Commit 566fd451 authored by Rohit Gupta's avatar Rohit Gupta

Merge branch 'feature-34-test_framework' into develop

parents 031e6a02 7f4ec782
This diff is collapsed.
......@@ -33,6 +33,7 @@
import time
import serial
import os
from socket import AF_INET
from pyroute2 import IPRoute
import sys
import re
......@@ -62,7 +63,7 @@ def find_open_port():
while True:
if os.path.exists(serial_port) == True:
return serial_port
for port in range(2,100):
for port in range(0,100):
serial_port_tmp = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port_tmp) == True:
print 'New Serial Port : ' + serial_port_tmp
......@@ -97,11 +98,12 @@ signal.signal(signal.SIGINT, signal_handler)
#ser.isOpen()
class pppThread (threading.Thread):
def __init__(self, threadID, name, counter):
def __init__(self, threadID, name, counter,port):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.counter = counter
self.port=port
def run(self):
print "Starting " + self.name
#Here we keep running pppd thread in indefinite loop as this script terminates sometimes
......@@ -111,6 +113,10 @@ class pppThread (threading.Thread):
print "Starting wvdial now..."
print 'exit_flag = ' + str(exit_flag)
send_command('AT+CGATT=1','OK', 300)
#Now we do search and replace on wvdial config file
cmd="sed -i \"s%Modem = .*%Modem = " + self.port + "%g\" " + bandrich_ppd_config
os.system(cmd)
os.system('wvdial -C ' + bandrich_ppd_config + '' )
if exit_flag == 1:
print "Exit flag set to true. Exiting pppThread now"
......@@ -146,6 +152,7 @@ def send_command (cmd, response, timeout):
def start_ue () :
#print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
global serial_port
timeout=60 #timeout in seconds
send_command('AT', 'OK' , timeout)
send_command('AT+CFUN=1' , 'OK' , timeout)
......@@ -153,23 +160,33 @@ def start_ue () :
send_command('AT+CGATT=1','OK', 300)
#os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
thread_ppp = pppThread(1, "ppp_thread", 1)
thread_ppp = pppThread(1, "ppp_thread", 1,port=serial_port)
thread_ppp.start()
iface='ppp0'
#iface='ppp0'
while 1:
time.sleep ( 2)
iface=''
#Now we check if ppp0 interface is up and running
try:
if exit_flag == 1:
break
cmd="ifconfig -a | sed 's/[ \t].*//;/^$/d' | grep ppp"
status, out = commands.getstatusoutput(cmd)
iface=out
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add ' + gw + ' ppp0')
print "iface = " + iface
print " Setting route now..."
#os.system("status=1; while [ \"$status\" -ne \"0\" ]; do route add -host " + gw + ' ' + iface + " ; status=$? ;sleep 1; echo \"status = $status\" ; sleep 2; done ")
os.system ('route add -host ' + gw + ' ' + iface + ' 2> /dev/null')
#ip.route('add', dst=gw, oif=iface)
os.system('sleep 5')
os.system ('ping ' + gw)
break
#print "Starting ping now..."
os.system ('ping -c 1 ' + gw)
#break
except Exception, e:
error = ' Interface ' + iface + 'does not exist...'
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
......@@ -206,6 +223,7 @@ def reset_ue():
os.system(cmd + " ; sleep 15" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 30" )
find_open_port()
stop_ue()
i=1
......@@ -213,14 +231,17 @@ gw='192.172.0.1'
while i < len(sys.argv):
arg=sys.argv[i]
if arg == '--start-ue' :
print "Turning on UE..."
find_open_port()
print 'Using Serial port : ' + serial_port
start_ue()
elif arg == '--stop-ue' :
print "Turning off UE..."
find_open_port()
print 'Using Serial port : ' + serial_port
stop_ue()
elif arg == '--reset-ue' :
print "Resetting UE..."
find_open_port()
reset_ue()
elif arg == '-gw' :
......
#!/usr/bin/python
#******************************************************************************
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
# *******************************************************************************/
# \author Navid Nikaein, Rohit Gupta
import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import os
import commands
# configure the serial connections (the parameters differs on the device you are connecting to)
#First we find an open port to work with
serial_port=''
openair_dir = os.environ.get('OPENAIR_DIR')
if openair_dir == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
#Stop the USB BUS of USRPB210
def stop_usrpb210():
stringIdBandrich='National Instruments Corp.'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
if (out == '') :
print "USRP B210 not found. Exiting now..."
sys.exit()
p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
res=p.findall(out)
BusId=res[0][0]
DeviceId=res[0][1]
VendorId=res[0][2]
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print "USRP B210 found in..." + usb_dir
cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
os.system(cmd)
#Start the USB bus of USRP B210
def start_usrpb210():
stringIdBandrich='National Instruments Corp.'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
if (out == '') :
print "USRP B210 not found. Exiting now..."
sys.exit()
p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
res=p.findall(out)
BusId=res[0][0]
DeviceId=res[0][1]
VendorId=res[0][2]
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print "USRP B210 found in..." + usb_dir
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd)
i=1
while i < len(sys.argv):
arg=sys.argv[i]
if arg == '--start-usrpb210' :
start_usrpb210()
elif arg == '--stop-usrpb210' :
stop_usrpb210()
elif arg == '-h' :
print "--stop-usrpb210: Stop the USRP B210. It cannot be found in uhd_find_devices"
print "--start-usrpb210: Start the USRP B210. It can now be found in uhd_find_devices"
else :
print " Script called with wrong arguments, arg = " + arg
sys.exit()
i = i +1
......@@ -226,7 +226,25 @@ check_install_additional_tools (){
valgrind \
vlan \
ctags \
ntpdate
ntpdate \
iperf3 \
android-tools-adb
$SUDO pip install paramiko
$SUDO pip install pyroute2
$SUDO rm -fr /opt/ssh
$SUDO git clone https://gist.github.com/2190472.git /opt/ssh
log_netiface=$OPENAIR_DIR/cmake_targets/log/netiface_install_log.txt
echo_info "Installing Netinterfaces package. The logfile for installation is in $log_netiface"
(
$SUDO rm -fr /tmp/netifaces-0.10.4.tar.gz /tmp/netifaces
wget -P /tmp https://pypi.python.org/packages/18/fa/dd13d4910aea339c0bb87d2b3838d8fd923c11869b1f6e741dbd0ff3bc00/netifaces-0.10.4.tar.gz
tar -xzvf /tmp/netifaces-0.10.4.tar.gz -C /tmp
cd /tmp/netifaces-0.10.4
$SUDO python setup.py install
cd -
) >& $log_netiface
}
check_install_oai_software() {
......@@ -293,8 +311,7 @@ check_install_oai_software() {
python-numpy \
sshpass \
libxslt1-dev \
android-tools-adb \
iperf3
android-tools-adb
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
......@@ -303,11 +320,7 @@ check_install_oai_software() {
install_nettle_from_source
install_gnutls_from_source
$SUDO pip install paramiko
$SUDO pip install pyroute2
install_asn1c_from_source
$SUDO rm -fr /opt/ssh
$SUDO git clone https://gist.github.com/2190472.git /opt/ssh
}
install_asn1c_from_source(){
......@@ -315,14 +328,12 @@ install_asn1c_from_source(){
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
(
$SUDO rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516
rm -rf /tmp/asn1c-r1516/*
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
cd /tmp/asn1c-r1516
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0
./configure
make -j`nproc`
$SUDO make install
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment