Commit 1961fd7f authored by Cedric Roux's avatar Cedric Roux

remove gccxml/castxml

This was used for the ITTI analyzer.

The ITTI analyzer is now to be considered obsolete.
The source code will be removed at some point.
parent 0f94c348
......@@ -262,7 +262,6 @@ if (${ENABLE_ITTI})
# add .h files if depend on (this one is generated)
${ITTI_DIR}/intertask_interface.h
${ITTI_DIR}/intertask_interface.c
${ITTI_DIR}/intertask_interface_dump.c
${ITTI_DIR}/backtrace.c
${ITTI_DIR}/memory_pools.c
${ITTI_DIR}/signals.c
......@@ -1905,7 +1904,6 @@ add_definitions(-DASN1_MINIMUM_VERSION=924)
add_executable(lte-softmodem
${rrc_h}
${s1ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-enb.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
......@@ -1945,7 +1943,6 @@ target_link_libraries (lte-softmodem ${T_LIB})
add_executable(lte-softmodem-nos1
${rrc_h}
${s1ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-enb.c
${OPENAIR_TARGETS}/RT/USER/lte-ru.c
......@@ -1984,7 +1981,6 @@ target_link_libraries (lte-softmodem-nos1 ${T_LIB})
add_executable(lte-uesoftmodem
${rrc_h}
${s1ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-ue.c
${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
......@@ -2023,7 +2019,6 @@ target_link_libraries (lte-uesoftmodem ${T_LIB})
add_executable(lte-uesoftmodem-nos1
${rrc_h}
${s1ap_h}
${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/lte-ue.c
${OPENAIR_TARGETS}/RT/USER/lte-uesoftmodem.c
......@@ -2091,7 +2086,6 @@ target_link_libraries (lte-uesoftmodem-nos1 ${T_LIB})
#special case for dlim TM4, which uses its own version of phy_scope code
add_executable(dlsim_tm4
# ${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/dlsim_tm4.c
${OPENAIR1_DIR}/PHY/TOOLS/lte_phy_scope_tm4.c
${T_SOURCE}
......@@ -2104,7 +2098,6 @@ target_link_libraries (dlsim_tm4
foreach(myExe dlsim dlsim_tm7 ulsim pbchsim scansim mbmssim pdcchsim pucchsim prachsim syncsim)
add_executable(${myExe}
# ${OPENAIR_BIN_DIR}/messages_xml.h
${OPENAIR1_DIR}/SIMULATION/LTE_PHY/${myExe}.c
${XFORMS_SOURCE}
${T_SOURCE}
......@@ -2126,7 +2119,6 @@ add_executable(test_epc_generate_scenario
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR3_DIR}/S1AP/s1ap_eNB_defs.h
# ${OPENAIR_BIN_DIR}/messages_xml.h
)
target_link_libraries (test_epc_generate_scenario
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
......@@ -2146,7 +2138,6 @@ add_executable(test_epc_play_scenario
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
target_link_libraries (test_epc_play_scenario
......@@ -2202,43 +2193,6 @@ endif (${T_TRACER})
# Generated specific cases is not regular code
###############################################
##################""
# itti symbolic debug print require to generate a specific include file
########################################
# retrieve the compiler options to send it to gccxml
get_directory_property( DirDefs COMPILE_DEFINITIONS )
foreach( d ${DirDefs} )
list(APPEND itti_compiler_options "-D${d}")
endforeach()
get_directory_property( DirDefs INCLUDE_DIRECTORIES )
foreach( d ${DirDefs} )
list(APPEND itti_compiler_options "-I${d}")
endforeach()
# castxml doesn't work with c11 (gcc 5 default)
# force castxml and clang compilation with gnu89 standard
# we can't use cXX standard as pthread_rwlock_t is gnu standard
list(APPEND itti_compiler_options "-std=gnu89;-DASN_DISABLE_OER_SUPPORT;-D'MAKE_VERSION(a,b,c)=((a)*256+(b)*16+c)'")
set (ITTI_H ${ITTI_DIR}/intertask_interface_types.h)
if(EXISTS /usr/bin/gccxml)
set(xml_command gccxml ${itti_compiler_options} -fxml=${OPENAIR_BIN_DIR}/messages.xml ${ITTI_H})
else()
set(xml_command castxml --castxml-gccxml ${itti_compiler_options} ${ITTI_H} -o ${OPENAIR_BIN_DIR}/messages.xml)
endif()
add_custom_command (
OUTPUT ${OPENAIR_BIN_DIR}/messages.xml
COMMAND ${xml_command}
DEPENDS ${S1AP_OAI_generated} ${RRC_FULL_DIR}/asn_constant.h
)
add_custom_command (
OUTPUT ${OPENAIR_BIN_DIR}/messages_xml.h
COMMAND sed -e 's/ *//' -e 's/\"/\\\\\"/g' -e 's/^/\"/' -e 's/$$/\\\\n\"/' ${OPENAIR_BIN_DIR}/messages.xml > ${OPENAIR_BIN_DIR}/messages_xml.h
DEPENDS ${OPENAIR_BIN_DIR}/messages.xml ${RRC_FULL_DIR}/asn_constant.h
)
################
# Kernel modules
###############
......
......@@ -504,24 +504,24 @@ check_install_oai_software() {
$SUDO apt install -y software-properties-common
case "$(get_distribution_release)" in
"ubuntu14.04")
specific_packages="libtasn1-3-dev gccxml libgnutls-dev libatlas-dev iproute libconfig8-dev"
specific_packages="libtasn1-3-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
# For iperf3
$SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
$SUDO apt-get update
;;
"ubuntu16.04")
specific_packages="libtasn1-6-dev gccxml libgnutls-dev libatlas-dev iproute libconfig8-dev"
specific_packages="libtasn1-6-dev libgnutls-dev libatlas-dev iproute libconfig8-dev"
;;
"ubuntu17.04")
specific_packages="libtasn1-6-dev castxml libgnutls28-dev libatlas-dev iproute libconfig8-dev"
specific_packages="libtasn1-6-dev libgnutls28-dev libatlas-dev iproute libconfig8-dev"
;;
"ubuntu17.10")
specific_packages="libtasn1-6-dev castxml libgnutls28-dev iproute libconfig8-dev"
specific_packages="libtasn1-6-dev libgnutls28-dev iproute libconfig8-dev"
LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
;;
"ubuntu18.04")
specific_packages="libtasn1-6-dev castxml libgnutls28-dev iproute2 libconfig-dev"
specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
;;
......@@ -598,11 +598,8 @@ check_install_oai_software() {
$SUDO $INSTALLER install -y https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
fi
$SUDO $INSTALLER install -y python-epdb
$SUDO $INSTALLER install -y gccxml
else
$SUDO $INSTALLER install -y mscgen pydb
# Fedora repos already contain gccxml's successor castxml.
$SUDO $INSTALLER install -y castxml
fi
$SUDO $INSTALLER install -y \
......
......@@ -39,7 +39,6 @@
#include "assertions.h"
#include "intertask_interface.h"
#include "intertask_interface_dump.h"
#if T_TRACER
#include "T.h"
......@@ -770,7 +769,7 @@ void itti_terminate_tasks(task_id_t task_id)
}
int itti_init(task_id_t task_max, thread_id_t thread_max, MessagesIds messages_id_max, const task_info_t *tasks_info,
const message_info_t *messages_info, const char * const messages_definition_xml, const char * const dump_file_name)
const message_info_t *messages_info)
{
task_id_t task_id;
thread_id_t thread_id;
......
This diff is collapsed.
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#ifndef INTERTASK_INTERFACE_DUMP_H_
#define INTERTASK_INTERFACE_DUMP_H_
int itti_dump_queue_message(task_id_t sender_task, message_number_t message_number, MessageDef *message_p, const char *message_name,
const uint32_t message_size);
int itti_dump_init(const char * const messages_definition_xml, const char * const dump_file_name);
void itti_dump_exit(void);
void itti_dump_thread_use_ring_buffer(void);
#endif /* INTERTASK_INTERFACE_DUMP_H_ */
......@@ -41,10 +41,6 @@
#ifndef CHECK_PROTOTYPE_ONLY
const char * const messages_definition_xml = {
#include "messages_xml.h"
};
/* Map task id to printable name. */
const task_info_t tasks_info[] = {
{0, TASK_UNKNOWN, 0, 0, "TASK_UNKNOWN"},
......@@ -71,8 +67,7 @@ const message_info_t messages_info[] = {
* \param messages_info Pointer on messages information as created by this include file
**/
int itti_init(task_id_t task_max, thread_id_t thread_max, MessagesIds messages_id_max, const task_info_t *tasks_info,
const message_info_t *messages_info, const char * const messages_definition_xml,
const char * const dump_file_name);
const message_info_t *messages_info);
#endif /* INTERTASK_INTERFACE_INIT_H_ */
/* @} */
......@@ -29,7 +29,7 @@ PLMN: {
PLMN4: {
FULLNAME="OAI LTEBOX";
SHORTNAME="OAIALU";
MNC="93";
MNC="92";
MCC="208";
};
PLMN5: {
......@@ -86,20 +86,20 @@ UE0:
};
SIM: {
MSIN="0100001111";
USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
OPC="e734f8734007d6c5ce7a0508809e7e9c";
MSIN="0100001100";
USIM_API_K="fec86ba6eb707ed08905757b1bb44b8f";
OPC="C42449363BBAD02B66D16BC975D77CC1";
MSISDN="33611123456";
};
# Home PLMN Selector with Access Technology
HPLMN= "20893";
HPLMN= "20892";
# User controlled PLMN Selector with Access Technology
UCPLMN_LIST = ();
# Operator PLMN List
OPLMN_LIST = ("00101", "20810", "20811", "20813", "20893", "310280", "310028");
OPLMN_LIST = ("00101", "20810", "20811", "20813", "20892", "310280", "310028");
# Operator controlled PLMN Selector with Access Technology
OCPLMN_LIST = ("22210", "21401", "21406", "26202", "26204");
......
......@@ -1206,7 +1206,7 @@ int main( int argc, char **argv )
logInit();
set_glog(LOG_TRACE, LOG_MED);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
set_comp_log(ENB_APP, LOG_TRACE, LOG_MED, 1);
set_comp_log(S1AP, LOG_TRACE, LOG_MED, 1);
......
......@@ -69,7 +69,7 @@ int main(int argc, char *argv[])
/* Calling each layer init function */
log_init(&mme_config);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, NULL);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
sctp_init(&mme_config);
udp_init(&mme_config);
s1ap_mme_init(&mme_config);
......
......@@ -57,7 +57,6 @@ static void *eNB_app_task (void *args_p);
void mme_test_s1_start_test(instance_t instance);
//------------------------------------------------------------------------------
static char *conf_config_file_name = NULL;
static char *itti_dump_file = NULL;
const Enb_properties_array_t *enb_properties = NULL;
int16_t glog_level = LOG_INFO;
int16_t glog_verbosity = LOG_MED;
......@@ -77,10 +76,6 @@ static void get_options (int argc, char **argv)
while ((c = getopt_long (argc, argv, "K:g:G:O:",NULL,NULL)) != -1) {
switch (c) {
case 'K':
itti_dump_file = strdup(optarg);
break;
case 'O':
conf_config_file_name = optarg;
break;
......@@ -316,7 +311,7 @@ int main( int argc, char **argv )
/* Read eNB configuration file */
enb_properties = enb_config_init(conf_config_file_name);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
itti_wait_ready(1);
......
......@@ -19,7 +19,7 @@ First, you must have all four openair SW directories, openair1, openair2, openai
- libconfig++8-dev
- libgtk-3-dev
- libpgm-5.1 and libpgm-5.1-dev for distributed simulation with reliable multicast transmport
- libxml2 and libxml2-dev and gccxml
- libxml2 and libxml2-dev
- libforms-bin libforms-dev
- nettle-dev nettle-bin openssl libssl-dev
- libatlas-base-dev and libatlas-headers (for Ubuntu 11.04, libatlas-dev instead of libatlas-headers)
......@@ -113,4 +113,3 @@ Please choose the web server that should be automatically configured to run phpM
Web server to reconfigure automatically:
[*] apache2
[ ] lighttpd
\ No newline at end of file
......@@ -149,10 +149,6 @@ char logmem_filename[1024] = {0};
// This is a dummy declaration (dlsch_demodulation.c is no longer compiled for eNodeB)
int16_t dlsch_demod_shift = 0;
#if defined(ENABLE_ITTI)
static char *itti_dump_file = NULL;
#endif
int UE_scan = 1;
int UE_scan_carrier = 0;
runmode_t mode = normal_txrx;
......@@ -976,7 +972,7 @@ int main( int argc, char **argv )
log_set_instance_type (LOG_INSTANCE_ENB);
printf("ITTI init\n");
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
// initialize mscgen log after ITTI
MSC_INIT(MSC_E_UTRAN, THREAD_MAX+TASK_MAX);
......
......@@ -176,7 +176,6 @@
{"a" , CONFIG_HLP_CHOFF, 0, iptr:&chain_offset, defintval:0, TYPE_INT, 0}, \
{"d" , CONFIG_HLP_SOFTS, PARAMFLAG_BOOL, uptr:(uint32_t *)&do_forms, defintval:0, TYPE_INT8, 0}, \
{"E" , CONFIG_HLP_TQFS, PARAMFLAG_BOOL, i8ptr:&threequarter_fs, defintval:0, TYPE_INT8, 0}, \
{"K" , CONFIG_HLP_ITTIL, PARAMFLAG_NOFREE, strptr:&itti_dump_file, defstrval:"/tmp/itti.dump", TYPE_STRING, 0}, \
{"m" , CONFIG_HLP_DLMCS, 0, uptr:&target_dl_mcs, defintval:0, TYPE_UINT, 0}, \
{"t" , CONFIG_HLP_ULMCS, 0, uptr:&target_ul_mcs, defintval:0, TYPE_UINT, 0}, \
{"W" , CONFIG_HLP_L2MONW, 0, strptr:(char **)&in_ip, defstrval:"127.0.0.1", TYPE_STRING, sizeof(in_ip)}, \
......
......@@ -149,10 +149,6 @@ int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
#if defined(ENABLE_ITTI)
static char *itti_dump_file = NULL;
#endif
int UE_scan = 1;
int UE_scan_carrier = 0;
int simL1flag = 0;
......@@ -859,7 +855,7 @@ int main( int argc, char **argv )
printf("ITTI init\n");
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info, messages_definition_xml, itti_dump_file);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
// initialize mscgen log after ITTI
MSC_INIT(MSC_E_UTRAN, THREAD_MAX+TASK_MAX);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment