Commit 9dd101e3 authored by knopp's avatar knopp

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5859 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent f6818d46
......@@ -80,7 +80,7 @@ phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint8_t eNB_id) {
phy_vars_ue->rx_total_gain_dB = MIN_RF_GAIN;
}
printf("Gain control: rx_total_gain_dB = %d (max %d,rxpf %d)\n",phy_vars_ue->rx_total_gain_dB,MAX_RF_GAIN,rx_power_fil_dB);
LOG_D(PHY,"Gain control: rx_total_gain_dB = %d (max %d,rxpf %d)\n",phy_vars_ue->rx_total_gain_dB,MAX_RF_GAIN,rx_power_fil_dB);
#ifdef EXMIMO
......
......@@ -225,7 +225,7 @@ int lte_est_timing_advance_pusch(PHY_VARS_eNB* phy_vars_eNB,uint8_t UE_id,uint8_
max_pos_fil2 = ((max_pos_fil2 * coef) + (max_pos * ncoef)) >> 15;
#ifdef DEBUG_PHY
LOG_I(PHY,"frame %d: max_pos = %d, max_pos_fil = %d, sync_pos=%d\n",phy_vars_eNB->proc[sched_subframe].frame_rx,max_pos,max_pos_fil2,sync_pos);
LOG_D(PHY,"frame %d: max_pos = %d, max_pos_fil = %d, sync_pos=%d\n",phy_vars_eNB->proc[sched_subframe].frame_rx,max_pos,max_pos_fil2,sync_pos);
#endif //DEBUG_PHY
return(max_pos_fil2-sync_pos);
......
......@@ -3930,7 +3930,7 @@ void fill_CQI(void *o,UCI_format_t uci_format,PHY_MEASUREMENTS *meas,uint8_t eNB
else
sinr_tmp = (double) meas->wideband_cqi_avg[eNB_id];
LOG_I(PHY,"Filling CQI %f for eNB %d\n",sinr_tmp,eNB_id);
//LOG_I(PHY,"Filling CQI %f for eNB %d\n",sinr_tmp,eNB_id);
switch (uci_format) {
case wideband_cqi_rank1_2A:
......@@ -3963,7 +3963,7 @@ void fill_CQI(void *o,UCI_format_t uci_format,PHY_MEASUREMENTS *meas,uint8_t eNB
// this is the cba mcs uci for cba transmission
((HLC_subband_cqi_mcs_CBA_5MHz *)o)->mcs = 2; //fixme
((HLC_subband_cqi_mcs_CBA_5MHz *)o)->crnti = rnti;
LOG_I(PHY,"fill uci for cba rnti %x, mcs %d \n", rnti, 2);
LOG_D(PHY,"fill uci for cba rnti %x, mcs %d \n", rnti, 2);
break;
case ue_selected:
LOG_E(PHY,"fill_CQI ue_selected CQI not supported yet!!!\n");
......@@ -4521,10 +4521,10 @@ int generate_eNB_ulsch_params_from_dci(void *dci_pdu,
// uint32_t hopping;
// uint32_t type;
//#ifdef DEBUG_DCI
LOG_I(PHY,"filling eNB ulsch params for rnti %x, dci format %d, dci %x, subframe %d\n",
#ifdef DEBUG_DCI
LOG_D(PHY,"filling eNB ulsch params for rnti %x, dci format %d, dci %x, subframe %d\n",
rnti,dci_format,*(uint32_t*)dci_pdu,subframe);
//#endif
#endif
if (dci_format == format0) {
......@@ -4660,9 +4660,9 @@ int generate_eNB_ulsch_params_from_dci(void *dci_pdu,
return(-1);
}
//#ifdef DEBUG_DCI
LOG_I(PHY,"generate_eNB_ulsch_params_from_dci: subframe %d, rnti %x,harq_pid %d,ndi %d,cqi_req %d\n",subframe,rnti,harq_pid,ndi,cqi_req);
//#endif
#ifdef DEBUG_DCI
LOG_D(PHY,"generate_eNB_ulsch_params_from_dci: subframe %d, rnti %x,harq_pid %d,ndi %d,cqi_req %d\n",subframe,rnti,harq_pid,ndi,cqi_req);
#endif
ulsch->harq_processes[harq_pid]->dci_alloc = 1;
ulsch->harq_processes[harq_pid]->rar_alloc = 0;
......
......@@ -277,7 +277,9 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode) {
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#else
#ifndef USRP
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
// SSS detection
......
......@@ -148,9 +148,9 @@ uint8_t is_SR_subframe(PHY_VARS_eNB *phy_vars_eNB,uint8_t UE_id,uint8_t sched_su
int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB) {
uint8_t i;
//#ifdef DEBUG_PHY_PROC
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d] Adding UE with rnti %x\n",phy_vars_eNB->Mod_id,rnti);
//#endif
#endif
for (i=0;i<NUMBER_OF_UE_MAX;i++) {
if ((phy_vars_eNB->dlsch_eNB[i]==NULL) || (phy_vars_eNB->ulsch_eNB[i]==NULL)) {
LOG_E(PHY,"Can't add UE, not enough memory allocated\n");
......@@ -172,9 +172,9 @@ int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB) {
int32_t remove_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB, uint8_t abstraction_flag) {
uint8_t i;
//#ifdef DEBUG_PHY_PROC
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"eNB %d removing UE with rnti %x\n",phy_vars_eNB->Mod_id,rnti);
//#endif
#endif
for (i=0;i<NUMBER_OF_UE_MAX;i++) {
if ((phy_vars_eNB->dlsch_eNB[i]==NULL) || (phy_vars_eNB->ulsch_eNB[i]==NULL)) {
LOG_E(PHY,"Can't remove UE, not enough memory allocated\n");
......@@ -347,7 +347,7 @@ int get_nCCE_offset(unsigned char L, int nCCE, int common_dci, unsigned short rn
break;
}
LOG_I(PHY,"rnti %x, Yk = %d, nCCE %d (nCCE/L %d),nb_cand %d\n",rnti,Yk,nCCE,nCCE/L,nb_candidates);
// LOG_I(PHY,"rnti %x, Yk = %d, nCCE %d (nCCE/L %d),nb_cand %d\n",rnti,Yk,nCCE,nCCE/L,nb_candidates);
for (m = 0 ; m < nb_candidates ; m++) {
search_space_free = 1;
......@@ -1508,7 +1508,7 @@ void phy_procedures_eNB_TX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
LOG_E(PHY,"[eNB %d] Frame %d subframe %d : No available CCE resources for common DCI (RA) !!!\n",phy_vars_eNB->Mod_id,phy_vars_eNB->proc[sched_subframe].frame_tx,subframe);
}
else {
LOG_I(PHY,"[eNB %d] Frame %d subframe %d : CCE resource for common DCI (RA) => %d/%d\n",phy_vars_eNB->Mod_id,phy_vars_eNB->proc[sched_subframe].frame_tx,subframe,
LOG_D(PHY,"[eNB %d] Frame %d subframe %d : CCE resource for common DCI (RA) => %d/%d\n",phy_vars_eNB->Mod_id,phy_vars_eNB->proc[sched_subframe].frame_tx,subframe,
phy_vars_eNB->dlsch_eNB_ra->nCCE[subframe],DCI_pdu->nCCE);
#if defined(SMBV) && !defined(EXMIMO)
// configure RA DCI
......@@ -1618,7 +1618,7 @@ void phy_procedures_eNB_TX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
}
#ifdef DEBUG_PHY_PROC
//if (phy_vars_eNB->proc[sched_subframe].frame_tx%100 == 0)
LOG_I(PHY,"[eNB %d][PUSCH %d] Frame %d subframe %d UL Frame %d, UL Subframe %d, Generated ULSCH (format0) DCI (rnti %x, dci %x) (DCI pos %d/%d), aggregation %d\n",
LOG_D(PHY,"[eNB %d][PUSCH %d] Frame %d subframe %d UL Frame %d, UL Subframe %d, Generated ULSCH (format0) DCI (rnti %x, dci %x) (DCI pos %d/%d), aggregation %d\n",
phy_vars_eNB->Mod_id,
subframe2harq_pid(&phy_vars_eNB->lte_frame_parms,
pdcch_alloc2ul_frame(&phy_vars_eNB->lte_frame_parms,phy_vars_eNB->proc[sched_subframe].frame_tx,subframe),
......@@ -2992,7 +2992,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
if (phy_vars_eNB->ulsch_eNB[i]->cqi_crc_status == 1) {
#ifdef DEBUG_PHY_PROC
//if (((phy_vars_eNB->proc[sched_subframe].frame_tx%10) == 0) || (phy_vars_eNB->proc[sched_subframe].frame_tx < 50))
print_CQI(phy_vars_eNB->ulsch_eNB[i]->o,phy_vars_eNB->ulsch_eNB[i]->uci_format,0);
//print_CQI(phy_vars_eNB->ulsch_eNB[i]->o,phy_vars_eNB->ulsch_eNB[i]->uci_format,0);
#endif
extract_CQI(phy_vars_eNB->ulsch_eNB[i]->o,phy_vars_eNB->ulsch_eNB[i]->uci_format,&phy_vars_eNB->eNB_UE_stats[i], &rnti, &access_mode);
phy_vars_eNB->eNB_UE_stats[i].rank = phy_vars_eNB->ulsch_eNB[i]->o_RI[0];
......@@ -3221,7 +3221,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
}
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d] frame %d, subframe %d: user %d in sector %d: timing advance = %d\n",
LOG_D(PHY,"[eNB %d] frame %d, subframe %d: user %d in sector %d: timing advance = %d\n",
phy_vars_eNB->Mod_id,
frame, subframe,
i, sect_id,
......@@ -3246,8 +3246,8 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
0,
0);
//#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d] Frame %d subframe %d, sect %d: received ULSCH harq_pid %d for UE %d, ret = %d, CQI CRC Status %d, ACK %d,%d, ulsch_errors %d/%d\n",
#ifdef DEBUG_PHY_PROC
LOG_D(PHY,"[eNB %d] Frame %d subframe %d, sect %d: received ULSCH harq_pid %d for UE %d, ret = %d, CQI CRC Status %d, ACK %d,%d, ulsch_errors %d/%d\n",
phy_vars_eNB->Mod_id,frame,subframe,
phy_vars_eNB->eNB_UE_stats[i].sector,
harq_pid,
......@@ -3258,7 +3258,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
phy_vars_eNB->ulsch_eNB[i]->o_ACK[1],
phy_vars_eNB->eNB_UE_stats[i].ulsch_errors[harq_pid],
phy_vars_eNB->eNB_UE_stats[i].ulsch_decoding_attempts[harq_pid][0]);
//#endif
#endif
}
......@@ -3317,7 +3317,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
#endif
if (SR_payload == 1) {
LOG_I(PHY,"[eNB %d][SR %x] Frame %d subframe %d Got SR for PUSCH, transmitting to MAC\n",phy_vars_eNB->Mod_id,
LOG_D(PHY,"[eNB %d][SR %x] Frame %d subframe %d Got SR for PUSCH, transmitting to MAC\n",phy_vars_eNB->Mod_id,
phy_vars_eNB->ulsch_eNB[i]->rnti,frame,subframe);
phy_vars_eNB->eNB_UE_stats[i].sr_received++;
if (phy_vars_eNB->first_sr[i] == 1) { // this is the first request for uplink after Connection Setup, so clear HARQ process 0 use for Msg4
......@@ -3361,7 +3361,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
#endif
}
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d pucch1a (FDD) payload %d (metric %d)\n",
LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d pucch1a (FDD) payload %d (metric %d)\n",
phy_vars_eNB->Mod_id,
phy_vars_eNB->dlsch_eNB[i][0]->rnti,
frame,subframe,
......@@ -3395,7 +3395,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
// if SR was detected, use the n1_pucch from SR
if (SR_payload==1) {
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d with SR\n",phy_vars_eNB->Mod_id,
LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d with SR\n",phy_vars_eNB->Mod_id,
phy_vars_eNB->dlsch_eNB[i][0]->rnti,
frame,subframe,
n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,format);
......@@ -3422,7 +3422,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
}
else { //using n1_pucch0/n1_pucch1 resources
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d\n",phy_vars_eNB->Mod_id,
LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d Checking ACK/NAK (%d,%d,%d,%d) format %d\n",phy_vars_eNB->Mod_id,
phy_vars_eNB->dlsch_eNB[i][0]->rnti,
frame,subframe,
n1_pucch0,n1_pucch1,n1_pucch2,n1_pucch3,format);
......@@ -3496,7 +3496,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
pucch_sel = 2; // indicate that this is a bundled ACK/NAK
}
#ifdef DEBUG_PHY_PROC
LOG_I(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d ACK/NAK metric 0 %d, metric 1 %d, sel %d, (%d,%d)\n",phy_vars_eNB->Mod_id,
LOG_D(PHY,"[eNB %d][PDSCH %x] Frame %d subframe %d ACK/NAK metric 0 %d, metric 1 %d, sel %d, (%d,%d)\n",phy_vars_eNB->Mod_id,
phy_vars_eNB->dlsch_eNB[i][0]->rnti,
frame,subframe,
metric0,metric1,pucch_sel,pucch_payload[0],pucch_payload[1]);
......@@ -3648,7 +3648,7 @@ void phy_procedures_eNB_RX(unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_e
#endif
#endif
if (access_mode > UNKNOWN_ACCESS){
LOG_I(PHY,"[eNB %d] Frame %d, Subframe %d : received ULSCH SDU from CBA transmission, UE (%d,%x), CBA (group %d, rnti %x)\n",
LOG_D(PHY,"[eNB %d] Frame %d, Subframe %d : received ULSCH SDU from CBA transmission, UE (%d,%x), CBA (group %d, rnti %x)\n",
phy_vars_eNB->Mod_id, frame,subframe,
i, phy_vars_eNB->ulsch_eNB[i]->rnti,
i % phy_vars_eNB->ulsch_eNB[i]->num_active_cba_groups, phy_vars_eNB->ulsch_eNB[i]->cba_rnti[i%num_active_cba_groups]);
......@@ -3781,7 +3781,7 @@ void phy_procedures_eNB_lte(unsigned char subframe,PHY_VARS_eNB **phy_vars_eNB,u
case PHY_MEAS_THRESHOLD_REQ:
#warning "TO DO LIST OF THRESHOLDS"
LOG_I(PHY, "[ENB %d] Received %s\n", Mod_id, msg_name);
LOG_D(PHY, "[ENB %d] Received %s\n", Mod_id, msg_name);
{
ral_threshold_phy_t* threshold_phy_p = NULL;
int index, res;
......
......@@ -1499,9 +1499,9 @@ void lte_ue_measurement_procedures(uint16_t l, PHY_VARS_UE *phy_vars_ue,uint8_t
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id],0);
#else
#ifndef USRP
phy_adjust_gain (phy_vars_ue,0);
#endif
#endif
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_GAIN_CONTROL, VCD_FUNCTION_OUT);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_ADJUST_SYNCH, VCD_FUNCTION_IN);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment