Commit 1213521c authored by fnabet's avatar fnabet

merge from 2017.w12

parents 353334f6 a77082c1
......@@ -283,8 +283,10 @@ if (${RRC_ASN1_VERSION} STREQUAL "Rel8")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-86.asn)
elseif (${RRC_ASN1_VERSION} STREQUAL "CBA")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20-lola.asn)
else()
elseif (${RRC_ASN1_VERSION} STREQUAL "Rel10")
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/EUTRA-RRC-Definitions-a20.asn)
else()
set (RRC_GRAMMAR ${OPENAIR2_DIR}/RRC/LITE/MESSAGES/asn1c/ASN1_files/RRC-e10.asn)
endif (${RRC_ASN1_VERSION} STREQUAL "Rel8")
set (RRC_FULL_DIR ${asn1_generated_dir}/${RRC_ASN1_VERSION})
......@@ -561,6 +563,7 @@ elseif (${RF_BOARD} STREQUAL "OAI_LMSSDR")
include_directories("/usr/local/include/lime")
include_directories("/usr/include/lime")
LINK_DIRECTORIES("/usr/lib/x86_64-linux-gnu")
LINK_DIRECTORIES("/usr/local/lib")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lmsSDR")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/lms7002m")
LINK_DIRECTORIES("${CMAKE_CURRENT_BINARY_DIR}/Si5351C")
......@@ -1768,6 +1771,7 @@ add_executable(lte-softmodem
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${GTPU_need_ITTI}
${HW_SOURCE}
${TRANSPORT_SOURCE}
......@@ -1804,6 +1808,7 @@ add_executable(lte-softmodem-nos1
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR_DIR}/common/utils/system.c
${HW_SOURCE}
${TRANSPORT_SOURCE}
${RTAI_SOURCE}
......@@ -1899,6 +1904,7 @@ add_executable(oaisim
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
${GTPU_need_ITTI}
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${HW_SOURCE}
......@@ -1945,6 +1951,7 @@ add_executable(oaisim_nos1
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_DIR}/common/utils/system.c
${HW_SOURCE}
${TRANSPORT_SOURCE}
${XFORMS_SOURCE}
......@@ -2059,22 +2066,22 @@ endforeach(myExe)
#ensure that the T header files are generated before targets depending on them
if (${T_TRACER})
add_dependencies(lte-softmodem generate_T)
add_dependencies(lte-softmodem-nos1 generate_T)
add_dependencies(rrh_gw generate_T)
add_dependencies(oaisim generate_T)
add_dependencies(oaisim_nos1 generate_T)
add_dependencies(dlsim generate_T)
add_dependencies(dlsim_tm4 generate_T)
add_dependencies(dlsim_tm7 generate_T)
add_dependencies(ulsim generate_T)
add_dependencies(pbchsim generate_T)
add_dependencies(scansim generate_T)
add_dependencies(mbmssim generate_T)
add_dependencies(pdcchsim generate_T)
add_dependencies(pucchsim generate_T)
add_dependencies(prachsim generate_T)
add_dependencies(syncsim generate_T)
foreach(i
#all "add_executable" definitions (except tests, rb_tool, updatefw)
lte-softmodem lte-softmodem-nos1 rrh_gw oaisim oaisim_nos1
dlsim_tm4 dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim
pdcchsim pucchsim prachsim syncsim
#all "add_library" definitions
ITTI RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB
oai_exmimodevif oai_usrpdevif oai_bladerfdevif oai_lmssdrdevif
oai_eth_transpro
FLPT_MSG ASYNC_IF FLEXRAN_AGENT HASHTABLE MSC UTIL OMG_SUMO SECU_OSA
SECU_CN SCHED_LIB PHY L2 default_sched remote_sched RAL MIH CN_UTILS
GTPV1U SCTP_CLIENT UDP LIB_NAS_UE LFDS LFDS7 SIMU SIMU_ETH OPENAIR0_LIB)
if (TARGET ${i})
add_dependencies(${i} generate_T)
endif()
endforeach(i)
endif (${T_TRACER})
##################################################
......@@ -2099,11 +2106,16 @@ endforeach()
# force castxml and clang compilation with gnu89 standard
# we can't use cXX standard as pthread_rwlock_t is gnu standard
list(APPEND itti_compiler_options "-std=gnu89")
set (ITTI_H ${ITTI_DIR}/intertask_interface_types.h)
if(EXISTS /usr/bin/gccxml)
set(xml_command gccxml ${itti_compiler_options} -fxml=${OPENAIR_BIN_DIR}/messages.xml ${ITTI_H})
else()
set(xml_command castxml --castxml-gccxml ${itti_compiler_options} ${ITTI_H} -o ${OPENAIR_BIN_DIR}/messages.xml)
endif()
add_custom_command (
OUTPUT ${OPENAIR_BIN_DIR}/messages.xml
COMMAND gccxml ${itti_compiler_options} -fxml=${OPENAIR_BIN_DIR}/messages.xml ${ITTI_H}
COMMAND ${xml_command}
DEPENDS ${S1AP_OAI_generated} ${RRC_FULL_DIR}/asn1_constants.h
)
......
......@@ -716,6 +716,7 @@ ADD_EXECUTABLE(at_nas_ue ${OPENAIR_NAS_DIR}/UE/UEprocess.c
${OPENAIR_NAS_DIR}/UE/nas_proc.c
${OPENAIR_NAS_DIR}/UE/nas_user.c
${OPENAIR_DIR}/common/utils/utils.c
${OPENAIR_DIR}/common/utils/system.c
)
target_link_libraries (at_nas_ue
......
......@@ -239,6 +239,20 @@ Obj.# Case# Test# Description
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 76 lte-softmodem + RRU (NGFI IF4P5, UDP) tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 76 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 02 Band 7 FDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 03 Band 7 FDD 5MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 04 Band 7 FDD 10MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 05 Band 7 FDD 20MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 76 06 Band 7 FDD 5MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 07 Band 7 FDD 10MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 08 Band 7 FDD 20MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 09 Band 7 FDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 10 Band 7 FDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 76 11 Band 7 FDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 80 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
......
......@@ -8664,6 +8664,19 @@ c
<nruns>10</nruns>
</testCase>
<testCase id="017600"></testCase>
<testCase id="017601"></testCase>
<testCase id="017602"></testCase>
<testCase id="017603"></testCase>
<testCase id="017604"></testCase>
<testCase id="017605"></testCase>
<testCase id="017606"></testCase>
<testCase id="017607"></testCase>
<testCase id="017608"></testCase>
<testCase id="017609"></testCase>
<testCase id="017610"></testCase>
<testCase id="017611"></testCase>
<testCase id="018600"></testCase>
<testCase id="018601"></testCase>
<testCase id="018602"></testCase>
......
sudo rmmod nasmesh || true
sudo rmmod ue_ip || true
sudo /opt/ltebox/tools/stop_ltebox || true
sudo /opt/hss_sim0609/starthss_real
cd /tmp/oai_test_setup/oai
source oaienv
sudo rmmod nasmesh || true
sudo rmmod ue_ip || true
cd cmake_targets
rm -rf log
mkdir -p log
......
......@@ -3,6 +3,8 @@ stty isig intr ^C
cd /tmp/oai_test_setup/oai
source oaienv
sudo rmmod nasmesh || true
sudo rmmod ue_ip || true
cd cmake_targets/lte_build_oai/build
ulimit -c unlimited
sudo rm -f core
......
......@@ -3,6 +3,8 @@ stty isig intr ^C
cd /tmp/oai_test_setup/oai
source oaienv
sudo rmmod nasmesh || true
sudo rmmod ue_ip || true
cd cmake_targets/autotests/v2/actions
sudo python start_3276.py
......
......@@ -16,6 +16,8 @@ stty isig intr ^C
cd /tmp/oai_test_setup/oai
source oaienv
sudo rmmod nasmesh || true
sudo rmmod ue_ip || true
cd cmake_targets/autotests/v2/actions
python start_bandrich.py
......
This diff is collapsed.
......@@ -23,6 +23,9 @@ eNBs =
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
......@@ -31,12 +34,13 @@ eNBs =
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 60;
rx_gain = 111;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
......@@ -64,9 +68,9 @@ eNBs =
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -85;
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
......@@ -76,13 +80,13 @@ eNBs =
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -100;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
......@@ -97,7 +101,7 @@ eNBs =
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
......@@ -133,44 +137,40 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.170";
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
rrh_gw_config = (
{
local_if_name = "eth0";
#remote_address = "169.254.10.158";
#local_address = "169.254.8.15";
remote_address = "74:d4:35:cc:88:45";
local_address = "d4:be:d9:22:0a:ac";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "lmssdr";
iq_txshift = 0;
tx_sample_advance = 70;
tx_scheduling_advance = 8;
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.18/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.18/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth1";
remote_address = "10.10.10.157";
local_address = "10.10.10.18";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
......
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.18/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.18/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth1";
remote_address = "10.10.10.157";
local_address = "10.10.10.18";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "udp_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;