Commit dbae061e authored by knopp's avatar knopp

modifications for if5

parent 5309b71e
......@@ -23,7 +23,7 @@ eNBs =
component_carriers = (
{
node_function = "NGFI_RCC_IF4";
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
......
......@@ -23,7 +23,7 @@ eNBs =
component_carriers = (
{
node_function = "NGFI_RRU_IF4";
node_function = "NGFI_RRU_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
......
......@@ -159,7 +159,7 @@ static struct {
void exit_fun(const char* s);
void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst);
void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst,eth_params_t *);
void stop_eNB(int nb_inst);
......@@ -1218,16 +1218,17 @@ static void* eNB_thread_FH( void* param ) {
wait_system_ready ("Waiting for eNB application to be ready %s\r", &start_eNB);
#endif
// Start RF device if any
if (eNB->start_rf)
if (eNB->start_rf(eNB) != 0)
LOG_E(HW,"Could not start the RF device\n");
// Start IF device if any
if (eNB->start_if)
if (eNB->start_if(eNB) != 0)
LOG_E(HW,"Could not start the IF device\n");
// Start RF device if any
if (eNB->start_rf)
if (eNB->start_rf(eNB) != 0)
LOG_E(HW,"Could not start the RF device\n");
// This is a forever while loop, it loops over subframes which are scheduled by incoming samples from HW devices
while (!oai_exit) {
......@@ -1743,11 +1744,13 @@ extern void eNB_fep_rru_if5(PHY_VARS_eNB *eNB,eNB_proc_t *proc);
extern void eNB_fep_full(PHY_VARS_eNB *eNB,eNB_proc_t *proc);
extern void do_prach(PHY_VARS_eNB *eNB,eNB_proc_t *proc);
void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst) {
void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst,eth_params_t *eth_params) {
int CC_id;
int inst;
PHY_VARS_eNB *eNB;
int ret;
for (inst=0;inst<nb_inst;inst++) {
for (CC_id=0;CC_id<MAX_NUM_CCs;CC_id++) {
eNB = PHY_vars_eNB_g[inst][CC_id];
......@@ -1755,37 +1758,73 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
eNB->node_timing = node_timing[CC_id];
eNB->abstraction_flag = 0;
LOG_I(PHY,"Initializing eNB %d CC_id %d : (%s,%s)\n",inst,CC_id,eNB_functions[node_function[CC_id]],eNB_timing[node_timing[CC_id]]);
switch (node_function[CC_id]) {
case NGFI_RRU_IF5:
eNB->do_prach = NULL;
eNB->fep = eNB_fep_rru_if5;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = NULL;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
eNB->do_prach = NULL;
eNB->fep = eNB_fep_rru_if5;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = proc_tx_rru_if5;;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[0]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
eNB->rfdevice.host_type = RRH_HOST;
eNB->ifdevice.host_type = RRH_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[0], (eth_params+CC_id));
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
break;
case NGFI_RRU_IF4p5:
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = proc_tx_rru_if4p5;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;
eNB->proc_uespec_rx = NULL;
eNB->proc_tx = proc_tx_rru_if4p5;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = start_if;
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[0]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
eNB->rfdevice.host_type = RRH_HOST;
eNB->ifdevice.host_type = RRH_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[0], (eth_params+CC_id));
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF4p5_buffer(eNB);
break;
case eNodeB_3GPP:
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_full;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = NULL;
eNB->do_prach = do_prach;
eNB->fep = eNB_fep_full;
eNB->proc_uespec_rx = phy_procedures_eNB_uespec_RX;
eNB->proc_tx = proc_tx_full;
eNB->tx_fh = NULL;
eNB->rx_fh = rx_rf;
eNB->start_rf = start_rf;
eNB->start_if = NULL;
ret = openair0_device_load(&eNB->rfdevice, &openair0_cfg[0]);
if (ret<0) {
printf("Exiting, cannot initialize rf device\n");
exit(-1);
}
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
break;
case eNodeB_3GPP_BBU:
eNB->do_prach = do_prach;
......@@ -1796,6 +1835,15 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
eNB->rx_fh = rx_fh_if5;
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[0], (eth_params+CC_id));
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
break;
case NGFI_RCC_IF4p5:
eNB->do_prach = do_prach;
......@@ -1806,7 +1854,16 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
eNB->rx_fh = rx_fh_if4p5;
eNB->start_rf = NULL;
eNB->start_if = start_if;
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[0], (eth_params+CC_id));
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
malloc_IF4p5_buffer(eNB);
break;
case NGFI_RAU_IF4p5:
eNB->do_prach = do_prach;
......@@ -1817,8 +1874,18 @@ void init_eNB(eNB_func_t node_function[], eNB_timing_t node_timing[],int nb_inst
eNB->rx_fh = rx_fh_if4p5;
eNB->start_rf = NULL;
eNB->start_if = start_if;
malloc_IF4p5_buffer(eNB);
eNB->rfdevice.host_type = BBU_HOST;
eNB->ifdevice.host_type = BBU_HOST;
ret = openair0_transport_load(&eNB->ifdevice, &openair0_cfg[0], (eth_params+CC_id));
printf("openair0_transport_init returns %d for CC_id %d\n",ret,CC_id);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
break;
malloc_IF4p5_buffer(eNB);
}
}
......
......@@ -119,7 +119,7 @@ unsigned short config_frames[4] = {2,9,11,13};
// In lte-enb.c
extern int setup_eNB_buffers(PHY_VARS_eNB **phy_vars_eNB, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs]);
extern void init_eNB(eNB_func_t *, eNB_timing_t *,int);
extern void init_eNB(eNB_func_t *, eNB_timing_t *,int,eth_params_t *);
extern void stop_eNB(int);
extern void kill_eNB_proc(void);
......@@ -1643,64 +1643,6 @@ int main( int argc, char **argv )
openair0_cfg[0].log_level = glog_level;
if (UE_flag == 0) {
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (node_function[CC_id] == NGFI_RRU_IF4p5 || node_function[CC_id] == NGFI_RRU_IF5) {
PHY_vars_eNB_g[0][CC_id]->rfdevice.host_type = RRH_HOST;
PHY_vars_eNB_g[0][CC_id]->ifdevice.host_type = RRH_HOST;
} else {
PHY_vars_eNB_g[0][CC_id]->rfdevice.host_type = BBU_HOST;
PHY_vars_eNB_g[0][CC_id]->ifdevice.host_type = BBU_HOST;
}
}
}
else {
/* device host type is set*/
PHY_vars_UE_g[0][0]->rfdevice.host_type = BBU_HOST;
/* device type is initialized NONE_DEV (no RF device) when the RF device will be initiated device type will be set */
PHY_vars_UE_g[0][0]->rfdevice.type = NONE_DEV;
/* transport type is initialized NONE_TP (no transport protocol) when the transport protocol will be initiated transport protocol type will be set */
PHY_vars_UE_g[0][0]->rfdevice.transp_type = NONE_TP;
}
int returns=-1;
// Load RF device and initialize
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if (node_function[CC_id] == NGFI_RRU_IF5 || node_function[CC_id] == NGFI_RRU_IF4p5 || node_function[CC_id] == eNodeB_3GPP) {
if (mode!=loop_through_memory) {
returns= (UE_flag == 0) ?
openair0_device_load(&(PHY_vars_eNB_g[0][CC_id]->rfdevice), &openair0_cfg[0]) :
openair0_device_load(&(PHY_vars_UE_g[0][CC_id]->rfdevice), &openair0_cfg[0]);
printf("openair0_device_init returns %d for CC_id %d\n",returns,CC_id);
if (returns<0) {
printf("Exiting, cannot initialize device\n");
exit(-1);
}
} else if (mode==loop_through_memory) {
}
}
}
// Load transport protocol and initialize
for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
if ((UE_flag==0) && (node_function[CC_id] != eNodeB_3GPP)) {
if (mode!=loop_through_memory) {
returns = openair0_transport_load(&(PHY_vars_eNB_g[0][CC_id]->ifdevice), &openair0_cfg[0], (eth_params+CC_id));
printf("openair0_transport_init returns %d for CC_id %d\n",returns,CC_id);
if (returns<0) {
printf("Exiting, cannot initialize transport protocol\n");
exit(-1);
}
} else if (mode==loop_through_memory) {
}
}
}
printf("Done initializing RF and IF devices\n");
mac_xface = malloc(sizeof(MAC_xface));
......@@ -1854,7 +1796,7 @@ int main( int argc, char **argv )
// start the main thread
if (UE_flag == 1) init_UE(1);
else init_eNB(node_function,node_timing,1);
else init_eNB(node_function,node_timing,1,eth_params);
// Sleep to allow all threads to setup
sleep(3);
......
......@@ -179,12 +179,17 @@ void init_UE(int nb_inst) {
int error_code;
int inst;
PHY_VARS_UE *UE;
int ret;
for (inst=0;inst<nb_inst;inst++) {
printf("Intializing UE Threads for instance %d ...\n",inst);
init_UE_threads(inst);
sleep(1);
UE = PHY_vars_UE_g[inst][0];
ret = openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]);
UE->rfdevice.host_type = BBU_HOST;
UE->rfdevice.type = NONE_DEV;
error_code = pthread_create(&UE->proc.pthread_ue, &UE->proc.attr_ue, UE_thread, NULL);
if (error_code!= 0) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment