Commit f52cbeeb authored by knopp's avatar knopp

update of ulsim to use phy_procedures

parent bf220352
This diff is collapsed.
......@@ -739,7 +739,7 @@ void ulsch_extract_rbs_single(int32_t **rxdataF,
nb_rb1 = cmin(cmax((int)(frame_parms->N_RB_UL) - (int)(2*first_rb),(int)0),(int)(2*nb_rb)); // 2 times no. RBs before the DC
nb_rb2 = 2*nb_rb - nb_rb1; // 2 times no. RBs after the DC
#ifdef DEBUG_ULSCH
printf("ulsch_extract_rbs_single: 2*nb_rb1 = %d, 2*nb_rb2 = %d\n",nb_rb1,nb_rb2);
#endif
......
......@@ -2346,10 +2346,11 @@ void cba_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq_p
int ret=0;
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
if (eNB->ulsch[UE_id]==NULL) return;
num_active_cba_groups = eNB->ulsch[UE_id]->num_active_cba_groups;
if ((eNB->ulsch[UE_id]) &&
(num_active_cba_groups > 0) &&
if ((num_active_cba_groups > 0) &&
(eNB->ulsch[UE_id]->cba_rnti[UE_id%num_active_cba_groups]>0) &&
(eNB->ulsch[UE_id]->harq_processes[harq_pid]->subframe_cba_scheduling_flag==1)) {
rnti=0;
......@@ -2462,7 +2463,8 @@ void cba_procedures(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,int UE_id,int harq_p
UE_id % eNB->ulsch[UE_id]->num_active_cba_groups, eNB->ulsch[UE_id]->cba_rnti[UE_id%num_active_cba_groups]);
// detect if there is a CBA collision
if (eNB->cba_last_reception[UE_id%num_active_cba_groups] == 0 ) {
if ((eNB->cba_last_reception[UE_id%num_active_cba_groups] == 0 ) &&
(eNB->mac_enabled==1)) {
mac_xface->rx_sdu(eNB->Mod_id,
eNB->CC_id,
frame,subframe,
......@@ -2502,6 +2504,7 @@ void eNB_fep_full(PHY_VARS_eNB *eNB) {
LTE_DL_FRAME_PARMS *fp=&eNB->frame_parms;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_SLOT_FEP,1);
start_meas(&eNB->ofdm_demod_stats);
remove_7_5_kHz(eNB,proc->subframe_rx<<1);
remove_7_5_kHz(eNB,1+(proc->subframe_rx<<1));
for (l=0; l<fp->symbols_per_tti/2; l++) {
......@@ -2520,6 +2523,7 @@ void eNB_fep_full(PHY_VARS_eNB *eNB) {
0
);
}
stop_meas(&eNB->ofdm_demod_stats);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_ENB_SLOT_FEP,0);
......@@ -2626,10 +2630,11 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
const int frame = proc->frame_rx;
int offset = (proc == &eNB->proc.proc_rxtx[0]) ? 0 : 1;
if ((fp->frame_type == TDD) && (subframe_select(fp,subframe)!=SF_UL)) return;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_ENB_RX_UESPEC+offset, 1 );
start_meas(&eNB->phy_proc_rx);
#ifdef DEBUG_PHY_PROC
LOG_D(PHY,"[eNB %d] Frame %d: Doing phy_procedures_eNB_uespec_RX(%d)\n",eNB->Mod_id,frame, subframe);
#endif
......@@ -2920,14 +2925,15 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
eNB->UE_stats[i].ulsch_consecutive_errors++;
// indicate error to MAC
mac_xface->rx_sdu(eNB->Mod_id,
eNB->CC_id,
frame,subframe,
eNB->ulsch[i]->rnti,
NULL,
0,
harq_pid,
&eNB->ulsch[i]->Msg3_flag);
if (eNB->mac_enabled == 1)
mac_xface->rx_sdu(eNB->Mod_id,
eNB->CC_id,
frame,subframe,
eNB->ulsch[i]->rnti,
NULL,
0,
harq_pid,
&eNB->ulsch[i]->Msg3_flag);
}
}
} // ulsch in error
......@@ -2987,15 +2993,15 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
LOG_I(PHY,"[eNB %d][RAPROC] Frame %d Terminating ra_proc for harq %d, UE %d\n",
eNB->Mod_id,
frame,harq_pid,i);
mac_xface->rx_sdu(eNB->Mod_id,
eNB->CC_id,
frame,subframe,
eNB->ulsch[i]->rnti,
eNB->ulsch[i]->harq_processes[harq_pid]->b,
eNB->ulsch[i]->harq_processes[harq_pid]->TBS>>3,
harq_pid,
&eNB->ulsch[i]->Msg3_flag);
if (eNB->mac_enabled)
mac_xface->rx_sdu(eNB->Mod_id,
eNB->CC_id,
frame,subframe,
eNB->ulsch[i]->rnti,
eNB->ulsch[i]->harq_processes[harq_pid]->b,
eNB->ulsch[i]->harq_processes[harq_pid]->TBS>>3,
harq_pid,
&eNB->ulsch[i]->Msg3_flag);
// one-shot msg3 detection by MAC: empty PDU (e.g. CRNTI)
if (eNB->ulsch[i]->Msg3_flag == 0 ) {
......
......@@ -828,7 +828,7 @@ void ue_ulsch_uespec_procedures(PHY_VARS_UE *ue,UE_rxtx_proc_t *proc,uint8_t eNB
int i;
int aa;
int tx_amp;
uint8_t ulsch_input_buffer[2700] __attribute__ ((aligned(16)));
uint8_t ulsch_input_buffer[5477] __attribute__ ((aligned(32)));
uint8_t access_mode;
// get harq_pid from subframe relationship
......
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment