[GITLAB] - UPGRADE TO v12 on Wednesday the 18th of December at 11.30AM

Commit e3b7af09 authored by gauthier's avatar gauthier

Single config file for EPC containing all parameters for all entities/layers with no redundancy.

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@4988 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent aeeadaaa
Active_eNBs = ( "eNB_Eurecom_0");
eNBs =
(
{
eNB_ID = 347472;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_0";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
mobile_country_code = 208;
mobile_network_code = 10;
// Default Paging DRX of the eNB as defined in TS 36.304
default_paging_drx = "PAGING_DRX_256";
mme_ip_address = ( { ipv4 = "192.168.30.17";
ipv6 = "2192:168:30::17";
active = "yes";
preference = "ipv4";
},
{ ipv4 = "192.168.30.18";
ipv6 = "2192:168:30::18";
active = "no";
preference = "ipv4";
}
);
}
);
MME :
{
REALM = "eur";
# Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place.
MAXENB = 10;
MAXUE = 100;
RELATIVE_CAPACITY = 10;
# Display statistics about whole system (expressed in seconds)
MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no";
INTERTASK_INTERFACE :
{
# max queue size per task
ITTI_QUEUE_SIZE = 2000000;
};
S6A :
{
S6A_CONF = "../objs/UTILS/CONF/s6a.conf";
};
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 32;
SCTP_OUTSTREAMS = 32;
}
# ------- S1AP definitions
S1AP :
{
# outcome drop timer value (seconds)
S1AP_OUTCOME_TIMER = 10;
}
# ------- MME served GUMMEI
GUMMEI :
{
# MME code DEFAULT = 0
# size = 8 bits
# maximum of 256 values, comma separated
MME_CODE = [ 30 , 56 , 1 , 8 ];
# MME GROUP ID DEFAULT = 0
# size = 16 bits
# maximum of 65535 values, comma separated
MME_GID = [ 3 , 4 , 5 , 30 , 8 , 9 , 50021 ];
# TA (mcc.mnc:tracking area code) DEFAULT = 208.34:0
# max values = 999.999:65535
# maximum of 32 values, comma separated
PLMN = (
{MCC=208 , MNC=38, TAC = 0 },
{MCC=209 , MNC=130, TAC = 4 },
{MCC=208 , MNC=35, TAC = 8 }
)
}
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_S1_MME = "cpmme0";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.30.17/24";
MME_INTERFACE_NAME_FOR_S11_MME = "s11mme";
MME_IPV4_ADDRESS_FOR_S11_MME = "192.168.33.117/24";
}
};
S-GW :
{
NETWORK_INTERFACES :
{
SGW_INTERFACE_NAME_FOR_S11 = "s11sgw";
SGW_IPV4_ADDRESS_FOR_S11 = "192.168.33.17/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "upsgw0";
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.31.17/24";
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "upsgw1";
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "192.168.5.2/24";
};
};
P-GW =
{
NETWORK_INTERFACES :
{
PGW_INTERFACE_NAME_FOR_S5_S8 = "uppgw0";
PGW_IPV4_ADDRESS_FOR_S5_S8 = "192.168.5.1/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth2";
PGW_IPV4_ADDR_FOR_SGI = "192.168.13.17/24";
};
IP_ADDRESS_POOL :
{
IPV4_LIST = (
"192.168.87.32",
"192.168.88.1 ... 192.168.88.123",
"192.168.90.1 ... 192.168.90.117"
);
IPV6_LIST = (
"2014:01:26::32",
"12014:01:26::1 ... 2014:01:26::2",
"12014:01:26::1 ... 2014:01:26::2"
);
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment