[GITLAB] - UPGRADE TO v12 on Wednesday the 18th of December at 11.30AM

Commit 1b08d451 authored by Cedric Roux's avatar Cedric Roux

Merge remote-tracking branch 'oai/develop' into bugfix-95-asn1c_warnings_removal

parents ccba7892 e7852a6f
......@@ -8,6 +8,7 @@ job1:
- echo $EXTERNAL_SHARE_DIR
- echo $SHELL
- git rev-parse --abbrev-ref HEAD
- git_repo=`git config --get remote.origin.url`
- git_head=`git rev-parse HEAD`
- echo $git_head
- tmp=`git show-ref --head | grep $git_head`
......@@ -23,8 +24,8 @@ job1:
- echo $NRUNS_LTE_SOFTMODEM
- echo $TIMEOUT_CMD
- mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR
......
......@@ -176,42 +176,65 @@ add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
Message("RF_BOARD is ${RF_BOARD}")
# Below has been put in comment because does not work with
# SVN authentication.
#
#find_package(Subversion)
#if(SUBVERSION_FOUND)
# Subversion_WC_INFO(${OPENAIR_DIR} openair)
# set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
# Subversion_WC_LOG(${OPENAIR_DIR} Project)
#else()
# set (FIRMWARE_VERSION "No svn information")
#endif()
#add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
set(GIT_BRANCH "UNKNOWN")
set(GIT_COMMIT_HASH "UNKNOWN")
set(GIT_COMMIT_DATE "UNKNOWN")
find_package(Git)
if(GIT_FOUND)
message("git found: ${GIT_EXECUTABLE}")
# Get the current working branch
execute_process(
COMMAND git rev-parse --abbrev-ref HEAD
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_BRANCH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest abbreviated commit hash of the working branch
execute_process(
COMMAND git log -1 --format=%h
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_HASH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest commit date of the working branch
execute_process(
COMMAND git log -1 --format=%cd
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_DATE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
# Below is a hard-coded info
set (FIRMWARE_VERSION "No svn information")
add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"OpenAirInterface web site\"")
add_definitions("-DPACKAGE_VERSION=\"Branch: ${GIT_BRANCH} Abrev. Hash: ${GIT_COMMIT_HASH} Date: ${GIT_COMMIT_DATE}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
# Debug related options
#########################################
add_boolean_option(MSG_PRINT False "print debug messages")
add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
add_boolean_option(XER_PRINT False "print XER Format")
add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(ASN_DEBUG False "ASN1 coder/decoder Debug")
add_boolean_option(EMIT_ASN_DEBUG False "ASN1 coder/decoder Debug")
add_boolean_option(MSG_PRINT False "print debug messages")
add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
add_boolean_option(XER_PRINT False "print XER Format")
add_boolean_option(RRC_MSG_PRINT False "print RRC messages")
add_boolean_option(PDCP_MSG_PRINT False "print PDCP messages to /tmp/pdcp.log")
add_boolean_option(DEBUG_PDCP_PAYLOAD False "print PDCP PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(DEBUG_MAC_INTERFACE False "print MAC-RLC PDU exchange to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TEST_OMG False "???")
add_boolean_option(DEBUG_OMG False "???")
add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
add_boolean_option(TRACE_RLC_PAYLOAD False "print RLC PDU to stdout") # if true, make sure that global and PDCP log levels are trace
add_boolean_option(TEST_OMG False "???")
add_boolean_option(DEBUG_OMG False "???")
add_boolean_option(XFORMS False "This adds the possibility to see the signal oscilloscope")
add_boolean_option(PRINT_STATS False "This adds the possibility to see the status")
add_boolean_option(DEBUG_CONSOLE False "makes debugging easier, disables stdout/stderr buffering")
......@@ -350,6 +373,7 @@ set(S1AP_OAI_generated
${S1AP_C_DIR}/s1ap_decoder.c
${S1AP_C_DIR}/s1ap_encoder.c
${S1AP_C_DIR}/s1ap_xer_print.c
${S1AP_C_DIR}/s1ap_compare.c
${S1AP_C_DIR}/s1ap_ies_defs.h
)
file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
......@@ -1130,7 +1154,6 @@ add_library(CN_UTILS
${OPENAIR3_DIR}/UTILS/conversions.c
${OPENAIR3_DIR}/UTILS/enum_string.c
${OPENAIR3_DIR}/UTILS/log.c
${OPENAIR3_DIR}/UTILS/mme_config.c
${OPENAIR3_DIR}/UTILS/mcc_mnc_itu.c
)
......@@ -1471,6 +1494,9 @@ include(FindPkgConfig)
pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
include_directories(${LIBXML2_INCLUDE_DIRS})
pkg_search_module(LIBXSLT libxslt REQUIRED)
include_directories(${LIBXSLT_INCLUDE_DIRS})
pkg_search_module(OPENSSL openssl REQUIRED)
include_directories(${OPENSSL_INCLUDE_DIRS})
......@@ -1762,6 +1788,7 @@ endforeach(myExe)
add_executable(test_epc_generate_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.c
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.h
${OPENAIR2_DIR}/ENB_APP/enb_config.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
......@@ -1770,7 +1797,28 @@ add_executable(test_epc_generate_scenario
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_link_libraries (test_epc_generate_scenario
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
add_executable(test_epc_play_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_decode.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_display.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_fsm.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_parse.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_compare_ie.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_eNB_defs.h
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_sctp.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
target_link_libraries (test_epc_play_scenario
-Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
......
......@@ -189,6 +189,22 @@ Obj.# Case# Test# Description
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 80 00 lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 80 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 80 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 80 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 80 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 85 00 lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 85 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 85 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 85 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 85 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests
......
......@@ -216,7 +216,7 @@ def sftp_module (username, password, hostname, ports, paramList,logfile):
# \brief bash script stub put at the end of scripts to terminate it
# \param timeout_cmd terminate script after timeout_cmd seconds
# \param terminate_missing_procs if True terminate all the processes launched by script if one of them terminates prematurely (due to error)
def finalize_deploy_script (timeout_cmd, terminate_missing_procs='True'):
def finalize_deploy_script (timeout_cmd, terminate_missing_procs='False'):
cmd = 'declare -i timeout_cmd='+str(timeout_cmd) + '\n'
if terminate_missing_procs == 'True':
cmd = cmd + """
......@@ -1105,6 +1105,7 @@ pw =''
i = 0
dlsim=0
localshell=0
GitOAI5GRepo=''
GitOAI5GRepoBranch=''
GitOAI5GHeadVersion=''
user=''
......@@ -1141,6 +1142,9 @@ while i < len (sys.argv):
i = i +1
elif arg == '-c':
cleanUpRemoteMachines=True
elif arg == '-5GRepo':
GitOAI5GRepo = sys.argv[i+1]
i = i +1
elif arg == '-5GRepoBranch':
GitOAI5GRepoBranch = sys.argv[i+1]
i = i +1
......@@ -1190,6 +1194,7 @@ while i < len (sys.argv):
print "-r: Remove the log directory in autotests"
print "-g: Run test cases in a group"
print "-c: Run cleanup scripts on remote machines and exit"
print "-5GRepo: Repository for OAI 5G to use to run tests (overrides GitOAI5GRepo in test_case_list.xml)"
print "-5GRepoBranch: Branch for OAI 5G Repository to run tests (overrides the branch in test_case_list.xml)"
print "-5GRepoHeadVersion: Head commit on which to run tests (overrides the branch in test_case_list.xml)"
print "-u: use the user name passed as argument"
......@@ -1278,7 +1283,9 @@ if MachineList =='':
MachineList = xmlRoot.findtext('MachineList',default='')
NFSResultsShare = xmlRoot.findtext('NFSResultsShare',default='')
GitOpenaircnRepo = xmlRoot.findtext('GitOpenair-cnRepo',default='')
GitOAI5GRepo = xmlRoot.findtext('GitOAI5GRepo',default='')
if GitOAI5GRepo == '':
GitOAI5GRepo = xmlRoot.findtext('GitOAI5GRepo',default='')
if GitOAI5GRepoBranch == '':
GitOAI5GRepoBranch = xmlRoot.findtext('GitOAI5GRepoBranch',default='')
......
This source diff could not be displayed because it is too large. You can view the blob instead.
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ASN_DEBUG False)
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( EMIT_ASN_DEBUG False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING True )
......@@ -47,9 +49,9 @@ set ( OAI_EMU False )
set ( OAISIM False )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 False )
set ( OPENAIR2 False )
set ( OPENAIR_LTE F )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "epc_test" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
......@@ -74,4 +76,4 @@ set ( SMBV False )
set ( TEST_OMG False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XER_PRINT True )
......@@ -30,7 +30,7 @@
################################################################################
# file build_helper
# brief
# author Laurent Thomas
# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
SUDO='sudo -E'
......@@ -269,7 +269,9 @@ check_install_oai_software() {
pydb \
wvdial \
python-numpy \
sshpass
sshpass \
libxslt1-dev
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
if [ `lsb_release -rs` = '12.04' ] ; then
install_nettle_from_source
......@@ -288,13 +290,15 @@ install_asn1c_from_source(){
asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
(
rm -rf /tmp/asn1c-r1516
$SUDO rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0
rm -rf /tmp/asn1c-r1516/*
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
./configure
make -j`nproc`
$SUDO make install
......@@ -324,7 +328,6 @@ install_nas_tools() {
}
################################
# set_openair_env
###############################
......@@ -397,4 +400,4 @@ if [[ $ip =~ ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ ]]; then
fi
return $stat
}
\ No newline at end of file
}
......@@ -22,7 +22,7 @@
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
......@@ -121,6 +121,7 @@ function main()
echo "Cleaning TEST_EPC"
fi
rm -f $OPENAIR_DIR/targets/bin/test_epc_generate_scenario
rm -f $OPENAIR_DIR/targets/bin/test_epc_play_scenario
rm -Rf build 2>&1
mkdir -m 777 -p -v build
fi
......@@ -140,6 +141,13 @@ function main()
compilations \
epc_test test_epc_generate_scenario \
test_epc_generate_scenario $dbin/test_epc_generate_scenario
compilations \
epc_test test_epc_play_scenario \
test_epc_play_scenario $dbin/test_epc_play_scenario
$SUDO cp -upv test_epc_generate_scenario /usr/local/bin
$SUDO cp -upv test_epc_play_scenario /usr/local/bin
}
......
......@@ -56,6 +56,7 @@ function help()
echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help."
echo_error " -e, --ulsch-max-errors num-errs maximum allowed number of uplink errors"
echo_error " -f, --rf-config-file filename RF specific configuration file"
echo_error " -K, --itti-dump-file filename ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
echo_error " -M, --target-dl-mcs mcs Downlink target MCS."
......@@ -138,6 +139,12 @@ function main()
shift;
exit 0
;;
-e | --ulsch-max-errors)
ulsch_max_errors=$2
echo "setting --ulsch-max-errors to $ulsch_max_errors"
exe_arguments="$exe_arguments --ulsch-max-errors=$ulsch_max_errors"
shift 2;
;;
-f | --rf-config-file)
rf_config_file=$2
# can omit file name if last arg on the line
......
......@@ -719,13 +719,13 @@ void phy_scope_UE(FD_lte_phy_scope_ue *form,
// PDSCH LLRs
if (pdsch_llr != NULL) {
for (i=0; i<coded_bits_per_codeword/4; i++) {
llr[i] = (float) pdsch_llr[4*i];
for (i=0; i<coded_bits_per_codeword; i++) {
llr[i] = (float) pdsch_llr[i];
bit[i] = (float) i;
}
fl_set_xyplot_xbounds(form->pdsch_llr,0,coded_bits_per_codeword/4);
fl_set_xyplot_data(form->pdsch_llr,bit,llr,coded_bits_per_codeword/4,"","","");
fl_set_xyplot_xbounds(form->pdsch_llr,0,coded_bits_per_codeword);
fl_set_xyplot_data(form->pdsch_llr,bit,llr,coded_bits_per_codeword,"","","");
}
// PDSCH I/Q of MF Output
......
......@@ -48,7 +48,19 @@ Description Contains global common definitions
#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
typedef signed char boolean_t;
#if !defined(TRUE)
#define TRUE (boolean_t)0x01
#endif
#if !defined(FALSE)
#define FALSE (boolean_t)0x00
#endif
#define BOOL_NOT(b) (b^TRUE)
#define NAS_UE_ID_FMT "0x%06x"
......@@ -59,13 +71,6 @@ Description Contains global common definitions
#define RETURNok (0)
#define RETURNerror (-1)
#ifndef FALSE
#define FALSE (0)
#endif
#ifndef TRUE
#define TRUE (1)
#endif
/*
* Name of the environment variable which defines the default directory
* where the NAS application is executed and where are located files
......
......@@ -112,7 +112,7 @@ typedef struct net_ip_address_s {
unsigned ipv4:1;
unsigned ipv6:1;
char ipv4_address[16];
char ipv6_address[40];
char ipv6_address[46];
} net_ip_address_t;
typedef uint64_t bitrate_t;
......
......@@ -265,7 +265,7 @@ static const eutra_band_t eutra_bands[] = {
Enb_properties_array_t enb_properties;
static void enb_config_display(void)
void enb_config_display(void)
{
int i,j;
......
......@@ -264,6 +264,7 @@ typedef struct Enb_properties_array_s {
Enb_properties_t *properties[MAX_ENB];
} Enb_properties_array_t;
void enb_config_display(void);
const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP);
const Enb_properties_array_t *enb_config_get(void);
......
......@@ -60,6 +60,8 @@
# include "DRB-ToAddModList.h"
# include "SRB-ToAddMod.h"
# include "SRB-ToAddModList.h"
# include "DRB-ToReleaseList.h"
#ifdef Rel10
#include "PMCH-InfoList-r9.h"
#endif
......
......@@ -51,10 +51,6 @@
#include "UTIL/OPT/opt.h"
/*----------------------------------------------------------------------------*/
#ifndef HAVE_STRNDUP
char * strndup (const char *s, size_t size);
#endif
static int oai_emulation_; /*!< \brief indicating that the parsing position is now within OAI_Emulation_*/
static int environment_system_config_; /*!< \brief indicating that the parsing position is now within Envi_Config_*/
......
This diff is collapsed.
This diff is collapsed.
......@@ -72,9 +72,9 @@ s1ap_eNB_config_t s1ap_config;
static int s1ap_eNB_generate_s1_setup_request(
s1ap_eNB_instance_t *instance_p, s1ap_eNB_mme_data_t *s1ap_mme_data_p);
static
void s1ap_eNB_handle_register_eNB(instance_t instance, s1ap_register_enb_req_t *s1ap_register_eNB);
static
void s1ap_eNB_handle_sctp_association_resp(instance_t instance, sctp_new_association_resp_t *sctp_new_association_resp);
uint32_t s1ap_generate_eNB_id(void)
......@@ -150,7 +150,7 @@ static void s1ap_eNB_register_mme(s1ap_eNB_instance_t *instance_p,
itti_send_msg_to_task(TASK_SCTP, instance_p->instance, message_p);
}
static
void s1ap_eNB_handle_register_eNB(instance_t instance, s1ap_register_enb_req_t *s1ap_register_eNB)
{
s1ap_eNB_instance_t *new_instance;
......@@ -210,7 +210,6 @@ void s1ap_eNB_handle_register_eNB(instance_t instance, s1ap_register_enb_req_t *
}
}
static
void s1ap_eNB_handle_sctp_association_resp(instance_t instance, sctp_new_association_resp_t *sctp_new_association_resp)
{
s1ap_eNB_instance_t *instance_p;
......
......@@ -100,6 +100,7 @@ static STAILQ_HEAD(sctp_cnx_list_head, sctp_cnx_list_elm_s) sctp_cnx_list;
static uint16_t sctp_nb_cnx = 0;
//------------------------------------------------------------------------------
struct sctp_cnx_list_elm_s *sctp_get_cnx(int32_t assoc_id, int sd)
{
struct sctp_cnx_list_elm_s *elm;
......@@ -119,6 +120,7 @@ struct sctp_cnx_list_elm_s *sctp_get_cnx(int32_t assoc_id, int sd)
return NULL;
}
//------------------------------------------------------------------------------
void
sctp_handle_new_association_req(
const instance_t instance,
......@@ -388,6 +390,7 @@ sctp_handle_new_association_req(
sd, sctp_nb_cnx, assoc_id);
}
//------------------------------------------------------------------------------
void sctp_send_data(
instance_t instance,
task_id_t task_id,
......@@ -430,6 +433,7 @@ void sctp_send_data(
sctp_cnx->assoc_id);
}
//------------------------------------------------------------------------------
static int sctp_close_association(
const instance_t instance,
const task_id_t requestor,
......@@ -456,6 +460,7 @@ static int sctp_close_association(
return 0;
}
//------------------------------------------------------------------------------
static int sctp_create_new_listener(
const instance_t instance,
const task_id_t requestor,
......@@ -580,6 +585,7 @@ err:
return -1;
}
//------------------------------------------------------------------------------
static inline
void
sctp_eNB_accept_associations(
......@@ -646,6 +652,7 @@ sctp_eNB_accept_associations(
}
}
//------------------------------------------------------------------------------
static inline
void
sctp_eNB_read_from_socket(
......@@ -770,6 +777,7 @@ sctp_eNB_read_from_socket(
}
}
//------------------------------------------------------------------------------
void
sctp_eNB_flush_sockets(
struct epoll_event *events, int nb_events)
......@@ -799,6 +807,7 @@ sctp_eNB_flush_sockets(
}
//------------------------------------------------------------------------------
void *sctp_eNB_task(void *arg)
{
int nb_events;
......
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "95";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 120;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -26;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.188.2.2";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);