Commit 1bcf1d41 authored by thomasl's avatar thomasl

revert my modifs that are redundant with the #undef USRP in lib_usrp.cpp

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6978 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent c2cb4326
## MySQL mandatory options
MYSQL_server = "@MYSQL_server@";
MYSQL_user = "@MYSQL_user@";
MYSQL_pass = "@MYSQL_pass@";
MYSQL_db = "@MYSQL_db@";
## HSS options
OPERATOR_key = "@OPERATOR_key@";
MYSQL_server = "127.0.0.1";
MYSQL_user = "hssadmin";
MYSQL_pass = "admin";
MYSQL_db = "oai_db";
## Freediameter options
FD_conf = "@FREEDIAMETER_PATH@/../etc/freeDiameter/hss_fd.conf";
FD_conf = "@AM_CONF_DIR@/hss_fd.conf";
......@@ -274,7 +274,7 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) {
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#else
#if !(defined(USRP) || defined(OAI_USRP))
#ifndef USRP
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
......
......@@ -49,7 +49,7 @@
#endif
extern int mac_get_rrc_status(uint8_t Mod_id,uint8_t eNB_flag,uint8_t index);
#if defined(USRP) || defined(EXMIMO) || defined(OAI_USRP)
#if defined(USRP) || defined(EXMIMO)
#include "common_lib.h"
extern openair0_config_t openair0_cfg[];
#endif
......@@ -84,7 +84,7 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
#ifdef EXMIMO
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB (LNA %d, vga %d dB)\n",phy_vars_ue->rx_total_gain_dB, openair0_cfg[0].rxg_mode[0],(int)openair0_cfg[0].rx_gain[0]);
#endif
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
len += sprintf(&buffer[len], "[UE PROC] RX Gain %d dB\n",phy_vars_ue->rx_total_gain_dB);
#endif
......
......@@ -130,7 +130,7 @@ int slot_fep(PHY_VARS_UE *phy_vars_ue,
memcpy((void *)tmp_dft_in,
(void *)&ue_common_vars->rxdata[aa][(rx_offset-nb_prefix_samples0) % frame_length_samples],
frame_parms->ofdm_symbol_size*sizeof(int));
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
rescale((int16_t *)tmp_dft_in,
frame_parms->ofdm_symbol_size);
#endif
......@@ -139,7 +139,7 @@ int slot_fep(PHY_VARS_UE *phy_vars_ue,
}
else {// use dft input from RX buffer directly
start_meas(&phy_vars_ue->rx_dft_stats);
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
rescale((int16_t *)&ue_common_vars->rxdata[aa][(rx_offset-nb_prefix_samples0) % frame_length_samples],
frame_parms->ofdm_symbol_size+nb_prefix_samples0);
#endif
......@@ -168,7 +168,7 @@ int slot_fep(PHY_VARS_UE *phy_vars_ue,
memcpy((void *)tmp_dft_in,
(void *)&ue_common_vars->rxdata[aa][(rx_offset) % frame_length_samples],
frame_parms->ofdm_symbol_size*sizeof(int));
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
rescale((int16_t *)tmp_dft_in,
frame_parms->ofdm_symbol_size);
#endif
......@@ -176,7 +176,7 @@ int slot_fep(PHY_VARS_UE *phy_vars_ue,
(int16_t *)&ue_common_vars->rxdataF[aa][frame_parms->ofdm_symbol_size*symbol],1);
}
else {// use dft input from RX buffer directly
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
rescale((int16_t *)&ue_common_vars->rxdata[aa][(rx_offset-nb_prefix_samples) % frame_length_samples],
frame_parms->ofdm_symbol_size+nb_prefix_samples);
#endif
......
......@@ -2403,7 +2403,7 @@ void phy_procedures_eNB_TX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
#endif
#ifndef EXMIMO
#if !(defined(USRP) || defined(OAI_USRP))
#ifndef USRP
if (abstraction_flag==0) {
start_meas(&phy_vars_eNB->ofdm_mod_stats);
do_OFDM_mod(phy_vars_eNB->lte_eNB_common_vars.txdataF[0],
......
