Commit b46a34f3 authored by gauthier's avatar gauthier

epc ng40 config

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7301 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent c943c756
......@@ -62,15 +62,7 @@ MME :
# max values = 999.999:65535
# maximum of 32 values, comma separated
PLMN = (
{MCC="208" ; MNC="92"; TAC = "1"; },
{MCC="208" ; MNC="93"; TAC = "4"; },
{MCC="208" ; MNC="94"; TAC = "8"; },
{MCC="208" ; MNC="95"; TAC = "8"; },
{MCC="208" ; MNC="96"; TAC = "1"; },
{MCC="208" ; MNC="97"; TAC = "1"; },
{MCC="208" ; MNC="98"; TAC = "1"; },
{MCC="208" ; MNC="99"; TAC = "1"; },
{MCC="208" ; MNC="10"; TAC = "1"; }
{MCC="208" ; MNC="93"; TAC = "1"; }
);
};
......@@ -84,8 +76,8 @@ MME :
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_S1_MME = "eth0";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.17//24";
MME_INTERFACE_NAME_FOR_S1_MME = "eth2";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.27.101//24";
MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
......@@ -99,9 +91,9 @@ S-GW :
SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth0";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth2";
SGW_INTERFACE_MTU_FOR_S1U_S12_S4_UP = 1564
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.13.17/24";
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.27.101/24";
# TODO PORT NUMBER
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152;
......@@ -121,17 +113,17 @@ P-GW =
PGW_INTERFACE_NAME_FOR_S5_S8 = "none";
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth1";
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.14.17/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth0";
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.12.101/24";
# Option available only if GTPU in kernel configured
PGW_MASQUERADE_SGI = "no";
PGW_MASQUERADE_SGI = "yes";
};
IP_ADDRESS_POOL :
{
IPV4_LIST = (
"192.168.0.0/24",
"192.168.1.0/24"
"192.188.0.0/24",
"192.188.1.0/24"
);
IPV6_LIST = (
"2014:02:26::0/120"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment