Commit ec7d0ff2 authored by Rohit Gupta's avatar Rohit Gupta

fix compilation warnings

parent 5ed184dd
......@@ -434,7 +434,7 @@ schedule_ue_spec(
int N_RBG[MAX_NUM_CCs];
unsigned char aggregation;
mac_rlc_status_resp_t rlc_status;
unsigned char header_len_dcch=0, header_len_dcch_tmp=0, header_len_dcch_last=0;
unsigned char header_len_dcch=0, header_len_dcch_tmp=0;
unsigned char header_len_dtch=0, header_len_dtch_tmp=0, header_len_dtch_last=0;
unsigned char ta_len=0;
unsigned char sdu_lcids[NB_RB_MAX],lcid,offset,num_sdus=0;
......
......@@ -1259,7 +1259,6 @@ int rrc_eNB_process_S1AP_E_RAB_SETUP_REQ(MessageDef *msg_p, const char *msg_name
{
uint16_t ue_initial_id;
uint32_t eNB_ue_s1ap_id;
MessageDef *message_gtpv1u_p = NULL;
gtpv1u_enb_create_tunnel_req_t create_tunnel_req;
gtpv1u_enb_create_tunnel_resp_t create_tunnel_resp;
......
......@@ -79,6 +79,14 @@ rrc_eNB_S1AP_remove_ue_ids(
eNB_RRC_INST* const rrc_instance_pP,
struct rrc_ue_s1ap_ids_s* const ue_ids_pP
);
void
rrc_eNB_generate_dedicatedRRCConnectionReconfiguration(const protocol_ctxt_t* const ctxt_pP,
rrc_eNB_ue_context_t* const ue_context_pP,
const uint8_t ho_state
);
/*! \fn void rrc_eNB_send_S1AP_INITIAL_CONTEXT_SETUP_RESP(uint8_t mod_id, uint8_t ue_index)
*\brief create a S1AP_INITIAL_CONTEXT_SETUP_RESP for S1AP.
*\param ctxt_pP Running context.
......
......@@ -185,12 +185,11 @@ int main (int argc, const char* argv[])
usim_data.imsi.u.num.digit15 = 0b1111;
#endif
#if (SELECTED_PLMN == OAI_LTEBOX)
#warning "IMSI 208.93.00001111"
/*
* International Mobile Subscriber Identity
* IMSI = MCC + MNC + MSIN = 208 (France) + 10 (SFR) + 00001234
*/
#warning "IMSI 208.93.0100001110"
#warning "IMSI 208.93.0100001111"
usim_data.imsi.length = 8;
usim_data.imsi.u.num.parity = ODD_PARITY; // Parity: even
usim_data.imsi.u.num.digit1 = 2; // MCC digit 1
......
......@@ -49,7 +49,7 @@ Description Implements the API used by the NAS layer to read/write
#include "usim_api.h"
#include "nas_log.h"
#include "memory.h"
#include <stdio.h>
#include "aka_functions.h"
#include <string.h> // memcpy, memset
#include <stdlib.h> // malloc, free
......
......@@ -233,7 +233,7 @@ int trx_brf_reset_stats(openair0_device* device) {
* \param card the hardware to use
* \returns 0 in success
*/
int trx_brf_stop(int card) {
int trx_brf_stop(openair0_device* device) {
return(0);
......
......@@ -108,6 +108,7 @@ unsigned short config_frames[4] = {2,9,11,13};
# include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
# include "SIMULATION/ETH_TRANSPORT/proto.h"
extern int netlink_init(void);
#endif
# endif
#endif
......@@ -1364,7 +1365,7 @@ void init_openair0() {
int main( int argc, char **argv )
{
int i,aa,card=0;
int i,aa;
#if defined (XFORMS)
void *status;
#endif
......
......@@ -187,6 +187,9 @@ void init_UE(int nb_inst) {
UE = PHY_vars_UE_g[inst][0];
ret = openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]);
if (ret !=0){
exit_fun("Error loading device library");
}
UE->rfdevice.host_type = BBU_HOST;
// UE->rfdevice.type = NONE_DEV;
error_code = pthread_create(&UE->proc.pthread_ue, &UE->proc.attr_ue, UE_thread, NULL);
......@@ -1062,6 +1065,10 @@ void *UE_thread(void *arg) {
UE->frame_parms.samples_per_tti,
UE->frame_parms.nb_antennas_tx,
1);
if (txs != UE->frame_parms.samples_per_tti) {
LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, UE->frame_parms.samples_per_tti);
exit_fun( "problem transmitting samples" );
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
......@@ -1088,7 +1095,10 @@ void *UE_thread(void *arg) {
UE->frame_parms.samples_per_tti - rx_off_diff,
UE->frame_parms.nb_antennas_tx,
1);
if (txs != UE->frame_parms.samples_per_tti - rx_off_diff) {
LOG_E(PHY,"TX : Timeout (sent %d/%d)\n",txs, UE->frame_parms.samples_per_tti-rx_off_diff);
exit_fun( "problem transmitting samples" );
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
// read in first symbol of next frame and adjust for timing drift
......@@ -1170,6 +1180,7 @@ void *UE_thread(void *arg) {
} // UE->is_synchronized==1
} // while !oai_exit
return NULL;
} // UE_thread
/*
......
......@@ -212,6 +212,8 @@ sigh (void *arg);
void
oai_shutdown (void);
void reset_opp_meas_oaisim (void);
void
help (void)
{
......@@ -444,9 +446,6 @@ static Data_Flow_Unit omv_data;
#endif //ALU
static module_id_t UE_inst = 0;
static module_id_t eNB_inst = 0;
#ifdef Rel10
static module_id_t RN_id = 0;
#endif
Packet_OTG_List_t *otg_pdcp_buffer;
......@@ -470,13 +469,8 @@ l2l1_task (void *args_p)
// Framing variables
int32_t sf;
#ifdef Rel10
relaying_type_t r_type = no_relay; // no relaying
#endif
char fname[64], vname[64];
protocol_ctxt_t ctxt;
//#ifdef XFORMS
// current status is that every UE has a DL scope for a SINGLE eNB (eNB_id=0)
// at eNB 0, an UL scope for every UE
......
......@@ -1011,8 +1011,6 @@ int eNB_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void *
int CC_id = device->CC_id;
int subframe;
int ready_for_new_subframe=0;
int subframe_eNB_mask_local;
int sample_count=0;
*ptimestamp = last_eNB_rx_timestamp[eNB_id][CC_id];
......@@ -1064,8 +1062,6 @@ int UE_trx_read(openair0_device *device, openair0_timestamp *ptimestamp, void **
int UE_id = device->Mod_id;
int CC_id = device->CC_id;
int subframe;
int ready_for_new_subframe=0;
int subframe_UE_mask_local;
int sample_count=0;
int read_size;
......@@ -1329,8 +1325,6 @@ void init_openair1(void)
void init_openair2(void)
{
#ifdef OPENAIR2
module_id_t enb_id;
module_id_t UE_id;
int CC_id;
//#warning "eNB index is hard coded to zero"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment