Commit 75baa396 authored by knopp's avatar knopp

Rework of UE in lte-softmodem.c for ExpressMIMO2 target

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6484 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent efdf9907
......@@ -45,7 +45,7 @@
#include "SCHED/extern.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
//#define PRACH_DEBUG 1
#define PRACH_DEBUG 1
uint16_t NCS_unrestricted[16] = {0,13,15,18,22,26,32,38,46,59,76,93,119,167,279,419};
uint16_t NCS_restricted[15] = {15,18,22,26,32,38,46,55,68,82,100,128,158,202,237}; // high-speed case
......
......@@ -403,6 +403,7 @@ typedef struct
uint8_t Mod_id;
uint8_t CC_id;
uint8_t local_flag;
int is_synchronized;
int instance_cnt_tx;
int instance_cnt_rx;
int instance_cnt_synch;
......
This diff is collapsed.
......@@ -345,7 +345,7 @@ void ue_send_sdu(module_id_t module_idP, uint8_t CC_id,frame_t frameP,uint8_t *s
#ifdef DEBUG_HEADER_PARSING
LOG_D(MAC,"[UE] CE %d : UE Timing Advance : %d\n",i,payload_ptr[0]);
#endif
//mac_xface->process_timing_advance(module_idP,payload_ptr[0]);
mac_xface->process_timing_advance(module_idP,CC_id,payload_ptr[0]);
payload_ptr++;
break;
case DRX_CMD:
......
......@@ -77,9 +77,15 @@ struct vcd_module_s {
const char* eurecomVariablesNames[] = {
"frame_number_TX_eNB",
"frame_number_RX_eNB",
"frame_number_UE",
"slot_number_UE",
"frame_number_TX_UE",
"frame_number_RX_UE",
"slot_number_TX_UE",
"slot_number_RX_UE",
"subframe_number_TX_UE",
"subframe_number_RX_UE",
"daq_mbox",
"rx_offset_mbox",
"ue_rx_offset",
"diff2",
"hw_subframe",
"hw_frame",
......@@ -164,6 +170,7 @@ const char* eurecomFunctionsNames[] = {
"phy_enb_prach_rx",
"phy_enb_pdcch_tx",
"phy_enb_rs_tx",
"phy_ue_generate_prach",
"phy_ue_ulsch_modulation",
"phy_ue_ulsch_encoding",
"phy_ue_ulsch_scrambling",
......
......@@ -50,9 +50,15 @@ typedef enum
{
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX_ENB = 0,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_RX_ENB,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_UE,
VCD_SIGNAL_DUMPER_VARIABLES_SLOT_NUMBER_UE,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX_UE,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_RX_UE,
VCD_SIGNAL_DUMPER_VARIABLES_SLOT_NUMBER_TX_UE,
VCD_SIGNAL_DUMPER_VARIABLES_SLOT_NUMBER_RX_UE,
VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX_UE,
VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_RX_UE,
VCD_SIGNAL_DUMPER_VARIABLES_DAQ_MBOX,
VCD_SIGNAL_DUMPER_VARIABLES_UE_OFFSET_MBOX,
VCD_SIGNAL_DUMPER_VARIABLES_UE_RX_OFFSET,
VCD_SIGNAL_DUMPER_VARIABLES_DIFF,
VCD_SIGNAL_DUMPER_VARIABLES_HW_SUBFRAME,
VCD_SIGNAL_DUMPER_VARIABLES_HW_FRAME,
......@@ -139,6 +145,7 @@ typedef enum {
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_PRACH_RX,
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_PDCCH_TX,
VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_ENB_RS_TX,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GENERATE_PRACH,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_ULSCH_MODULATION,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_ULSCH_ENCODING,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_ULSCH_SCRAMBLING,
......
......@@ -115,10 +115,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.82/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.171/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.82/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.171/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
......@@ -43,7 +43,7 @@ eNBs =
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 50;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
......
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
frame_type = "TDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 39;
downlink_frequency = 1907600000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 10;
rx_gain = 10;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 0;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -95;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 2;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 6;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
......@@ -114,10 +114,10 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.171/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.171/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......@@ -135,7 +135,7 @@ eNBs =
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="debug";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
......
......@@ -164,7 +164,7 @@ CFLAGS += -DSMBV
endif
CFLAGS += -DPHYSIM -DUSER_MODE -DPC_TARGET -DPC_DSP -DNB_ANTENNAS_RX=2 -DNB_ANTENNAS_TXRX=2 -DNB_ANTENNAS_TX=2 -DPHY_CONTEXT=1
CFLAGS += -DOPENAIR_LTE -DENABLE_FXP -DOPENAIR1 -DDLSCH_THREAD #-DULSCH_THREAD
CFLAGS += -DOPENAIR_LTE -DENABLE_FXP -DOPENAIR1 #-DDLSCH_THREAD #-DULSCH_THREAD
ifeq ($(EXMIMO),1)
......
This diff is collapsed.
......@@ -187,7 +187,7 @@ static void * rx_pdsch_thread(void *param) {
//time0 = rt_get_time_ns();
// rt_printk("[SCHED][RX_PDSCH][before rx_pdsch] Frame %d, slot %d, time %llu\n",UE->frame,last_slot,rt_get_time_ns());
for (m=pilot2;m<UE->lte_frame_parms.symbols_per_tti;m++) {
rx_pdsch(UE,
PDSCH,
eNB_id,
......
[*]
[*] GTKWave Analyzer v3.3.58 (w)1999-2014 BSI
[*] Sat Jan 3 21:45:58 2015
[*] Thu Feb 5 10:38:10 2015
[*]
[dumpfile] "/tmp/openair_dump_UE.vcd"
[dumpfile_mtime] "Sat Jan 3 21:45:33 2015"
[dumpfile_size] 98393197
[savefile] "/home/haswell/openair4G_knopp/targets/RT/USER/ue.gtkw"
[timestart] 72755430000
[dumpfile_mtime] "Thu Feb 5 10:38:10 2015"
[dumpfile_size] 63195810
[savefile] "/home/ephese/openair4G/targets/RT/USER/ue.gtkw"
[timestart] 55175040000
[size] 1221 600
[pos] 251 123
*-21.000000 72759034000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[pos] -1 -1
*-17.000000 55175269780 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[sst_width] 224
[signals_width] 262
[sst_expanded] 1
[sst_vpaned_height] 143
@24
variables.hw_subframe[63:0]
variables.frame_number_UE[63:0]
@25
variables.slot_number_UE[63:0]
@28
functions.phy_procedures_ue_rx
functions.phy_procedures_ue_tx
@24
variables.frame_number_RX_UE[63:0]
variables.frame_number_TX_UE[63:0]
@25
variables.subframe_number_RX_UE[63:0]
variables.subframe_number_TX_UE[63:0]
@28
functions.ue_slot_fep
functions.lte_ue_measurement_procedures
functions.ue_rrc_measurements
......@@ -30,6 +35,7 @@ functions.lte_ue_pbch_procedures
functions.lte_ue_pdcch_procedures
functions.rx_pdcch
functions.dci_decoding
functions.phy_ue_generate_prach
functions.phy_ue_ulsch_encoding
functions.phy_ue_ulsch_modulation
functions.phy_ue_ulsch_scrambling
......
[*]
[*] GTKWave Analyzer v3.3.58 (w)1999-2014 BSI
[*] Thu Feb 5 10:24:50 2015
[*] Thu Feb 5 17:45:30 2015
[*]
[dumpfile] "/tmp/openair_dump_UE.vcd"
[dumpfile_mtime] "Thu Feb 5 10:24:33 2015"
[dumpfile_size] 57929998
[dumpfile_mtime] "Thu Feb 5 17:10:05 2015"
[dumpfile_size] 18764854
[savefile] "/home/ephese/openair4G/targets/RT/USER/ue_exmimo2.gtkw"
[timestart] 7161510000
[timestart] 4937140000
[size] 1463 640
[pos] 105 102
*-22.000000 7171400000 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
*-22.000000 4947033063 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[sst_width] 224
[signals_width] 262
[sst_expanded] 1
......@@ -19,13 +19,15 @@ variables.hw_subframe[63:0]
variables.daq_mbox[63:0]
variables.diff2[63:0]
variables.ue_rx_offset[63:0]
@25
variables.rx_offset_mbox[63:0]
@28
functions.rt_sleep
@24
variables.subframe_number_RX_UE[63:0]
variables.subframe_number_TX_UE[63:0]
variables.slot_number_RX_UE[63:0]
@25
variables.slot_number_RX_UE[63:0]
@28
functions.phy_procedures_ue_rx
functions.phy_procedures_ue_tx
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment