Commit 4deb6663 authored by Calvin HSU's avatar Calvin HSU

UE: Add DCI interpretation in L2, finish part of the DL_CONFIG_REQ for L1 DL-SCH procedures.

parent 9e86d7cb
Pipeline #10316 failed with stage
in 0 seconds
......@@ -49,5 +49,9 @@
/// UL_CONFIG_REQ
#define FAPI_NR_UL_CONFIG_LIST_NUM 10
#define FAPI_NR_DL_CONFIG_TYPE_PRACH 0x01
#define FAPI_NR_DL_CONFIG_TYPE_PUCCH 0x02
#define FAPI_NR_DL_CONFIG_TYPE_PUSCH 0x03
#endif
\ No newline at end of file
......@@ -103,6 +103,8 @@ typedef struct {
uint8_t reserved_nr_dci ; // 55 RESERVED_NR_DCI
} fapi_nr_dci_pdu_rel15_t;
typedef struct {
uint8_t uci_format;
uint8_t uci_channel;
......@@ -147,7 +149,7 @@ typedef struct {
typedef struct {
uint16_t rnti;
uint8_t dci_type;
uint8_t dci_format;
fapi_nr_dci_pdu_rel15_t dci;
} fapi_nr_dci_indication_pdu_t;
......@@ -187,13 +189,13 @@ typedef struct {
fapi_nr_mib_pdu_t mib_pdu;
fapi_nr_sib_pdu_t sib_pdu;
};
} fapi_nr_rx_request_body_t;
} fapi_nr_rx_indication_body_t;
///
typedef struct {
uint32_t sfn_slot;
uint16_t number_pdus;
fapi_nr_rx_request_body_t *rx_request_body;
fapi_nr_rx_indication_body_t *rx_indication_body;
} fapi_nr_rx_indication_t;
typedef struct {
......@@ -224,11 +226,25 @@ typedef struct {
} fapi_nr_ul_config_pucch_pdu;
typedef struct {
uint16_t number_rbs;
uint16_t start_rb;
uint16_t number_symbols;
uint16_t start_symbol;
uint8_t mcs;
} fapi_nr_ul_config_pusch_pdu_rel15_t;
typedef struct {
uint16_t rnti;
fapi_nr_ul_config_pusch_pdu_rel15_t ulsch_pdu_rel15;
} fapi_nr_ul_config_pusch_pdu;
typedef struct {
uint8_t pdu_type;
union {
fapi_nr_ul_config_rach_pdu rach_pdu;
fapi_nr_ul_config_pucch_pdu pucch_pdu;
fapi_nr_ul_config_rach_pdu prach_config_pdu;
fapi_nr_ul_config_pucch_pdu pucch_config_pdu;
fapi_nr_ul_config_pusch_pdu ulsch_config_pdu;
};
} fapi_nr_ul_config_request_pdu_t;
......@@ -257,7 +273,16 @@ typedef struct {
fapi_nr_dl_config_dci_dl_pdu_rel15_t dci_config_rel15;
} fapi_nr_dl_config_dci_pdu;
typedef fapi_nr_dci_pdu_rel15_t fapi_nr_dl_config_dlsch_pdu_rel15_t;
//typedef fapi_nr_dci_pdu_rel15_t fapi_nr_dl_config_dlsch_pdu_rel15_t;
typedef struct {
uint16_t number_rbs;
uint16_t start_rb;
uint16_t number_symbols;
uint16_t start_symbol;
uint8_t mcs;
uint8_t rv;
// to be check the fields needed to L1 with NR_DL_UE_HARQ_t and NR_UE_DLSCH_t
} fapi_nr_dl_config_dlsch_pdu_rel15_t;
typedef struct {
uint16_t rnti;
......
......@@ -703,13 +703,13 @@ int nr_rx_pbch( PHY_VARS_NR_UE *ue,
ue->dl_indication.rx_ind = &ue->rx_ind; // hang on rx_ind instance
//ue->rx_ind.sfn_slot = 0; //should be set by higher-1-layer, i.e. clean_and_set_if_instance()
ue->rx_ind.number_pdus = ue->rx_ind.number_pdus + 1;
ue->rx_ind.rx_request_body = (fapi_nr_rx_request_body_t *)malloc(sizeof(fapi_nr_rx_request_body_t));
ue->rx_ind.rx_request_body->pdu_type = FAPI_NR_RX_PDU_TYPE_MIB;
ue->rx_ind.rx_request_body->mib_pdu.pdu = &decoded_output[1];
ue->rx_ind.rx_request_body->mib_pdu.additional_bits = decoded_output[0];
ue->rx_ind.rx_request_body->mib_pdu.ssb_index = ssb_index; // confirm with TCL
ue->rx_ind.rx_request_body->mib_pdu.ssb_length = Lmax; // confirm with TCL
ue->rx_ind.rx_request_body->mib_pdu.cell_id = frame_parms->Nid_cell; // confirm with TCL
ue->rx_ind.rx_indication_body = (fapi_nr_rx_indication_body_t *)malloc(sizeof(fapi_nr_rx_indication_body_t));
ue->rx_ind.rx_indication_body->pdu_type = FAPI_NR_RX_PDU_TYPE_MIB;
ue->rx_ind.rx_indication_body->mib_pdu.pdu = &decoded_output[1];
ue->rx_ind.rx_indication_body->mib_pdu.additional_bits = decoded_output[0];
ue->rx_ind.rx_indication_body->mib_pdu.ssb_index = ssb_index; // confirm with TCL
ue->rx_ind.rx_indication_body->mib_pdu.ssb_length = Lmax; // confirm with TCL
ue->rx_ind.rx_indication_body->mib_pdu.cell_id = frame_parms->Nid_cell; // confirm with TCL
ue->if_inst->dl_indication(&ue->dl_indication);
......
......@@ -282,6 +282,12 @@ typedef struct {
uint32_t G;
/// Current Number of RBs
uint16_t nb_rb;
/// Starting RB number
uint16_t start_rb;
/// Number of Symbols
uint16_t nb_symbols;
/// Starting Symbol number
uint16_t start_symbol;
/// Current subband PMI allocation
uint16_t pmi_alloc;
/// Current RB allocation (even slots)
......
......@@ -3508,10 +3508,8 @@ int nr_ue_pdcch_procedures(uint8_t eNB_id,PHY_VARS_NR_UE *ue,UE_nr_rxtx_proc_t *
crc_scrambled_values,
&nr_dci_info_extracted);
//ue->dci_ind.dci_list = (fapi_nr_dci_indication_pdu_t *)malloc(num_dci * sizeof(fapi_nr_dci_indication_pdu_t));
ue->dci_ind.dci_list[i].rnti = 0x0000;
ue->dci_ind.dci_list[i].dci_type = 0;
ue->dci_ind.dci_list[i].rnti = dci_alloc_rx[i].rnti;
ue->dci_ind.dci_list[i].dci_format = dci_alloc_rx[i].format;
memcpy(&ue->dci_ind.dci_list[i].dci, &nr_dci_info_extracted, sizeof(fapi_nr_dci_pdu_rel15_t) );
// TODO: check where should we send up this message.
......
......@@ -30,7 +30,7 @@
* \warning
*/
// Type0-PDCCH search space
extern const int32_t table_38213_13_1_c2[16];
extern const int32_t table_38213_13_1_c3[16];
extern const int32_t table_38213_13_1_c4[16];
......@@ -80,4 +80,10 @@ extern const float table_38213_13_12_c1[16];
extern const int32_t table_38213_13_12_c2[16];
extern const float table_38213_13_12_c3[16];
extern const int32_t table_38213_10_1_1_c2[5];
\ No newline at end of file
extern const int32_t table_38213_10_1_1_c2[5];
// DCI extraction
// for PUSCH from TS 38.214 subclause 6.1.2.1.1
extern uint8_t table_6_1_2_1_1_2_time_dom_res_alloc_A[16][3];
// for PDSCH from TS 38.214 subclause 5.1.2.1.1
extern uint8_t table_5_1_2_1_1_2_time_dom_res_alloc_A[16][3];
\ No newline at end of file
......@@ -113,7 +113,7 @@ uint32_t ue_get_SR(module_id_t module_idP, int CC_id, frame_t frameP,
uint8_t eNB_id, rnti_t rnti, sub_frame_t subframe);
int8_t nr_ue_process_dci(module_id_t module_id, int cc_id, uint8_t gNB_index, fapi_nr_dci_pdu_rel15_t *dci, uint16_t rnti, uint32_t dci_type);
int8_t nr_ue_process_dci(module_id_t module_id, int cc_id, uint8_t gNB_index, fapi_nr_dci_pdu_rel15_t *dci, uint16_t rnti, uint32_t dci_format);
uint32_t get_ssb_frame(uint32_t test);
uint32_t get_ssb_slot(uint32_t ssb_index);
......
......@@ -88,4 +88,47 @@ const float table_38213_13_12_c1[16] = { 0, 0, 2.5f, 2.5f, 5, 5, 0, 2.5f, 5, 7
const int32_t table_38213_13_12_c2[16] = { 1, 2, 1, 2, 1, 2, 2, 2, 2, 1, 2, 2, 1, 1, reserved, reserved}; // index 14-15 reserved
const float table_38213_13_12_c3[16] = { 1, 0.5f, 1, 0.5f, 1, 0.5f, 0.5f, 0.5f, 0.5f, 1, 0.5f, 0.5f, 1, 1, reserved, reserved}; // M, index 14-15 reserved
const int32_t table_38213_10_1_1_c2[5] = { 0, 0, 4, 2, 1 };
\ No newline at end of file
const int32_t table_38213_10_1_1_c2[5] = { 0, 0, 4, 2, 1 };
#define mu_pusch 1
// definition table j Table 6.1.2.1.1-4
#define j ((mu_pusch==3)?3:(mu_pusch==2)?2:1)
uint8_t table_6_1_2_1_1_2_time_dom_res_alloc_A[16][3]={ // for PUSCH from TS 38.214 subclause 6.1.2.1.1
{j, 0,14}, // row index 1
{j, 0,12}, // row index 2
{j, 0,10}, // row index 3
{j, 2,10}, // row index 4
{j, 4,10}, // row index 5
{j, 4,8}, // row index 6
{j, 4,6}, // row index 7
{j+1,0,14}, // row index 8
{j+1,0,12}, // row index 9
{j+1,0,10}, // row index 10
{j+2,0,14}, // row index 11
{j+2,0,12}, // row index 12
{j+2,0,10}, // row index 13
{j, 8,6}, // row index 14
{j+3,0,14}, // row index 15
{j+3,0,10} // row index 16
};
#define dmrs_typeA_pos 2
uint8_t table_5_1_2_1_1_2_time_dom_res_alloc_A[16][3]={ // for PDSCH from TS 38.214 subclause 5.1.2.1.1
{0,(dmrs_typeA_pos == 2)?2:3, (dmrs_typeA_pos == 2)?12:11}, // row index 1
{0,(dmrs_typeA_pos == 2)?2:3, (dmrs_typeA_pos == 2)?10:9}, // row index 2
{0,(dmrs_typeA_pos == 2)?2:3, (dmrs_typeA_pos == 2)?9:8}, // row index 3
{0,(dmrs_typeA_pos == 2)?2:3, (dmrs_typeA_pos == 2)?7:6}, // row index 4
{0,(dmrs_typeA_pos == 2)?2:3, (dmrs_typeA_pos == 2)?5:4}, // row index 5
{0,(dmrs_typeA_pos == 2)?9:10,(dmrs_typeA_pos == 2)?4:4}, // row index 6
{0,(dmrs_typeA_pos == 2)?4:6, (dmrs_typeA_pos == 2)?4:4}, // row index 7
{0,5,7}, // row index 8
{0,5,2}, // row index 9
{0,9,2}, // row index 10
{0,12,2}, // row index 11
{0,1,13}, // row index 12
{0,1,6}, // row index 13
{0,2,4}, // row index 14
{0,4,7}, // row index 15
{0,8,4} // row index 16
};
\ No newline at end of file
......@@ -34,6 +34,7 @@
#include "mac_extern.h"
#include "RRC/NR_UE/rrc_proto.h"
#include "assertions.h"
#include "PHY/defs_nr_UE.h"
#include <stdio.h>
#include <math.h>
......@@ -83,7 +84,7 @@ int8_t nr_ue_decode_mib(
}
}
#if 0
#ifdef DEBUG_MIB
printf("system frame number(6 MSB bits): %d\n", mac->mib->systemFrameNumber.buf[0]);
printf("system frame number(with LSB): %d\n", (int)frame);
printf("subcarrier spacing: %d\n", (int)mac->mib->subCarrierSpacingCommon);
......@@ -269,12 +270,8 @@ int8_t nr_ue_decode_mib(
uint32_t first_symbol_index;
uint32_t search_space_duration; // element of search space
uint32_t coreset_duration; // element of coreset
// 38.213 table 10.1-1
/// MUX PATTERN 1
if(mac->type0_pdcch_ss_mux_pattern == 1 && frequency_range == FR1){
......@@ -315,7 +312,6 @@ int8_t nr_ue_decode_mib(
search_space_duration = 2;
}
/// MUX PATTERN 2
if(mac->type0_pdcch_ss_mux_pattern == 2){
......@@ -423,7 +419,6 @@ int8_t nr_ue_decode_mib(
mac->type0_pdcch_ss_sfn_c = sfn_c;
mac->type0_pdcch_ss_n_c = n_c;
// fill in the elements in config request inside P5 message
mac->phy_config.config_req.pbch_config.system_frame_number = frame; // after calculation
mac->phy_config.config_req.pbch_config.subcarrier_spacing_common = mac->mib->subCarrierSpacingCommon;
......@@ -543,9 +538,137 @@ NR_UE_L2_STATE_t nr_ue_scheduler(
return CONNECTION_OK;
}
int8_t nr_ue_process_dci(module_id_t module_id, int cc_id, uint8_t gNB_index, fapi_nr_dci_pdu_rel15_t *dci, uint16_t rnti, uint32_t dci_type){
int8_t nr_ue_process_dci(module_id_t module_id, int cc_id, uint8_t gNB_index, fapi_nr_dci_pdu_rel15_t *dci, uint16_t rnti, uint32_t dci_format){
NR_UE_MAC_INST_t *mac = get_mac_inst(module_id);
fapi_nr_dl_config_request_t *dl_config = &mac->dl_config_request;
fapi_nr_ul_config_request_t *ul_config = &mac->ul_config_request;
const uint16_t n_RB_ULBWP = 106;
const uint16_t n_RB_DLBWP = 106;
uint32_t k_offset;
uint32_t sliv_S;
uint32_t sliv_L;
uint32_t l_RB;
uint32_t start_RB;
uint32_t tmp_RIV;
switch(dci_format){
case format0_0:
/* TIME_DOM_RESOURCE_ASSIGNMENT */
// 0, 1, 2, 3, or 4 bits as defined in:
// Subclause 6.1.2.1 of [6, TS 38.214] for formats format0_0,format0_1
// Subclause 5.1.2.1 of [6, TS 38.214] for formats format1_0,format1_1
// The bitwidth for this field is determined as log2(I) bits,
// where I the number of entries in the higher layer parameter pusch-AllocationList
k_offset = table_6_1_2_1_1_2_time_dom_res_alloc_A[dci->time_dom_resource_assignment][0];
sliv_S = table_6_1_2_1_1_2_time_dom_res_alloc_A[dci->time_dom_resource_assignment][1];
sliv_L = table_6_1_2_1_1_2_time_dom_res_alloc_A[dci->time_dom_resource_assignment][2];
/* FREQ_DOM_RESOURCE_ASSIGNMENT_UL */
// At the moment we are supporting only format 1_0 (and not format 1_1), so we only support resource allocation type 1 (and not type 0).
// For resource allocation type 1, the resource allocation field consists of a resource indication value (RIV):
// RIV = n_RB_ULBWP * (l_RB - 1) + start_RB if (l_RB - 1) <= floor (n_RB_ULBWP/2)
// RIV = n_RB_ULBWP * (n_RB_ULBWP - l_RB + 1) + (n_RB_ULBWP - 1 - start_RB) if (l_RB - 1) > floor (n_RB_ULBWP/2)
// the following two expressions apply only if (l_RB - 1) <= floor (n_RB_ULBWP/2)
l_RB = floor(dci->freq_dom_resource_assignment_DL/n_RB_ULBWP) + 1;
start_RB = dci->freq_dom_resource_assignment_DL%n_RB_ULBWP;
// if (l_RB - 1) > floor (n_RB_ULBWP/2) we need to recalculate them using the following lines
tmp_RIV = n_RB_ULBWP * (l_RB - 1) + start_RB;
if (tmp_RIV != dci->freq_dom_resource_assignment_DL) { // then (l_RB - 1) > floor (n_RB_ULBWP/2) and we need to recalculate l_RB and start_RB
l_RB = n_RB_ULBWP - l_RB + 2;
start_RB = n_RB_ULBWP - start_RB - 1;
}
// UL_CONFIG_REQ
ul_config->ul_config_list[ul_config->number_pdus].pdu_type = FAPI_NR_DL_CONFIG_TYPE_PUSCH;
ul_config->ul_config_list[ul_config->number_pdus].ulsch_config_pdu.rnti = rnti;
fapi_nr_ul_config_pusch_pdu_rel15_t *ulsch_config_pdu = &ul_config->ul_config_list[ul_config->number_pdus].ulsch_config_pdu.ulsch_pdu_rel15;
ulsch_config_pdu->number_rbs = l_RB;
ulsch_config_pdu->start_rb = start_RB;
ulsch_config_pdu->number_symbols = sliv_L;
ulsch_config_pdu->start_symbol = sliv_S;
ulsch_config_pdu->mcs = dci->mcs;
//ulsch0->harq_processes[dci->harq_process_number]->first_rb = start_RB;
//ulsch0->harq_processes[dci->harq_process_number]->nb_rb = l_RB;
//ulsch0->harq_processes[dci->harq_process_number]->mcs = dci->mcs;
//ulsch0->harq_processes[nr_pdci_info_extracted->harq_process_number]->DCINdi= nr_pdci_info_extracted->ndi;
break;
case format0_1:
break;
case format1_0:
/* TIME_DOM_RESOURCE_ASSIGNMENT */
// Subclause 5.1.2.1 of [6, TS 38.214]
// the Time domain resource assignment field of the DCI provides a row index of a higher layer configured table pdsch-symbolAllocation
// FIXME! To clarify which parameters to update after reception of row index
k_offset = table_5_1_2_1_1_2_time_dom_res_alloc_A[dci->time_dom_resource_assignment][0];
sliv_S = table_5_1_2_1_1_2_time_dom_res_alloc_A[dci->time_dom_resource_assignment][1];
sliv_L = table_5_1_2_1_1_2_time_dom_res_alloc_A[dci->time_dom_resource_assignment][2];
/* FREQ_DOM_RESOURCE_ASSIGNMENT_DL */
// only uplink resource allocation type 1
// At the moment we are supporting only format 0_0 (and not format 0_1), so we only support resource allocation type 1 (and not type 0).
// For resource allocation type 1, the resource allocation field consists of a resource indication value (RIV):
// RIV = n_RB_DLBWP * (l_RB - 1) + start_RB if (l_RB - 1) <= floor (n_RB_DLBWP/2)
// RIV = n_RB_DLBWP * (n_RB_DLBWP - l_RB + 1) + (n_RB_DLBWP - 1 - start_RB) if (l_RB - 1) > floor (n_RB_DLBWP/2)
// the following two expressions apply only if (l_RB - 1) <= floor (n_RB_DLBWP/2)
l_RB = floor(dci->freq_dom_resource_assignment_DL/n_RB_DLBWP) + 1;
start_RB = dci->freq_dom_resource_assignment_DL%n_RB_DLBWP;
// if (l_RB - 1) > floor (n_RB_DLBWP/2) we need to recalculate them using the following lines
tmp_RIV = n_RB_DLBWP * (l_RB - 1) + start_RB;
if (tmp_RIV != dci->freq_dom_resource_assignment_DL) { // then (l_RB - 1) > floor (n_RB_DLBWP/2) and we need to recalculate l_RB and start_RB
l_RB = n_RB_DLBWP - l_RB + 2;
start_RB = n_RB_DLBWP - start_RB - 1;
}
// DL_CONFIG_REQ
dl_config->dl_config_list[dl_config->number_pdus].pdu_type = FAPI_NR_DL_CONFIG_TYPE_DLSCH;
dl_config->dl_config_list[dl_config->number_pdus].dlsch_config_pdu.rnti = rnti;
fapi_nr_dl_config_dlsch_pdu_rel15_t *dlsch_config_pdu = &dl_config->dl_config_list[dl_config->number_pdus].dlsch_config_pdu.dlsch_config_rel15;
dlsch_config_pdu->number_rbs = l_RB;
dlsch_config_pdu->start_rb = start_RB;
dlsch_config_pdu->number_symbols = sliv_L;
dlsch_config_pdu->start_symbol = sliv_S;
dlsch_config_pdu->mcs = dci->mcs;
//pdlsch0_harq->nb_rb = l_RB;
//pdlsch0->current_harq_pid = dci->harq_process_number;
//pdlsch0->active = 1;
//pdlsch0->rnti = rnti;
//pdlsch0_harq->mcs = nr_pdci_info_extracted->mcs;
//pdlsch0_harq->DCINdi = nr_pdci_info_extracted->ndi;
dl_config->number_pdus = dl_config->number_pdus + 1;
break;
case format1_1:
break;
case format2_0:
break;
case format2_1:
break;
case format2_2:
break;
case format2_3:
break;
default:
break;
}
if(rnti == SI_RNTI){
......
......@@ -112,20 +112,20 @@ int8_t nr_ue_dl_indication(nr_downlink_indication_t *dl_info){
if(dl_info->rx_ind != NULL){
printf("[L2][IF MODULE][DL INDICATION][RX_IND]\n");
for(i=0; i<dl_info->rx_ind->number_pdus; ++i){
switch(dl_info->rx_ind->rx_request_body[i].pdu_type){
switch(dl_info->rx_ind->rx_indication_body[i].pdu_type){
case FAPI_NR_RX_PDU_TYPE_MIB:
ret_mask |= (handle_bcch_bch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index,
(dl_info->rx_ind->rx_request_body+i)->mib_pdu.pdu,
(dl_info->rx_ind->rx_request_body+i)->mib_pdu.additional_bits,
(dl_info->rx_ind->rx_request_body+i)->mib_pdu.ssb_index,
(dl_info->rx_ind->rx_request_body+i)->mib_pdu.ssb_length,
(dl_info->rx_ind->rx_request_body+i)->mib_pdu.cell_id )) << FAPI_NR_RX_PDU_TYPE_MIB;
(dl_info->rx_ind->rx_indication_body+i)->mib_pdu.pdu,
(dl_info->rx_ind->rx_indication_body+i)->mib_pdu.additional_bits,
(dl_info->rx_ind->rx_indication_body+i)->mib_pdu.ssb_index,
(dl_info->rx_ind->rx_indication_body+i)->mib_pdu.ssb_length,
(dl_info->rx_ind->rx_indication_body+i)->mib_pdu.cell_id )) << FAPI_NR_RX_PDU_TYPE_MIB;
break;
case FAPI_NR_RX_PDU_TYPE_SIB:
ret_mask |= (handle_bcch_dlsch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index,
(dl_info->rx_ind->rx_request_body+i)->sib_pdu.sibs_mask,
(dl_info->rx_ind->rx_request_body+i)->sib_pdu.pdu,
(dl_info->rx_ind->rx_request_body+i)->sib_pdu.pdu_length )) << FAPI_NR_RX_PDU_TYPE_SIB;
(dl_info->rx_ind->rx_indication_body+i)->sib_pdu.sibs_mask,
(dl_info->rx_ind->rx_indication_body+i)->sib_pdu.pdu,
(dl_info->rx_ind->rx_indication_body+i)->sib_pdu.pdu_length )) << FAPI_NR_RX_PDU_TYPE_SIB;
break;
case FAPI_NR_RX_PDU_TYPE_DLSCH:
ret_mask |= (0) << FAPI_NR_RX_PDU_TYPE_DLSCH;
......@@ -138,13 +138,23 @@ int8_t nr_ue_dl_indication(nr_downlink_indication_t *dl_info){
}
}
fapi_nr_dl_config_request_t *dl_config = &mac->dl_config_request;
if(dl_info->dci_ind != NULL){
printf("[L2][IF MODULE][DL INDICATION][DCI_IND]\n");
for(i=0; dl_info->dci_ind->number_of_dcis; ++i){
fapi_nr_dci_pdu_rel15_t *dci = &dl_info->dci_ind->dci_list[i].dci;
switch((dl_info->dci_ind->dci_list+i)->dci_type){
ret_mask |= (handle_dci(
dl_info->module_id,
dl_info->cc_id,
dl_info->gNB_index,
dci,
(dl_info->dci_ind->dci_list+i)->rnti,
(dl_info->dci_ind->dci_list+i)->dci_format)) << FAPI_NR_DCI_IND;
/*switch((dl_info->dci_ind->dci_list+i)->dci_type){
case FAPI_NR_DCI_TYPE_0_0:
case FAPI_NR_DCI_TYPE_0_1:
case FAPI_NR_DCI_TYPE_1_1:
......@@ -161,19 +171,7 @@ int8_t nr_ue_dl_indication(nr_downlink_indication_t *dl_info){
// mapping into DL_CONFIG_REQ for DL-SCH
fapi_nr_dl_config_dlsch_pdu_rel15_t *dlsch_config_pdu = &dl_config->dl_config_list[dl_config->number_pdus].dlsch_config_pdu.dlsch_config_rel15;
/*dlsch_config_pdu->format_indicator = dci->dci_format;
dlsch_config_pdu->frequency_domain_assignment = dci->frequency_domain_resouce_assignment;
dlsch_config_pdu->time_domain_assignment = dci->time_domain_resource_assignment;
dlsch_config_pdu->vrb_to_prb_mapping = dci->vrb_to_prb_mapping;
dlsch_config_pdu->mcs = dci->mcs;
dlsch_config_pdu->ndi = dci->new_data_indication;
dlsch_config_pdu->rv = dci->redundancy_version;
dlsch_config_pdu->harq_pid = dci->harq_process;
dlsch_config_pdu->dai = dci->downlink_assignment_index;
dlsch_config_pdu->tpc = dci->tpc_command;
dlsch_config_pdu->pucch_resource_indicator = dci->pucch_resource_indicator;
dlsch_config_pdu->pdsch_to_harq_feedback_timing_indicator = dci->pdsch_to_harq_feedback_timing_indicator;
*/
dl_config->dl_config_list[dl_config->number_pdus].dlsch_config_pdu.rnti = 0x0000; // TX RNTI: UE-spec
memcpy(dlsch_config_pdu, dci, sizeof(fapi_nr_dci_pdu_rel15_t));
......@@ -193,7 +191,7 @@ int8_t nr_ue_dl_indication(nr_downlink_indication_t *dl_info){
default:
break;
}
}*/
//(dl_info->dci_list+i)->rnti
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment