Commit 9ec462e8 authored by knopp's avatar knopp

debugging for IF4p5

parent f92a33b3
......@@ -261,6 +261,7 @@ void gen_IF4p5_dl_header(IF4p5_header_t *dl_packet, int frame, int subframe) {
void gen_IF4p5_ul_header(IF4p5_header_t *ul_packet, int frame, int subframe) {
ul_packet->type = IF4p5_PACKET_TYPE;
ul_packet->sub_type = IF4p5_PULFFT;
......
......@@ -160,10 +160,10 @@ enum transmission_access_mode {
typedef enum {
eNodeB_3GPP=0, // classical eNodeB function
eNodeB_3GPP_BBU, // eNodeB with NGFI IF5
NGFI_RRU_IF5, // NGFI_RRU with IF5
NGFI_RRU_IF4p5, // NGFI_RRU (NGFI remote radio-unit, currently split at common - ue_specific interface, IF4p5)
NGFI_RCC_IF4p5, // NGFI_RCC (NGFI radio cloud center, currently split at common - ue_specific interface, IF4p5)
NGFI_RAU_IF4p5
NGFI_RCC_IF4p5, // NGFI_RCC (NGFI radio cloud center)
NGFI_RAU_IF4p5,
NGFI_RRU_IF5, // NGFI_RRU (NGFI remote radio-unit,IF5)
NGFI_RRU_IF4p5 // NGFI_RRU (NGFI remote radio-unit,IF4p5)
} eNB_func_t;
typedef enum {
......
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "93";
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RRU_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -29;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.11";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.215/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth3";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.215/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
rrh_gw_config = (
{
local_if_name = "eth0";
remote_address = "34:e6:d7:3c:ae:fc";
local_address = "74:d4:35:cc:8d:15";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw_if4p5";
rf_preference = "usrp_b200";
iq_txshift = 4;
tx_sample_advance = 80;
tx_scheduling_advance = 9;
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
......@@ -1248,7 +1248,8 @@ static void* eNB_thread_FH( void* param ) {
printf( "got sync (eNB_thread_FH)\n" );
#if defined(ENABLE_ITTI)
wait_system_ready ("Waiting for eNB application to be ready %s\r", &start_eNB);
if (eNB->node_function < NGFI_RRU_IF5)
wait_system_ready ("Waiting for eNB application to be ready %s\r", &start_eNB);
#endif
......@@ -1938,45 +1939,12 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
sleep(1);
LOG_D(HW,"[lte-softmodem.c] eNB threads created\n");
/*
printf("Creating main eNB_thread \n");
error_code = pthread_create( &main_eNB_thread, &attr_dlsch_threads, eNB_thread, NULL );
if (error_code!= 0) {
LOG_D(HW,"[lte-softmodem.c] Could not allocate eNB_thread, error %d\n",error_code);
} else {
LOG_D( HW, "[lte-softmodem.c] Allocate eNB_thread successful\n" );
pthread_setname_np( main_eNB_thread, "main eNB" );
}
*/
}
void stop_eNB(int nb_inst) {
/*
#ifdef DEBUG_THREADS
printf("Joining eNB_thread ...");
#endif
int *eNB_thread_status_p;
int result = pthread_join( main_eNB_thread, (void**)&eNB_thread_status_p );
#ifdef DEBUG_THREADS
if (result != 0) {
printf( "\nError joining main_eNB_thread.\n" );
} else {
if (eNB_thread_status_p) {
printf( "status %d\n", *eNB_thread_status_p );
} else {
printf( "The thread was killed. No status available.\n");
}
}
#else
UNUSED(result);
#endif // DEBUG_THREADS
*/
for (int inst=0;inst<nb_inst;inst++) {
printf("Killing eNB %d processing threads\n",inst);
kill_eNB_proc(inst);
......
......@@ -1656,10 +1656,13 @@ int main( int argc, char **argv )
#if defined(ENABLE_ITTI)
if (create_tasks(UE_flag ? 0 : 1, UE_flag ? 1 : 0) < 0) {
printf("cannot create ITTI tasks\n");
exit(-1); // need a softer mode
}
if ((UE_flag == 1)||
(node_function[0]<NGFI_RAU_IF4p5))
// don't create if node doesn't connect to RRC/S1/GTP
if (create_tasks(UE_flag ? 0 : 1, UE_flag ? 1 : 0) < 0) {
printf("cannot create ITTI tasks\n");
exit(-1); // need a softer mode
}
printf("ITTI tasks created\n");
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment