Commit 26e4747f authored by jiangx's avatar jiangx

changing a few logs


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6733 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 948163b5
......@@ -125,27 +125,27 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
if (eNB_id > 2) {
msg("dlsch_demodulation.c: Illegal eNB_id %d\n",eNB_id);
LOG_W(PHY,"dlsch_demodulation.c: Illegal eNB_id %d\n",eNB_id);
return(-1);
}
if (!lte_ue_common_vars) {
msg("dlsch_demodulation.c: Null lte_ue_common_vars\n");
LOG_W(PHY,"dlsch_demodulation.c: Null lte_ue_common_vars\n");
return(-1);
}
if (!dlsch_ue[0]) {
msg("dlsch_demodulation.c: Null dlsch_ue pointer\n");
LOG_W(PHY,"dlsch_demodulation.c: Null dlsch_ue pointer\n");
return(-1);
}
if (!lte_ue_pdsch_vars) {
msg("dlsch_demodulation.c: Null lte_ue_pdsch_vars pointer\n");
LOG_W(PHY,"dlsch_demodulation.c: Null lte_ue_pdsch_vars pointer\n");
return(-1);
}
if (!frame_parms) {
msg("dlsch_demodulation.c: Null lte_frame_parms\n");
LOG_W(PHY,"dlsch_demodulation.c: Null lte_frame_parms\n");
return(-1);
}
// printf("rx_dlsch subframe %d symbol %d: eNB_id %d, eNB_id_i %d, dual_stream_flag %d\n",subframe,symbol,eNB_id,eNB_id_i,dual_stream_flag);
......@@ -244,7 +244,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
// printf("nb_rb = %d, eNB_id %d\n",nb_rb,eNB_id);
if (nb_rb==0) {
msg("dlsch_demodulation.c: nb_rb=0\n");
LOG_W(PHY,"dlsch_demodulation.c: nb_rb=0\n");
return(-1);
}
/*
......@@ -262,7 +262,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
symbol,
nb_rb);
#ifdef DEBUG_PHY
msg("[DLSCH] avg[0] %d\n",avg[0]);
LOG_D(PHY,"[DLSCH] avg[0] %d\n",avg[0]);
#endif
// the channel gain should be the effective gain of precoding + channel
......@@ -299,8 +299,8 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
*/
#ifdef DEBUG_PHY
msg("[DLSCH] log2_maxh = %d (%d,%d)\n",lte_ue_pdsch_vars[eNB_id]->log2_maxh,avg[0],avgs);
msg("[DLSCH] mimo_mode = %d\n", dlsch0_harq->mimo_mode);
LOG_D(PHY,"[DLSCH] log2_maxh = %d (%d,%d)\n",lte_ue_pdsch_vars[eNB_id]->log2_maxh,avg[0],avgs);
LOG_D(PHY,"[DLSCH] mimo_mode = %d\n", dlsch0_harq->mimo_mode);
#endif
}
aatx = frame_parms->nb_antennas_tx_eNB;
......@@ -368,7 +368,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
frame_parms,
avg, symbol, nb_rb);
// msg("llr_offset = %d\n",offset_mumimo_llr_drange[dlsch0_harq->mcs][(dlsch1_harq->mcs>>1)-1]);
// LOG_D(PHY,"llr_offset = %d\n",offset_mumimo_llr_drange[dlsch0_harq->mcs][(dlsch1_harq->mcs>>1)-1]);
avg[0] = log2_approx(avg[0]) - 13 + offset_mumimo_llr_drange[dlsch0_harq->mcs][(get_Qm(dlsch1_harq->mcs)>>1)-1];
lte_ue_pdsch_vars[eNB_id]->log2_maxh = cmax(avg[0],0);
......@@ -424,7 +424,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
// effective channel of desired user is always stronger than interfering eff. channel
dlsch_channel_level_TM56(lte_ue_pdsch_vars[eNB_id]->dl_ch_estimates_ext, frame_parms, lte_ue_pdsch_vars[eNB_id]->pmi_ext, avg, symbol, nb_rb);
// msg("llr_offset = %d\n",offset_mumimo_llr_drange[dlsch0_harq->mcs][(i_mod>>1)-1]);
// LOG_D(PHY,"llr_offset = %d\n",offset_mumimo_llr_drange[dlsch0_harq->mcs][(i_mod>>1)-1]);
avg[0] = log2_approx(avg[0]) - 13 + offset_mumimo_llr_drange[dlsch0_harq->mcs][(i_mod>>1)-1];
lte_ue_pdsch_vars[eNB_id]->log2_maxh = cmax(avg[0],0);
......@@ -579,7 +579,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
}
else {
msg("dlsch_rx: Unknown MIMO mode\n");
LOG_W(PHY,"dlsch_rx: Unknown MIMO mode\n");
return (-1);
}
......@@ -775,7 +775,7 @@ int rx_pdsch(PHY_VARS_UE *phy_vars_ue,
}
break;
default:
msg("rx_dlsch.c : Unknown mod_order!!!!\n");
LOG_W(PHY,"rx_dlsch.c : Unknown mod_order!!!!\n");
return(-1);
break;
}
......@@ -1901,7 +1901,7 @@ void dlsch_scale_channel(int **dl_ch_estimates_ext,
// Determine scaling amplitude based the symbol
ch_amp = ((pilots) ? (dlsch_ue[0]->sqrt_rho_b) : (dlsch_ue[0]->sqrt_rho_a));
// msg("Scaling PDSCH Chest in OFDM symbol %d by %d\n",symbol_mod,ch_amp);
// LOG_D(PHY,"Scaling PDSCH Chest in OFDM symbol %d by %d\n",symbol_mod,ch_amp);
ch_amp128 = _mm_set1_epi16(ch_amp); // Q3.13
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment