Commit 5651b907 authored by Francesco Mani's avatar Francesco Mani
Browse files

pusch config in mac gnb from rrc

parent d66aea3f
......@@ -1120,6 +1120,7 @@ typedef struct
uint16_t ul_dmrs_symb_pos;
uint8_t dmrs_config_type;
uint16_t ul_dmrs_scrambling_id;
uint16_t pusch_identity;
uint8_t scid;
uint8_t num_dmrs_cdm_grps_no_data;
uint16_t dmrs_ports;//DMRS ports. [TS38.212 7.3.1.1.2] provides description between DCI 0-1 content and DMRS ports. Bitmap occupying the 11 LSBs with: bit 0: antenna port 1000 bit 11: antenna port 1011 and for each bit 0: DMRS port not used 1: DMRS port used
......
......@@ -773,8 +773,8 @@ NR_UE_L2_STATE_t nr_ue_scheduler(nr_downlink_indication_t *dl_info, nr_uplink_in
uint16_t rnti = 0x1234;
uint32_t rb_size = 50;
uint32_t rb_start = 0;
uint8_t nr_of_symbols = 12;
uint8_t start_symbol_index = 2;
uint8_t nr_of_symbols = 11;
uint8_t start_symbol_index = 0;
uint8_t nrOfLayers = 1;
uint8_t mcs_index = 9;
uint8_t mcs_table = 0;
......
......@@ -825,6 +825,7 @@ void nr_schedule_uss_ulsch_phytest(int Mod_idP,
SLIV2SL(startSymbolAndLength,&StartSymbolIndex,&NrOfSymbols);
pusch_pdu->start_symbol_index = StartSymbolIndex;
pusch_pdu->nr_of_symbols = NrOfSymbols;
mapping_type = ubwp->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[time_domain_assignment]->mappingType;
if (ubwp->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[time_domain_assignment]->k2 != NULL)
K2 = *ubwp->bwp_Common->pusch_ConfigCommon->choice.setup->pusch_TimeDomainAllocationList->list.array[time_domain_assignment]->k2;
......@@ -848,8 +849,19 @@ void nr_schedule_uss_ulsch_phytest(int Mod_idP,
pusch_pdu->mcs_table = 0; //0: notqam256 [TS38.214, table 5.1.3.1-1] - corresponds to nr_target_code_rate_table1 in PHY
pusch_pdu->target_code_rate = nr_get_code_rate_ul(pusch_pdu->mcs_index,pusch_pdu->mcs_table) ;
pusch_pdu->qam_mod_order = nr_get_Qm_ul(pusch_pdu->mcs_index,pusch_pdu->mcs_table) ;
pusch_pdu->transform_precoding = 0;
pusch_pdu->data_scrambling_id = 0; //It equals the higher-layer parameter Data-scrambling-Identity if configured and the RNTI equals the C-RNTI, otherwise L2 needs to set it to physical cell id.;
if (pusch_Config->transformPrecoder == NULL) {
if (scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup->msg3_transformPrecoder == NULL)
pusch_pdu->transform_precoding = 1;
else
pusch_pdu->transform_precoding = 0;
}
else
pusch_pdu->transform_precoding = *pusch_Config->transformPrecoder;
if (pusch_Config->dataScramblingIdentityPUSCH != NULL)
pusch_pdu->data_scrambling_id = *pusch_Config->dataScramblingIdentityPUSCH;
else
pusch_pdu->data_scrambling_id = *scc->physCellId;
pusch_pdu->nrOfLayers = 1;
//Pusch Allocation in frequency domain [TS38.214, sec 6.1.2.2]
......@@ -862,51 +874,98 @@ void nr_schedule_uss_ulsch_phytest(int Mod_idP,
AssertFatal(1==0,"Only frequency resource allocation type 1 is currently supported\n");
pusch_pdu->vrb_to_prb_mapping = 0;
if (pusch_Config->frequencyHopping==NULL)
pusch_pdu->frequency_hopping = 0;
else
pusch_pdu->frequency_hopping = 1;
//pusch_pdu->tx_direct_current_location;//The uplink Tx Direct Current location for the carrier. Only values in the value range of this field between 0 and 3299, which indicate the subcarrier index within the carrier corresponding 1o the numerology of the corresponding uplink BWP and value 3300, which indicates "Outside the carrier" and value 3301, which indicates "Undetermined position within the carrier" are used. [TS38.331, UplinkTxDirectCurrentBWP IE]
pusch_pdu->uplink_frequency_shift_7p5khz = 0;
//pusch_pdu->uplink_frequency_shift_7p5khz = 0;
// --------------------
// ------- DMRS -------
// --------------------
uint16_t l_prime_mask = get_l_prime(pusch_pdu->nr_of_symbols, typeB, pusch_dmrs_pos0, pusch_len1);
pusch_pdu->ul_dmrs_symb_pos = l_prime_mask << pusch_pdu->start_symbol_index;
pusch_pdu->dmrs_config_type = 0; // dmrs-type 1 (the one with a single DMRS symbol in the beginning)
pusch_pdu->ul_dmrs_scrambling_id = 0; // If provided and the PUSCH is not a msg3 PUSCH, otherwise, L2 should set this to physical cell id
pusch_pdu->scid = 0; // DMRS sequence initialization [TS38.211, sec 6.4.1.1.1]
// Should match what is sent in DCI 0_1, otherwise set to 0
NR_DMRS_UplinkConfig_t *NR_DMRS_UplinkConfig;
if (mapping_type == NR_PUSCH_TimeDomainResourceAllocation__mappingType_typeA)
NR_DMRS_UplinkConfig = pusch_Config->dmrs_UplinkForPUSCH_MappingTypeA->choice.setup;
else
NR_DMRS_UplinkConfig = pusch_Config->dmrs_UplinkForPUSCH_MappingTypeB->choice.setup;
if (NR_DMRS_UplinkConfig->dmrs_Type == NULL)
pusch_pdu->dmrs_config_type = 0;
else
pusch_pdu->dmrs_config_type = 1;
pusch_pdu->scid = 0; // DMRS sequence initialization [TS38.211, sec 6.4.1.1.1]
if (pusch_pdu->transform_precoding) { // transform precoding disabled
long *scramblingid;
if (pusch_pdu->scid == 0)
scramblingid = NR_DMRS_UplinkConfig->transformPrecodingDisabled->scramblingID0;
else
scramblingid = NR_DMRS_UplinkConfig->transformPrecodingDisabled->scramblingID1;
if (scramblingid == NULL)
pusch_pdu->ul_dmrs_scrambling_id = *scc->physCellId;
else
pusch_pdu->ul_dmrs_scrambling_id = *scramblingid;
}
else {
pusch_pdu->ul_dmrs_scrambling_id = *scc->physCellId;
if (NR_DMRS_UplinkConfig->transformPrecodingEnabled->nPUSCH_Identity != NULL)
pusch_pdu->pusch_identity = *NR_DMRS_UplinkConfig->transformPrecodingEnabled->nPUSCH_Identity;
else
pusch_pdu->pusch_identity = *scc->physCellId;
}
pusch_dmrs_AdditionalPosition_t additional_pos;
if (NR_DMRS_UplinkConfig->dmrs_AdditionalPosition == NULL){printf("%d\n",2);
additional_pos = 2;}
else {
if (*NR_DMRS_UplinkConfig->dmrs_AdditionalPosition == NR_DMRS_UplinkConfig__dmrs_AdditionalPosition_pos3)
additional_pos = 3;
else
additional_pos = *NR_DMRS_UplinkConfig->dmrs_AdditionalPosition;
}
pusch_maxLength_t pusch_maxLength;
if (NR_DMRS_UplinkConfig->maxLength == NULL)
pusch_maxLength = 1;
else
pusch_maxLength = 2;
uint16_t l_prime_mask = get_l_prime(pusch_pdu->nr_of_symbols, mapping_type, additional_pos, pusch_maxLength);
pusch_pdu->ul_dmrs_symb_pos = l_prime_mask << pusch_pdu->start_symbol_index;
pusch_pdu->num_dmrs_cdm_grps_no_data = 1;
//pusch_pdu->dmrs_ports; // DMRS ports. [TS38.212 7.3.1.1.2] provides description between DCI 0-1 content and DMRS ports
// Bitmap occupying the 11 LSBs with: bit 0: antenna port 1000 bit 11: antenna port 1011,
// and for each bit 0: DMRS port not used 1: DMRS port used
pusch_pdu->dmrs_ports = 1;
// --------------------------------------------------------------------------------------------------------------------------------------------
// --------------------
// ------- PTRS -------
// --------------------
uint8_t ptrs_mcs1 = 2; // higher layer parameter in PTRS-UplinkConfig
uint8_t ptrs_mcs2 = 4; // higher layer parameter in PTRS-UplinkConfig
uint8_t ptrs_mcs3 = 10; // higher layer parameter in PTRS-UplinkConfig
uint16_t n_rb0 = 25; // higher layer parameter in PTRS-UplinkConfig
uint16_t n_rb1 = 75; // higher layer parameter in PTRS-UplinkConfig
pusch_pdu->pusch_ptrs.ptrs_time_density = get_L_ptrs(ptrs_mcs1, ptrs_mcs2, ptrs_mcs3, pusch_pdu->mcs_index, pusch_pdu->mcs_table);
pusch_pdu->pusch_ptrs.ptrs_freq_density = get_K_ptrs(n_rb0, n_rb1, pusch_pdu->rb_size);
pusch_pdu->pusch_ptrs.ptrs_ports_list = (nfapi_nr_ptrs_ports_t *) malloc(2*sizeof(nfapi_nr_ptrs_ports_t));
pusch_pdu->pusch_ptrs.ptrs_ports_list[0].ptrs_re_offset = 0;
if(1<<pusch_pdu->pusch_ptrs.ptrs_time_density >= pusch_pdu->nr_of_symbols)
pusch_pdu->pdu_bit_map &= ~PUSCH_PDU_BITMAP_PUSCH_PTRS; // disable PUSCH PTRS
if (NR_DMRS_UplinkConfig->phaseTrackingRS != NULL) {
// TODO to be fixed from RRC config
uint8_t ptrs_mcs1 = 2; // higher layer parameter in PTRS-UplinkConfig
uint8_t ptrs_mcs2 = 4; // higher layer parameter in PTRS-UplinkConfig
uint8_t ptrs_mcs3 = 10; // higher layer parameter in PTRS-UplinkConfig
uint16_t n_rb0 = 25; // higher layer parameter in PTRS-UplinkConfig
uint16_t n_rb1 = 75; // higher layer parameter in PTRS-UplinkConfig
pusch_pdu->pusch_ptrs.ptrs_time_density = get_L_ptrs(ptrs_mcs1, ptrs_mcs2, ptrs_mcs3, pusch_pdu->mcs_index, pusch_pdu->mcs_table);
pusch_pdu->pusch_ptrs.ptrs_freq_density = get_K_ptrs(n_rb0, n_rb1, pusch_pdu->rb_size);
pusch_pdu->pusch_ptrs.ptrs_ports_list = (nfapi_nr_ptrs_ports_t *) malloc(2*sizeof(nfapi_nr_ptrs_ports_t));
pusch_pdu->pusch_ptrs.ptrs_ports_list[0].ptrs_re_offset = 0;
pusch_pdu->pdu_bit_map &= PUSCH_PDU_BITMAP_PUSCH_PTRS; // enable PUSCH PTRS
}
else{
// if(1<<pusch_pdu->pusch_ptrs.ptrs_time_density >= pusch_pdu->nr_of_symbols)
pusch_pdu->pdu_bit_map &= ~PUSCH_PDU_BITMAP_PUSCH_PTRS; // disable PUSCH PTRS
}
// --------------------------------------------------------------------------------------------------------------------------------------------
//Pusch Allocation in frequency domain [TS38.214, sec 6.1.2.2]
//Optional Data only included if indicated in pduBitmap
// TODO from harq function as in pdsch
pusch_pdu->pusch_data.rv_index = 0;
pusch_pdu->pusch_data.harq_process_id = 0;
pusch_pdu->pusch_data.new_data_indicator = 0;
pusch_pdu->pusch_data.new_data_indicator = 1;
uint8_t num_dmrs_symb = 0;
......
......@@ -825,7 +825,8 @@ void fill_default_secondaryCellGroup(NR_ServingCellConfigCommon_t *servingcellco
pusch_Config->dmrs_UplinkForPUSCH_MappingTypeB->choice.setup = calloc(1,sizeof(*pusch_Config->dmrs_UplinkForPUSCH_MappingTypeB->choice.setup));
NR_DMRS_UplinkConfig_t *NR_DMRS_UplinkConfig = pusch_Config->dmrs_UplinkForPUSCH_MappingTypeB->choice.setup;
NR_DMRS_UplinkConfig->dmrs_Type = NULL;
NR_DMRS_UplinkConfig->dmrs_AdditionalPosition =NR_DMRS_UplinkConfig__dmrs_AdditionalPosition_pos0;
NR_DMRS_UplinkConfig->dmrs_AdditionalPosition = calloc(1,sizeof(*NR_DMRS_UplinkConfig->dmrs_AdditionalPosition));
*NR_DMRS_UplinkConfig->dmrs_AdditionalPosition = NR_DMRS_UplinkConfig__dmrs_AdditionalPosition_pos0;
NR_DMRS_UplinkConfig->phaseTrackingRS=NULL;
NR_DMRS_UplinkConfig->maxLength=NULL;
NR_DMRS_UplinkConfig->transformPrecodingDisabled = calloc(1,sizeof(*NR_DMRS_UplinkConfig->transformPrecodingDisabled));
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment