Commit 5c30151d authored by Florian Kaltenberger's avatar Florian Kaltenberger

fixes issue 40

parent ce0cb110
......@@ -72,8 +72,11 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(uint8_t Kmimo,uint8_t Mdlharq,uint8_t N_RB_DL, ui
*/
void free_ue_dlsch(LTE_UE_DLSCH_t *dlsch);
LTE_eNB_ULSCH_t *new_eNB_ulsch(uint8_t Mdlharq,uint8_t max_turbo_iterations,uint8_t N_RB_UL, uint8_t abstraction_flag);
LTE_UE_DLSCH_t *new_ue_dlsch(uint8_t Kmimo,uint8_t Mdlharq,uint8_t max_turbo_iterations,uint8_t N_RB_DL, uint8_t abstraction_flag);
LTE_UE_ULSCH_t *new_ue_ulsch(unsigned char Mdlharq,unsigned char N_RB_UL, uint8_t abstraction_flag);
void clean_eNb_ulsch(LTE_eNB_ULSCH_t *ulsch, uint8_t abstraction_flag);
......@@ -1764,7 +1767,9 @@ double computeRhoB_UE(PDSCH_CONFIG_DEDICATED *pdsch_config_dedicated,
LTE_UE_DLSCH_t *dlsch_ue);
*/
uint8_t get_prach_prb_offset(LTE_DL_FRAME_PARMS *frame_parms, uint8_t tdd_mapindex, uint16_t Nf);
uint8_t get_prach_prb_offset(LTE_DL_FRAME_PARMS *frame_parms, uint8_t tdd_mapindex, uint16_t Nf);
uint8_t ul_subframe2pdcch_alloc_subframe(LTE_DL_FRAME_PARMS *frame_parms,uint8_t n);
/**@}*/
#endif
......@@ -326,7 +326,7 @@ int main(int argc, char **argv)
uint32_t DLSCH_RB_ALLOC = 0x1fff;
int numCCE=0;
int dci_length_bytes=0,dci_length=0;
double BW = 5.0;
//double channel_bandwidth = 5.0, sampling_rate=7.68;
int common_flag=0,TPC=0;
double cpu_freq_GHz;
......@@ -680,27 +680,19 @@ int main(int argc, char **argv)
switch (N_RB_DL) {
case 6:
if (rballocset==0) DLSCH_RB_ALLOC = 0x3f;
BW = 1.25;
num_pdcch_symbols = 3;
break;
case 25:
if (rballocset==0) DLSCH_RB_ALLOC = 0x1fff;
BW = 5.00;
break;
case 50:
if (rballocset==0) DLSCH_RB_ALLOC = 0x1ffff;
BW = 10.00;
break;
case 100:
if (rballocset==0) DLSCH_RB_ALLOC = 0x1ffffff;
BW = 20.00;
break;
}
......@@ -708,8 +700,6 @@ int main(int argc, char **argv)
} else
NB_RB = 4;
NB_RB=conv_nprb(0,DLSCH_RB_ALLOC,N_RB_DL);
if ((transmission_mode > 1) && (n_tx != 2))
printf("n_tx must be >1 for transmission_mode %d\n",transmission_mode);
......@@ -955,7 +945,8 @@ int main(int argc, char **argv)
eNB2UE[0] = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
forgetting_factor,
rx_sample_offset,
0);
......@@ -965,8 +956,9 @@ int main(int argc, char **argv)
eNB2UE[n] = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
forgetting_factor,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
forgetting_factor,
rx_sample_offset,
0);
}
......
......@@ -54,8 +54,6 @@
#include "OCG_vars.h"
//#define BW 5.0
PHY_VARS_eNB *PHY_vars_eNB;
PHY_VARS_UE *PHY_vars_UE;
......@@ -172,7 +170,6 @@ int main(int argc, char **argv)
unsigned int trials,errs[4]= {0,0,0,0}; //,round_trials[4]={0,0,0,0};
uint8_t N_RB_DL=25,osf=1;
double BW=5.0;
uint32_t perfect_ce = 0;
lte_frame_type_t frame_type = FDD;
......@@ -255,27 +252,9 @@ int main(int argc, char **argv)
case 'R':
N_RB_DL = atoi(optarg);
switch (N_RB_DL) {
case 6:
BW=1.25;
break;
case 25:
BW=5.0;
break;
case 50:
BW=10.0;
break;
case 100:
BW=20.0;
break;
default:
if ((N_RB_DL!=6) && (N_RB_DL!=25) && (N_RB_DL!=50) && (N_RB_DL!=100)) {
printf("Unsupported Bandwidth %d\n",N_RB_DL);
exit(-1);
break;
}
break;
......@@ -397,7 +376,8 @@ int main(int argc, char **argv)
eNB2UE = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
0,
0,
0);
......
......@@ -53,9 +53,6 @@
#include "OCG_vars.h"
#define BW 5.0
PHY_VARS_eNB *PHY_vars_eNb,*PHY_vars_eNb1,*PHY_vars_eNb2;
PHY_VARS_UE *PHY_vars_UE;
......@@ -485,7 +482,8 @@ int main(int argc, char **argv)
eNB2UE = new_channel_desc_scm(PHY_vars_eNb->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
0,
0,
0);
......@@ -494,7 +492,8 @@ int main(int argc, char **argv)
eNB2UE1 = new_channel_desc_scm(PHY_vars_eNb->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
0,
4,
0);
......@@ -503,7 +502,8 @@ int main(int argc, char **argv)
eNB2UE2 = new_channel_desc_scm(PHY_vars_eNb->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNb->lte_frame_parms.N_RB_DL),
0,
8,
0);
......
......@@ -552,7 +552,6 @@ int main(int argc, char **argv)
uint32_t *txptr;
int aarx;
int k;
double BW=5.0;
uint32_t perfect_ce = 0;
number_of_cards = 1;
......@@ -840,28 +839,11 @@ int main(int argc, char **argv)
subframe,NUMBER_OF_OFDM_CARRIERS,
PHY_vars_eNB->lte_frame_parms.Ncp,PHY_vars_eNB->lte_frame_parms.samples_per_tti,nsymb);
switch (N_RB_DL) {
case 6:
BW = 1.25;
break;
case 25:
BW = 5.00;
break;
case 50:
BW = 10.00;
break;
case 100:
BW = 20.00;
break;
}
eNB2UE = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx_eNB,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_DL),
0,
0,
0);
......
......@@ -47,8 +47,6 @@
#include "OCG_vars.h"
#define BW 5.0
int current_dlsch_cqi; //FIXME!
PHY_VARS_eNB *PHY_vars_eNB;
......@@ -412,7 +410,8 @@ int main(int argc, char **argv)
UE2eNB = new_channel_desc_scm(PHY_vars_UE->lte_frame_parms.nb_antennas_tx,
PHY_vars_eNB->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_UL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_UL),
0.0,
delay,
0);
......
......@@ -49,8 +49,6 @@
#include "OCG_vars.h"
#include "UTIL/LOG/log_extern.h"
#define BW 5.0
int current_dlsch_cqi; //FIXME!
PHY_VARS_eNB *PHY_vars_eNB;
......@@ -418,7 +416,8 @@ int main(int argc, char **argv)
UE2eNB = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_UL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_UL),
0.0,
0,
0);
......
......@@ -58,23 +58,11 @@
extern unsigned short dftsizes[33];
extern short *ul_ref_sigs[30][2][33];
//#define AWGN
//#define NO_DCI
#define BW 7.68
//#define ABSTRACTION
//#define PERFECT_CE
/*
#define RBmask0 0x00fc00fc
#define RBmask1 0x0
#define RBmask2 0x0
#define RBmask3 0x0
*/
PHY_VARS_eNB *PHY_vars_eNB;
PHY_VARS_UE *PHY_vars_UE;
#define MCS_COUNT 23//added for PHY abstraction
//#define MCS_COUNT 23//added for PHY abstraction
channel_desc_t *eNB2UE[NUMBER_OF_eNB_MAX][NUMBER_OF_UE_MAX];
channel_desc_t *UE2eNB[NUMBER_OF_UE_MAX][NUMBER_OF_eNB_MAX];
......@@ -155,11 +143,6 @@ void lte_param_init(unsigned char N_tx, unsigned char N_rx,unsigned char transmi
#define UL_RB_ALLOC 0x1ff;
int main(int argc, char **argv)
{
......@@ -172,8 +155,6 @@ int main(int argc, char **argv)
double input_snr_step=.2,snr_int=30;
double blerr;
//int **txdataF, **txdata;
int **txdata;
LTE_DL_FRAME_PARMS *frame_parms;
......@@ -680,7 +661,8 @@ int main(int argc, char **argv)
UE2eNB = new_channel_desc_scm(PHY_vars_eNB->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE->lte_frame_parms.nb_antennas_rx,
channel_model,
BW,
N_RB2sampling_rate(PHY_vars_eNB->lte_frame_parms.N_RB_UL),
N_RB2channel_bandwidth(PHY_vars_eNB->lte_frame_parms.N_RB_UL),
forgetting_factor,
delay,
0);
......
......@@ -73,7 +73,7 @@ void init_freq_channel(channel_desc_t *desc,uint16_t nb_rb,int16_t n_samples)
if (desc->nb_taps==1)
delay = desc->delays[l];
else
delay = desc->delays[l]+NB_SAMPLES_CHANNEL_OFFSET/desc->BW;
delay = desc->delays[l]+NB_SAMPLES_CHANNEL_OFFSET/desc->sampling_rate;
cos_lut[f+(n_samples>>1)][l] = cos(2*M_PI*freq*delay);
sin_lut[f+(n_samples>>1)][l] = sin(2*M_PI*freq*delay);
......
......@@ -69,7 +69,9 @@ typedef struct {
///Maximum path delay in mus.
double Td;
///Channel bandwidth in MHz.
double BW;
double channel_bandwidth;
///System sampling rate in Msps.
double sampling_rate;
///Ricean factor of first tap wrt other taps (0..1, where 0 means AWGN and 1 means Rayleigh channel).
double ricean_factor;
///Angle of arrival of wavefront (in radians). For Ricean channel only. This assumes that both RX and TX have linear antenna arrays with lambda/2 antenna spacing. Furhter it is assumed that the arrays are parallel to each other and that they are far enough apart so that we can safely assume plane wave propagation.
......@@ -202,7 +204,8 @@ typedef enum {
channel_desc_t *new_channel_desc_scm(uint8_t nb_tx,
uint8_t nb_rx,
SCM_t channel_model,
double BW,
double sampling_rate,
double channel_bandwidth,
double forgetting_factor,
int32_t channel_offset,
double path_loss_dB);
......@@ -364,6 +367,10 @@ void multipath_tv_channel(channel_desc_t *desc,
/**@} */
/**@} */
double N_RB2sampling_rate(uint16_t N_RB);
double N_RB2channel_bandwidth(uint16_t N_RB);
#endif
......@@ -175,13 +175,13 @@ void tv_channel(channel_desc_t *desc,double complex ***H,uint16_t length)
{
for(p=0;p<desc->nb_paths;p++)
{
H[i][j] += sqrt(desc->amps[j]/2)*alpha[p]*cexp(-I*(2*pi*w_Hz[p]*i*(1/(desc->BW*1e6))+phi_rad[p]));
H[i][j] += sqrt(desc->amps[j]/2)*alpha[p]*cexp(-I*(2*pi*w_Hz[p]*i*(1/(desc->sampling_rate*1e6))+phi_rad[p]));
}
}
}
for(j=0;j<desc->nb_paths;j++)
{
phi_rad[j] = fmod(2*pi*w_Hz[j]*(length-1)*(1/desc->BW)+phi_rad[j],2*pi);
phi_rad[j] = fmod(2*pi*w_Hz[j]*(length-1)*(1/desc->sampling_rate)+phi_rad[j],2*pi);
}
*/
......@@ -193,13 +193,13 @@ void tv_channel(channel_desc_t *desc,double complex ***H,uint16_t length)
H[i+(j*desc->nb_rx)][k][l] = 0;
for(p=0; p<desc->nb_paths; p++) {
H[i+(j*desc->nb_rx)][k][l] += sqrt(desc->amps[l]/2)*alpha[p]*cexp(I*(2*pi*w_Hz[p]*k*(1/(desc->BW*1e6))+phi_rad[p]));
H[i+(j*desc->nb_rx)][k][l] += sqrt(desc->amps[l]/2)*alpha[p]*cexp(I*(2*pi*w_Hz[p]*k*(1/(desc->sampling_rate*1e6))+phi_rad[p]));
}
}
}
for(j=0; j<desc->nb_paths; j++) {
phi_rad[j] = fmod(2*pi*w_Hz[j]*(length-1)*(1/desc->BW)+phi_rad[j],2*pi);
phi_rad[j] = fmod(2*pi*w_Hz[j]*(length-1)*(1/desc->sampling_rate)+phi_rad[j],2*pi);
}
}
}
......
This diff is collapsed.
......@@ -303,8 +303,8 @@ void do_DL_sig(double **r_re0,double **r_im0,
10*log10(rx_pwr*(double)frame_parms->N_RB_DL*12),next_slot,next_slot>>1);
LOG_D(OCM,"[SIM][DL] UE %d : rx_pwr (noise) -132 dBm/RE (N0fs = %.1f dBm, N0B = %.1f dBm) for slot %d (subframe %d)\n",
UE_id,
10*log10(eNB2UE[eNB_id][UE_id][CC_id]->BW*1e6)-174,
10*log10(eNB2UE[eNB_id][UE_id][CC_id]->BW*1e6*12*frame_parms->N_RB_DL/(double)frame_parms->ofdm_symbol_size)-174,
10*log10(eNB2UE[eNB_id][UE_id][CC_id]->sampling_rate*1e6)-174,
10*log10(eNB2UE[eNB_id][UE_id][CC_id]->sampling_rate*1e6*12*frame_parms->N_RB_DL/(double)frame_parms->ofdm_symbol_size)-174,
next_slot,next_slot>>1);
#endif
......@@ -342,7 +342,7 @@ void do_DL_sig(double **r_re0,double **r_im0,
r_im0,
nb_antennas_rx,
frame_parms->samples_per_tti>>1,
1e3/eNB2UE[eNB_id][UE_id][CC_id]->BW, // sampling time (ns)
1e3/eNB2UE[eNB_id][UE_id][CC_id]->sampling_rate, // sampling time (ns)
(double)PHY_vars_UE_g[UE_id][CC_id]->rx_total_gain_dB - 66.227); // rx_gain (dB) (66.227 = 20*log10(pow2(11)) = gain from the adc that will be applied later)
#ifdef DEBUG_SIM
......@@ -584,7 +584,7 @@ void do_UL_sig(double **r_re0,double **r_im0,double **r_re,double **r_im,double
r_im,
nb_antennas_rx,
frame_parms->samples_per_tti>>1,
1e3/UE2eNB[0][eNB_id][CC_id]->BW, // sampling time (ns)
1e3/UE2eNB[0][eNB_id][CC_id]->sampling_rate, // sampling time (ns)
(double)PHY_vars_eNB_g[eNB_id][CC_id]->rx_total_gain_eNB_dB - 66.227); // rx_gain (dB) (66.227 = 20*log10(pow2(11)) = gain from the adc that will be applied later)
#ifdef DEBUG_SIM
......
......@@ -1122,24 +1122,28 @@ void init_ocm(void)
else
*/
eNB2UE[eNB_id][UE_id][CC_id] = new_channel_desc_scm(PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE_g[UE_id][CC_id]->lte_frame_parms.nb_antennas_rx,
map_str_to_int(small_scale_names,oai_emulation.environment_system_config.fading.small_scale.selected_option),
oai_emulation.environment_system_config.system_bandwidth_MB,
forgetting_factor,
0,
0);
eNB2UE[eNB_id][UE_id][CC_id] =
new_channel_desc_scm(PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.nb_antennas_tx,
PHY_vars_UE_g[UE_id][CC_id]->lte_frame_parms.nb_antennas_rx,
map_str_to_int(small_scale_names,oai_emulation.environment_system_config.fading.small_scale.selected_option),
N_RB2sampling_rate(PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.N_RB_DL),
N_RB2channel_bandwidth(PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.N_RB_DL),
forgetting_factor,
0,
0);
random_channel(eNB2UE[eNB_id][UE_id][CC_id],abstraction_flag);
LOG_D(OCM,"[SIM] Initializing channel (%s, %d) from UE %d to eNB %d\n", oai_emulation.environment_system_config.fading.small_scale.selected_option,
map_str_to_int(small_scale_names, oai_emulation.environment_system_config.fading.small_scale.selected_option),UE_id, eNB_id);
UE2eNB[UE_id][eNB_id][CC_id] = new_channel_desc_scm(PHY_vars_UE_g[UE_id][CC_id]->lte_frame_parms.nb_antennas_tx,
PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.nb_antennas_rx,
map_str_to_int(small_scale_names, oai_emulation.environment_system_config.fading.small_scale.selected_option),
oai_emulation.environment_system_config.system_bandwidth_MB,
forgetting_factor,
0,
0);
UE2eNB[UE_id][eNB_id][CC_id] =
new_channel_desc_scm(PHY_vars_UE_g[UE_id][CC_id]->lte_frame_parms.nb_antennas_tx,
PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.nb_antennas_rx,
map_str_to_int(small_scale_names, oai_emulation.environment_system_config.fading.small_scale.selected_option),
N_RB2sampling_rate(PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.N_RB_UL),
N_RB2channel_bandwidth(PHY_vars_eNB_g[eNB_id][CC_id]->lte_frame_parms.N_RB_UL),
forgetting_factor,
0,
0);
random_channel(UE2eNB[UE_id][eNB_id][CC_id],abstraction_flag);
......
......@@ -254,7 +254,7 @@ void init_snr(channel_desc_t* eNB2UE, node_desc_t *enb_data, node_desc_t *ue_dat
uint8_t qq;
/* Thermal noise is calculated using 10log10(K*T*B) K = Boltzmann's constant T = room temperature B = bandwidth */
thermal_noise = -174 + 10*log10(eNB2UE->BW*1e6); //value in dBm
thermal_noise = -174 + 10*log10(eNB2UE->sampling_rate*1e6); //value in dBm
//for (aarx=0; aarx<eNB2UE->nb_rx; aarx++)
*N0 = thermal_noise + ue_data->rx_noise_level;//? all the element have the same noise level?????
......@@ -496,7 +496,7 @@ void init_snr_up(channel_desc_t* UE2eNB, node_desc_t *enb_data, node_desc_t *ue_
// nb_rb = phy_vars_eNB->ulsch_eNB[UE_id]->harq_processes[harq_pid]->nb_rb;
/* Thermal noise is calculated using 10log10(K*T*B) K = Boltzmann's constant T = room temperature B = bandwidth */
thermal_noise = -174 + 10*log10(UE2eNB->BW*1e6); //value in dBm
thermal_noise = -174 + 10*log10(UE2eNB->sampling_rate*1e6); //value in dBm
*N0 = thermal_noise + enb_data->rx_noise_level;//? all the element have the same noise level?????
double lambda ;
double residual;
......@@ -557,7 +557,7 @@ void calculate_sinr(channel_desc_t* eNB2UE, node_desc_t *enb_data, node_desc_t *
short count;
/* Thermal noise is calculated using 10log10(K*T*B) K = Boltzmann's constant T = room temperature B = bandwidth */
thermal_noise = -174 + 10*log10(eNB2UE->BW*1e6); //value in dBm
thermal_noise = -174 + 10*log10(eNB2UE->sampling_rate*1e6); //value in dBm
for (count = 0; count < 12 * nb_rb; count++) {
sir = enb_data->tx_power_dBm
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment