Commit d9ec978c authored by Florian Kaltenberger's avatar Florian Kaltenberger

Merge remote-tracking branch 'origin/develop' into enhancement-74-SoDeRa

Conflicts:
	cmake_targets/CMakeLists.txt
	cmake_targets/build_oai
	targets/ARCH/COMMON/common_lib.c
	targets/ARCH/COMMON/common_lib.h
	targets/RT/USER/lte-softmodem.c
parents 7998985d f65b478c
......@@ -20,9 +20,11 @@ job1:
- EXTERNAL_SHARE_RESULTS_DIR=$EXTERNAL_SHARE_DIR/$git_branch/$git_head
- echo $NFS_TEST_RESULTS_DIR
- echo $EXTERNAL_SHARE_RESULTS_DIR
- echo $NRUNS_LTE_SOFTMODEM
- echo $TIMEOUT_CMD
- mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR
......
This diff is collapsed.
......@@ -137,7 +137,13 @@ Obj.# Case# Test# Description
01 59 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 61 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
01 60 lte-softmodem tests with USRP X310 RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
01 60 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 60 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 60 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 60 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 60 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 60 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 61 lte-softmodem tests with EXMIMO RF as eNB and ALU EPC w/ Bandrich COTS UE for `TX/1RX, 2TX/2RX
01 61 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -148,7 +154,22 @@ Obj.# Case# Test# Description
01 61 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 62 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on same machines) w/ Bandrich COTS UE
01 63 lte-softmodem tests with EXMIMO RF as eNB and OAI EPC (eNB and EPC are on different machines) w/ Bandrich COTS UE
01 63 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 63 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 63 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 63 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 63 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 63 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 65 00 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 65 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 65 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 65 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 65 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 65 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 65 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests
......
......@@ -175,6 +175,7 @@ function test_compile() {
#\param $13 -> output of compilation program that needs to be found for test case to pass
#\param $14 -> tags to help identify the test case for readability in output xml file
#\param $15 => password for the user to run certain commands as sudo
#\param $16 => test config file params to be modified
function test_compile_and_run() {
xUnit_start
......@@ -195,12 +196,14 @@ function test_compile_and_run() {
compile_prog_out=${13}
tags=${14}
mypassword=${15}
test_config_file=${16}
build_dir=$tdir/$1/build
#exec_file=$build_dir/$6
xmlfile_testcase=$log_dir/test.$1.xml
#Temporary log file where execution log is stored.
temp_exec_log=$log_dir/temp_log.txt
export OPENAIR_LOGDIR=$log_dir
rm -fr $log_dir
mkdir -p $log_dir
......@@ -219,6 +222,10 @@ function test_compile_and_run() {
#compile_prog_array=()
#read -a compile_prog_array <<<"$compile_prog"
#test_config_file=`eval "echo \"$test_config_file\" "`
#echo "test_config_file = $test_config_file"
tags_array=()
read -a tags_array <<<"$tags"
......@@ -238,17 +245,21 @@ function test_compile_and_run() {
cd $log_dir
{
uname -a
#eval $pre_compile_prog
#cmake ..
#rm -fv $exec_file
echo "Executing $compile_prog $compile_args" >> $log_file
echo "Executing $pre_compile_prog"
eval $pre_compile_prog
if [ "$test_config_file" != "" ]; then
echo "Modifying test_config_file parameters..."
echo "$test_config_file" |xargs -L 1 $OPENAIR_DIR/cmake_targets/autotests/tools/search_repl.py
fi
echo "Executing $compile_prog $compile_args"
eval "$compile_prog $compile_args"
echo "Copying compilation log files to test case log directory: $log_dir"
cp -fvr $OPENAIR_DIR/cmake_targets/log/ $log_dir/compile_log
}>> $log_file 2>&1
echo "</COMPILATION LOG>" >> $log_file 2>&1
#done
#process the test case if it is that of execution
if [ "$class" == "execution" ]; then
tags_array_index=0
......@@ -437,7 +448,8 @@ for search_expr in "${test_case_array[@]}"
else
flag_run_test_case=1
fi
#We skip this test case if it is not in the group list
if [ "$flag_run_test_case" -ne "1" ]; then
continue
......@@ -458,6 +470,7 @@ for search_expr in "${test_case_array[@]}"
nruns=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/nruns" $xml_conf`
compile_prog_out=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/compile_prog_out" $xml_conf`
tags=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/tags" $xml_conf`
test_config_file=`xmlstarlet sel -t -v "/testCaseList/testCase[@id='$search_expr']/test_config_file" $xml_conf`
echo "class = $class"
echo "name = $name"
......@@ -497,7 +510,7 @@ for search_expr in "${test_case_array[@]}"
test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
elif [ "$class" == "execution" ]; then
$SUDO killall -q oaisim_nos1
test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword"
test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file"
else
echo "Unexpected class of test case...Skipping the test case $name ...."
fi
......
......@@ -60,7 +60,9 @@ import paramiko
import subprocess
import commands
sys.path.append('/opt/ssh')
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
import ssh
from ssh import SSHSession
import argparse
......@@ -1015,6 +1017,8 @@ class oaiCleanOldProgramThread (threading.Thread):
error = error + '\n threadID = ' + str(self.threadID) + '\n threadname = ' + self.threadname + '\n CleanUpOldProgs = ' + self.CleanUpOldProgs + '\n CleanUpAluLteBox = ' + self.CleanUpAluLteBox + '\n ExmimoRfStop = ' + self.ExmimoRfStop + '\n'
error = error + traceback.format_exc()
print error
print "There is error in cleaning up old programs. The test case execution cannot continue...."
sys.exit(1)
# \brief Run parallel threads in all machines for clean up old execution of test cases
# \param oai_list list of handlers that can be used to execute programs on remote machines
......@@ -1282,18 +1286,17 @@ if localshell == 0:
print '\nCleaning Older running programs : ' + CleanUpOldProgs
cleanOldPrograms(oai_list[index], CleanUpOldProgs, CleanUpAluLteBox, ExmimoRfStop)
result = oai_list[index].send('mount ' + NFSResultsDir, True)
print "Mounting NFS Share " + NFSResultsDir + "..." + result
#result = oai_list[index].send('mount ' + NFSResultsDir, True)
#print "Mounting NFS Share " + NFSResultsDir + "..." + result
# Check if NFS share is mounted correctly.
print 'Checking if NFS Share<' + NFSResultsDir + '> is mounted correctly...'
#result = oai_list[index].send_expect('mount | grep ' + NFSResultsDir, NFSResultsDir )
cmd = 'if grep -qs '+NFSResultsDir+ ' /proc/mounts; then echo \'' + NFSResultsDir + ' is mounted\' ; fi'
search_expr = NFSResultsDir + ' is mounted'
print "cmd = " + cmd
print "search_expr = " + search_expr
result = oai_list[index].send_expect(cmd, search_expr)
print "Mount NFS_Results_Dir..." + result
#print 'Checking if NFS Share<' + NFSResultsDir + '> is mounted correctly...'
#cmd = 'if grep -qs '+NFSResultsDir+ ' /proc/mounts; then echo \'' + NFSResultsDir + ' is mounted\' ; fi'
#search_expr = NFSResultsDir + ' is mounted'
#print "cmd = " + cmd
#print "search_expr = " + search_expr
#result = oai_list[index].send_expect(cmd, search_expr)
#print "Mount NFS_Results_Dir..." + result
index = index + 1
#oai.connect2(user,pw)
......
This source diff could not be displayed because it is too large. You can view the blob instead.
......@@ -21,6 +21,10 @@ if openair_dir == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
......@@ -159,34 +163,11 @@ def reset_ue():
VendorId=res[0][2]
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print usb_dir
print "Bandrich 4G LTE Adapter found in..." + usb_dir
cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 5" )
os.system(cmd + " ; sleep 15" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 5" )
def read_file(filename):
try:
file = open(filename, 'r')
return file.read()
except Exception, e:
#error = ' Filename ' + filename
#error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
#error = error + traceback.format_exc()
#print error
return ''
def find_usb_path(idVendor, idProduct):
for root, dirs, files in os.walk("/sys/bus/usb/devices", topdown=False):
for name in dirs:
tmpdir= os.path.join(root, name)
tmpidVendor = read_file(tmpdir+'/idVendor').replace("\n","")
tmpidProduct = read_file(tmpdir+'/idProduct').replace("\n","")
#print "tmpdir = " + tmpdir + " tmpidVendor = " + tmpidVendor + " tmpidProduct = " + tmpidProduct
if tmpidVendor == idVendor and tmpidProduct == idProduct:
return tmpdir
return ''
os.system(cmd + " ; sleep 30" )
i=1
gw='192.172.0.1'
......
#!/usr/bin/python
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import commands
def read_file(filename):
try:
file = open(filename, 'r')
return file.read()
except Exception, e:
# WE just ignore the exception as some files are probably not present
#error = ' Filename ' + filename
#error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
#error = error + traceback.format_exc()
#print error
return ''
def find_usb_path(idVendor, idProduct):
for root, dirs, files in os.walk("/sys/bus/usb/devices", topdown=False):
for name in dirs:
tmpdir= os.path.join(root, name)
tmpidVendor = read_file(tmpdir+'/idVendor').replace("\n","")
tmpidProduct = read_file(tmpdir+'/idProduct').replace("\n","")
if tmpidVendor == idVendor and tmpidProduct == idProduct:
return tmpdir
return ''
#!/usr/bin/python
import sys
import re
import os
#Arg 1 name of file
#Arg 2 keyword
#arg 3 replacement text
#Note that these should be seperated by spaces
if len(sys.argv) != 4:
print "search_repl.py: Wrong number of arguments. This program needs 3 arguments"
print "search_repl.py: Wrong number of arguments. This program needs 3 arguments. The number of arguments supplied : " + str(sys.argv)
sys.exit()
filename = sys.argv[1]
filename = os.path.expandvars(sys.argv[1])
keyword = sys.argv[2]
replacement_text = sys.argv[3]
file = open(filename, 'r')
string = file.read()
file.close()
......
This diff is collapsed.
......@@ -180,7 +180,7 @@ check_install_bladerf_driver(){
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
check_install_additional_tools (){
......
#!/usr/bin/python
import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import commands
if os.environ.get('OPENAIR_DIR') == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
def reset_bladerf():
stringIdBladeRF='OpenMoko, Inc'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBladeRF + '\'')
if (out == '') :
print "BladeRF not found. Exiting now..."
sys.exit()
p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
res=p.findall(out)
BusId=res[0][0]
DeviceId=res[0][1]
VendorId=res[0][2]
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print "BladeRF Found in directory..." + usb_dir
cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 5" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 5" )
os.system ('sudo -E bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img')
print "Resettting BladeRF..."
reset_bladerf()
os.system ("dmesg|tail")
......@@ -1077,7 +1077,7 @@ int32_t rx_pucch_emul(PHY_VARS_eNB *phy_vars_eNB,
}
if (UE_id==NB_UE_INST) {
LOG_E(PHY,"rx_pucch_emul: FATAL, didn't find UE with rnti %x\n",rnti);
LOG_W(PHY,"rx_pucch_emul: Didn't find UE with rnti %x\n",rnti);
return(-1);
}
......
......@@ -76,6 +76,13 @@
#define openair_free(y,x) free((y))
#define PAGE_SIZE 4096
//#ifdef SHRLIBDEV
//extern int rxrescale;
//#define RX_IQRESCALELEN rxrescale
//#else
//#define RX_IQRESCALELEN 15
//#endif
//! \brief Allocate \c size bytes of memory on the heap with alignment 16 and zero it afterwards.
//! If no more memory is available, this function will terminate the program with an assertion error.
static inline void* malloc16_clear( size_t size )
......
......@@ -44,7 +44,14 @@
/** @defgroup _ref_implementation_ OpenAirInterface LTE Implementation
* @{
* @defgroup _PHY_RF_INTERFACE_ Generic PHY - RF Interface
* @defgroup _PHY_RF_INTERFACE_ PHY - RF Interface
* @ingroup _PHY_RF_INTERFACE_
* @{
* @defgroup _GENERIC_PHY_RF_INTERFACE_ Generic PHY - RF Interface
* @defgroup _USRP_PHY_RF_INTERFACE_ PHY - USRP RF Interface
* @defgroup _BLADERF_PHY_RF_INTERFACE_ PHY - BLADERF RF Interface
* @}
*
* @ingroup _ref_implementation_
* @{
* This module is responsible for defining the generic interface between PHY and RF Target
......
......@@ -170,6 +170,14 @@
#define ENB_CONFIG_STRING_ENB_IPV4_ADDR_FOR_S1U "ENB_IPV4_ADDRESS_FOR_S1U"
#define ENB_CONFIG_STRING_ENB_PORT_FOR_S1U "ENB_PORT_FOR_S1U"
#define ENB_CONFIG_STRING_RRH_GW_CONFIG "rrh_gw_config"
#define ENB_CONFIG_STRING_RRH_GW_LOCAL_IF_NAME "local_if_name"
#define ENB_CONFIG_STRING_RRH_GW_LOCAL_ADDRESS "local_address"
#define ENB_CONFIG_STRING_RRH_GW_REMOTE_ADDRESS "remote_address"
#define ENB_CONFIG_STRING_RRH_GW_LOCAL_PORT "local_port"
#define ENB_CONFIG_STRING_RRH_GW_REMOTE_PORT "remote_port"
#define ENB_CONFIG_STRING_RRH_GW_ACTIVE "active"
#define ENB_CONFIG_STRING_RRH_GW_PREFERENCE "preference"
#define ENB_CONFIG_STRING_ASN1_VERBOSITY "Asn1_verbosity"
#define ENB_CONFIG_STRING_ASN1_VERBOSITY_NONE "none"
......@@ -274,6 +282,18 @@ static void enb_config_display(void)
} else {
printf( "\tMNC: \t%02"PRIu16":\n",enb_properties.properties[i]->mnc);
}
for (j=0; j< enb_properties.properties[i]->nb_rrh_gw; j++) {
if (enb_properties.properties[i]->rrh_gw_config[j].active == 1 ){
printf( "\n\tRRH GW %d config for eNB %u:\n\n", j, i);
printf( "\tinterface name : \t%s:\n",enb_properties.properties[i]->rrh_gw_if_name);
printf( "\tlocal address : \t%s:\n",enb_properties.properties[i]->rrh_gw_config[j].local_address);
printf( "\tlocal port : \t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].local_port);
printf( "\tremote address : \t%s:\n",enb_properties.properties[i]->rrh_gw_config[j].remote_address);
printf( "\tremote port : \t%d:\n",enb_properties.properties[i]->rrh_gw_config[j].remote_port);
printf( "\ttransport : \t%s Ethernet:\n\n",(enb_properties.properties[i]->rrh_gw_config[j].raw == 1)? "RAW" : "UDP");
}
}
for (j=0; j< enb_properties.properties[i]->nb_cc; j++) {
printf( "\teutra band for CC %d: \t%"PRId16":\n",j,enb_properties.properties[i]->eutra_band[j]);
......@@ -455,6 +475,8 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
config_setting_t *setting_srb1 = NULL;
config_setting_t *setting_mme_addresses = NULL;
config_setting_t *setting_mme_address = NULL;
config_setting_t *setting_rrh_gws = NULL;
config_setting_t *setting_rrh_gw = NULL;
config_setting_t *setting_enb = NULL;
config_setting_t *setting_otg = NULL;
config_setting_t *subsetting_otg = NULL;
......@@ -462,6 +484,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
int enb_properties_index = 0;
int num_enbs = 0;
int num_mme_address = 0;
int num_rrh_gw = 0;
int num_otg_elements =0;
int num_component_carriers =0;
int i = 0;
......@@ -558,10 +581,15 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
libconfig_int my_int;
char* if_name = NULL;
char* ipv4 = NULL;
char* ipv4_remote = NULL;
char* ipv6 = NULL;
char* active = NULL;
char* preference = NULL;
libconfig_int local_port = 0;
libconfig_int remote_port = 0;
const char* active_enb[MAX_ENB];
char* enb_interface_name_for_S1U = NULL;
char* enb_ipv4_address_for_S1U = NULL;
......@@ -2136,6 +2164,63 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
enb_properties.properties[enb_properties_index]->mme_ip_address[j].ipv6 = 1;
}
}
// RRH Config
setting_rrh_gws = config_setting_get_member (setting_enb, ENB_CONFIG_STRING_RRH_GW_CONFIG);
if ( setting_rrh_gws != NULL) {
num_rrh_gw = config_setting_length(setting_rrh_gws);
enb_properties.properties[enb_properties_index]->nb_rrh_gw = 0;
for (j = 0; j < num_rrh_gw; j++) {
setting_rrh_gw = config_setting_get_elem(setting_rrh_gws, j);
if ( !(
config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_LOCAL_IF_NAME, (const char **)&if_name)
&& config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_LOCAL_ADDRESS, (const char **)&ipv4)
&& config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_REMOTE_ADDRESS , (const char **)&ipv4_remote)
&& config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_LOCAL_PORT, &local_port)
&& config_setting_lookup_int(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_REMOTE_PORT, &remote_port)
&& config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_ACTIVE, (const char **)&active)
&& config_setting_lookup_string(setting_rrh_gw, ENB_CONFIG_STRING_RRH_GW_PREFERENCE, (const char **)&preference)
)
) {
AssertError (0, parse_errors ++,
"Failed to parse eNB configuration file %s, %u th enb %u the RRH GW address !\n",
lib_config_file_name_pP, i, j);
continue; // FIXME will prevent segfaults below, not sure what happens at function exit...
}
enb_properties.properties[enb_properties_index]->nb_rrh_gw += 1;
enb_properties.properties[enb_properties_index]->rrh_gw_if_name = strdup(if_name);
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_address = strdup(ipv4);
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_address = strdup(ipv4_remote);
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_port= local_port;
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_port= remote_port;
if (strcmp(active, "yes") == 0) {
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].active = 1;
}
if (strcmp(preference, "udp") == 0) {
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].udp = 1;
} else if (strcmp(preference, "raw") == 0) {
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].raw = 1;
} else {//if (strcmp(preference, "no") == 0)
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].udp = 1;
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].raw = 1;
}
}
} else {
enb_properties.properties[enb_properties_index]->nb_rrh_gw = 0;
enb_properties.properties[enb_properties_index]->rrh_gw_if_name = "none";
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_address = "0.0.0.0";
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_address = "0.0.0.0";
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].local_port= 0;
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].remote_port= 0;
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].active = 0;
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].udp = 0;
enb_properties.properties[enb_properties_index]->rrh_gw_config[j].raw = 0;
}
// SCTP SETTING
enb_properties.properties[enb_properties_index]->sctp_out_streams = SCTP_OUT_STREAMS;
......
......@@ -78,6 +78,17 @@ typedef struct mme_ip_address_s {
char *ipv6_address;
} mme_ip_address_t;
typedef struct rrh_gw_config_s {
unsigned udp:1;
unsigned raw:1;
unsigned active:1;
char *local_address;
char *remote_address;
uint16_t local_port;
uint16_t remote_port;
} rrh_gw_config_t;
typedef struct Enb_properties_s {
/* Unique eNB_id to identify the eNB within EPC.
* For macro eNB ids this field should be 20 bits long.
......@@ -203,6 +214,13 @@ typedef struct Enb_properties_s {
char *enb_interface_name_for_S1_MME;
in_addr_t enb_ipv4_address_for_S1_MME;
/* Nb of RRH to connect to */
uint8_t nb_rrh_gw;
char *rrh_gw_if_name;
/* List of MME to connect to */
rrh_gw_config_t rrh_gw_config[4];
// otg config
/* Nb of OTG elements */
uint8_t num_otg_elements;
......
......@@ -1101,8 +1101,9 @@ boolean_t CCE_allocation_infeasible(int module_idP,
DCI_pdu->Num_ue_spec_dci++;
ret = allocate_CCEs(module_idP,CC_idP,subframe,1);
if (ret==-1)
res = FALSE;
res = TRUE;
DCI_pdu->Num_ue_spec_dci--;
}
return(res);
}
......@@ -106,6 +106,9 @@ const char* eurecomVariablesNames[] = {
"lhw_cnt_tx",
"pck_rx",
"pck_tx",
"rx_seq_num",
"rx_seq_num_prv",
"tx_seq_num",
"cnt",
"dummy_dump",
"itti_send_msg",
......
......@@ -78,6 +78,9 @@ typedef enum {
VCD_SIGNAL_DUMPER_VARIABLES_TX_LHWCNT,
VCD_SIGNAL_DUMPER_VARIABLES_RX_PCK,
VCD_SIGNAL_DUMPER_VARIABLES_TX_PCK,
VCD_SIGNAL_DUMPER_VARIABLES_RX_SEQ_NUM,
VCD_SIGNAL_DUMPER_VARIABLES_RX_SEQ_NUM_PRV,
VCD_SIGNAL_DUMPER_VARIABLES_TX_SEQ_NUM,
VCD_SIGNAL_DUMPER_VARIABLES_CNT,
VCD_SIGNAL_DUMPER_VARIABLES_DUMMY_DUMP,
VCD_SIGNAL_DUMPER_VARIABLE_ITTI_SEND_MSG,
......
......@@ -38,6 +38,11 @@
#include <inttypes.h>
#include "bladerf_lib.h"
/** @addtogroup _BLADERF_PHY_RF_INTERFACE_
* @{
*/
//! Number of BladeRF devices
#ifdef __SSE4_1__
# include <smmintrin.h>
#endif
......@@ -47,13 +52,21 @@
#endif
int num_devices=0;
/*These items configure the underlying asynch stream used by the the sync interface.
*/
int trx_brf_init(openair0_device *openair0) {
/*! \brief BladeRF Init function (not used at the moment)
* \param device RF frontend parameters set by application
*/
int trx_brf_init(openair0_device *device) {
}
/*! \brief get current timestamp
*\param device the hardware to use
*\param module the bladeRf module
*/
openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module module) {
int status;
......@@ -69,17 +82,29 @@ openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module mod
return meta.timestamp;
}
int trx_brf_start(openair0_device *openair0) {
/*! \brief Start BladeRF
*\param device the hardware to use
*/
int trx_brf_start(openair0_device *device) {
return 0;
}
/*! \brief Get BladeRF stats
*\param device the hardware to use
*/
static void trx_brf_stats(openair0_device *device){
}
/*! \brief Called to send samples to the BladeRF RF target
@param device pointer to the device structure specific to the RF hardware target
@param timestamp The timestamp at whicch the first sample MUST be sent
@param buff Buffer which holds the samples
@param nsamps number of samples to be sent
@param cc index of the component carrier
*/
static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc) {
int status;
......@@ -121,6 +146,16 @@ static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp,
return(0);
}
/*! \brief Receive samples from hardware.
* Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
* the first channel. *ptimestamp is the time at which the first sample
* was received.
* \param device the hardware to use
* \param[out] ptimestamp the time at which the first sample was received.
* \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
* \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
* \param cc Index of component carrier
*/
static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
int status=0;
......@@ -157,6 +192,9 @@ static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp,
}
/*! \brief Terminate operation of the BladeRF transceiver -- free all associated resources
* \param device the hardware to use
*/
int trx_brf_end(openair0_device *device) {
int status;
......@@ -172,25 +210,39 @@ int trx_brf_end(openair0_device *device) {
return 0;
}
/*! \brief print the BladeRF statistics
* \param device the hardware to use
* \returns 0 on success
*/
int trx_brf_get_stats(openair0_device* device) {
return(0);
}
/*! \brief Reset the BladeRF statistics
* \param device the hardware to use
* \returns 0 on success
*/
int trx_brf_reset_stats(openair0_device* device) {
return(0);