......@@ -122,7 +122,7 @@ extern int rx_sig_fifo;
#endif
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
#endif
......@@ -192,7 +192,7 @@ void dump_dlsch_SI(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t subframe) {
exit(-1);
}
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
unsigned int prach_gain_table[31] = {100,112,126,141,158,178,200,224,251,282,316,359,398,447,501,562,631,708,794,891,1000,1122,1258,1412,1585,1778,1995,2239,2512,2818,3162};
unsigned int get_tx_amp(int power_dBm, int power_max_dBm) {
......@@ -608,7 +608,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
uint8_t ack_status=0;
int8_t Po_PUCCH;
int32_t ulsch_start=0;
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
int overflow=0;
int k,l;
#endif
......@@ -906,7 +906,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
LOG_D(PHY,"[UE %d][PUSCH %d] Frame %d subframe %d, generating PUSCH, Po_PUSCH: %d dBm, amp %d\n",
Mod_id,harq_pid,frame_tx,subframe_tx,phy_vars_ue->tx_power_dBm,
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(phy_vars_ue->tx_power_dBm,phy_vars_ue->tx_power_max_dBm)
#else
AMP
......@@ -914,7 +914,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
);
start_meas(&phy_vars_ue->ulsch_modulation_stats);
ulsch_modulation(phy_vars_ue->lte_ue_common_vars.txdataF,
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(phy_vars_ue->tx_power_dBm,phy_vars_ue->tx_power_max_dBm),
#else
AMP,
......@@ -924,7 +924,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
&phy_vars_ue->lte_frame_parms,
phy_vars_ue->ulsch_ue[eNB_id]);
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
for (aa=0; aa<1/*frame_parms->nb_antennas_tx*/; aa++)
generate_drs_pusch(phy_vars_ue,eNB_id,get_tx_amp(phy_vars_ue->tx_power_dBm,phy_vars_ue->tx_power_max_dBm),subframe_tx,first_rb,nb_rb,aa);
#else
......@@ -1012,7 +1012,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
frame_tx, subframe_tx,
phy_vars_ue->scheduling_request_config[eNB_id].sr_PUCCH_ResourceIndex,
Po_PUCCH,
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(Po_PUCCH,phy_vars_ue->tx_power_max_dBm)
#else
AMP
......@@ -1026,7 +1026,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
frame_tx, subframe_tx,
n1_pucch,pucch_ack_payload[0],pucch_ack_payload[1],SR_payload,
Po_PUCCH,
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(Po_PUCCH,phy_vars_ue->tx_power_max_dBm)
#else
AMP
......@@ -1045,7 +1045,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
0, // n2_pucch
1, // shortened format
pucch_ack_payload,
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(Po_PUCCH,phy_vars_ue->tx_power_max_dBm),
#else
AMP,
......@@ -1093,7 +1093,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
0, // n2_pucch
1, // shortened format
pucch_ack_payload, // this is ignored anyway, we just need a pointer
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
get_tx_amp(Po_PUCCH,phy_vars_ue->tx_power_max_dBm),
#else
AMP,
......@@ -1169,7 +1169,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
if (abstraction_flag == 0) {
nsymb = (frame_parms->Ncp == 0) ? 14 : 12;
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP) //this is the EXPRESS MIMO case
ulsch_start = (phy_vars_ue->rx_offset+subframe_tx*frame_parms->samples_per_tti-
openair_daq_vars.timing_advance-
phy_vars_ue->timing_advance-
......@@ -1191,7 +1191,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
for (aa=0; aa<frame_parms->nb_antennas_tx; aa++) {
if (frame_parms->Ncp == 1)
PHY_ofdm_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
dummy_tx_buffer,
#else
&phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start],
......@@ -1204,7 +1204,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
CYCLIC_PREFIX);
else
normal_prefix_mod(&phy_vars_ue->lte_ue_common_vars.txdataF[aa][subframe_tx*nsymb*frame_parms->ofdm_symbol_size],
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
dummy_tx_buffer,
#else
&phy_vars_ue->lte_ue_common_vars.txdata[aa][ulsch_start],
......@@ -1225,7 +1225,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
}
*/
#ifndef OFDMA_ULSCH
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,0);
apply_7_5_kHz(phy_vars_ue,dummy_tx_buffer,1);
#else
......@@ -1240,7 +1240,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
*/
#endif
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
overflow = ulsch_start - 9*frame_parms->samples_per_tti;
//if ((slot_tx==4) && (aa==0)) printf("ulsch_start %d, overflow %d\n",ulsch_start,overflow);
for (k=ulsch_start,l=0; k<cmin(frame_parms->samples_per_tti*LTE_NUMBER_OF_SUBFRAMES_PER_FRAME,ulsch_start+frame_parms->samples_per_tti); k++,l++)
......@@ -1317,7 +1317,7 @@ void phy_procedures_UE_TX(PHY_VARS_UE *phy_vars_ue,uint8_t eNB_id,uint8_t abstra
phy_vars_ue->tx_total_RE = 96;
#if defined(EXMIMO) || defined(USRP) || defined(OAI_USRP)
#if defined(EXMIMO) || defined(USRP)
phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp = get_tx_amp(phy_vars_ue->tx_power_dBm,phy_vars_ue->tx_power_max_dBm);
#else
phy_vars_ue->lte_ue_prach_vars[eNB_id]->amp = AMP;
......@@ -1509,7 +1509,7 @@ void lte_ue_measurement_procedures(uint16_t l, PHY_VARS_UE *phy_vars_ue,uint8_t
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id],0);
#else
#if !(defined(USRP) || defined(OAI_USRP))
#ifndef USRP
phy_adjust_gain (phy_vars_ue,0);
#endif
#endif
......@@ -3454,7 +3454,7 @@ void phy_UE_lte_check_measurement_thresholds(instance_t instanceP, ral_threshold
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_LTE,1);
#if defined(EXMIMO)
#if !(defined(USRP) || defined(OAI_USRP))
#ifndef USRP
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX, *((volatile unsigned int *) openair0_exmimo_pci[0].rxcnt_ptr[0]));
#endif
#endif
......
......@@ -1769,7 +1769,7 @@ static void get_options (int argc, char **argv) {
// char line[1000];
// int l;
int k,i;//,j,k;
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
int clock_src;
#endif
int CC_id;
......@@ -1953,7 +1953,7 @@ static void get_options (int argc, char **argv) {
}
break;
case 's':
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
clock_src = atoi(optarg);
if (clock_src == 0) {
......
......@@ -257,7 +257,7 @@ static void *UE_thread_synch(void *arg) {
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i];
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i];
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB-USRP_GAIN_OFFSET;
switch(UE->lte_frame_parms.N_RB_DL) {
case 6:
......@@ -280,7 +280,7 @@ static void *UE_thread_synch(void *arg) {
//openair0_config(&openair0_cfg[card],1);
#endif
}
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
#ifndef USRP_DEBUG
openair0_set_rx_frequencies(&openair0,&openair0_cfg[0]);
openair0_set_gains(&openair0,&openair0_cfg[0]);
......@@ -336,7 +336,7 @@ static void *UE_thread_synch(void *arg) {
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i]+openair_daq_vars.freq_offset;
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i]+openair_daq_vars.freq_offset;
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB-USRP_GAIN_OFFSET; // 65 calibrated for USRP B210 @ 2.6 GHz
switch(UE->lte_frame_parms.N_RB_DL) {
case 6:
......@@ -360,7 +360,7 @@ static void *UE_thread_synch(void *arg) {
//openair0_config(&openair0_cfg[card],1);
#endif
}
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
#ifndef USRP_DEBUG
openair0_set_rx_frequencies(&openair0,&openair0_cfg[0]);
// openair0_set_gains(&openair0,&openair0_cfg[0]);
......@@ -422,7 +422,7 @@ static void *UE_thread_synch(void *arg) {
for (i=0; i<openair0_cfg[card].rx_num_channels; i++) {
openair0_cfg[card].rx_freq[i] = downlink_frequency[card][i]+openair_daq_vars.freq_offset;
openair0_cfg[card].tx_freq[i] = downlink_frequency[card][i]+uplink_frequency_offset[card][i]+openair_daq_vars.freq_offset;
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
openair0_cfg[card].rx_gain[i] = UE->rx_total_gain_dB-USRP_GAIN_OFFSET; // 65 calibrated for USRP B210 @ 2.6 GHz
switch(UE->lte_frame_parms.N_RB_DL) {
......@@ -447,7 +447,7 @@ static void *UE_thread_synch(void *arg) {
//rt_sleep_ns(FRAME_PERIOD);
#endif
}
#if defined(USRP) || defined(OAI_USRP)
#ifdef USRP
#ifndef USRP_DEBUG
openair0_set_frequencies(&openair0,&openair0_cfg[0]);
// openair0_set_gains(&openair0,&openair0_cfg[0]);
......@@ -1405,7 +1405,7 @@ void *UE_thread(void *arg) {
}
else {
// LOG_I(PHY,"[initial_sync] trying carrier off %d Hz\n",openair_daq_vars.freq_offset);
#if !(defined(USRP) || defined(OAI_USRP))
#ifndef USRP
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
for (i=0; i<openair0_cfg[rf_map[CC_id].card].rx_num_channels; i++)
openair0_cfg[rf_map[CC_id].card].rx_freq[rf_map[CC_id].chain+i] = downlink_frequency[CC_id][i]+openair_daq_vars.freq_offset;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment