Commit b8b5815d authored by Florian Kaltenberger's avatar Florian Kaltenberger

small changes, mostly config files

parent 4891d600
......@@ -313,6 +313,18 @@ void phy_init_lte_top(LTE_DL_FRAME_PARMS *lte_frame_parms);
//void copy_lte_parms_to_phy_framing(LTE_DL_FRAME_PARMS *frame_parm, PHY_FRAMING *phy_framing);
void lte_param_init(unsigned char N_tx,
unsigned char N_rx,
unsigned char transmission_mode,
uint8_t extended_prefix_flag,
frame_t frame_type,
uint16_t Nid_cell,
uint8_t tdd_config,
uint8_t N_RB_DL,
uint8_t threequarter_fs,
uint8_t osf,
uint32_t perfect_ce);
#ifdef Rel10
void phy_config_dedicated_scell_ue(uint8_t Mod_id,
uint8_t eNB_index,
......
......@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208";
mobile_network_code = "92";
mobile_network_code = "94";
////////// Physical parameters:
......@@ -135,7 +135,7 @@ eNBs =
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11";
mme_ip_address = ( { ipv4 = "192.168.12.70";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -144,11 +144,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
......@@ -142,11 +142,11 @@ eNBs =
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.147/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.150/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth1";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.147/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.150/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
......@@ -1272,6 +1272,28 @@ static void* eNB_thread_tx( void* param )
do_OFDM_mod_rt( proc->subframe_tx, PHY_vars_eNB_g[0][proc->CC_id] );
/*
if ((proc->frame_tx==100) && (proc->subframe_tx==9)) {
write_output("/tmp/eNBtxsig0.m","txs0",
PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdata[0][0],
PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.samples_per_tti*10,
1,1);
write_output("/tmp/eNBtxsig1.m","txs1",
PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdata[0][1],
PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.samples_per_tti*10,
1,1);
write_output("/tmp/eNBtxsigF0.m","txsF0",
PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdataF[0][0],
PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.symbols_per_tti*PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.ofdm_symbol_size*10,
1,1);
write_output("/tmp/eNBtxsigF1.m","txsF1",
PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdataF[0][1],
PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.symbols_per_tti*PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.ofdm_symbol_size*10,
1,1);
exit_fun("DEBUG: Exiting after writing files");
}
*/
/*
short *txdata = (short*)&PHY_vars_eNB_g[0][proc->CC_id]->lte_eNB_common_vars.txdata[0][0][proc->subframe_tx*PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.samples_per_tti];
int i;
for (i=0;i<PHY_vars_eNB_g[0][proc->CC_id]->lte_frame_parms.samples_per_tti*2;i+=8) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment