =15.36e6;
openair0_cfg[0].rx_bw =5.0e6;
openair0_cfg[0].tx_bw =5.0e6;
openair0_cfg[UE->rf_map.card].sample_rate =15.36e6;
openair0_cfg[UE->rf_map.card].rx_bw =5.0e6;
openair0_cfg[UE->rf_map.card].tx_bw =5.0e6;
// openair0_cfg[0].rx_gain[0] -= 3;
break;
case 100:
openair0_cfg[0].sample_rate=30.72e6;
openair0_cfg[0].rx_bw=10.0e6;
openair0_cfg[0].tx_bw=10.0e6;
openair0_cfg[UE->rf_map.card].sample_rate=30.72e6;
openair0_cfg[UE->rf_map.card].rx_bw=10.0e6;
openair0_cfg[UE->rf_map.card].tx_bw=10.0e6;
// openair0_cfg[0].rx_gain[0] -= 0;
break;
}
UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
//UE->rfdevice.trx_set_gains_func(&openair0,&openair0_cfg[0]);
UE->rfdevice.trx_stop_func(&UE->rfdevice);
......@@ -559,25 +545,19 @@ static void *UE_thread_synch(void *arg)
downlink_frequency[0][0]+freq_offset,
downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
for (card=0; card<MAX_CARDS; card++) {
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i]+freq_offset;
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i]+freq_offset;
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
}
}
if (UE->UE_scan_carrier==1) {
for (i=0;i<openair0_cfg[0].rx_num_channels;i++) {
// openair0_cfg[0].autocal[i] = 1;
for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+freq_offset;
openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i]+freq_offset;
openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
if (UE->UE_scan_carrier==1) {
openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
}
}
UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
}// initial_sync=0
break;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment