Commit 09e683a3 authored by knopp's avatar knopp

switching some LOG_I to LOG_D, fixes for RRU IF4p5. It was broken after...

switching some LOG_I to LOG_D, fixes for RRU IF4p5. It was broken after changes in configuration procedures. Some configuration file changes.
parent 2abe4048
......@@ -881,7 +881,7 @@ void fill_dci_and_dlsch(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC_t *dci
dci_alloc->harq_pid = rel8->harq_process;
dci_alloc->ra_flag = 0;
LOG_I(PHY,"NFAPI: DCI format %d, nCCE %d, L %d, rnti %x,harq_pid %d\n",
LOG_D(PHY,"NFAPI: DCI format %d, nCCE %d, L %d, rnti %x,harq_pid %d\n",
rel8->dci_format,rel8->cce_idx,rel8->aggregation_level,rel8->rnti,rel8->harq_process);
if ((rel8->rnti_type == 2 ) && (rel8->rnti != SI_RNTI) && (rel8->rnti != P_RNTI)) dci_alloc->ra_flag = 1;
......@@ -908,7 +908,7 @@ void fill_dci_and_dlsch(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,DCI_ALLOC_t *dci
}
dlsch0_harq->ndi = rel8->new_data_indicator_1;
LOG_I(PHY,"NFAPI: harq_pid %d harq_mask %x, round %d ndi (%d,%d) \n",rel8->harq_process,dlsch0->harq_mask,dlsch0_harq->round,
LOG_D(PHY,"NFAPI: harq_pid %d harq_mask %x, round %d ndi (%d,%d) \n",rel8->harq_process,dlsch0->harq_mask,dlsch0_harq->round,
dlsch0_harq->ndi,rel8->new_data_indicator_1);
switch (rel8->dci_format) {
......
......@@ -174,13 +174,13 @@ void handle_nfapi_dlsch_pdu(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,
dlsch0_harq->pdsch_start = eNB->pdcch_vars[proc->subframe_tx & 1].num_pdcch_symbols;
if (dlsch0_harq->round==0) { //get pointer to SDU if this a new SDU
if (rel8->rnti != 0xFFFF) LOG_I(PHY,"NFAPI: frame %d, subframe %d: programming dlsch for round 0, rnti %x, UE_id %d, harq_pid %d\n",
if (rel8->rnti != 0xFFFF) LOG_D(PHY,"NFAPI: frame %d, subframe %d: programming dlsch for round 0, rnti %x, UE_id %d, harq_pid %d\n",
proc->frame_tx,proc->subframe_tx,rel8->rnti,UE_id,harq_pid);
if (codeword_index == 0) dlsch0_harq->pdu = sdu;
else dlsch1_harq->pdu = sdu;
}
else {
if (rel8->rnti != 0xFFFF) LOG_I(PHY,"NFAPI: frame %d, subframe %d: programming dlsch for round %d, rnti %x, UE_id %d, harq_pid %d\n",
if (rel8->rnti != 0xFFFF) LOG_D(PHY,"NFAPI: frame %d, subframe %d: programming dlsch for round %d, rnti %x, UE_id %d, harq_pid %d\n",
proc->frame_tx,proc->subframe_tx,dlsch0_harq->round,
rel8->rnti,UE_id,harq_pid);
}
......@@ -279,7 +279,7 @@ void handle_ulsch_cqi_ri_pdu(PHY_VARS_eNB *eNB,int UE_id,nfapi_ul_config_request
if (ulsch_harq->O_RI>1) ulsch_harq->Or2 = rel9->aperiodic_cqi_pmi_ri_report.cc[0].dl_cqi_pmi_size[1];
ulsch->beta_offset_ri_times8 = to_beta_offset_ri[rel9->delta_offset_ri];
ulsch->beta_offset_cqi_times8 = to_beta_offset_cqi[rel9->delta_offset_cqi];
LOG_I(PHY,"Filling ulsch_cqi_ri information for frame %d, subframe %d : O_RI %d, Or1 %d, beta_offset_cqi_times8 %d (%d)\n",
LOG_D(PHY,"Filling ulsch_cqi_ri information for frame %d, subframe %d : O_RI %d, Or1 %d, beta_offset_cqi_times8 %d (%d)\n",
frame,subframe,ulsch_harq->O_RI,ulsch_harq->Or1,ulsch->beta_offset_cqi_times8,
rel9->delta_offset_cqi);
}
......@@ -313,7 +313,7 @@ void handle_uci_harq_information(PHY_VARS_eNB *eNB, LTE_eNB_UCI *uci,nfapi_ul_co
if (eNB->frame_parms.frame_type == FDD) {
uci->num_pucch_resources = harq_information->harq_information_rel9_fdd.number_of_pucch_resources;
LOG_I(PHY,"Programming UCI HARQ mode %d : size %d in (%d,%d)\n",
LOG_D(PHY,"Programming UCI HARQ mode %d : size %d in (%d,%d)\n",
harq_information->harq_information_rel9_fdd.ack_nack_mode,
harq_information->harq_information_rel9_fdd.harq_size,
uci->frame,uci->subframe);
......@@ -418,7 +418,7 @@ void handle_uci_sr_pdu(PHY_VARS_eNB *eNB,int UE_id,nfapi_ul_config_request_pdu_t
uci->srs_active = srs_active;
uci->active = 1;
LOG_I(PHY,"Programming UCI SR rnti %x, pucch1_0 %d for (%d,%d)\n",
LOG_D(PHY,"Programming UCI SR rnti %x, pucch1_0 %d for (%d,%d)\n",
uci->rnti,uci->n_pucch_1_0_sr[0],frame,subframe);
......@@ -449,7 +449,7 @@ void handle_uci_harq_pdu(PHY_VARS_eNB *eNB,int UE_id,nfapi_ul_config_request_pdu
LTE_eNB_UCI *uci = &eNB->uci_vars[UE_id];
LOG_I(PHY,"Frame %d, Subframe %d: Programming UCI_HARQ process (type %d)\n",frame,subframe,HARQ);
LOG_D(PHY,"Frame %d, Subframe %d: Programming UCI_HARQ process (type %d)\n",frame,subframe,HARQ);
uci->frame = frame;
uci->subframe = subframe;
uci->rnti = ul_config_pdu->uci_harq_pdu.ue_information.ue_information_rel8.rnti;
......
......@@ -113,7 +113,6 @@ void RCconfig_RU(void) {
int j = 0;
int i = 0;
int num_bands = 0;
paramdef_t RUParams[] = RUPARAMS_DESC;
......@@ -141,7 +140,10 @@ void RCconfig_RU(void) {
RC.ru[j]->idx = j;
RC.ru[j]->if_timing = synch_to_ext_device;
RC.ru[j]->num_eNB = RUParamList.paramarray[j][RU_ENB_LIST_IDX].numelt;
if (RC.nb_L1_inst >0)
RC.ru[j]->num_eNB = RUParamList.paramarray[j][RU_ENB_LIST_IDX].numelt;
else
RC.ru[j]->num_eNB = 0;
for (i=0;i<RC.ru[j]->num_eNB;i++) RC.ru[j]->eNB_list[i] = RC.eNB[RUParamList.paramarray[j][RU_ENB_LIST_IDX].iptr[i]][0];
......@@ -185,7 +187,7 @@ void RCconfig_RU(void) {
RC.ru[j]->max_pdschReferenceSignalPower = *(RUParamList.paramarray[j][RU_MAX_RS_EPRE_IDX].uptr);;
RC.ru[j]->max_rxgain = *(RUParamList.paramarray[j][RU_MAX_RXGAIN_IDX].uptr);
RC.ru[j]->num_bands = RUParamList.paramarray[j][RU_BAND_LIST_IDX].numelt;
for (i=0;i<num_bands;i++) RC.ru[j]->band[i] = RUParamList.paramarray[j][RU_BAND_LIST_IDX].iptr[i];
for (i=0;i<RC.ru[j]->num_bands;i++) RC.ru[j]->band[i] = RUParamList.paramarray[j][RU_BAND_LIST_IDX].iptr[i];
} //strcmp(local_rf, "yes") == 0
else {
printf("RU %d: Transport %s\n",j,*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr));
......@@ -292,8 +294,7 @@ void RCconfig_L1() {
printf("Initializing northbound interface for L1\n");
l1_north_init_eNB();
} else {
AssertFatal (0,
"No " CONFIG_STRING_L1_LIST " configuration found");
LOG_I(PHY,"No " CONFIG_STRING_L1_LIST " configuration found");
}
}
......
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "93";
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2685000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.19/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.5/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_if_name = "eth1";
remote_address = "10.10.10.19";
local_address = "10.10.10.18";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
eNB_instances = [0];
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
......@@ -252,6 +252,8 @@ int connect_rau(RU_t *ru) {
}
cap->num_bands = ru->num_bands;
for (i=0;i<ru->num_bands;i++) {
LOG_I(PHY,"Band %d: nb_rx %d nb_tx %d pdschReferenceSignalPower %d rxgain %d\n",
ru->band[i],ru->nb_rx,ru->nb_tx,ru->max_pdschReferenceSignalPower,ru->max_rxgain);
cap->band_list[i] = ru->band[i];
cap->nb_rx[i] = ru->nb_rx;
cap->nb_tx[i] = ru->nb_tx;
......@@ -1350,17 +1352,18 @@ static void* ru_thread( void* param ) {
else ret = attach_rru(ru);
AssertFatal(ret==0,"Cannot connect to radio\n");
}
// if (ru->function == eNodeB_3GPP) { // configure RF parameters only for 3GPP eNodeB, we need to get them from RAU otherwise
if (ru->if_south == LOCAL_RF) { // configure RF parameters only
fill_rf_config(ru,ru->rf_config_file);
init_frame_parms(&ru->frame_parms,1);
phy_init_RU(ru);
// }
ret = openair0_device_load(&ru->rfdevice,&ru->openair0_cfg);
if (setup_RU_buffers(ru)!=0) {
ret = openair0_device_load(&ru->rfdevice,&ru->openair0_cfg);
}
if (setup_RU_buffers(ru)!=0) {
printf("Exiting, cannot initialize RU Buffers\n");
exit(-1);
}
}
LOG_I(PHY, "Signaling main thread that RU %d is ready\n",ru->idx);
pthread_mutex_lock(&RC.ru_mutex);
......
......@@ -673,7 +673,7 @@ static void get_options(void) {
RCConfig();
NB_eNB_INST = RC.nb_inst;
NB_RU = RC.nb_RU;
printf("Configuration: nb_inst %d, nb_ru %d\n",NB_eNB_INST,NB_RU);
printf("Configuration: nb_rrc_inst %d, nb_L1_inst %d, nb_ru %d\n",NB_eNB_INST,RC.nb_L1_inst,NB_RU);
}
} else if (UE_flag == 1 && (CONFIG_GETCONFFILE != NULL)) {
// Here the configuration file is the XER encoded UE capabilities
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment