Commit 9c14a20b authored by Rohit Gupta's avatar Rohit Gupta

updates to USRP calibration + few modifications in config files

parent 10d6eccb
......@@ -620,16 +620,16 @@ extern "C" {
s->usrp->set_master_clock_rate(30.72e06);
openair0_cfg[0].samples_per_packet = 2048;
openair0_cfg[0].tx_sample_advance = 103;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_bw = 10e6;
openair0_cfg[0].rx_bw = 10e6;
openair0_cfg[0].tx_scheduling_advance = 10240;
break;
case 7680000:
s->usrp->set_master_clock_rate(30.72e6);
openair0_cfg[0].samples_per_packet = 1024;
openair0_cfg[0].tx_sample_advance = 80;
openair0_cfg[0].tx_bw = 20e6;
openair0_cfg[0].rx_bw = 20e6;
openair0_cfg[0].tx_bw = 5e6;
openair0_cfg[0].rx_bw = 5e6;
openair0_cfg[0].tx_scheduling_advance = 5*openair0_cfg[0].samples_per_packet;
break;
case 1920000:
......@@ -656,8 +656,8 @@ extern "C" {
for(i=0;i<s->usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
//s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
//printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i],i);
set_rx_gain_offset(&openair0_cfg[0],i,bw_gain_adjust);
......@@ -677,8 +677,8 @@ extern "C" {
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate,i);
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
//s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
//printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i],i);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i],i);
}
......@@ -707,6 +707,16 @@ extern "C" {
std::cout << boost::format("tx_max_num_samps %u") % (s->tx_stream->get_max_num_samps()) << std::endl;
/* Setting TX/RX BW after streamers are created due to USRP calibration issue */
for(i=0;i<s->usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw,i);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw,i);
printf("Setting tx freq/gain on channel %lu/%lu: BW %f (readback %f)\n",i,s->usrp->get_tx_num_channels(),openair0_cfg[0].tx_bw/1e6,s->usrp->get_tx_bandwidth(i)/1e6);
printf("Setting rx freq/gain on channel %lu/%lu : BW %f (readback %f)\n",i,s->usrp->get_rx_num_channels(),openair0_cfg[0].rx_bw/1e6,s->usrp->get_rx_bandwidth(i)/1e6);
}
}
s->usrp->set_time_now(uhd::time_spec_t(0.0));
......
......@@ -64,9 +64,9 @@ eNBs =
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -80; /*-85;*/
pusch_p0_Nominal = -90; /*-85;*/
pusch_alpha = "AL1";
pucch_p0_Nominal = -108; /* -108 */
pucch_p0_Nominal = -100; /* -108 */
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
......
......@@ -64,15 +64,15 @@ eNBs =
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -100;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment