Commit 75602a12 authored by nikaeinn's avatar nikaeinn

correct tx_shift paremeter in config files for rrh and usrp

parent 9764c924
......@@ -150,7 +150,7 @@ rrh_gw_config = (
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 5;
iq_txshift = 4;
tx_sample_advance = 113;
tx_scheduling_advance = 9;
......@@ -163,8 +163,6 @@ rrh_gw_config = (
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
......@@ -133,7 +133,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
mme_ip_address = ( { ipv4 = "192.168.12.170";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -145,14 +145,14 @@ rrh_gw_config = (
local_if_name = "eth0";
#remote_address = "169.254.10.158";
#local_address = "169.254.8.15";
remote_address = "74:d4:35:cc:88:45";
local_address = "98:90:96:df:66:07";
remote_address = "74:d4:35:cc:88:e3";
local_address = "74:d4:35:cc:88:d1";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 5;
iq_txshift = 4;
tx_sample_advance = 70;
tx_scheduling_advance = 9;
......@@ -162,12 +162,11 @@ rrh_gw_config = (
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.240/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.240/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment