Commit 25a136af authored by Hongzhi Wang's avatar Hongzhi Wang

ue adding pdsch procedure

parent e6623c7d
Pipeline #10294 failed with stage
in 0 seconds
......@@ -376,6 +376,7 @@ int init_frame_parms(LTE_DL_FRAME_PARMS *frame_parms,uint8_t osf);
void dump_frame_parms(LTE_DL_FRAME_PARMS *frame_parms);
int nr_init_frame_parms(nfapi_nr_config_request_t* config, NR_DL_FRAME_PARMS *frame_parms);
int nr_init_frame_parms_ue(NR_DL_FRAME_PARMS *frame_parms);
int init_nr_ue_signal(PHY_VARS_NR_UE *ue,int nb_connected_eNB,uint8_t abstraction_flag);
void nr_dump_frame_parms(NR_DL_FRAME_PARMS *frame_parms);
int phy_init_nr_gNB(PHY_VARS_gNB *gNB, unsigned char is_secondary_gNB, unsigned char abstraction_flag);
void nr_phy_config_request(NR_PHY_Config_t *gNB);
......
......@@ -215,7 +215,7 @@ int nr_initial_sync(PHY_VARS_NR_UE *ue, runmode_t mode)
else
ue->rx_offset = FRAME_LENGTH_COMPLEX_SAMPLES + sync_pos2 - sync_pos_slot;
printf("sync_pos %d sync_pos_slot %d rx_offset\n",sync_pos,sync_pos_slot, ue->rx_offset);
printf("sync_pos %d sync_pos_slot %d rx_offset %d\n",sync_pos,sync_pos_slot, ue->rx_offset);
// write_output("rxdata1.m","rxd1",ue->common_vars.rxdata[0],10*frame_parms->samples_per_tti,1,1);
......
......@@ -1352,24 +1352,6 @@ int dump_dci(NR_DL_FRAME_PARMS *frame_parms, DCI_ALLOC_t *dci);
int dump_ue_stats(PHY_VARS_NR_UE *phy_vars_ue, UE_nr_rxtx_proc_t *proc, char* buffer, int length, runmode_t mode, int input_level_dBm);
void generate_pcfich_reg_mapping(NR_DL_FRAME_PARMS *frame_parms);
void pcfich_unscrambling(NR_DL_FRAME_PARMS *frame_parms,
uint8_t subframe,
int16_t *d);
uint8_t rx_pcfich(NR_DL_FRAME_PARMS *frame_parms,
uint8_t subframe,
NR_UE_PDCCH *lte_ue_pdcch_vars,
MIMO_mode_t mimo_mode);
void generate_phich_reg_mapping(NR_DL_FRAME_PARMS *frame_parms);
void init_transport_channels(uint8_t);
void generate_RIV_tables(void);
......@@ -1381,7 +1363,7 @@ void generate_RIV_tables(void);
parameters are know, the routine calls some basic initialization routines (cell-specific reference signals, etc.)
@param phy_vars_ue Pointer to UE variables
*/
int initial_sync(PHY_VARS_NR_UE *phy_vars_ue, runmode_t mode);
int nr_initial_sync(PHY_VARS_NR_UE *phy_vars_ue, runmode_t mode);
/*!
......
......@@ -123,7 +123,7 @@ void phy_procedures_UE_TX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eNB
@param r_type indicates the relaying operation: 0: no_relaying, 1: unicast relaying type 1, 2: unicast relaying type 2, 3: multicast relaying
@param phy_vars_rn pointer to RN variables
*/
int phy_procedures_UE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type);
int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type);
int phy_procedures_slot_parallelization_UE_RX(PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *proc,uint8_t eNB_id,uint8_t abstraction_flag,uint8_t do_pdcch_flag,runmode_t mode,relaying_type_t r_type);
#ifdef UE_SLOT_PARALLELISATION
......
This diff is collapsed.
......@@ -42,6 +42,8 @@
#include "fapi_nr_ue_l1.h"
#include "PHY/phy_extern_nr_ue.h"
#include "PHY/INIT/phy_init.h"
#include "PHY/MODULATION/modulation_UE.h"
#include "LAYER2/NR_MAC_UE/mac_proto.h"
#include "RRC/NR_UE/rrc_proto.h"
......@@ -331,7 +333,7 @@ static void *UE_thread_synch(void *arg) {
switch (sync_mode) {
case pss:
LOG_I(PHY,"[SCHED][UE] Scanning band %d (%d), freq %u\n",bands_to_scan.band_info[current_band].band, current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
lte_sync_timefreq(UE,current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
//lte_sync_timefreq(UE,current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
current_offset += 20000000; // increase by 20 MHz
if (current_offset > bands_to_scan.band_info[current_band].dl_max-bands_to_scan.band_info[current_band].dl_min) {
......@@ -425,7 +427,7 @@ static void *UE_thread_synch(void *arg) {
//UE->rfdevice.trx_set_gains_func(&openair0,&openair0_cfg[0]);
//UE->rfdevice.trx_stop_func(&UE->rfdevice);
// sleep(1);
nr_init_frame_parms_ue(config,&UE->frame_parms);
nr_init_frame_parms_ue(&UE->frame_parms);
/*if (UE->rfdevice.trx_start_func(&UE->rfdevice) != 0 ) {
LOG_E(HW,"Could not start the device\n");
oai_exit=1;
......@@ -614,7 +616,7 @@ static void *UE_thread_rxn_txnp4(void *arg) {
#ifdef UE_SLOT_PARALLELISATION
phy_procedures_slot_parallelization_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#else
phy_procedures_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
phy_procedures_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#endif
}
......@@ -1099,7 +1101,7 @@ void fill_ue_band_info(void) {
int setup_ue_buffers(PHY_VARS_NR_UE **phy_vars_ue, openair0_config_t *openair0_cfg) {
int i, CC_id;
LTE_DL_FRAME_PARMS *frame_parms;
NR_DL_FRAME_PARMS *frame_parms;
openair0_rf_map *rf_map;
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment