Commit a0289d74 authored by Xenofon Foukas's avatar Xenofon Foukas

Added support for eNB, cell, UE and logical channel configuration messages to the progRAN protocol

parent bb874258
......@@ -713,6 +713,8 @@ if (ENB_AGENT_SB_IF)
${PRPT_MSG_DIR}/time_common.proto
${PRPT_MSG_DIR}/controller_commands.proto
${PRPT_MSG_DIR}/mac_primitives.proto
${PRPT_MSG_DIR}/config_messages.proto
${PRPT_MSG_DIR}/config_common.proto
)
set(PRPT_C_DIR ${protobuf_generated_dir}/${PRPTDIR})
......@@ -727,6 +729,8 @@ if (ENB_AGENT_SB_IF)
${PRPT_C_DIR}/time_common.pb-c.c
${PRPT_C_DIR}/controller_commands.pb-c.c
${PRPT_C_DIR}/mac_primitives.pb-c.c
${PRPT_C_DIR}/config_messages.pb-c.c
${PRPT_C_DIR}/config_common.pb-c.c
)
file(GLOB prpt_h ${PRPT_C_DIR}/*.h)
......
//'syntax = "proto2";'
package protocol;
//
// Cell config related structures and enums
//
message prp_si_config {
optional uint32 sfn = 1;
optional uint32 sib1_length = 2; // The length of SIB1 in bytes
optional uint32 si_window_length = 3; // The scheduling window for all SIs in SF
repeated prp_si_message si_message = 4; // List of SI messages to be sent.
// The index identifies the type of an SI message
// 0 - SIB1
// 1..31 - SIx
// 32..63 - PCCH
}
message prp_si_message {
optional uint32 periodicity = 1; // Periodicity of SI msg in radio frames
optional uint32 length = 2; // The length of the SI message in bytes
}
enum prp_hopping_mode {
PRHM_INTER = 0;
PRHM_INTERINTRA = 1;
}
enum prp_phich_resource {
PRPR_ONE_SIXTH = 0;
PRPR_HALF = 1;
PRPR_ONE = 2;
PRPR_TWO = 3;
}
enum prp_phich_duration {
PRPD_NORMAL = 0;
PRPD_EXTENDED = 1;
}
enum prp_ul_cyclic_prefix_length {
PRUCPL_NORMAL = 0;
PRUCPL_EXTENDED = 1;
}
enum prp_dl_cyclic_prefix_length {
PRDCPL_NORMAL = 0;
PRDCPL_EXTENDED = 1;
}
enum prp_duplex_mode {
PRDM_TDD = 0;
PRDM_FDD = 1;
}
enum prp_qam {
PREQ_MOD_16QAM = 0;
PREQ_MOD_64QAM = 1;
}
//
// UE config related structures and enums
//
message prp_drx_config {
optional uint32 on_duration_timer = 1; // Timer in SF. See TS 36.321
optional uint32 drx_inactivity_timer = 2; // Timer in SF. See TS 36.321
optional uint32 drx_retransmission_timer = 3; // Timer in SF. See TS 36.321
optional uint32 long_drx_cycle = 4; // In SF. See TS 36.321
optional uint32 long_drx_cycle_start_offset = 5;// See TS 36.321
optional uint32 short_drx_cycle = 6; // In SF
optional uint32 drx_short_cycle_timer = 7; // Timer in subframes. See TS 36.321
}
message prp_sps_config {
optional uint32 semi_persistent_sched_interval_UL = 1; // SPS UL scheduling interval in SF
optional uint32 semi_persistent_sched_interval_DL = 2; // SPS DL scheduling interval in SF
optional uint32 num_of_conf_sps_proc = 3; // Number of SPS HARQ processes. See TS 36.321
repeated uint32 n1_PUCCH_AN_persistent_element = 4;// See TS36.213. Ignored when config is used
// as part of PRPT_SET_UE_CONFIG
optional uint32 implicit_release_after = 5; // number of empty transmissions before release of SPS
}
message prp_sr_config {
optional uint32 sr_action = 1; // Indicates if SR config should be changed or released
// One of the PRSRA_* enum values
optional uint32 sched_interval = 2; // SR scheduling interval in SF
optional uint32 dsr_trans_max = 3; // See TS 36.213
}
message prp_cqi_config {
optional uint32 cqi_action = 1; // Indicats if CQI changed or released.
// One of the PRSRA_* enum values
optional uint32 cqi_sched_interval = 2; // CQI scheduling interval in SF
optional uint32 ri_sched_interval = 3; // RI scheduling interval in SF
}
message prp_ue_capabilities {
optional uint32 half_duplex = 1; // Boolean value. Only half duplex support. FDD operation
optional uint32 intra_SF_hopping = 2; // Support for intra-subframe hopping. Boolean value
optional uint32 type2_sb_1 = 3; // Support for type 2 hopping with n_sb > 1
optional uint32 ue_category = 4;
optional uint32 res_alloc_type1 = 5; // Boolean value. UE support for resource allocation type 1
}
message prp_scell_config {
optional uint32 carrier_index = 1; // Id of the carrier component
optional uint32 scell_index = 2; // Index of this Scell (RRC SCellIndex)
optional uint32 use_ccs = 3; // Boolean value. Indicates if cross-carrier scheduling
// is used by this SCell
optional uint32 sched_cell_index = 4; // Index of the cell responsible for scheduling
// this SCell if cross-carrier scheduling is enabled
optional uint32 pdsch_start = 5; // Starting OFDM symbol of PDSCH data region for this SCell
}
enum prp_meas_gap_config_pattern {
PRMGCP_GP1 = 0;
PRMGCP_GP2 = 1;
PRMGCP_OFF = 2;
}
enum prp_setup_release_action {
PRSRA_SETUP = 0;
PRSRA_RELEASE = 1;
}
enum prp_ue_transmission_antenna {
PRUTA_NONE = 0;
PRUTA_OPEN_LOOP = 1;
PRUTA_CLOSED_LOOP = 2;
}
enum prp_aperiodic_cqi_report_mode {
PRACRM_RM12 = 0;
PRACRM_RM20 = 1;
PRACRM_RM22 = 2;
PRACRM_RM30 = 3;
PRACRM_RM31 = 4;
PRACRM_NONE = 5;
}
enum prp_tdd_ack_nack_feedback_mode {
PRTANFM_BUNDLING = 0;
PRTANFM_MULTIPLEXING = 1;
}
//
// Logical channel config related structures and enums
//
message prp_lc_config {
optional uint32 lcid = 1; // The logical channel id
optional uint32 lcg = 2; // The logical channel group (0..3) the LC is mapped to
optional uint32 direction = 3; // The LC direction. One of the PRLCD_* enum values
optional uint32 qos_bearer_type = 4;// GBR or NGBR bearer. One of the PRQBT_* enum values
optional uint32 qci = 5; // The QCI defined in TS 23.203, coded as defined in TS 36.413
// One less than the actual QCI value
optional uint64 e_RAB_max_bitrate_UL = 6; // In bps (GBR only)
optional uint64 e_RAB_max_bitrate_DL = 7; // In bps (GBR only)
optional uint64 e_RAB_guaranteed_bitrate_UL = 8; // In bps (GBR only)
optional uint64 e_RAB_guranteed_bitrate_DL = 9; // In bps (GBR only)
}
enum prp_lc_direction {
PRLCD_UL = 0;
PRLCD_DL = 1;
PRLCD_BOTH = 2;
}
enum prp_qos_bearer_type {
PRQBT_NON_GBR = 0;
PRQBT_GBR = 1;
}
//'syntax = "proto2";'
package protocol;
import "config_common.proto";
message prp_cell_config {
optional uint32 phy_cell_id = 1; // The PCI of this cell
optional uint32 cell_id = 2; // The PLMN cell id of this cell
optional uint32 pusch_hopping_offset = 3; // PUSCH resources in RBs for hopping
optional uint32 hopping_mode = 4; // One of the PRHM_* enum values
optional uint32 n_sb = 5; // The number of subbands
optional uint32 phich_resource = 6; // The number of REGs used for PHICH
// One of the PRPR_* enum values
optional uint32 phich_duration = 7; // One of the PRPD_* enum values
optional uint32 init_nr_PDCCH_OFDM_sym = 8; // See TS 36.211, section 6.9
optional prp_si_config si_config = 9; // The SI configuration
optional uint32 dl_bandwidth = 10; // The DL transmission bandwidth in RBs
optional uint32 ul_bandwidth = 11; // The UL transmission bandwidth in RBs
optional uint32 ul_cyclic_prefix_length = 13; // One of the PRUCPL_* enum values
optional uint32 dl_cyclic_prefix_length = 14; // One of the PRDCPL_* enum values
optional uint32 antenna_ports_count = 15; // Number of cell specific antenna ports
optional uint32 duplex_mode = 16; // One of the PRDM_* enum values
optional uint32 subframe_assignment = 17; // DL/UL subframe assignment. TDD only
optional uint32 special_subframe_patterns = 18; // TDD only. See TS 36.211, table 4.2.1
repeated uint32 mbsfn_subframe_config_rfperiod = 19; // The MBSFN radio frame period (Optional)
repeated uint32 mbsfn_subframe_config_rfoffset = 20; // The radio frame offset (Optional)
repeated uint32 mbsfn_subframe_config_sfalloc = 21; // Bitmap indicating the MBSFN subframes (Optional)
optional uint32 prach_config_index = 22; // See TS 36.211, section 5.7.1
optional uint32 prach_freq_offset = 23; // See TS 36.211, section 5.7.1
optional uint32 ra_response_window_size = 24; // The duration of the RA response window in SF
optional uint32 mac_contention_resolution_timer = 25; // Timer for RA
optional uint32 max_HARQ_Msg3Tx = 26; // See TS 36.321
optional uint32 n1PUCCH_AN = 27; // See TS 36.213, section 10.1
optional uint32 deltaPUCCH_shift = 28; // See TS 36.211, section 5.4
optional uint32 nRB_cqi = 29; // See TS 36.211, section 5.4
optional uint32 srs_subframe_config = 30; // See TS 36.211, table 5.5.3.3-1 and 2
optional uint32 srs_bw_config = 31; // See TS 36.211, section 5.5.3.2
optional uint32 srs_mac_up_pts = 32; // Boolean value. See TS 36.211, section 5.5.3.2. TDD only
optional uint32 enable_64QAM = 33; // One of the PREQ_* enum values
optional uint32 carrier_index = 34; // Carrier component index
}
message prp_ue_config {
optional uint32 rnti = 1;
optional prp_drx_config drx_config = 2; // The DRX configuration (Optional)
optional uint32 time_alignment_timer = 3; // Timer in SF. Control the synchronization
// status of the UE, not the actual advance procedure
// See TS 36.321
optional uint32 meas_gap_config_pattern = 4; // Measurement gap configuration.
// One of the PRMGCP_* enum values
// See TS 36.133
optional uint32 meas_gap_config_sf_offset = 5; // Measurement gap offset if applicable
optional prp_sps_config sps_config = 6; // The SPS configuration (Optional)
optional prp_sr_config sr_config = 7; // The SR configuration (Optional)
optional prp_cqi_config cqi_config = 8; // The CQI configuration (Optional)
optional uint32 transmission_mode = 9; // The UE transmission mode
optional uint64 ue_aggregated_max_bitrate_UL = 10; // Aggregated bit-rate of non-gbr bearer
// per UE. See TS 36.413
optional uint64 ue_aggregated_max_bitrate_DL = 11; // Aggregated bit-rate of non-gbr bearer
// per UE. See TS 36.413
optional prp_ue_capabilities capabilities = 12;
optional uint32 ue_transmission_antenna = 13; // One of the PRUTA_* enum values
optional uint32 tti_bundling = 14; // Boolean value. See TS 36.321
optional uint32 max_HARQ_tx = 15; // The max HARQ retransmission for UL
optional uint32 beta_offset_ACK_index = 16; // See TS 36.213
optional uint32 beta_offset_RI_index = 17; // See TS 36.213
optional uint32 beta_offset_CQI_index = 18; // See TS 36.213
optional uint32 ack_nack_simultaneous_trans = 19;// Boolean. See TS 36.213
optional uint32 simultaneous_ack_nack_cqi = 20; // Boolean. See TS 36.213
optional uint32 aperiodic_cqi_rep_mode = 21; // One of the PRACRM_* enum values
optional uint32 tdd_ack_nack_feedback = 22; // One of the PRTANFM_* enum values
optional uint32 ack_nack_repetition_factor = 23;// See TS 36.213, section 10.1
optional uint32 extended_bsr_size = 24; // Boolean for extended BSR size
optional uint32 ca_support = 25; // Boolean. Support for carrier aggregation
optional uint32 cross_carrier_sched_support = 26; // Boolean value
optional uint32 pcell_carrier_index = 27; // Index of primary cell
repeated prp_scell_config scell_config = 28; // Secondary cells configuration
optional uint32 scell_deactivation_timer = 29;// Deactivation timer for secondary cell
}
message prp_lc_ue_config {
optional uint32 rnti = 1;
repeated prp_lc_config lc_config = 2; // A list of LC configurations for the given UE
}
......@@ -19,10 +19,18 @@ enum prp_type {
// Time indication messages
PRPT_SF_TRIGGER = 5;
//Asynchronous messages
// Asynchronous messages
PRPT_UL_SR_INFO = 6;
// eNB configuration messages
PRPT_GET_ENB_CONFIG_REQUEST = 7;
PRPT_GET_ENB_CONFIG_REPLY = 8;
PRPT_GET_UE_CONFIG_REQUEST = 9;
PRPT_GET_UE_CONFIG_REPLY = 10;
PRPT_GET_LC_CONFIG_REQUEST = 11;
PRPT_GET_LC_CONFIG_REPLY = 12;
//Controller command messages
PRPT_DL_MAC_CONFIG = 7;
PRPT_DL_MAC_CONFIG = 13;
}
......@@ -4,6 +4,7 @@ package protocol;
import "stats_messages.proto";
import "header.proto";
import "time_common.proto";
import "config_messages.proto";
import "controller_commands.proto";
message progran_message {
......@@ -16,7 +17,13 @@ message progran_message {
prp_stats_reply stats_reply_msg = 5;
prp_sf_trigger sf_trigger_msg = 6;
prp_ul_sr_info ul_sr_info_msg = 7;
prp_dl_mac_config dl_mac_config_msg = 8;
prp_enb_config_request enb_config_request = 8;
prp_enb_config_reply enb_config_reply = 9;
prp_ue_config_request ue_config_request = 10;
prp_ue_config_reply ue_config_reply = 11;
prp_lc_config_request lc_config_request = 12;
prp_lc_config_reply lc_config_reply = 13;
prp_dl_mac_config dl_mac_config_msg = 14;
}
}
......@@ -108,6 +115,37 @@ message prp_ul_sr_info {
repeated uint32 rnti = 3;
}
//
// eNB configuration messages
//
message prp_enb_config_request {
optional prp_header header = 1;
}
message prp_enb_config_reply {
optional prp_header header = 1;
optional uint32 eNB_id = 2; // Unique id to distinguish the eNB
repeated prp_cell_config cell_config = 3;
}
message prp_ue_config_request {
optional prp_header header = 1;
}
message prp_ue_config_reply {
optional prp_header header = 1;
repeated prp_ue_config ue_config = 2;
}
message prp_lc_config_request {
optional prp_header header = 1;
}
message prp_lc_config_reply {
optional prp_header header = 1;
repeated prp_lc_ue_config lc_ue_config = 2;
}
//
// Controller command messages
//
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment