Commit 59cfa1fc authored by thomasl's avatar thomasl

fixing compilation issues with new cmake procedure



git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6814 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent c8a659a1
This diff is collapsed.
......@@ -33,6 +33,114 @@
#######################################
SUDO=sudo
###############################
## echo and family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1
cecho() {
# Color-echo
# arg1 = message
# arg2 = color
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
[ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
echo -e "$message"
return
}
echo_error() { cecho "$*" $red ;}
echo_fatal() { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow ;}
echo_success() { cecho "$*" $green ;}
echo_info() { cecho "$*" $blue ;}
print_help() {
echo_info '
This program installs OpenAirInterface Software
You should have ubuntu 14.xx, updated, and the Linux kernel >= 3.14
Options
-h
This help
-c | --clean
Erase all files made by previous compilation, installation"
--clean-kernel
Erase previously installed features in kernel: iptables, drivers, ...
-C | --config-file
The configuration file to install
-I | --install-external-packages
Installs required packages such as LibXML, asn1.1 compiler, freediameter, ...
-g | --run-with-gdb
Add debugging symbols to compilation directives
-eNB
Makes the eNB LTE softmodem
-UE
Makes the UE softmodem
-oaisim
Makes the oaisim simulator
-unit_simulators
Makes the unitary tests Layer 1 simulators
-EPC
Makes the EPC
-r | --3gpp-release
default is Rel10,
Rel8 limits the implementation to 3GPP Release 8 version
-w | --hardware
EXMIMO (Default), USRP, None
Adds this RF board support (in external packages installation and in compilation)
-s | --check
runs a set of auto-tests based on simulators and several compilation tests
-V | --vcd
Adds a debgging facility to the binary files: GUI with major internal synchronization events
-x | --xforms
Adds a software oscilloscope feature to the produced binaries
Typical Options for a quick startup with a COTS UE and Eurecom RF board: build_oai.bash -I -g -eNB -EPC -x'
}
###########################
# Cleaners
###########################
clean_kernel() {
$SUDO modprobe ip_tables
$SUDO modprobe x_tables
$SUDO iptables -P INPUT ACCEPT
$SUDO iptables -F INPUT
$SUDO iptables -P OUTPUT ACCEPT
$SUDO iptables -F OUTPUT
$SUDO iptables -P FORWARD ACCEPT
$SUDO iptables -F FORWARD
$SUDO iptables -t nat -F
$SUDO iptables -t mangle -F
$SUDO iptables -t filter -F
$SUDO iptables -t raw -F
echo_info "Flushed iptables"
$SUDO rmmod nasmesh > /dev/null 2>&1
$SUDO rmmod oai_nw_drv > /dev/null 2>&1
$SUDO rmmod openair_rf > /dev/null 2>&1
$SUDO rmmod ue_ip > /dev/null 2>&1
echo_info "removed drivers from kernel"
}
clean_all_files() {
dir=$OPENAIR_DIR/cmake
rm -rf $dir/log $dir/bin $dir/autotests/bin $dir/autotests/log $dir/autotests/*/buid $dir/build_*/build
}
###################################
# Compilers
###################################
compilations() {
cd $OPENAIR_DIR/cmake_targets/$1
{
......@@ -132,6 +240,10 @@ run_compilation_autotests() {
"test 0120: nasmesk.ko failed"
}
##########################################
# X.509 certificates
##########################################
make_one_cert() {
openssl genrsa -out $1.key.pem 1024
openssl req -new -batch -out $1.csr.pem -key $1.key.pem -subj /CN=$1.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
......@@ -163,6 +275,10 @@ make_certs(){
}
############################################
# External packages installers
############################################
install_nettle_from_source() {
cd /tmp
echo "Downloading nettle archive"
......@@ -311,7 +427,7 @@ check_install_asn1c(){
compile_hss() {
cd $OPENAIRCN_DIR/OPENAIRHSS
if [ "$1" -eq 1 ]; then
if [ "$CLEAN" = "1" ]; then
echo_info "build a clean HSS"
rm -rfv obj* m4 .autom4* configure
fi
......@@ -336,79 +452,6 @@ compile_hss() {
return 1
}
compile_epc() {
cd $OPENAIRCN_DIR
if [ "$1" = 1 ]; then
echo_info "build a clean EPC"
bash_exec "rm -rf objs"
fi
OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*`
if [ ! -n "$OBJ_DIR" ]; then
OBJ_DIR="objs"
bash_exec "mkdir -m 777 ./$OBJ_DIR"
echo_success "Created $OBJ_DIR directory"
else
OBJ_DIR=`basename $OBJ_DIR`
fi
if [ ! -f $OBJ_DIR/Makefile ]; then
if [ ! -n "m4" ]; then
mkdir -m 777 m4
fi
bash_exec "autoreconf -i -f"
echo_success "Invoking autogen"
bash_exec "libtoolize"
bash_exec "./autogen.sh"
cd ./$OBJ_DIR
echo_success "Invoking configure"
if [ $DEBUG -ne 0 ]; then
../configure --enable-debug --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib
else
../configure --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib
fi
else
cd ./$OBJ_DIR
fi
# pkill oai_epc
# pkill tshark
if [ -f Makefile ]; then
echo_success "Compiling..."
make -j $NUM_CPU
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
return 1
else
cp -pf ./OAI_EPC/oai_epc $OPENAIR_TARGETS/bin
fi
else
echo_error "Configure failed, exiting"
return 1
fi
cd $OPENAIRCN_DIR/GTPV1-U/GTPUAH;
make
if [ $? -ne 0 ]; then
echo_error "Build GTPUAH module failed, exiting"
return 1
else
$SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables
$SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin
fi
cd $OPENAIRCN_DIR/GTPV1-U/GTPURH;
make
if [ $? -ne 0 ]; then
echo_error "Build GTPURH module failed, exiting"
return 1
else
$SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables
$SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin
fi
return 0
}
compile_nas_tools() {
export NVRAM_DIR=$OPENAIR_TARGETS/bin
......@@ -426,46 +469,10 @@ compile_nas_tools() {
touch /tmp/nas_cleaned
}
# arg1 is RT
# arg2 is HW
# arg3 is ENB_S1
install_ltesoftmodem() {
# RT
if [ $1 = "RTAI" ]; then
if [ ! -f /tmp/init_rt_done.tmp ]; then
echo_info " 8.1 Insert RTAI modules"
$SUDO insmod /usr/realtime/modules/rtai_hal.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_sched.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_sem.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_fifos.ko > /dev/null 2>&1
$SUDO insmod /usr/realtime/modules/rtai_mbx.ko > /dev/null 2>&1
$SUDO touch /tmp/init_rt_done.tmp
$SUDO chmod 666 /tmp/init_rt_done.tmp
else
echo_warning " 8.1 RTAI modules already inserted"
fi
fi
#HW
if [ $2 = "EXMIMO" ]; then
echo_info " 8.2 [EXMIMO] creating RTAI fifos"
for i in `seq 0 64`; do
have_rtfX=`ls /dev/ |grep -c rtf$i`;
if [ "$have_rtfX" -eq 0 ] ; then
$SUDO mknod -m 666 /dev/rtf$i c 150 $i;
fi;
done
echo_info " 8.3 [EXMIMO] Build lte-softmodemdrivers"
cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make # || exit 1
cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make # || exit 1
echo_info " 8.4 [EXMIMO] Setup RF card"
cd $OPENAIR_TARGETS/RT/USER
. ./init_exmimo2.sh
else
if [ $2 = "USRP" ]; then
echo_info " 8.2 [USRP] "
fi
TDB() {
if [ $2 = "USRP" ]; then
echo_info " 8.2 [USRP] "
fi
# ENB_S1
......@@ -596,49 +603,3 @@ set_openair_env(){
}
###############################
## echo and family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
cecho() # Color-echo
# arg1 = message
# arg2 = color
{
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
if [ "$BUILD_FROM_MAKEFILE" = "" ]; then
echo -e -n "$color$message$reset_color"
echo
else
echo "$message"
fi
return
}
echo_error() { cecho "$*" $red ;}
echo_fatal() { cecho "$*" $red; exit -1 ;}
echo_warning() { cecho "$*" $yellow ;}
echo_success() { cecho "$*" $green ;}
echo_info() { cecho "$*" $blue ;}
bash_exec() {
output=$($1 2>&1)
result=$?
if [ $result -eq 0 ]; then
echo_success "$1"
else
echo_error "$1: $output"
fi
}
This diff is collapsed.
......@@ -29,6 +29,9 @@
#include <stdio.h>
#include <stdlib.h>
#ifdef CMAKER
#include <platform_types.h>
#endif
#if defined(ENB_MODE)
# define display_backtrace()
......
......@@ -438,7 +438,9 @@ __init gtpuah_tg_init(void) {
pr_info("GTPUAH: Initializing module (KVersion: %d)\n", KVERSION);
pr_info("GTPUAH: Copyright Polaris Networks 2010-2011\n");
pr_info("GTPUAH: Modified by EURECOM Lionel GAUTHIER 2014\n");
#ifndef CMAKER
pr_info("GTPUAH: Compiled %s at time %s\n",__DATE__,__TIME__);
#endif
#if defined(WITH_IPV6)
pr_info("GTPURH: IPv4/IPv6 enabled\n");
#else
......
......@@ -530,7 +530,9 @@ __init gtpurh_tg_init(void) {
pr_info("GTPURH: Initializing module (KVersion: %d)\n", KVERSION);
pr_info("GTPURH: Copyright Polaris Networks 2010-2011\n");
pr_info("GTPURH: Modified by EURECOM Lionel GAUTHIER 2014\n");
#ifndef CMAKER
pr_info("GTPURH: Compiled %s at time %s\n",__DATE__,__TIME__);
#endif
#if defined(WITH_IPV6)
pr_info("GTPURH: IPv4/IPv6 enabled\n");
#else
......
......@@ -66,7 +66,7 @@ mme_app_send_s11_create_session_req(
DevAssert(ue_context_pP != NULL);
#if defined(DISABLE_STANDALONE_EPC)
#if !defined(ENABLE_STANDALONE_EPC)
to_task = TASK_S11;
#else
to_task = TASK_SPGW_APP;
......@@ -664,7 +664,7 @@ mme_app_handle_initial_context_setup_rsp(
return;
}
#if defined(DISABLE_STANDALONE_EPC)
#if !defined(ENABLE_STANDALONE_EPC)
to_task = TASK_S11;
#else
to_task = TASK_SPGW_APP;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment