# Doxyfile 1.9.1

# This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project.
#
# All text after a double hash (##) is considered a comment and is placed in
# front of the TAG it is preceding.
#
# All text after a single hash (#) is considered a comment and will be ignored.
# The format is:
# TAG = value [value, ...]
# For lists, items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (\" \").

#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------

# This tag specifies the encoding used for all characters in the configuration
# file that follow. The default is UTF-8 which is also the encoding used for all
# text before the first occurrence of this tag. Doxygen uses libiconv (or the
# iconv built into libc) for the transcoding. See
# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
# The default value is: UTF-8.

DOXYFILE_ENCODING      = UTF-8

# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
# double-quotes, unless you are using Doxywizard) that should identify the
# project for which the documentation is generated. This name is used in the
# title of most generated pages and in a few other places.
# The default value is: My Project.

PROJECT_NAME           = OpenAirInterface

# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
# could be handy for archiving the generated documentation or if some version
# control system is used.

PROJECT_NUMBER         =

# Using the PROJECT_BRIEF tag one can provide an optional one line description
# for a project that appears at the top of each page and should give viewer a
# quick idea about the purpose of the project. Keep the description short.

PROJECT_BRIEF          = "Full experimental OpenSource LTE and NR implementation"

# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
# in the documentation. The maximum height of the logo should not exceed 55
# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
# the logo to the output directory.

PROJECT_LOGO           = @CMAKE_SOURCE_DIR@/doc/oai_logo.png

# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
# entered, it will be relative to the location where doxygen was started. If
# left blank the current directory will be used.

#OUTPUT_DIRECTORY       = .

# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
# directories (in 2 levels) under the output directory of each output format and
# will distribute the generated files over these directories. Enabling this
# option can be useful when feeding doxygen a huge amount of source files, where
# putting all generated files in the same directory would otherwise causes
# performance problems for the file system.
# The default value is: NO.

CREATE_SUBDIRS         = NO

# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
# characters to appear in the names of generated files. If set to NO, non-ASCII
# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
# U+3044.
# The default value is: NO.

ALLOW_UNICODE_NAMES    = NO

# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
# Ukrainian and Vietnamese.
# The default value is: English.

OUTPUT_LANGUAGE        = English

# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
# documentation generated by doxygen is written. Doxygen will use this
# information to generate all generated output in the proper direction.
# Possible values are: None, LTR, RTL and Context.
# The default value is: None.

OUTPUT_TEXT_DIRECTION  = None

# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
# descriptions after the members that are listed in the file and class
# documentation (similar to Javadoc). Set to NO to disable this.
# The default value is: YES.

BRIEF_MEMBER_DESC      = YES

# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
# description of a member or function before the detailed description
#
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
# The default value is: YES.

REPEAT_BRIEF           = YES

# This tag implements a quasi-intelligent brief description abbreviator that is
# used to form the text in various listings. Each string in this list, if found
# as the leading text of the brief description, will be stripped from the text
# and the result, after processing the whole list, is used as the annotated
# text. Otherwise, the brief description is used as-is. If left blank, the
# following values are used ($name is automatically replaced with the name of
# the entity):The $name class, The $name widget, The $name file, is, provides,
# specifies, contains, represents, a, an and the.

ABBREVIATE_BRIEF       =

# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# doxygen will generate a detailed section even if there is only a brief
# description.
# The default value is: NO.

ALWAYS_DETAILED_SEC    = NO

# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# inherited members of a class in the documentation of that class as if those
# members were ordinary class members. Constructors, destructors and assignment
# operators of the base classes will not be shown.
# The default value is: NO.

INLINE_INHERITED_MEMB  = NO

# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
# before files name in the file list and in the header files. If set to NO the
# shortest path that makes the file name unique will be used
# The default value is: YES.

FULL_PATH_NAMES        = NO

# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
# Stripping is only done if one of the specified strings matches the left-hand
# part of the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the path to
# strip.
#
# Note that you can specify absolute paths here, but also relative paths, which
# will be relative from the directory where doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.

STRIP_FROM_PATH        =

# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
# header file to include in order to use a class. If left blank only the name of
# the header file containing the class definition is used. Otherwise one should
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.

STRIP_FROM_INC_PATH    =

# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
# less readable) file names. This can be useful is your file systems doesn't
# support long names like on DOS, Mac, or CD-ROM.
# The default value is: NO.

SHORT_NAMES            = NO

# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
# first line (until the first dot) of a Javadoc-style comment as the brief
# description. If set to NO, the Javadoc-style will behave just like regular Qt-
# style comments (thus requiring an explicit @brief command for a brief
# description.)
# The default value is: NO.

JAVADOC_AUTOBRIEF      = NO

# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
# such as
# /***************
# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
# Javadoc-style will behave just like regular comments and it will not be
# interpreted by doxygen.
# The default value is: NO.

JAVADOC_BANNER         = NO

# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
# line (until the first dot) of a Qt-style comment as the brief description. If
# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
# requiring an explicit \brief command for a brief description.)
# The default value is: NO.

QT_AUTOBRIEF           = NO

# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
# a brief description. This used to be the default behavior. The new default is
# to treat a multi-line C++ comment block as a detailed description. Set this
# tag to YES if you prefer the old behavior instead.
#
# Note that setting this tag to YES also means that rational rose comments are
# not recognized any more.
# The default value is: NO.

MULTILINE_CPP_IS_BRIEF = NO

# By default Python docstrings are displayed as preformatted text and doxygen's
# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the
# doxygen's special commands can be used and the contents of the docstring
# documentation blocks is shown as doxygen documentation.
# The default value is: YES.

PYTHON_DOCSTRING       = YES

# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
# documentation from any documented member that it re-implements.
# The default value is: YES.

INHERIT_DOCS           = NO

# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
# page for each member. If set to NO, the documentation of a member will be part
# of the file/class/namespace that contains it.
# The default value is: NO.

SEPARATE_MEMBER_PAGES  = NO

# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
# uses this value to replace tabs by spaces in code fragments.
# Minimum value: 1, maximum value: 16, default value: 4.

TAB_SIZE               = 4

# This tag can be used to specify a number of aliases that act as commands in
# the documentation. An alias has the form:
# name=value
# For example adding
# "sideeffect=@par Side Effects:\n"
# will allow you to put the command \sideeffect (or @sideeffect) in the
# documentation, which will result in a user-defined paragraph with heading
# "Side Effects:". You can put \n's in the value part of an alias to insert
# newlines (in the resulting output). You can put ^^ in the value part of an
# alias to insert a newline as if a physical newline was in the original file.
# When you need a literal { or } or , in the value part of an alias you have to
# escape them by means of a backslash (\), this can lead to conflicts with the
# commands \{ and \} for these it is advised to use the version @{ and @} or use
# a double escape (\\{ and \\})

ALIASES                =

# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
# instance, some of the names that are used will be different. The list of all
# members will be omitted, etc.
# The default value is: NO.

OPTIMIZE_OUTPUT_FOR_C  = YES

# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
# Python sources only. Doxygen will then generate output that is more tailored
# for that language. For instance, namespaces will be presented as packages,
# qualified scopes will look different, etc.
# The default value is: NO.

OPTIMIZE_OUTPUT_JAVA   = NO

# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
# sources. Doxygen will then generate output that is tailored for Fortran.
# The default value is: NO.

OPTIMIZE_FOR_FORTRAN   = NO

# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for VHDL.
# The default value is: NO.

OPTIMIZE_OUTPUT_VHDL   = NO

# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice
# sources only. Doxygen will then generate output that is more tailored for that
# language. For instance, namespaces will be presented as modules, types will be
# separated into more groups, etc.
# The default value is: NO.

OPTIMIZE_OUTPUT_SLICE  = NO

# Doxygen selects the parser to use depending on the extension of the files it
# parses. With this tag you can assign which parser to use for a given
# extension. Doxygen has a built-in mapping, but you can override or extend it
# using this tag. The format is ext=language, where ext is a file extension, and
# language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, VHDL,
# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
# tries to guess whether the code is fixed or free formatted code, this is the
# default for Fortran type files). For instance to make doxygen treat .inc files
# as Fortran files (default is PHP), and .f files as C (default is Fortran),
# use: inc=Fortran f=C.
#
# Note: For files without extension you can use no_extension as a placeholder.
#
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
# the files are not read by doxygen. When specifying no_extension you should add
# * to the FILE_PATTERNS.
#
# Note see also the list of default file extension mappings.

EXTENSION_MAPPING      =

# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
# documentation. See https://daringfireball.net/projects/markdown/ for details.
# The output of markdown processing is further processed by doxygen, so you can
# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
# case of backward compatibilities issues.
# The default value is: YES.

MARKDOWN_SUPPORT       = NO

# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
# to that level are automatically included in the table of contents, even if
# they do not have an id attribute.
# Note: This feature currently applies only to Markdown headings.
# Minimum value: 0, maximum value: 99, default value: 5.
# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.

TOC_INCLUDE_HEADINGS   = 5

# When enabled doxygen tries to link words that correspond to documented
# classes, or namespaces to their corresponding documentation. Such a link can
# be prevented in individual cases by putting a % sign in front of the word or
# globally by setting AUTOLINK_SUPPORT to NO.
# The default value is: YES.

AUTOLINK_SUPPORT       = YES

# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
# to include (a tag file for) the STL sources as input, then you should set this
# tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string);
# versus func(std::string) {}). This also make the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate.
# The default value is: NO.

BUILTIN_STL_SUPPORT    = NO

# If you use Microsoft's C++/CLI language, you should set this option to YES to
# enable parsing support.
# The default value is: NO.

CPP_CLI_SUPPORT        = NO

# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
# will parse them like normal C++ but will assume all classes use public instead
# of private inheritance when no explicit protection keyword is present.
# The default value is: NO.

SIP_SUPPORT            = NO

# For Microsoft's IDL there are propget and propput attributes to indicate
# getter and setter methods for a property. Setting this option to YES will make
# doxygen to replace the get and set methods by a property in the documentation.
# This will only work if the methods are indeed getting or setting a simple
# type. If this is not the case, or you want to show the methods anyway, you
# should set this option to NO.
# The default value is: YES.

IDL_PROPERTY_SUPPORT   = NO

# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
# all members of a group must be documented explicitly.
# The default value is: NO.

DISTRIBUTE_GROUP_DOC   = NO

# If one adds a struct or class to a group and this option is enabled, then also
# any nested class or struct is added to the same group. By default this option
# is disabled and one has to add nested compounds explicitly via \ingroup.
# The default value is: NO.

GROUP_NESTED_COMPOUNDS = NO

# Set the SUBGROUPING tag to YES to allow class member groups of the same type
# (for instance a group of public functions) to be put as a subgroup of that
# type (e.g. under the Public Functions section). Set it to NO to prevent
# subgrouping. Alternatively, this can be done per class using the
# \nosubgrouping command.
# The default value is: YES.

SUBGROUPING            = YES

# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
# are shown inside the group in which they are included (e.g. using \ingroup)
# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
# and RTF).
#
# Note that this feature does not work in combination with
# SEPARATE_MEMBER_PAGES.
# The default value is: NO.

INLINE_GROUPED_CLASSES = NO

# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
# with only public data fields or simple typedef fields will be shown inline in
# the documentation of the scope in which they are defined (i.e. file,
# namespace, or group documentation), provided this scope is documented. If set
# to NO, structs, classes, and unions are shown on a separate page (for HTML and
# Man pages) or section (for LaTeX and RTF).
# The default value is: NO.

INLINE_SIMPLE_STRUCTS  = NO

# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
# enum is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
# namespace, or class. And the struct will be named TypeS. This can typically be
# useful for C code in case the coding convention dictates that all compound
# types are typedef'ed and only the typedef is referenced, never the tag name.
# The default value is: NO.

TYPEDEF_HIDES_STRUCT   = NO

# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
# cache is used to resolve symbols given their name and scope. Since this can be
# an expensive process and often the same symbol appears multiple times in the
# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
# doxygen will become slower. If the cache is too large, memory is wasted. The
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
# symbols. At the end of a run doxygen will report the cache usage and suggest
# the optimal cache size from a speed point of view.
# Minimum value: 0, maximum value: 9, default value: 0.

LOOKUP_CACHE_SIZE      = 0

# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
# during processing. When set to 0 doxygen will based this on the number of
# cores available in the system. You can set it explicitly to a value larger
# than 0 to get more control over the balance between CPU load and processing
# speed. At this moment only the input processing can be done using multiple
# threads. Since this is still an experimental feature the default is set to 1,
# which efficively disables parallel processing. Please report any issues you
# encounter. Generating dot graphs in parallel is controlled by the
# DOT_NUM_THREADS setting.
# Minimum value: 0, maximum value: 32, default value: 1.

NUM_PROC_THREADS       = 1

#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------

# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
# documentation are documented, even if no documentation was available. Private
# class members and static file members will be hidden unless the
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
# Note: This will also disable the warnings about undocumented members that are
# normally produced when WARNINGS is set to YES.
# The default value is: NO.

EXTRACT_ALL            = YES

# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
# be included in the documentation.
# The default value is: NO.

EXTRACT_PRIVATE        = NO

# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual
# methods of a class will be included in the documentation.
# The default value is: NO.

EXTRACT_PRIV_VIRTUAL   = NO

# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
# scope will be included in the documentation.
# The default value is: NO.

EXTRACT_PACKAGE        = NO

# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
# included in the documentation.
# The default value is: NO.

EXTRACT_STATIC         = YES

# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
# locally in source files will be included in the documentation. If set to NO,
# only classes defined in header files are included. Does not have any effect
# for Java sources.
# The default value is: YES.

EXTRACT_LOCAL_CLASSES  = YES

# This flag is only useful for Objective-C code. If set to YES, local methods,
# which are defined in the implementation section but not in the interface are
# included in the documentation. If set to NO, only methods in the interface are
# included.
# The default value is: NO.

EXTRACT_LOCAL_METHODS  = YES

# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base name of
# the file that contains the anonymous namespace. By default anonymous namespace
# are hidden.
# The default value is: NO.

EXTRACT_ANON_NSPACES   = NO

# If this flag is set to YES, the name of an unnamed parameter in a declaration
# will be determined by the corresponding definition. By default unnamed
# parameters remain unnamed in the output.
# The default value is: YES.

RESOLVE_UNNAMED_PARAMS = YES

# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
# undocumented members inside documented classes or files. If set to NO these
# members will be included in the various overviews, but no documentation
# section is generated. This option has no effect if EXTRACT_ALL is enabled.
# The default value is: NO.

HIDE_UNDOC_MEMBERS     = NO

# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. If set
# to NO, these classes will be included in the various overviews. This option
# has no effect if EXTRACT_ALL is enabled.
# The default value is: NO.

HIDE_UNDOC_CLASSES     = NO

# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
# declarations. If set to NO, these declarations will be included in the
# documentation.
# The default value is: NO.

HIDE_FRIEND_COMPOUNDS  = NO

# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
# documentation blocks found inside the body of a function. If set to NO, these
# blocks will be appended to the function's detailed documentation block.
# The default value is: NO.

HIDE_IN_BODY_DOCS      = NO

# The INTERNAL_DOCS tag determines if documentation that is typed after a
# \internal command is included. If the tag is set to NO then the documentation
# will be excluded. Set it to YES to include the internal documentation.
# The default value is: NO.

INTERNAL_DOCS          = NO

# With the correct setting of option CASE_SENSE_NAMES doxygen will better be
# able to match the capabilities of the underlying filesystem. In case the
# filesystem is case sensitive (i.e. it supports files in the same directory
# whose names only differ in casing), the option must be set to YES to properly
# deal with such files in case they appear in the input. For filesystems that
# are not case sensitive the option should be be set to NO to properly deal with
# output files written for symbols that only differ in casing, such as for two
# classes, one named CLASS and the other named Class, and to also support
# references to files without having to specify the exact matching casing. On
# Windows (including Cygwin) and MacOS, users should typically set this option
# to NO, whereas on Linux or other Unix flavors it should typically be set to
# YES.
# The default value is: system dependent.

CASE_SENSE_NAMES       = YES

# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
# their full class and namespace scopes in the documentation. If set to YES, the
# scope will be hidden.
# The default value is: NO.

HIDE_SCOPE_NAMES       = NO

# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
# append additional text to a page's title, such as Class Reference. If set to
# YES the compound reference will be hidden.
# The default value is: NO.

HIDE_COMPOUND_REFERENCE= NO

# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
# the files that are included by a file in the documentation of that file.
# The default value is: YES.

SHOW_INCLUDE_FILES     = NO

# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
# grouped member an include statement to the documentation, telling the reader
# which file to include in order to use the member.
# The default value is: NO.

SHOW_GROUPED_MEMB_INC  = NO

# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
# files with double quotes in the documentation rather than with sharp brackets.
# The default value is: NO.

FORCE_LOCAL_INCLUDES   = NO

# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
# documentation for inline members.
# The default value is: YES.

INLINE_INFO            = YES

# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
# (detailed) documentation of file and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order.
# The default value is: YES.

SORT_MEMBER_DOCS       = NO

# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
# descriptions of file, namespace and class members alphabetically by member
# name. If set to NO, the members will appear in declaration order. Note that
# this will also influence the order of the classes in the class list.
# The default value is: NO.

SORT_BRIEF_DOCS        = NO

# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
# (brief and detailed) documentation of class members so that constructors and
# destructors are listed first. If set to NO the constructors will appear in the
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
# member documentation.
# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
# detailed member documentation.
# The default value is: NO.

SORT_MEMBERS_CTORS_1ST = NO

# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
# of group names into alphabetical order. If set to NO the group names will
# appear in their defined order.
# The default value is: NO.

SORT_GROUP_NAMES       = NO

# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
# fully-qualified names, including namespaces. If set to NO, the class list will
# be sorted only by class name, not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the alphabetical
# list.
# The default value is: NO.

SORT_BY_SCOPE_NAME     = NO

# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
# type resolution of all parameters of a function it will reject a match between
# the prototype and the implementation of a member function even if there is
# only one candidate or it is obvious which candidate to choose by doing a
# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
# accept a match between prototype and implementation in such cases.
# The default value is: NO.

STRICT_PROTO_MATCHING  = NO

# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
# list. This list is created by putting \todo commands in the documentation.
# The default value is: YES.

GENERATE_TODOLIST      = YES

# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
# list. This list is created by putting \test commands in the documentation.
# The default value is: YES.

GENERATE_TESTLIST      = YES

# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
# list. This list is created by putting \bug commands in the documentation.
# The default value is: YES.

GENERATE_BUGLIST       = YES

# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
# the deprecated list. This list is created by putting \deprecated commands in
# the documentation.
# The default value is: YES.

GENERATE_DEPRECATEDLIST= YES

# The ENABLED_SECTIONS tag can be used to enable conditional documentation
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.

ENABLED_SECTIONS       =

# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
# documentation. If the initializer consists of more lines than specified here
# it will be hidden. Use a value of 0 to hide initializers completely. The
# appearance of the value of individual variables and macros / defines can be
# controlled using \showinitializer or \hideinitializer command in the
# documentation regardless of this setting.
# Minimum value: 0, maximum value: 10000, default value: 30.

MAX_INITIALIZER_LINES  = 30

# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
# the bottom of the documentation of classes and structs. If set to YES, the
# list will mention the files that were used to generate the documentation.
# The default value is: YES.

SHOW_USED_FILES        = NO

# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
# will remove the Files entry from the Quick Index and from the Folder Tree View
# (if specified).
# The default value is: YES.

SHOW_FILES             = NO

# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
# page. This will remove the Namespaces entry from the Quick Index and from the
# Folder Tree View (if specified).
# The default value is: YES.

SHOW_NAMESPACES        = YES

# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
# popen()) the command command input-file, where command is the value of the
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
# by doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.

FILE_VERSION_FILTER    =

# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
# output files in an output format independent way. To create the layout file
# that represents doxygen's defaults, run doxygen with the -l option. You can
# optionally specify a file name after the option, if omitted DoxygenLayout.xml
# will be used as the name of the layout file.
#
# Note that if you run doxygen from a directory containing a file called
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.

LAYOUT_FILE            =

# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
# the reference definitions. This must be a list of .bib files. The .bib
# extension is automatically appended if omitted. This requires the bibtex tool
# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
# For LaTeX the style of the bibliography can be controlled using
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
# search path. See also \cite for info how to create references.

CITE_BIB_FILES         =

#---------------------------------------------------------------------------
# Configuration options related to warning and progress messages
#---------------------------------------------------------------------------

# The QUIET tag can be used to turn on/off the messages that are generated to
# standard output by doxygen. If QUIET is set to YES this implies that the
# messages are off.
# The default value is: NO.

QUIET                  = NO

# The WARNINGS tag can be used to turn on/off the warning messages that are
# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
# this implies that the warnings are on.
#
# Tip: Turn warnings on while writing the documentation.
# The default value is: YES.

WARNINGS               = YES

# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
# will automatically be disabled.
# The default value is: YES.

WARN_IF_UNDOCUMENTED   = YES

# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some parameters
# in a documented function, or documenting parameters that don't exist or using
# markup commands wrongly.
# The default value is: YES.

WARN_IF_DOC_ERROR      = YES

# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
# are documented, but have no documentation for their parameters or return
# value. If set to NO, doxygen will only warn about wrong or incomplete
# parameter documentation, but not about the absence of documentation. If
# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
# The default value is: NO.

WARN_NO_PARAMDOC       = NO

# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
# at the end of the doxygen process doxygen will return with a non-zero status.
# Possible values are: NO, YES and FAIL_ON_WARNINGS.
# The default value is: NO.

WARN_AS_ERROR          = NO

# The WARN_FORMAT tag determines the format of the warning messages that doxygen
# can produce. The string should contain the $file, $line, and $text tags, which
# will be replaced by the file and line number from which the warning originated
# and the warning text. Optionally the format may contain $version, which will
# be replaced by the version of the file (if it could be obtained via
# FILE_VERSION_FILTER)
# The default value is: $file:$line: $text.

WARN_FORMAT            = "$file:$line: $text"

# The WARN_LOGFILE tag can be used to specify a file to which warning and error
# messages should be written. If left blank the output is written to standard
# error (stderr).

WARN_LOGFILE           = cmake_targets/log/doxy.log

#---------------------------------------------------------------------------
# Configuration options related to the input files
#---------------------------------------------------------------------------

# The INPUT tag is used to specify the files and/or directories that contain
# documented source files. You may enter file names like myfile.cpp or
# directories like /usr/src/myproject. Separate the files or directories with
# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
# Note: If this tag is empty the current directory is searched.
EXCLUDE_PATTERNS = if4_tools.c
INPUT                  = \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/config_load_configmodule.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/config_load_configmodule.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/libconfig/config_libconfig.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/libconfig/config_libconfig.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/libconfig/config_libconfig_private.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/config_paramdesc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/config_userapi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/config_userapi.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/config/config_cmdline.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/time_meas.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/time_meas.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/utils.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/oai_asn1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/system.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/nr/nr_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/nr/nr_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/hashtable/obj_hashtable.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/hashtable/hashtable.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/hashtable/hashtable.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/hashtable/obj_hashtable.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/time_stat.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/system.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/load_module_shlib.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_proccmd.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_cpumeasur_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_loader.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_phycmd.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_loader.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_measurements.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_ltemeasur_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_measurements.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_proccmd.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_bearer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_enb_measurements.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_enb_phycmd.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_ci.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv/telnetsrv_5Gue_measurements.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/lte/prach_utils.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/lte/prach_utils.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/lte/ue_power.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/LOG/log_if.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/LOG/vcd_signal_dumper.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/LOG/vcd_signal_dumper.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/LOG/log.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/LOG/log.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/time_stat.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/ocp_itti/all_msg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/ocp_itti/intertask_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/utils.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/T_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/check_vcd.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/extract_output_subframe.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/utils.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/database.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/event.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/database.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/extract_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/configuration.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/configuration.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/extract_input_subframe.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/utils.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/replay.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/extract.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/event.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/record.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/multi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/macpdu2wireshark.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/tracer/packet-mac-lte.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/genids.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/local_tracer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/T.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/T_IDs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/T.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T/defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/collection/tree.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/collection/queue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/collection/linear_alloc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/assertions.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/load_module_shlib.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/simple_executable.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/threadPool/thread-pool.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/threadPool/thread-pool.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/ds/byte_array.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/ds/byte_array.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/openairinterface5g_limits.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/platform_constants.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/ngran_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/ran_context.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/gnb_ind_vars.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/nfapi_vnf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/gnb_ind_vars.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/vendor_ext.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/nfapi_vnf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/nfapi_pnf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/nfapi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/oai_integration/nfapi_pnf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/common/public_inc/debug.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/common/src/debug.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/public_inc/nfapi_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface_scf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/public_inc/sidelink_nr_ue_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_constants.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/public_inc/nfapi_nr_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/src/nfapi_p4.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/src/nfapi_p7.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/src/nfapi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/src/nfapi_p5.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/nfapi/inc/nfapi.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/public_inc/nfapi_vnf_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/src/vnf_p7.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/src/vnf_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/src/vnf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/src/vnf_p7_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/inc/vnf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/vnf/inc/vnf_p7.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/public_inc/nfapi_pnf_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/src/pnf_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/src/pnf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/src/pnf_p7_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/src/pnf_p7.c \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/inc/pnf_p7.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf/inc/pnf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/sim_common/inc/vendor_ext.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf_sim/inc/fapi_stub.h \
@CMAKE_CURRENT_SOURCE_DIR@/../nfapi/open-nFAPI/pnf_sim/inc/fapi_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/softmodem-common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-softmodem.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-cuup.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/stats.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-softmodem-common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/softmodem-common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-softmodem.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-gnb.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/rt_profiling.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-uesoftmodem.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-uesoftmodem.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/lte-softmodem.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/stats.c \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/thread-common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../executables/nr-ru.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_eNB_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_eNB_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_eNB_task.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_eNB_task.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SCTP/sctp_eNB_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_overload.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_ue_context.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_context_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_trace.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_handlers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_ue_context.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_context_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_decoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_handlers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_encoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_nas_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_nas_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_nnsf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_overload.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_nnsf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_trace.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/S1AP/s1ap_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_nnsf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_nnsf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_context_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_nas_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_overload.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_ue_context.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_handlers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_trace.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_encoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_trace.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_handlers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_context_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_nas_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_decoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_ue_context.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_overload.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NGAP/ngap_gNB_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/secu_defs.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/sha_256_hmac.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eea0.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128_ecb.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/rijndael.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eea2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eea1.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128_cbc_cmac.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eia1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/snow3g.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128_ctr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/kdf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/secu_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/rijndael.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/kdf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eea1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eea0.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/key_nas_deriver.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128_ecb.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128_ctr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eia2.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/snow3g.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/sha_256_hmac.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/aes_128_cbc_cmac.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eia1.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eia2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/nas_stream_eea2.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/SECU/key_nas_deriver.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/MME_APP/mme_app.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_interface_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_generate_messages.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_interface_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_encoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_timers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_ids.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_timers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_decoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_interface_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_interface_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MME_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_ids.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/M3AP/m3ap_MCE_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/UICC/usim_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/UICC/usim_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/ocp-gtpu/gtp_itf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/NR_UE/nr_nas_msg_sim.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/NR_UE/ue_process_nas.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/NR_UE/nr_nas_msg_sim.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/user_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emm_proc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emm_main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emmData.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/Authentication.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SecurityModeControl.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/TrackingAreaUpdate.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emm_timers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/Detach.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/Attach.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SecurityModeControl.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/IdleMode.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emm_proc_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/IdleMode_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/LowerLayer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/Authentication.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/IdleMode.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/LowerLayer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/EmmStatusHdl.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emm_fsm_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/ServiceRequestHdl.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/emm_main.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_reg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegistered.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmNull.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_fsm.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_recv.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmTrackingAreaUpdatingInitiated.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredNormalService.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_as.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_asDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredInitiated.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_sap.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_fsm.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregistered.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_send.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_as.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredUpdateNeeded.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredLimitedService.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredNoImsi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmServiceRequestInitiated.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredNoCellAvailable.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredPlmnSearch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_esm.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_recv.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_reg.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredAttemptingToUpdate.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredLimitedService.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_regDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredAttemptingToAttach.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredInitiated.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_esmDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredNormalService.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_sap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredAttachNeeded.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_send.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/emm_esm.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmDeregisteredNoCellAvailable.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredPlmnSearch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/SAP/EmmRegisteredImsiDetachInitiated.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/Identification.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/EMM/LowerLayer_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_parser.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_ue_task.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_proc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_user.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_proc_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_network.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USIM/aka_functions.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USIM/usim_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USIM/usim_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USIM/aka_functions.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/user_indication.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/user_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/user_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/at_command.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/at_command.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/at_error.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/user_api_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/at_response.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/user_indication.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/at_response.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/API/USER/at_error.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_parser.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_ue_task.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/DefaultEpsBearerContextActivation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_ebr_context.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_pt_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/PdnConnectivity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_ip.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/PdnDisconnect.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_ebr_context.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/DedicatedEpsBearerContextActivation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_proc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_pt.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_ebr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/EsmStatusHdl.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_ebr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_main.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esm_pt.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/esmData.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_recv.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_send.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_sap.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_send.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_sap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_recv.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/SAP/esm_sapDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/ESM/EpsBearerContextDeactivation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_user.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_network.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/UE/nas_proc.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/securityDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/CsServiceNotification.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateComplete.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/NASSecurityModeComplete.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/SecurityModeReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/EmmInformation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/CsServiceNotification.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/SecurityModeComplete.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/DetachRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/SecurityModeCommand.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateComplete.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/DetachAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/DetachRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/DownlinkNasTransport.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSUplinkNasTransport.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/UplinkNasTransport.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/ServiceReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/RegistrationAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/emm_msg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/SecurityModeReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSDeregistrationRequestUEOriginating.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/UplinkNasTransport.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationFailure.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationResponse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachComplete.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSNASSecurityModeComplete.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/ExtendedServiceRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/GutiReallocationComplete.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/DownlinkNasTransport.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/emm_msgDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSAuthenticationResponse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/ServiceReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSIdentityResponse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachComplete.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/NASSecurityModeCommand.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/EmmStatus.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationResponse.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/GutiReallocationCommand.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/ServiceRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/IdentityResponse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/GutiReallocationComplete.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/RegistrationComplete.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/ServiceRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/RegistrationAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/IdentityRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/RegistrationRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/DetachAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AttachRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSIdentityResponse.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/EmmStatus.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationFailure.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSAuthenticationResponse.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/TrackingAreaUpdateRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/emm_msg.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/AuthenticationReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/ExtendedServiceRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSNASSecurityModeComplete.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/IdentityResponse.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/RegistrationComplete.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSDeregistrationRequestUEOriginating.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/emm_cause.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/EmmInformation.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/IdentityRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/FGSUplinkNasTransport.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/GutiReallocationCommand.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/EMM/MSG/RegistrationRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/parser.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/device.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/device.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/TLVEncoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/OctetString.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/nas_timer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/TLVDecoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/nas_timer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/mem/memory.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/OctetString.c \
@CMAKE_CURRENT_SOURCE_DIR@/../common/utils/mem/oai_memory.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/TLVDecoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/nas_log.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/TLVEncoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/socket.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/stty.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/UTIL/socket.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/API/NETWORK/network_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/API/NETWORK/nas_message.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/API/NETWORK/network_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/API/NETWORK/nas_message.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/API/NETWORK/as_message.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ServiceType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationParameterRand.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/UeRadioCapabilityInformationUpdateNeeded.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ProtocolDiscriminator.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ExtendedProtocolDiscriminator.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/CsfbResponse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EsmCause.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ProcedureTransactionIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/CipheringKeySequenceNumber.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationResponseParameter.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/DaylightSavingTime.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/DaylightSavingTime.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PdnType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EmmCause.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MobileStationClassmark2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LlcServiceAccessPointIdentifier.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ProtocolConfigurationOptions.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TransactionIdentifier.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ExtendedProtocolDiscriminator.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/GutiType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SupportedCodecList.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MobileStationClassmark3.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AccessPointName.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PlmnList.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrafficFlowAggregateDescription.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PlmnList.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/Nonce.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TimeZone.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/Cli.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasSecurityAlgorithms.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/IdentityType2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/VoiceDomainPreferenceAndUeUsageSetting.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsAttachResult.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EmergencyNumberList.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsNetworkFeatureSupport.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/CsfbResponse.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrafficFlowAggregateDescription.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PacketFlowIdentifier.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrackingAreaIdentityList.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/UeSecurityCapability.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ApnAggregateMaximumBitRate.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ImeisvRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SpareHalfOctet.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PdnType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ShortMac.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MobileStationClassmark3.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrafficFlowTemplate.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SORTransparentContainer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasPagingIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasMessageContainer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/Cli.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasRequestType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PagingIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ApnAggregateMaximumBitRate.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/DetachType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EmergencyNumberList.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EsmMessageContainer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSRegistrationResult.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/GprsTimer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TmsiStatus.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/VoiceDomainPreferenceAndUeUsageSetting.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/IdentityType2.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsQualityOfService.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LocationAreaIdentification.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGCNasMessageContainer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrackingAreaIdentityList.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MsNetworkCapability.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ShortMac.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSRegistrationResult.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationFailureParameter.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrackingAreaIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EmmCause.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/KsiAndSequenceNumber.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/CipheringKeySequenceNumber.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LlcServiceAccessPointIdentifier.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsAttachType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/RadioPriority.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationFailureParameter.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MsNetworkFeatureSupport.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/Nonce.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationParameterAutn.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PdnAddress.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EsmInformationTransferFlag.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SpareHalfOctet.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/KsiAndSequenceNumber.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LocationAreaIdentification.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/QualityOfService.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ProcedureTransactionIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NrUESecurityCapability.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ProtocolConfigurationOptions.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SsCode.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsQualityOfService.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrafficFlowTemplate.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/RadioPriority.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ProtocolDiscriminator.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsMobileIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MobileIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SsCode.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSRegistrationType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TrackingAreaIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsBearerIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasMessageContainer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/DetachType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGMMCapability.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TmsiStatus.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MobileStationClassmark2.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MessageType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/DrxParameter.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TransactionIdentifier.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsUpdateResult.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/QualityOfService.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasKeySetIdentifier.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MobileIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/GprsTimer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AdditionalUpdateType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasRequestType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsBearerContextStatus.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSMobileIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LcsClientIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSMobileIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ServiceType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PagingIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/UeNetworkCapability.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NrUESecurityCapability.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationParameterAutn.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PdnAddress.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsUpdateType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/UeSecurityCapability.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PTmsiSignature.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PacketFlowIdentifier.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/UeRadioCapabilityInformationUpdateNeeded.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGCNasMessageContainer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/PTmsiSignature.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsMobileIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/GutiType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsBearerContextStatus.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsNetworkFeatureSupport.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LcsIndicator.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LcsIndicator.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AdditionalUpdateResult.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/DrxParameter.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NetworkName.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MsNetworkCapability.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TimeZone.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasKeySetIdentifier.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsAttachResult.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AccessPointName.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGMMCapability.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AdditionalUpdateResult.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsAttachType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/UeNetworkCapability.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSDeregistrationType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EsmMessageContainer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SecurityHeaderType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EsmCause.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NasSecurityAlgorithms.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SORTransparentContainer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LinkedEpsBearerIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AdditionalUpdateType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MsNetworkFeatureSupport.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TimeZoneAndTime.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/ImeisvRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/MessageType.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SecurityHeaderType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LcsClientIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationParameterRand.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsBearerIdentity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EsmInformationTransferFlag.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/TimeZoneAndTime.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/FGSRegistrationType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsUpdateResult.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/EpsUpdateType.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/AuthenticationResponseParameter.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/NetworkName.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/LinkedEpsBearerIdentity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/IES/SupportedCodecList.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/NR_NAS_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/milenage.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/EsmStatus.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ModifyEpsBearerContextReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/esm_msg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ModifyEpsBearerContextRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDefaultEpsBearerContextAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceAllocationRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDefaultEpsBearerContextRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ModifyEpsBearerContextAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/EsmInformationResponse.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/EsmStatus.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnConnectivityRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnDisconnectReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PduSessionEstablishmentAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnConnectivityReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceModificationRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceModificationRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/DeactivateEpsBearerContextAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDefaultEpsBearerContextReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/EsmInformationRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceAllocationReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnConnectivityReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PduSessionEstablishRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnDisconnectRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/DeactivateEpsBearerContextAccept.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/DeactivateEpsBearerContextRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceModificationReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/DeactivateEpsBearerContextRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/EsmInformationRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/esm_cause.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ModifyEpsBearerContextRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnConnectivityRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceModificationReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PduSessionEstablishmentAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PduSessionEstablishRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/esm_msgDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceAllocationReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDedicatedEpsBearerContextRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDefaultEpsBearerContextRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ModifyEpsBearerContextAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDefaultEpsBearerContextReject.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ModifyEpsBearerContextReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnDisconnectRequest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/esm_msg.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/BearerResourceAllocationRequest.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/PdnDisconnectReject.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/EsmInformationResponse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/ESM/MSG/ActivateDefaultEpsBearerContextAccept.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/userDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/COMMON/nr_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/NAS/gNB/network_process_nas.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair3/UTILS/conversions.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_encoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_ids.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_timers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_generate_messages.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_generate_messages.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_decoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_timers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_ids.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/X2AP/x2ap_eNB_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/MCE_APP/mce_app.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/MCE_APP/mce_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/MCE_APP/mce_app.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/MCE_APP/mce_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_generate_messages.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_interface_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_ids.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_encoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_generate_messages.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_ids.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_management_procedures.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_timers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_generate_messages.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_interface_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_decoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_management_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_timers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_interface_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_interface_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_MCE_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_generate_messages.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/M2AP/m2ap_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NETWORK_DRIVER/MESH/ioctl.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NETWORK_DRIVER/MESH/constant.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NETWORK_DRIVER/MESH/rrc_nas_primitives.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_COMMON/nr_mac_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_COMMON/nr_compute_tbs_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_COMMON/nr_mac_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_COMMON/nr_mac_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_COMMON/nr_mac.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity_am.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity_um.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity_tm.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_asn1_utils.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity_tm.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_oai_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_pdu.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_sdu.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_ue_manager.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_pdu.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity_am.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_sdu.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_ue_manager.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_oai_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/asn1_utils.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_rlc/nr_rlc_entity_um.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/pre_processor.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_fairRR.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/ue_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/mac_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/rar_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_bch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/mac.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/rar_tools_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/config_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_primitives.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_fairRR.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_ulsch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_RA.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_mch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/mac_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_phytest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler_dlsch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/main_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/ra_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/defs_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/config_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/eNB_scheduler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/slicing/slicing.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/slicing/slicing_internal.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/slicing/slicing.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/MAC/l1_helpers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/mac_rrc_ul.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_srs.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/mac_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/mac_rrc_ul_direct.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/nr_mac_gNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_dlsch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/mac_rrc_dl_handler.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/mac_rrc_ul_f1ap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_primitives.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_phytest.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_bch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/openair2_proc.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/RLC/rlc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/mac_vars.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/mac_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/mac_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/nr_ue_power_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/config_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/mac_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/nr_ra_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/main_ue_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/nr_ue_scheduler.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/NR_MAC_UE/nr_ue_dci_configuration.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/PDCP_v10.1.0/pdcp.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/PDCP_v10.1.0/pdcp_primitives.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/PDCP_v10.1.0/pdcp.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/PDCP_v10.1.0/pdcp_sequence_manager.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/PDCP_v10.1.0/pdcp_util.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_ue_manager.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_asn1_utils.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_e1_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_integrity_nia2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_timer_thread.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_e1_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_integrity_nia2.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_security_nea2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_security_nea2.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_entity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_timer_thread.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_oai_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_entity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_sdu.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_integrity_nia1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_oai_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_ue_manager.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_sdu.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/asn1_utils.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/LAYER2/nr_pdcp/nr_pdcp_integrity_nia1.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_UE_PHY_INTERFACE/NR_Packet_Drop.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_UE_PHY_INTERFACE/NR_Packet_Drop.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OPT/wireshark_headers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OPT/opt.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OPT/probe.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OPT/mac_pcap.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg_tx.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg_rx.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg_models.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg_externs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/OTG/otg_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/MATH/oml.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/UTIL/MATH/oml.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_ue_context_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_interface_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_ids.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_paging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_rrc_message_transfer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_interface_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_paging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_ue_context_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_itti_messaging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_task.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_system_information.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_paging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_rrc_message_transfer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_encoder.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_paging.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_warning_message_transmission.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_ue_context_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_handlers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_ue_context_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_task.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_warning_message_transmission.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_rrc_message_transfer.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_rrc_message_transfer.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_task.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_task.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_ids.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_itti_messaging.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_du_interface_management.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/F1AP/f1ap_cu_interface_management.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/gnb_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/gnb_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/L1_nr_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/RRC_nr_paramsvalues.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/gnb_app.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/MACRLC_nr_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/gnb_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/GNB_APP/gnb_app.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/queue_t.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/phy_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/IF_Module.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/phy_stub_UE.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/phy_interface_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/phy_stub_UE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/IF_Module_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/phy_interface_vars.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/queue_t.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/PHY_INTERFACE/IF_Module.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/pdcp_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/mac_rrc_primitives.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/ngap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/rlc_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/m3ap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/sctp_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/x2ap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/commonDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/udp_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/nas_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/sctp_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../common/platform_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/ngap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/gtpv1_u_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/rlc_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/e1ap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/phy_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/s1ap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/networkDef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/f1ap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/mac_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/udp_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/gtpv1_u_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/s1ap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/rrc_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/e1ap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/m3ap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/phy_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/x2ap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/mac_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/openair_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/as_message.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/nas_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/pdcp_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/m2ap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/prs_nr_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/f1ap_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/m2ap_messages_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/COMMON/rrc_messages_def.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_UE.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_sl_preconfig.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_nsa.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_vars.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/sl_preconfig_paramvalues.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_timers_and_constants.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/main_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/rrc_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR_UE/L2_interface_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/L2_INTERFACE/openair_rrc_L2_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NAS/rb_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NAS/rb_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NAS/nas_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NAS/nas_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_internode.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/cucp_cuup_if.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/cucp_cuup_direct.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_GTPV1U.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/mac_rrc_dl_direct.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_radio_bearers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_NGAP.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_UE_context.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/MESSAGES/asn1_msg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/MESSAGES/asn1_msg.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_UE_context.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/cucp_cuup_e1ap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_radio_bearers.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/nr_rrc_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_reconfig.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_NGAP.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/mac_rrc_dl_f1ap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_GTPV1U.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/mac_rrc_dl.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/NR/rrc_gNB_nsa.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_GTPV1U.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_S1AP.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_GTPV1U.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_UE.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_UE_context.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_UE_context.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_endc.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/L2_interface_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_types_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/MESSAGES/asn1_msg.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/MESSAGES/asn1_msg.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/MESSAGES/asn1_msg_NB_IoT.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_vars.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/L2_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_M2AP.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/proto_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/plmn_data.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/defs_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/L2_interface_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_M2AP.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/extern_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/RRC/LTE/rrc_eNB_S1AP.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_paramdef_emtc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_config.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_paramdef_mme.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_paramdef_mce.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/L1_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_app.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_config_SL.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_config_eMTC.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_paramdef_sidelink.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/MACRLC_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/RRC_config_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_paramdef.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/RRC_config_tools.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_app.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/RRC_paramsvalues.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/NB_IoT_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/ENB_APP/enb_config.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_api.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_default_values.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_api.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_setup.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/E1AP/e1ap_asnc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_PHY_INTERFACE/nr_sched_response.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_PHY_INTERFACE/nr_sched_response.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_PHY_INTERFACE/NR_IF_Module.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/NR_PHY_INTERFACE/NR_IF_Module.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/SDAP/nr_sdap/nr_sdap.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/SDAP/nr_sdap/nr_sdap.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/SDAP/nr_sdap/nr_sdap_entity.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair2/SDAP/nr_sdap/nr_sdap_entity.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_gNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/impl_defs_top.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/phy_extern_nr_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/lte_parms.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/nr_init_ru.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/nr_parms.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/lte_init_ru.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/init_top.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/nr_init.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/phy_init.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/nr_phy_init.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/nr_init_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/defs_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/INIT/lte_init.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dci.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/uci_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pss.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/transport_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/power_control.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/prach_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dci_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/ulsch_demodulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pmch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/uci_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/transport_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pcfich.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pucch_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pucch_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/rar_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/mdci.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/prach_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dlsch_tbs_full.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dci_tools_common_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pucch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pmch_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pbch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/phich.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dlsch_scrambling.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/lte_mcs.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/transport_common_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/sss.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/sss_gen.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pilots.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pcfich_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dci_tools_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/transport_vars.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/phich_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dlsch_modulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dci_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/group_hopping.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/if4_tools.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/uci_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/prach.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/edci.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/pilots_mbsfn.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/proto_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/ulsch_decoding.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dlsch_coding.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/transport_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/defs_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dci.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_TRANSPORT/dlsch_tbs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_nr_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_ulsch.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_csi_rs.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/pucch_rx.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_sch_dmrs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dlsch.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dci.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dci_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dlsch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_prs.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_ulsch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_ulsch_llr_computation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_prach_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dci.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_sch_dmrs.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_transport_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_pss.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_tbs_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_prach.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/srs_rx.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_ulsch_demodulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_pbch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_transport_common_proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_sss.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_uci_tools_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dlsch_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_prach.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_TRANSPORT/nr_scrambling.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/impl_defs_top_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_L1_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_UE_TRANSPORT/srs_modulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_UE_TRANSPORT/transport_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_UE_TRANSPORT/get_pmi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_UE_TRANSPORT/transport_proto_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_UE_TRANSPORT/drs_modulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_ESTIMATION/lte_sync_time.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_ESTIMATION/freq_equalization.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_ESTIMATION/lte_adjust_sync_eNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_ESTIMATION/lte_estimation.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_ESTIMATION/lte_eNB_measurements.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/modulation_UE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/modulation_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/nr_modulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/ofdm_mod.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/modulation_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/ul_7_5_kHz.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/nr_modulation.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/compute_bf_weights.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/beamforming.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/modulation_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/slot_fep_ul.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/MODULATION/slot_fep_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/phy_vars.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/ptrs_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/nr_gold.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/nr_dmrs_rx.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/pss_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/nr_gen_mod_table.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/ul_ref_seq_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/ul_ref_seq_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/sss_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/scrambling_luts.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/dmrs_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/refsig_defs_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/ptrs_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/nr_refsig.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/dmrs_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/nr_mod_table.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/ss_pbch_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_REFSIG/nr_gold_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/phy_extern_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/3gpplte_turbo_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/coding_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/3gpplte_turbo_decoder_avx2_16bit.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/coding_load.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/viterbi_lte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/crc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nr_rate_matching.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/viterbi.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_load.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nr_segmentation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nr_polar_init.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/coding_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/crc_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/crcext.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrSmallBlock/encodeSmallBlock.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrSmallBlock/nr_small_block_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrSmallBlock/decodeSmallBlock.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/ccoding_byte_lte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/lte_rate_matching.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/3gpplte_sse.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/lte_interleaver_inline.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_lut.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_bnProc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc_avx512/main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc_avx512/cnProc_gen_BG2_avx512.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc_avx512/cnProc_gen_BG1_avx512.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/main128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProcPc_gen_BG1_avx2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProc_gen_BG2_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProcPc_gen_BG1_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProcPc_gen_BG2_avx2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProc_gen_BG2_avx2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProc_gen_BG1_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProc_gen_BG1_avx2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc/bnProcPc_gen_BG2_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc/main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc/cnProc_gen_BG1_avx2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc/cnProc_gen_BG1_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc/main128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc/cnProc_gen_BG2_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_cnProc/cnProc_gen_BG2_avx2.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc_avx512/main.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc_avx512/bnProcPc_gen_BG1_avx512.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc_avx512/bnProc_gen_BG2_avx512.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc_avx512/bnProc_gen_BG1_avx512.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_tools/generator_bnProc_avx512/bnProcPc_gen_BG2_avx512.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_cnProc.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_mPass.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_init.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_decoder/nrLDPCdecoder_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/ccoding_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc384_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc80_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc160_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc128_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc120_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc208_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc288_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc112_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc192_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_encode_parity_check.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc176_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc352_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc128_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc224_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8seg.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_generate_coefficient.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc104_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc320_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc96_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc224_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc256_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc288_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc320_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc384_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc352_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc192_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc192_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc192_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc320_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc288_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_encoder_optim8segmulti.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc144_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc320_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc384_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc72_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc96_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc288_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc240_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc384_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc176_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc256_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc224_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc352_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc256_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc224_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc160_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc256_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc88_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc208_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc240_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrLDPC_encoder/ldpc_BG2_Zc352_byte_128.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_uci_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_interleaving_pattern.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_decoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_bitwise_operations.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_decoding_tools.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_kernal_operation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_crc_byte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_dci_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_pbch_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_sequence_pattern.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_encoder.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/nrPolar_tools/nr_polar_matrix_and_array.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/defs_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/lte_segmentation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/CODING/3gpplte.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_refsig.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_dl_uespec.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_gold.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_ul_ref.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_gold_mbsfn.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/defs_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_dl_mbsfn.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/LTE_REFSIG/lte_dl_cell_spec.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_nr_UE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/cic_filter_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_ulsch_coding.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/srs_modulation_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_transport_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_ulsch_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/cic_filter_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_demodulation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/csi_rx.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_initial_sync.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/pucch_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/pss_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_pbch.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_decoding.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/srs_modulation_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/pucch_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/sss_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/dci_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_dlsch_llr_computation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_prach.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_TRANSPORT/nr_ue_rf_helpers.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_RU.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/impl_defs_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/types_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_ESTIMATION/nr_dl_channel_estimation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_ESTIMATION/nr_adjust_synch_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_ESTIMATION/nr_estimation.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_ESTIMATION/nr_ue_measurements.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_ESTIMATION/filt16a_32.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_UE_ESTIMATION/nr_adjust_gain.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/types.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/defs_UE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/file_output.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/sqrt.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/cdot_prod.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/phy_scope_interface.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/oai_dfts_neon.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/cmult_vv.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/cmult_sv.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/dB_routines.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/dfts_load.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/log2_approx.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/phy_scope_interface.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/simde_operations.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/lut.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/nr_phy_scope.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/nr_phy_scope.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/lte_phy_scope.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/nr_phy_qt_scope.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/cadd_vv.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/phy_scope.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/signal_energy.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/oai_dfts.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/lte_ue_scope.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/lte_phy_scope.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/tools_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/TOOLS/alaw_lut.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/phy_vars_nr_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/phy_vars_ue.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/sse_intrin.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/impl_defs_lte_NB_IoT.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/phy_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_ESTIMATION/nr_ul_estimation.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_ESTIMATION/nr_freq_equalization.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_ESTIMATION/nr_measurements_gNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY/NR_ESTIMATION/nr_ul_channel_estimation.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/proto.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/multicast_link.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/netlink_init.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/multicast_link.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/socket.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/socket.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/ETH_TRANSPORT/defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/RF/adc.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/RF/dac.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/RF/rf.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/RF/rf.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/multipath_channel.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/taus.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/rangen_double.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/scm_corrmat.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/multipath_tv_channel.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/abstraction.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/random_channel.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/phase_noise.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/channel_sim.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SIMULATION/TOOLS/sim.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/phy_frame_config_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/harq_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/fapi_nr_ue_l1.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/phy_frame_config_nr_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/pucch_uci_ue_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/harq_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/phy_procedures_nr_ue.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/pucch_uci_ue_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/phy_sch_processing_time.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/fapi_nr_ue_l1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR_UE/defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/fapi_l1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/prach_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/nfapi_nr_dummy.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/sched_common_extern.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/phy_procedures_lte_common.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/phy_procedures_lte_eNb.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/sched_common.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/fapi_l1.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/ru_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED/sched_eNB.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_UE/sched_UE.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/phy_frame_config_nr.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/phy_frame_config_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/nr_prach_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/fapi_nr_l1.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/phy_procedures_nr_gNB.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/sched_nr.h \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/fapi_nr_l1.c \
@CMAKE_CURRENT_SOURCE_DIR@/../openair1/SCHED_NR/nr_ru_procedures.c \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/ETHERNET/if_defs.h \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/ETHERNET/ethernet_lib.h \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/COMMON/record_player.c \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/COMMON/record_player.h \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/COMMON/common_lib.h \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/COMMON/common_lib.c \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/iqplayer/iqplayer_lib.c \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/rfsimulator/simulator.c \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/rfsimulator/rfsimulator.h \
@CMAKE_CURRENT_SOURCE_DIR@/../radio/rfsimulator/apply_channelmod.c

# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
# documentation (see:
# https://www.gnu.org/software/libiconv/) for the list of possible encodings.
# The default value is: UTF-8.

INPUT_ENCODING         = UTF-8

# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
# *.h) to filter out the source-files in the directories.
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
# read by doxygen.
#
# Note the list of default checked file patterns might differ from the list of
# default file extension mappings.
#
# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
# *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C comment),
# *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, *.vhdl,
# *.ucf, *.qsf and *.ice.

FILE_PATTERNS          = *.h

# The RECURSIVE tag can be used to specify whether or not subdirectories should
# be searched for input files as well.
# The default value is: NO.

RECURSIVE              = NO

# The EXCLUDE tag can be used to specify files and/or directories that should be
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
#
# Note that relative paths are relative to the directory from which doxygen is
# run.

EXCLUDE                =

# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
# from the input.
# The default value is: NO.

EXCLUDE_SYMLINKS       = NO

# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories.
#
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories for example use the pattern */test/*

EXCLUDE_PATTERNS       =

# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
# AClass::ANamespace, ANamespace::*Test
#
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories use the pattern */test/*

EXCLUDE_SYMBOLS        =

# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).

EXAMPLE_PATH           =

# If the value of the EXAMPLE_PATH tag contains directories, you can use the
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
# *.h) to filter out the source-files in the directories. If left blank all
# files are included.

EXAMPLE_PATTERNS       =

# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
# searched for input files to be used with the \include or \dontinclude commands
# irrespective of the value of the RECURSIVE tag.
# The default value is: NO.

EXAMPLE_RECURSIVE      = NO

# The IMAGE_PATH tag can be used to specify one or more files or directories
# that contain images that are to be included in the documentation (see the
# \image command).

IMAGE_PATH             = @CMAKE_CURRENT_SOURCE_DIR@/images

# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
# by executing (via popen()) the command:
#
# <filter> <input-file>
#
# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
# name of an input file. Doxygen will then use the output that the filter
# program writes to standard output. If FILTER_PATTERNS is specified, this tag
# will be ignored.
#
# Note that the filter must not add or remove lines; it is applied before the
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
# properly processed by doxygen.

INPUT_FILTER           =

# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
# basis. Doxygen will compare the file name with each pattern and apply the
# filter if there is a match. The filters are a list of the form: pattern=filter
# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
# patterns match the file name, INPUT_FILTER is applied.
#
# Note that for custom extensions or not directly supported extensions you also
# need to set EXTENSION_MAPPING for the extension otherwise the files are not
# properly processed by doxygen.

FILTER_PATTERNS        =

# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
# INPUT_FILTER) will also be used to filter the input files that are used for
# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
# The default value is: NO.

FILTER_SOURCE_FILES    = NO

# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
# it is also possible to disable source filtering for a specific pattern using
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.

FILTER_SOURCE_PATTERNS =

# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
# and want to reuse the introduction page also for the doxygen output.

USE_MDFILE_AS_MAINPAGE =

#---------------------------------------------------------------------------
# Configuration options related to source browsing
#---------------------------------------------------------------------------

# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
# generated. Documented entities will be cross-referenced with these sources.
#
# Note: To get rid of all source code in the generated output, make sure that
# also VERBATIM_HEADERS is set to NO.
# The default value is: NO.

SOURCE_BROWSER         = YES

# Setting the INLINE_SOURCES tag to YES will include the body of functions,
# classes and enums directly into the documentation.
# The default value is: NO.

INLINE_SOURCES         = NO

# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
# special comment blocks from generated source code fragments. Normal C, C++ and
# Fortran comments will always remain visible.
# The default value is: YES.

STRIP_CODE_COMMENTS    = YES

# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
# entity all documented functions referencing it will be listed.
# The default value is: NO.

REFERENCED_BY_RELATION = NO

# If the REFERENCES_RELATION tag is set to YES then for each documented function
# all documented entities called/used by that function will be listed.
# The default value is: NO.

REFERENCES_RELATION    = NO

# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
# to YES then the hyperlinks from functions in REFERENCES_RELATION and
# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
# link to the documentation.
# The default value is: YES.

REFERENCES_LINK_SOURCE = YES

# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
# source code will show a tooltip with additional information such as prototype,
# brief description and links to the definition and documentation. Since this
# will make the HTML file larger and loading of large files a bit slower, you
# can opt to disable this feature.
# The default value is: YES.
# This tag requires that the tag SOURCE_BROWSER is set to YES.

SOURCE_TOOLTIPS        = YES

# If the USE_HTAGS tag is set to YES then the references to source code will
# point to the HTML generated by the htags(1) tool instead of doxygen built-in
# source browser. The htags tool is part of GNU's global source tagging system
# (see https://www.gnu.org/software/global/global.html). You will need version
# 4.8.6 or higher.
#
# To use it do the following:
# - Install the latest version of global
# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file
# - Make sure the INPUT points to the root of the source tree
# - Run doxygen as normal
#
# Doxygen will invoke htags (and that will in turn invoke gtags), so these
# tools must be available from the command line (i.e. in the search path).
#
# The result: instead of the source browser generated by doxygen, the links to
# source code will now point to the output of htags.
# The default value is: NO.
# This tag requires that the tag SOURCE_BROWSER is set to YES.

USE_HTAGS              = NO

# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
# verbatim copy of the header file for each class for which an include is
# specified. Set to NO to disable this.
# See also: Section \class.
# The default value is: YES.

VERBATIM_HEADERS       = YES

# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
# clang parser (see:
# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
# performance. This can be particularly helpful with template rich C++ code for
# which doxygen's built-in parser lacks the necessary type information.
# Note: The availability of this option depends on whether or not doxygen was
# generated with the -Duse_libclang=ON option for CMake.
# The default value is: NO.

CLANG_ASSISTED_PARSING = NO

# If clang assisted parsing is enabled and the CLANG_ADD_INC_PATHS tag is set to
# YES then doxygen will add the directory of each input to the include path.
# The default value is: YES.

CLANG_ADD_INC_PATHS    = YES

# If clang assisted parsing is enabled you can provide the compiler with command
# line options that you would normally use when invoking the compiler. Note that
# the include paths will already be set by doxygen for the files and directories
# specified with INPUT and INCLUDE_PATH.
# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.

CLANG_OPTIONS          =

# If clang assisted parsing is enabled you can provide the clang parser with the
# path to the directory containing a file called compile_commands.json. This
# file is the compilation database (see:
# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
# options used when the source files were built. This is equivalent to
# specifying the -p option to a clang tool, such as clang-check. These options
# will then be passed to the parser. Any options specified with CLANG_OPTIONS
# will be added as well.
# Note: The availability of this option depends on whether or not doxygen was
# generated with the -Duse_libclang=ON option for CMake.

CLANG_DATABASE_PATH    =

#---------------------------------------------------------------------------
# Configuration options related to the alphabetical class index
#---------------------------------------------------------------------------

# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
# compounds will be generated. Enable this if the project contains a lot of
# classes, structs, unions or interfaces.
# The default value is: YES.

ALPHABETICAL_INDEX     = NO

# In case all classes in a project start with a common prefix, all classes will
# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
# can be used to specify a prefix (or a list of prefixes) that should be ignored
# while generating the index headers.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

IGNORE_PREFIX          =

#---------------------------------------------------------------------------
# Configuration options related to the HTML output
#---------------------------------------------------------------------------

# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
# The default value is: YES.

GENERATE_HTML          = YES

# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: html.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_OUTPUT            = html

# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
# generated HTML page (for example: .htm, .php, .asp).
# The default value is: .html.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_FILE_EXTENSION    = .html

# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
# each generated HTML page. If the tag is left blank doxygen will generate a
# standard header.
#
# To get valid HTML the header file that includes any scripts and style sheets
# that doxygen needs, which is dependent on the configuration options used (e.g.
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
# default header using
# doxygen -w html new_header.html new_footer.html new_stylesheet.css
# YourConfigFile
# and then modify the file new_header.html. See also section "Doxygen usage"
# for information on how to generate the default header that doxygen normally
# uses.
# Note: The header is subject to change so you typically have to regenerate the
# default header when upgrading to a newer version of doxygen. For a description
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_HEADER            =

# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
# generated HTML page. If the tag is left blank doxygen will generate a standard
# footer. See HTML_HEADER for more information on how to generate a default
# footer and what special commands can be used inside the footer. See also
# section "Doxygen usage" for information on how to generate the default footer
# that doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_FOOTER            =

# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
# the HTML output. If left blank doxygen will generate a default style sheet.
# See also section "Doxygen usage" for information on how to generate the style
# sheet that doxygen normally uses.
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
# it is more robust and this tag (HTML_STYLESHEET) will in the future become
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_STYLESHEET        =

# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# cascading style sheets that are included after the standard style sheets
# created by doxygen. Using this option one can overrule certain style aspects.
# This is preferred over using HTML_STYLESHEET since it does not replace the
# standard style sheet and is therefore more robust against future updates.
# Doxygen will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the last
# style sheet in the list overrules the setting of the previous ones in the
# list). For an example see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_EXTRA_STYLESHEET  =

# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# that these files will be copied to the base HTML output directory. Use the
# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
# files will be copied as-is; there are no commands or markers available.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_EXTRA_FILES       =

# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the style sheet and background images according to
# this color. Hue is specified as an angle on a colorwheel, see
# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
# purple, and 360 is red again.
# Minimum value: 0, maximum value: 359, default value: 220.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_COLORSTYLE_HUE    = 220

# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
# in the HTML output. For a value of 0 the output will use grayscales only. A
# value of 255 will produce the most vivid colors.
# Minimum value: 0, maximum value: 255, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_COLORSTYLE_SAT    = 100

# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
# luminance component of the colors in the HTML output. Values below 100
# gradually make the output lighter, whereas values above 100 make the output
# darker. The value divided by 100 is the actual gamma applied, so 80 represents
# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
# change the gamma.
# Minimum value: 40, maximum value: 240, default value: 80.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_COLORSTYLE_GAMMA  = 80

# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
# page will contain the date and time when the page was generated. Setting this
# to YES can help to show when doxygen was last run and thus if the
# documentation is up to date.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_TIMESTAMP         = YES

# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
# documentation will contain a main index with vertical navigation menus that
# are dynamically created via JavaScript. If disabled, the navigation index will
# consists of multiple levels of tabs that are statically embedded in every HTML
# page. Disable this option to support browsers that do not have JavaScript,
# like the Qt help browser.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_DYNAMIC_MENUS     = YES

# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_DYNAMIC_SECTIONS  = NO

# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
# shown in the various tree structured indices initially; the user can expand
# and collapse entries dynamically later on. Doxygen will expand the tree to
# such a level that at most the specified number of entries are visible (unless
# a fully collapsed tree already exceeds this amount). So setting the number of
# entries 1 will produce a full collapsed tree by default. 0 is a special value
# representing an infinite number of entries and will result in a full expanded
# tree by default.
# Minimum value: 0, maximum value: 9999, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_INDEX_NUM_ENTRIES = 100

# If the GENERATE_DOCSET tag is set to YES, additional index files will be
# generated that can be used as input for Apple's Xcode 3 integrated development
# environment (see:
# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To
# create a documentation set, doxygen will generate a Makefile in the HTML
# output directory. Running make will produce the docset in that directory and
# running make install will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
# genXcode/_index.html for more information.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_DOCSET        = NO

# This tag determines the name of the docset feed. A documentation feed provides
# an umbrella under which multiple documentation sets from a single provider
# (such as a company or product suite) can be grouped.
# The default value is: Doxygen generated docs.
# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_FEEDNAME        = "Doxygen generated docs"

# This tag specifies a string that should uniquely identify the documentation
# set bundle. This should be a reverse domain-name style string, e.g.
# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_BUNDLE_ID       = fr.eurecom.openairinterface

# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
# the documentation publisher. This should be a reverse domain-name style
# string, e.g. com.mycompany.MyDocSet.documentation.
# The default value is: org.doxygen.Publisher.
# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_PUBLISHER_ID    = fr.eurecom.openairinterface

# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
# The default value is: Publisher.
# This tag requires that the tag GENERATE_DOCSET is set to YES.

DOCSET_PUBLISHER_NAME  = EURECOM

# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
# (see:
# https://www.microsoft.com/en-us/download/details.aspx?id=21138) on Windows.
#
# The HTML Help Workshop contains a compiler that can convert all HTML output
# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
# files are now used as the Windows 98 help format, and will replace the old
# Windows help format (.hlp) on all Windows platforms in the future. Compressed
# HTML files also contain an index, a table of contents, and you can search for
# words in the documentation. The HTML workshop also contains a viewer for
# compressed HTML files.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_HTMLHELP      = NO

# The CHM_FILE tag can be used to specify the file name of the resulting .chm
# file. You can add a path in front of the file if the result should not be
# written to the html output directory.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

CHM_FILE               = irs_openair.chm

# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler (hhc.exe). If non-empty,
# doxygen will try to run the HTML help compiler on the generated index.hhp.
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

HHC_LOCATION           =

# The GENERATE_CHI flag controls if a separate .chi index file is generated
# (YES) or that it should be included in the main .chm file (NO).
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

GENERATE_CHI           = NO

# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

CHM_INDEX_ENCODING     =

# The BINARY_TOC flag controls whether a binary table of contents is generated
# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
# enables the Previous and Next buttons.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

BINARY_TOC             = NO

# The TOC_EXPAND flag can be set to YES to add extra items for group members to
# the table of contents of the HTML help documentation and to the tree view.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

TOC_EXPAND             = NO

# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
# (.qch) of the generated HTML documentation.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_QHP           = NO

# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
# the file name of the resulting .qch file. The path specified is relative to
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.

QCH_FILE               =

# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
# (see:
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_NAMESPACE          = org.doxygen.Project

# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
# Help Project output. For more information please see Qt Help Project / Virtual
# Folders (see:
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders).
# The default value is: doc.
# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_VIRTUAL_FOLDER     = doc

# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
# filter to add. For more information please see Qt Help Project / Custom
# Filters (see:
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_CUST_FILTER_NAME   =

# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
# Filters (see:
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters).
# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_CUST_FILTER_ATTRS  =

# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.

QHP_SECT_FILTER_ATTRS  =

# The QHG_LOCATION tag can be used to specify the location (absolute path
# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
# run qhelpgenerator on the generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.

QHG_LOCATION           =

# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
# install this plugin and make it available under the help contents menu in
# Eclipse, the contents of the directory containing the HTML and XML files needs
# to be copied into the plugins directory of eclipse. The name of the directory
# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
# After copying Eclipse needs to be restarted before the help appears.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_ECLIPSEHELP   = NO

# A unique identifier for the Eclipse help plugin. When installing the plugin
# the directory name containing the HTML and XML files should also have this
# name. Each documentation set should have its own identifier.
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.

ECLIPSE_DOC_ID         = org.doxygen.Project

# If you want full control over the layout of the generated HTML pages it might
# be necessary to disable the index and replace it with your own. The
# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
# of each HTML page. A value of NO enables the index and the value YES disables
# it. Since the tabs in the index contain the same information as the navigation
# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

DISABLE_INDEX          = NO

# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information. If the tag
# value is set to YES, a side panel will be generated containing a tree-like
# index structure (just like the one that is generated for HTML Help). For this
# to work a browser that supports JavaScript, DHTML, CSS and frames is required
# (i.e. any modern browser). Windows users are probably better off using the
# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
# further fine-tune the look of the index. As an example, the default style
# sheet generated by doxygen has an example that shows how to put an image at
# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
# the same information as the tab index, you could consider setting
# DISABLE_INDEX to YES when enabling this option.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

GENERATE_TREEVIEW      = YES

# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
# doxygen will group on one line in the generated HTML documentation.
#
# Note that a value of 0 will completely suppress the enum values from appearing
# in the overview section.
# Minimum value: 0, maximum value: 20, default value: 4.
# This tag requires that the tag GENERATE_HTML is set to YES.

ENUM_VALUES_PER_LINE   = 4

# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
# to set the initial width (in pixels) of the frame in which the tree is shown.
# Minimum value: 0, maximum value: 1500, default value: 250.
# This tag requires that the tag GENERATE_HTML is set to YES.

TREEVIEW_WIDTH         = 250

# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
# external symbols imported via tag files in a separate window.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

EXT_LINKS_IN_WINDOW    = NO

# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see
# https://inkscape.org) to generate formulas as SVG images instead of PNGs for
# the HTML output. These images will generally look nicer at scaled resolutions.
# Possible values are: png (the default) and svg (looks nicer but requires the
# pdf2svg or inkscape tool).
# The default value is: png.
# This tag requires that the tag GENERATE_HTML is set to YES.

HTML_FORMULA_FORMAT    = png

# Use this tag to change the font size of LaTeX formulas included as images in
# the HTML documentation. When you change the font size after a successful
# doxygen run you need to manually remove any form_*.png images from the HTML
# output directory to force them to be regenerated.
# Minimum value: 8, maximum value: 50, default value: 10.
# This tag requires that the tag GENERATE_HTML is set to YES.

FORMULA_FONTSIZE       = 10

# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
# generated for formulas are transparent PNGs. Transparent PNGs are not
# supported properly for IE 6.0, but are supported on all modern browsers.
#
# Note that when changing this option you need to delete any form_*.png files in
# the HTML output directory before the changes have effect.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.

FORMULA_TRANSPARENT    = YES

# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
# to create new LaTeX commands to be used in formulas as building blocks. See
# the section "Including formulas" for details.

FORMULA_MACROFILE      =

# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
# https://www.mathjax.org) which uses client side JavaScript for the rendering
# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
# installed or if you want to formulas look prettier in the HTML output. When
# enabled you may also need to install MathJax separately and configure the path
# to it using the MATHJAX_RELPATH option.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.

USE_MATHJAX            = NO

# When MathJax is enabled you can set the default output format to be used for
# the MathJax output. See the MathJax site (see:
# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details.
# Possible values are: HTML-CSS (which is slower, but has the best
# compatibility), NativeMML (i.e. MathML) and SVG.
# The default value is: HTML-CSS.
# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_FORMAT         = HTML-CSS

# When MathJax is enabled you need to specify the location relative to the HTML
# output directory using the MATHJAX_RELPATH option. The destination directory
# should contain the MathJax.js script. For instance, if the mathjax directory
# is located at the same level as the HTML output directory, then
# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
# Content Delivery Network so you can quickly see the result without installing
# MathJax. However, it is strongly recommended to install a local copy of
# MathJax from https://www.mathjax.org before deployment.
# The default value is: https://cdn.jsdelivr.net/npm/mathjax@2.
# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest

# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
# extension names that should be enabled during MathJax rendering. For example
# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_EXTENSIONS     =

# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
# of code that will be used on startup of the MathJax code. See the MathJax site
# (see:
# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an
# example see the documentation.
# This tag requires that the tag USE_MATHJAX is set to YES.

MATHJAX_CODEFILE       =

# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
# the HTML output. The underlying search engine uses javascript and DHTML and
# should work on any modern browser. Note that when using HTML help
# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
# there is already a search function so this one should typically be disabled.
# For large projects the javascript based search engine can be slow, then
# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
# search using the keyboard; to jump to the search box use <access key> + S
# (what the <access key> is depends on the OS and browser, but it is typically
# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
# key> to jump into the search results window, the results can be navigated
# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
# the search. The filter options can be selected when the cursor is inside the
# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
# to select a filter and <Enter> or <escape> to activate or cancel the filter
# option.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.

SEARCHENGINE           = YES

# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
# implemented using a web server instead of a web client using JavaScript. There
# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
# setting. When disabled, doxygen will generate a PHP script for searching and
# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
# and searching needs to be provided by external tools. See the section
# "External Indexing and Searching" for details.
# The default value is: NO.
# This tag requires that the tag SEARCHENGINE is set to YES.

SERVER_BASED_SEARCH    = NO

# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
# script for searching. Instead the search results are written to an XML file
# which needs to be processed by an external indexer. Doxygen will invoke an
# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
# search results.
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
# Xapian (see:
# https://xapian.org/).
#
# See the section "External Indexing and Searching" for details.
# The default value is: NO.
# This tag requires that the tag SEARCHENGINE is set to YES.

EXTERNAL_SEARCH        = NO

# The SEARCHENGINE_URL should point to a search engine hosted by a web server
# which will return the search results when EXTERNAL_SEARCH is enabled.
#
# Doxygen ships with an example indexer (doxyindexer) and search engine
# (doxysearch.cgi) which are based on the open source search engine library
# Xapian (see:
# https://xapian.org/). See the section "External Indexing and Searching" for
# details.
# This tag requires that the tag SEARCHENGINE is set to YES.

SEARCHENGINE_URL       =

# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
# search data is written to a file for indexing by an external tool. With the
# SEARCHDATA_FILE tag the name of this file can be specified.
# The default file is: searchdata.xml.
# This tag requires that the tag SEARCHENGINE is set to YES.

SEARCHDATA_FILE        = searchdata.xml

# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
# projects and redirect the results back to the right project.
# This tag requires that the tag SEARCHENGINE is set to YES.

EXTERNAL_SEARCH_ID     =

# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
# projects other than the one defined by this configuration file, but that are
# all added to the same external search index. Each project needs to have a
# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
# to a relative location where the documentation can be found. The format is:
# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
# This tag requires that the tag SEARCHENGINE is set to YES.

EXTRA_SEARCH_MAPPINGS  =

#---------------------------------------------------------------------------
# Configuration options related to the LaTeX output
#---------------------------------------------------------------------------

# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
# The default value is: YES.

GENERATE_LATEX         = NO

# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: latex.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_OUTPUT           = latex

# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
# invoked.
#
# Note that when not enabling USE_PDFLATEX the default is latex when enabling
# USE_PDFLATEX the default is pdflatex and when in the later case latex is
# chosen this is overwritten by pdflatex. For specific output languages the
# default can have been set differently, this depends on the implementation of
# the output language.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_CMD_NAME         = latex

# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
# index for LaTeX.
# Note: This tag is used in the Makefile / make.bat.
# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file
# (.tex).
# The default file is: makeindex.
# This tag requires that the tag GENERATE_LATEX is set to YES.

MAKEINDEX_CMD_NAME     = makeindex

# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to
# generate index for LaTeX. In case there is no backslash (\) as first character
# it will be automatically added in the LaTeX code.
# Note: This tag is used in the generated output file (.tex).
# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat.
# The default value is: makeindex.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_MAKEINDEX_CMD    = makeindex

# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.

COMPACT_LATEX          = NO

# The PAPER_TYPE tag can be used to set the paper type that is used by the
# printer.
# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
# 14 inches) and executive (7.25 x 10.5 inches).
# The default value is: a4.
# This tag requires that the tag GENERATE_LATEX is set to YES.

PAPER_TYPE             = a4

# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
# that should be included in the LaTeX output. The package can be specified just
# by its name or with the correct syntax as to be used with the LaTeX
# \usepackage command. To get the times font for instance you can specify :
# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
# To use the option intlimits with the amsmath package you can specify:
# EXTRA_PACKAGES=[intlimits]{amsmath}
# If left blank no extra packages will be included.
# This tag requires that the tag GENERATE_LATEX is set to YES.

EXTRA_PACKAGES         = amsmath \
                         amssymb

# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
# generated LaTeX document. The header should contain everything until the first
# chapter. If it is left blank doxygen will generate a standard header. See
# section "Doxygen usage" for information on how to let doxygen write the
# default header to a separate file.
#
# Note: Only use a user-defined header if you know what you are doing! The
# following commands have a special meaning inside the header: $title,
# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
# string, for the replacement values of the other commands the user is referred
# to HTML_HEADER.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_HEADER           =  @CMAKE_SOURCE_DIR@/doc/openair_header.tex

# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
# generated LaTeX document. The footer should contain everything after the last
# chapter. If it is left blank doxygen will generate a standard footer. See
# LATEX_HEADER for more information on how to generate a default footer and what
# special commands can be used inside the footer.
#
# Note: Only use a user-defined footer if you know what you are doing!
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_FOOTER           =

# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
# LaTeX style sheets that are included after the standard style sheets created
# by doxygen. Using this option one can overrule certain style aspects. Doxygen
# will copy the style sheet files to the output directory.
# Note: The order of the extra style sheet files is of importance (e.g. the last
# style sheet in the list overrules the setting of the previous ones in the
# list).
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_EXTRA_STYLESHEET =

# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the LATEX_OUTPUT output
# directory. Note that the files will be copied as-is; there are no commands or
# markers available.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_EXTRA_FILES      =

# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
# contain links (just like the HTML output) instead of page references. This
# makes the output suitable for online browsing using a PDF viewer.
# The default value is: YES.
# This tag requires that the tag GENERATE_LATEX is set to YES.

PDF_HYPERLINKS         = YES

# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
# specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX
# files. Set this option to YES, to get a higher quality PDF documentation.
#
# See also section LATEX_CMD_NAME for selecting the engine.
# The default value is: YES.
# This tag requires that the tag GENERATE_LATEX is set to YES.

USE_PDFLATEX           = YES

# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
# command to the generated LaTeX files. This will instruct LaTeX to keep running
# if errors occur, instead of asking the user for help. This option is also used
# when generating formulas in HTML.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_BATCHMODE        = NO

# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
# index chapters (such as File Index, Compound Index, etc.) in the output.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_HIDE_INDICES     = NO

# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
# code with syntax highlighting in the LaTeX output.
#
# Note that which sources are shown also depends on other settings such as
# SOURCE_BROWSER.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_SOURCE_CODE      = NO

# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
# bibliography, e.g. plainnat, or ieeetr. See
# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
# The default value is: plain.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_BIB_STYLE        = plain

# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
# page will contain the date and time when the page was generated. Setting this
# to NO can help when comparing the output of multiple runs.
# The default value is: NO.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_TIMESTAMP        = NO

# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
# path from which the emoji images will be read. If a relative path is entered,
# it will be relative to the LATEX_OUTPUT directory. If left blank the
# LATEX_OUTPUT directory will be used.
# This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_EMOJI_DIRECTORY  =

#---------------------------------------------------------------------------
# Configuration options related to the RTF output
#---------------------------------------------------------------------------

# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
# RTF output is optimized for Word 97 and may not look too pretty with other RTF
# readers/editors.
# The default value is: NO.

GENERATE_RTF           = NO

# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: rtf.
# This tag requires that the tag GENERATE_RTF is set to YES.

RTF_OUTPUT             = rtf

# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
# documents. This may be useful for small projects and may help to save some
# trees in general.
# The default value is: NO.
# This tag requires that the tag GENERATE_RTF is set to YES.

COMPACT_RTF            = NO

# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
# contain hyperlink fields. The RTF file will contain links (just like the HTML
# output) instead of page references. This makes the output suitable for online
# browsing using Word or some other Word compatible readers that support those
# fields.
#
# Note: WordPad (write) and others do not support links.
# The default value is: NO.
# This tag requires that the tag GENERATE_RTF is set to YES.

RTF_HYPERLINKS         = NO

# Load stylesheet definitions from file. Syntax is similar to doxygen's
# configuration file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value.
#
# See also section "Doxygen usage" for information on how to generate the
# default style sheet that doxygen normally uses.
# This tag requires that the tag GENERATE_RTF is set to YES.

RTF_STYLESHEET_FILE    =

# Set optional variables used in the generation of an RTF document. Syntax is
# similar to doxygen's configuration file. A template extensions file can be
# generated using doxygen -e rtf extensionFile.
# This tag requires that the tag GENERATE_RTF is set to YES.

RTF_EXTENSIONS_FILE    =

# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
# with syntax highlighting in the RTF output.
#
# Note that which sources are shown also depends on other settings such as
# SOURCE_BROWSER.
# The default value is: NO.
# This tag requires that the tag GENERATE_RTF is set to YES.

RTF_SOURCE_CODE        = NO

#---------------------------------------------------------------------------
# Configuration options related to the man page output
#---------------------------------------------------------------------------

# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
# classes and files.
# The default value is: NO.

GENERATE_MAN           = NO

# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it. A directory man3 will be created inside the directory specified by
# MAN_OUTPUT.
# The default directory is: man.
# This tag requires that the tag GENERATE_MAN is set to YES.

MAN_OUTPUT             = man

# The MAN_EXTENSION tag determines the extension that is added to the generated
# man pages. In case the manual section does not start with a number, the number
# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
# optional.
# The default value is: .3.
# This tag requires that the tag GENERATE_MAN is set to YES.

MAN_EXTENSION          = .3

# The MAN_SUBDIR tag determines the name of the directory created within
# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
# MAN_EXTENSION with the initial . removed.
# This tag requires that the tag GENERATE_MAN is set to YES.

MAN_SUBDIR             =

# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
# will generate one additional man file for each entity documented in the real
# man page(s). These additional files only source the real man page, but without
# them the man command would be unable to find the correct page.
# The default value is: NO.
# This tag requires that the tag GENERATE_MAN is set to YES.

MAN_LINKS              = NO

#---------------------------------------------------------------------------
# Configuration options related to the XML output
#---------------------------------------------------------------------------

# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
# captures the structure of the code including all documentation.
# The default value is: NO.

GENERATE_XML           = NO

# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: xml.
# This tag requires that the tag GENERATE_XML is set to YES.

XML_OUTPUT             = xml

# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
# listings (including syntax highlighting and cross-referencing information) to
# the XML output. Note that enabling this will significantly increase the size
# of the XML output.
# The default value is: YES.
# This tag requires that the tag GENERATE_XML is set to YES.

XML_PROGRAMLISTING     = YES

# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
# namespace members in file scope as well, matching the HTML output.
# The default value is: NO.
# This tag requires that the tag GENERATE_XML is set to YES.

XML_NS_MEMB_FILE_SCOPE = NO

#---------------------------------------------------------------------------
# Configuration options related to the DOCBOOK output
#---------------------------------------------------------------------------

# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
# that can be used to generate PDF.
# The default value is: NO.

GENERATE_DOCBOOK       = NO

# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
# front of it.
# The default directory is: docbook.
# This tag requires that the tag GENERATE_DOCBOOK is set to YES.

DOCBOOK_OUTPUT         = docbook

# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
# program listings (including syntax highlighting and cross-referencing
# information) to the DOCBOOK output. Note that enabling this will significantly
# increase the size of the DOCBOOK output.
# The default value is: NO.
# This tag requires that the tag GENERATE_DOCBOOK is set to YES.

DOCBOOK_PROGRAMLISTING = NO

#---------------------------------------------------------------------------
# Configuration options for the AutoGen Definitions output
#---------------------------------------------------------------------------

# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
# the structure of the code including all documentation. Note that this feature
# is still experimental and incomplete at the moment.
# The default value is: NO.

GENERATE_AUTOGEN_DEF   = NO

#---------------------------------------------------------------------------
# Configuration options related to the Perl module output
#---------------------------------------------------------------------------

# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
# file that captures the structure of the code including all documentation.
#
# Note that this feature is still experimental and incomplete at the moment.
# The default value is: NO.

GENERATE_PERLMOD       = NO

# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
# output from the Perl module output.
# The default value is: NO.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.

PERLMOD_LATEX          = NO

# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
# formatted so it can be parsed by a human reader. This is useful if you want to
# understand what is going on. On the other hand, if this tag is set to NO, the
# size of the Perl module output will be much smaller and Perl will parse it
# just the same.
# The default value is: YES.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.

PERLMOD_PRETTY         = YES

# The names of the make variables in the generated doxyrules.make file are
# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
# so different doxyrules.make files included by the same Makefile don't
# overwrite each other's variables.
# This tag requires that the tag GENERATE_PERLMOD is set to YES.

PERLMOD_MAKEVAR_PREFIX =

#---------------------------------------------------------------------------
# Configuration options related to the preprocessor
#---------------------------------------------------------------------------

# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
# C-preprocessor directives found in the sources and include files.
# The default value is: YES.

ENABLE_PREPROCESSING   = YES

# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
# in the source code. If set to NO, only conditional compilation will be
# performed. Macro expansion can be done in a controlled way by setting
# EXPAND_ONLY_PREDEF to YES.
# The default value is: NO.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

MACRO_EXPANSION        = YES

# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
# the macro expansion is limited to the macros specified with the PREDEFINED and
# EXPAND_AS_DEFINED tags.
# The default value is: NO.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

EXPAND_ONLY_PREDEF     = YES

# If the SEARCH_INCLUDES tag is set to YES, the include files in the
# INCLUDE_PATH will be searched if a #include is found.
# The default value is: YES.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

SEARCH_INCLUDES        = YES

# The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by the
# preprocessor.
# This tag requires that the tag SEARCH_INCLUDES is set to YES.

INCLUDE_PATH= @CMAKE_CURRENT_SOURCE_DIR@/../common @CMAKE_CURRENT_SOURCE_DIR@/../common/config @CMAKE_CURRENT_SOURCE_DIR@/../common/utils  @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/nr @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/hashtable  @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/telnetsrv  @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/lte @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/LOG  @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/T  @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/collection @CMAKE_CURRENT_SOURCE_DIR@/../common/utils/ocp_itti  @CMAKE_CURRENT_SOURCE_DIR@/..//executables @CMAKE_CURRENT_SOURCE_DIR@/../openair1/PHY 

# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
# patterns (like *.h and *.hpp) to filter out the header-files in the
# directories. If left blank, the patterns specified with FILE_PATTERNS will be
# used.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

INCLUDE_FILE_PATTERNS  =

# The PREDEFINED tag can be used to specify one or more macro names that are
# defined before the preprocessor is started (similar to the -D option of e.g.
# gcc). The argument of the tag is a list of macros of the form: name or
# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
# is assumed. To prevent a macro definition from being undefined via #undef or
# recursively expanded use the := operator instead of the = operator.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

PREDEFINED             = OPENAIR_LTE=1 \
                         RLC_MODULE=1 \
                         RLC_C=1 \
                         RLC_MAC_C=1 \
                         RLC_RRC_C=1 \
                         RLC_AM_C=1 \
                         RLC_AM_MODULE=1 \
                         RLC_AM_REASSEMBLY_C=1 \
                         RLC_AM_IN_SDU_C=1 \
                         RLC_AM_RETRANSMIT_C=1 \
                         RLC_AM_RX_LIST_C=1 \
                         RLC_AM_SEGMENT_C=1 \
                         RLC_AM_SEGMENT_HOLES_C=1 \
                         RLC_AM_STATUS_REPORT_C=1 \
                         RLC_AM_TIMER_POLL_RETRANSMIT_C=1 \
                         RLC_AM_TIMER_POLL_REORDERING_C=1 \
                         RLC_AM_TIMER_STATUS_PROHIBIT_C=1 \
                         RLC_AM_WINDOWS_C=1 \
                         RLC_UM_MODULE=1 \
                         RLC_UM_C=1 \
                         RLC_TM_MODULE=1 \
                         RLC_UM_C=1 \
                         __attribute__(x)=

# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
# tag can be used to specify a list of macro names that should be expanded. The
# macro definition that is found in the sources will be used. Use the PREDEFINED
# tag if you want to use a different macro definition that overrules the
# definition found in the source code.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

EXPAND_AS_DEFINED      = private_rlc_um(x)=x

# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
# remove all references to function-like macros that are alone on a line, have
# an all uppercase name, and do not end with a semicolon. Such function macros
# are typically used for boiler-plate code, and will confuse the parser if not
# removed.
# The default value is: YES.
# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

SKIP_FUNCTION_MACROS   = YES

#---------------------------------------------------------------------------
# Configuration options related to external references
#---------------------------------------------------------------------------

# The TAGFILES tag can be used to specify one or more tag files. For each tag
# file the location of the external documentation should be added. The format of
# a tag file without this location is as follows:
# TAGFILES = file1 file2 ...
# Adding location for the tag files is done as follows:
# TAGFILES = file1=loc1 "file2 = loc2" ...
# where loc1 and loc2 can be relative or absolute paths or URLs. See the
# section "Linking to external documentation" for more information about the use
# of tag files.
# Note: Each tag file must have a unique name (where the name does NOT include
# the path). If a tag file is not located in the directory in which doxygen is
# run, you must also specify the path to the tagfile here.

TAGFILES               =

# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
# tag file that is based on the input files it reads. See section "Linking to
# external documentation" for more information about the usage of tag files.

GENERATE_TAGFILE       =

# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
# the class index. If set to NO, only the inherited external classes will be
# listed.
# The default value is: NO.

ALLEXTERNALS           = NO

# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
# in the modules index. If set to NO, only the current project's groups will be
# listed.
# The default value is: YES.

EXTERNAL_GROUPS        = YES

# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
# the related pages index. If set to NO, only the current project's pages will
# be listed.
# The default value is: YES.

EXTERNAL_PAGES         = YES

#---------------------------------------------------------------------------
# Configuration options related to the dot tool
#---------------------------------------------------------------------------

# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
# NO turns the diagrams off. Note that this option also works with HAVE_DOT
# disabled, but it is recommended to install and use dot, since it yields more
# powerful graphs.
# The default value is: YES.

CLASS_DIAGRAMS         = NO

# You can include diagrams made with dia in doxygen documentation. Doxygen will
# then run dia to produce the diagram and insert it in the documentation. The
# DIA_PATH tag allows you to specify the directory where the dia binary resides.
# If left empty dia is assumed to be found in the default search path.

DIA_PATH               =

# If set to YES the inheritance and collaboration graphs will hide inheritance
# and usage relations if the target is undocumented or is not a class.
# The default value is: YES.

HIDE_UNDOC_RELATIONS   = NO

# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz (see:
# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
# Bell Labs. The other options in this section have no effect if this option is
# set to NO
# The default value is: YES.

HAVE_DOT               = YES

# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
# to run in parallel. When set to 0 doxygen will base this on the number of
# processors available in the system. You can set it explicitly to a value
# larger than 0 to get control over the balance between CPU load and processing
# speed.
# Minimum value: 0, maximum value: 32, default value: 0.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_NUM_THREADS        = 2

# When you want a differently looking font in the dot files that doxygen
# generates you can specify the font name using DOT_FONTNAME. You need to make
# sure dot is able to find the font, which can be done by putting it in a
# standard location or by setting the DOTFONTPATH environment variable or by
# setting DOT_FONTPATH to the directory containing the font.
# The default value is: Helvetica.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_FONTNAME           = Helvetica

# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
# dot graphs.
# Minimum value: 4, maximum value: 24, default value: 10.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_FONTSIZE           = 10

# By default doxygen will tell dot to use the default font as specified with
# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
# the path where dot can find it using this tag.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_FONTPATH           =

# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
# each documented class showing the direct and indirect inheritance relations.
# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

CLASS_GRAPH            = NO

# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
# graph for each documented class showing the direct and indirect implementation
# dependencies (inheritance, containment, and class references variables) of the
# class with other documented classes.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

COLLABORATION_GRAPH    = NO

# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
# groups, showing the direct groups dependencies.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

GROUP_GRAPHS           = NO

# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

UML_LOOK               = NO

# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
# class node. If there are many fields or methods and many nodes the graph may
# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
# number of items for each type to make the size more manageable. Set this to 0
# for no limit. Note that the threshold may be exceeded by 50% before the limit
# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
# but if the number exceeds 15, the total amount of fields shown is limited to
# 10.
# Minimum value: 0, maximum value: 100, default value: 10.
# This tag requires that the tag UML_LOOK is set to YES.

UML_LIMIT_NUM_FIELDS   = 10

# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
# methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS
# tag is set to YES, doxygen will add type and arguments for attributes and
# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
# will not generate fields with class member information in the UML graphs. The
# class diagrams will look similar to the default class diagrams but using UML
# notation for the relationships.
# Possible values are: NO, YES and NONE.
# The default value is: NO.
# This tag requires that the tag UML_LOOK is set to YES.

DOT_UML_DETAILS        = NO

# The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters
# to display on a single line. If the actual line length exceeds this threshold
# significantly it will wrapped across multiple lines. Some heuristics are apply
# to avoid ugly line breaks.
# Minimum value: 0, maximum value: 1000, default value: 17.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_WRAP_THRESHOLD     = 17

# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
# collaboration graphs will show the relations between templates and their
# instances.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

TEMPLATE_RELATIONS     = NO

# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
# YES then doxygen will generate a graph for each documented file showing the
# direct and indirect include dependencies of the file with other documented
# files.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

INCLUDE_GRAPH          = NO

# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
# set to YES then doxygen will generate a graph for each documented file showing
# the direct and indirect include dependencies of the file with other documented
# files.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

INCLUDED_BY_GRAPH      = NO

# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
# So in most cases it will be better to enable call graphs for selected
# functions only using the \callgraph command. Disabling a call graph can be
# accomplished by means of the command \hidecallgraph.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

CALL_GRAPH             = NO

# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
# dependency graph for every global function or class method.
#
# Note that enabling this option will significantly increase the time of a run.
# So in most cases it will be better to enable caller graphs for selected
# functions only using the \callergraph command. Disabling a caller graph can be
# accomplished by means of the command \hidecallergraph.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

CALLER_GRAPH           = NO

# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
# hierarchy of all classes instead of a textual one.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

GRAPHICAL_HIERARCHY    = YES

# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
# dependencies a directory has on other directories in a graphical way. The
# dependency relations are determined by the #include relations between the
# files in the directories.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

DIRECTORY_GRAPH        = YES

# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
# generated by dot. For an explanation of the image formats see the section
# output formats in the documentation of the dot tool (Graphviz (see:
# http://www.graphviz.org/)).
# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
# to make the SVG files visible in IE 9+ (other browsers do not have this
# requirement).
# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
# png:gdiplus:gdiplus.
# The default value is: png.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_IMAGE_FORMAT       = png

# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
# enable generation of interactive SVG images that allow zooming and panning.
#
# Note that this requires a modern browser other than Internet Explorer. Tested
# and working are Firefox, Chrome, Safari, and Opera.
# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
# the SVG files visible. Older versions of IE do not have SVG support.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

INTERACTIVE_SVG        = NO

# The DOT_PATH tag can be used to specify the path where the dot tool can be
# found. If left blank, it is assumed the dot tool can be found in the path.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_PATH               = /usr/bin

# The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the \dotfile
# command).
# This tag requires that the tag HAVE_DOT is set to YES.

DOTFILE_DIRS           =

# The MSCFILE_DIRS tag can be used to specify one or more directories that
# contain msc files that are included in the documentation (see the \mscfile
# command).

MSCFILE_DIRS           =

# The DIAFILE_DIRS tag can be used to specify one or more directories that
# contain dia files that are included in the documentation (see the \diafile
# command).

DIAFILE_DIRS           =

# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
# path where java can find the plantuml.jar file. If left blank, it is assumed
# PlantUML is not used or called during a preprocessing step. Doxygen will
# generate a warning when it encounters a \startuml command in this case and
# will not generate output for the diagram.

PLANTUML_JAR_PATH      =

# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
# configuration file for plantuml.

PLANTUML_CFG_FILE      =

# When using plantuml, the specified paths are searched for files specified by
# the !include statement in a plantuml block.

PLANTUML_INCLUDE_PATH  =

# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
# that will be shown in the graph. If the number of nodes in a graph becomes
# larger than this value, doxygen will truncate the graph, which is visualized
# by representing a node as a red box. Note that doxygen if the number of direct
# children of the root node in a graph is already larger than
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
# Minimum value: 0, maximum value: 10000, default value: 50.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_GRAPH_MAX_NODES    = 50

# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
# generated by dot. A depth value of 3 means that only nodes reachable from the
# root by following a path via at most 3 edges will be shown. Nodes that lay
# further from the root node will be omitted. Note that setting this option to 1
# or 2 may greatly reduce the computation time needed for large code bases. Also
# note that the size of a graph can be further restricted by
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
# Minimum value: 0, maximum value: 1000, default value: 0.
# This tag requires that the tag HAVE_DOT is set to YES.

MAX_DOT_GRAPH_DEPTH    = 0

# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
# background. This is disabled by default, because dot on Windows does not seem
# to support this out of the box.
#
# Warning: Depending on the platform used, enabling this option may lead to
# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
# read).
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_TRANSPARENT        = NO

# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
# files in one run (i.e. multiple -o and -T options on the command line). This
# makes dot run faster, but since only newer versions of dot (>1.8.10) support
# this, this feature is disabled by default.
# The default value is: NO.
# This tag requires that the tag HAVE_DOT is set to YES.

DOT_MULTI_TARGETS      = YES

# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
# explaining the meaning of the various boxes and arrows in the dot generated
# graphs.
# The default value is: YES.
# This tag requires that the tag HAVE_DOT is set to YES.

GENERATE_LEGEND        = YES

# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
# files that are used to generate the various graphs.
#
# Note: This setting is not only used for dot files but also for msc and
# plantuml temporary files.
# The default value is: YES.

DOT_CLEANUP            = YES