Commit 5c607644 authored by knopp's avatar knopp

testing FEP parrelization, default set back to single-thread. Reduced logging in MAC

parent 8420dce1
......@@ -165,9 +165,10 @@ void PHY_ofdm_mod(int *input, /// pointer to complex input
if (fftsize==128)
#endif
{
for (j=0; j<fftsize ; j++) {
/*for (j=0; j<fftsize ; j++) {
output_ptr[j] = temp_ptr[j];
}
}*/
memcpy((void*)output_ptr,(void*)temp_ptr,fftsize<<2);
}
j=fftsize;
......
......@@ -66,7 +66,7 @@ extern int oai_exit;
void feptx0(RU_t *ru,int slot) {
LTE_DL_FRAME_PARMS *fp = &ru->frame_parms;
int dummy_tx_b[7680*2] __attribute__((aligned(32)));
//int dummy_tx_b[7680*2] __attribute__((aligned(32)));
unsigned int aa,slot_offset;
int i,j, tx_offset;
......@@ -82,20 +82,20 @@ void feptx0(RU_t *ru,int slot) {
for (aa=0; aa<ru->nb_tx; aa++) {
if (fp->Ncp == EXTENDED) PHY_ofdm_mod(&ru->common.txdataF_BF[aa][slot*slot_sizeF],
dummy_tx_b,
fp->ofdm_symbol_size,
6,
fp->nb_prefix_samples,
CYCLIC_PREFIX);
(int*)&ru->common.txdata[aa][slot_offset],
fp->ofdm_symbol_size,
6,
fp->nb_prefix_samples,
CYCLIC_PREFIX);
else normal_prefix_mod(&ru->common.txdataF_BF[aa][slot*slot_sizeF],
dummy_tx_b,
7,
fp);
(int*)&ru->common.txdata[aa][slot_offset],
7,
fp);
/*
len = fp->samples_per_tti>>1;
// cyclic extension
if ((slot_offset+len)>(LTE_NUMBER_OF_SUBFRAMES_PER_FRAME*fp->samples_per_tti)) {
tx_offset = (int)slot_offset;
txdata = (int16_t*)&ru->common.txdata[aa][tx_offset];
......@@ -111,20 +111,17 @@ void feptx0(RU_t *ru,int slot) {
else {
tx_offset = (int)slot_offset;
txdata = (int16_t*)&ru->common.txdata[aa][tx_offset];
for (i=0; i<(len<<1); i++) {
txdata[i] = ((int16_t*)dummy_tx_b)[i];
}
memcpy((void*)txdata,(void*)dummy_tx_b,len<<2);
}
*/
// TDD: turn on tx switch N_TA_offset before by setting buffer in these samples to 0
if ((slot == 0) &&
((((fp->tdd_config==0) ||
(fp->tdd_config==1) ||
(fp->tdd_config==2) ||
(fp->tdd_config==6)) &&
(subframe==0)) || (subframe==5))) {
(fp->frame_type == TDD) &&
((fp->tdd_config==0) ||
(fp->tdd_config==1) ||
(fp->tdd_config==2) ||
(fp->tdd_config==6)) &&
((subframe==0) || (subframe==5))) {
for (i=0; i<ru->N_TA_offset; i++) {
tx_offset = (int)slot_offset+i-ru->N_TA_offset/2;
if (tx_offset<0)
......@@ -136,9 +133,6 @@ void feptx0(RU_t *ru,int slot) {
ru->common.txdata[aa][tx_offset] = 0x00000000;
}
}
LOG_D(PHY,"feptx_ofdm (TXPATH): frame %d, subframe %d: txp (time %p) %d dB, txp (freq) %d dB\n",
ru->proc.frame_tx,subframe,txdata,dB_fixed(signal_energy((int32_t*)txdata,fp->samples_per_tti)),
dB_fixed(signal_energy_nodc(ru->common.txdataF_BF[aa],2*slot_sizeF)));
}
}
......@@ -177,7 +171,7 @@ void feptx_ofdm_2thread(RU_t *ru) {
wait.tv_sec=0;
wait.tv_nsec=5000000L;
start_meas(&ru->ofdm_demod_stats);
start_meas(&ru->ofdm_mod_stats);
if (subframe_select(fp,subframe) == SF_UL) return;
......@@ -209,12 +203,10 @@ void feptx_ofdm_2thread(RU_t *ru) {
}
// call first slot in this thread
feptx0(ru,0);
wait_on_busy_condition(&proc->mutex_feptx,&proc->cond_feptx,&proc->instance_cnt_feptx,"feptx thread");
stop_meas(&ru->ofdm_demod_stats);
stop_meas(&ru->ofdm_mod_stats);
}
......@@ -329,11 +321,12 @@ void feptx_ofdm(RU_t *ru) {
}
}
*/
if ((((fp->tdd_config==0) ||
(fp->tdd_config==1) ||
(fp->tdd_config==2) ||
(fp->tdd_config==6)) &&
(subframe==0)) || (subframe==5)) {
if ((fp->frame_type == TDD) &&
((fp->tdd_config==0) ||
(fp->tdd_config==1) ||
(fp->tdd_config==2) ||
(fp->tdd_config==6)) &&
((subframe==0) || (subframe==5))) {
// turn on tx switch N_TA_offset before
//LOG_D(HW,"subframe %d, time to switch to tx (N_TA_offset %d, slot_offset %d) \n",subframe,ru->N_TA_offset,slot_offset);
for (i=0; i<ru->N_TA_offset; i++) {
......
......@@ -388,7 +388,7 @@ void generate_Msg2(module_id_t module_idP,int CC_idP,frame_t frameP,sub_frame_t
{
if ((RA_template->Msg2_frame == frameP) && (RA_template->Msg2_subframe == subframeP)) {
LOG_I(MAC,"[eNB %d] CC_id %d Frame %d, subframeP %d: Generating RAR DCI, RA_active %d format 1A (%d,%d))\n",
LOG_D(MAC,"[eNB %d] CC_id %d Frame %d, subframeP %d: Generating RAR DCI, RA_active %d format 1A (%d,%d))\n",
module_idP, CC_idP, frameP, subframeP,
RA_template->RA_active,
......@@ -860,7 +860,7 @@ void generate_Msg4(module_id_t module_idP,int CC_idP,frame_t frameP,sub_frame_t
1, // ndi
0, // rv
0); // vrb_flag
LOG_I(MAC,"Frame %d, subframe %d: Msg4 DCI pdu_num %d (rnti %x,rnti_type %d,harq_pid %d, resource_block_coding (%p) %d\n",
LOG_D(MAC,"Frame %d, subframe %d: Msg4 DCI pdu_num %d (rnti %x,rnti_type %d,harq_pid %d, resource_block_coding (%p) %d\n",
frameP,
subframeP,
dl_req->number_pdu,
......@@ -947,7 +947,7 @@ void generate_Msg4(module_id_t module_idP,int CC_idP,frame_t frameP,sub_frame_t
(cc->p_eNB==1 ) ? 1 : 2, // transmission mode
1, // num_bf_prb_per_subband
1); // num_bf_vector
LOG_I(MAC,"Filled DLSCH config, pdu number %d, non-dci pdu_index %d\n",dl_req->number_pdu,eNB->pdu_index[CC_idP]);
LOG_D(MAC,"Filled DLSCH config, pdu number %d, non-dci pdu_index %d\n",dl_req->number_pdu,eNB->pdu_index[CC_idP]);
// DL request
eNB->TX_req[CC_idP].sfn_sf = fill_nfapi_tx_req(&eNB->TX_req[CC_idP].tx_request_body,
......@@ -1082,7 +1082,7 @@ void check_Msg4_retransmission(module_id_t module_idP,int CC_idP,frame_t frameP,
dl_req->number_dci++;
dl_req->number_pdu++;
LOG_I(MAC,"msg4 retransmission for rnti %x (round %d) fsf %d/%d\n", RA_template->rnti, round, frameP, subframeP);
LOG_D(MAC,"msg4 retransmission for rnti %x (round %d) fsf %d/%d\n", RA_template->rnti, round, frameP, subframeP);
// DLSCH Config
fill_nfapi_dlsch_config(eNB,
dl_req,
......@@ -1164,7 +1164,7 @@ void schedule_RA(module_id_t module_idP,frame_t frameP, sub_frame_t subframeP)
if (RA_template->RA_active == TRUE) {
LOG_I(MAC,"[eNB %d][RAPROC] Frame %d, Subframe %d : CC_id %d RA %d is active (generate RAR %d, generate_Msg4 %d, wait_ack_Msg4 %d, rnti %x)\n",
LOG_D(MAC,"[eNB %d][RAPROC] Frame %d, Subframe %d : CC_id %d RA %d is active (generate RAR %d, generate_Msg4 %d, wait_ack_Msg4 %d, rnti %x)\n",
module_idP,frameP,subframeP,CC_id,i,RA_template->generate_rar,RA_template->generate_Msg4,RA_template->wait_ack_Msg4, RA_template->rnti);
if (RA_template->generate_rar == 1) generate_Msg2(module_idP,CC_id,frameP,subframeP,RA_template);
......
......@@ -148,7 +148,7 @@ void rx_sdu(const module_id_t enb_mod_idP,
"maxHARQ %d should be greater than 1\n",
(int)eNB->common_channels[CC_idP].radioResourceConfigCommon->rach_ConfigCommon.maxHARQ_Msg3Tx);
LOG_I(MAC,"[eNB %d][PUSCH %d] CC_id %d Received ULSCH sdu round %d from PHY (rnti %x, RA_id %d) ul_cqi %d\n",enb_mod_idP,harq_pid,CC_idP,
LOG_D(MAC,"[eNB %d][PUSCH %d] CC_id %d Received ULSCH sdu round %d from PHY (rnti %x, RA_id %d) ul_cqi %d\n",enb_mod_idP,harq_pid,CC_idP,
RA_template[RA_id].msg3_round,
rntiP,RA_id,ul_cqi);
......
......@@ -1336,6 +1336,7 @@ static void* ru_stats_thread(void* param) {
if (ru->feptx_ofdm) print_meas(&ru->ofdm_mod_stats,"feptx_ofdm",NULL,NULL);
}
}
return(NULL);
}
static void* ru_thread( void* param ) {
......@@ -1581,7 +1582,10 @@ int start_rf(RU_t *ru) {
extern void fep_full(RU_t *ru);
extern void ru_fep_full_2thread(RU_t *ru);
extern void feptx_ofdm(RU_t *ru);
extern void feptx_ofdm_2thread(RU_t *ru);
extern void feptx_prec(RU_t *ru);
extern void init_fep_thread(RU_t *ru,pthread_attr_t *attr);
extern void init_feptx_thread(RU_t *ru,pthread_attr_t *attr);
void init_RU_proc(RU_t *ru) {
......@@ -1665,7 +1669,10 @@ void init_RU_proc(RU_t *ru) {
}
init_fep_thread(ru,NULL);
if (get_nprocs()>=2) {
if (ru->feprx) init_fep_thread(ru,NULL);
if (ru->feptx_ofdm) init_feptx_thread(ru,NULL);
}
if (opp_enabled == 1) pthread_create(&ru->ru_stats_thread,NULL,ru_stats_thread,(void*)ru);
}
......@@ -1920,8 +1927,8 @@ void init_RU(char *rf_config_file) {
ru->fh_north_out = fh_if4p5_north_out; // send_IF4p5 on reception
ru->fh_south_out = tx_rf; // send output to RF
ru->fh_north_asynch_in = fh_if4p5_north_asynch_in; // TX packets come asynchronously
ru->feprx = (get_nprocs()<=2) ? fep_full :fep_full; // RX DFTs
ru->feptx_ofdm = feptx_ofdm; // this is fep with idft only (no precoding in RRU)
ru->feprx = (get_nprocs()<=4) ? fep_full :ru_fep_full_2thread; // RX DFTs
ru->feptx_ofdm = (get_nprocs()<=4) ? feptx_ofdm : feptx_ofdm_2thread; // this is fep with idft only (no precoding in RRU)
ru->feptx_prec = NULL;
ru->start_if = start_if; // need to start the if interface for if4p5
ru->ifdevice.host_type = RRU_HOST;
......@@ -1938,8 +1945,8 @@ void init_RU(char *rf_config_file) {
}
else if (ru->function == eNodeB_3GPP) {
ru->do_prach = 0; // no prach processing in RU
ru->feprx = (get_nprocs()<=2) ? fep_full : ru_fep_full_2thread; // RX DFTs
ru->feptx_ofdm = feptx_ofdm; // this is fep with idft and precoding
ru->feprx = (get_nprocs()<=4) ? fep_full : ru_fep_full_2thread; // RX DFTs
ru->feptx_ofdm = (get_nprocs()<=4) ? feptx_ofdm : feptx_ofdm_2thread; // this is fep with idft and precoding
ru->feptx_prec = feptx_prec; // this is fep with idft and precoding
ru->fh_north_in = NULL; // no incoming fronthaul from north
ru->fh_north_out = NULL; // no outgoing fronthaul to north
......@@ -1968,7 +1975,7 @@ void init_RU(char *rf_config_file) {
ru->do_prach = 0;
ru->feprx = (get_nprocs()<=2) ? fep_full : fep_full; // this is frequency-shift + DFTs
ru->feptx_prec = feptx_prec; // need to do transmit Precoding + IDFTs
ru->feptx_ofdm = feptx_ofdm; // need to do transmit Precoding + IDFTs
ru->feptx_ofdm = (get_nprocs()<=2) ? feptx_ofdm : feptx_ofdm_2thread; // need to do transmit Precoding + IDFTs
if (ru->if_timing == synch_to_other) {
ru->fh_south_in = fh_slave_south_in; // synchronize to master
ru->fh_south_out = fh_if5_mobipass_south_out; // use send_IF5 for mobipass
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment