diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index d4377fc3243ebf50ffaf36bbd1b835245fdcce4a..d35de04b122bf77f1de6155557309cdba92413ff 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -32,3 +32,8 @@ job1:
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $EXTERNAL_SHARE_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$EXTERNAL_SHARE_DIR
- cat $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml
+ - exce_log=`egrep -i 'warning|error|critical|exception' $NFS_TEST_RESULTS_DIR/log/python_autotest.log `
+ - if [ -n "$exce_log" ]; then echo -e "\e[31mThere are errors in $NFS_TEST_RESULTS_DIR/log/python_autotest.log. Please check the logs\e[0m" ; fi
+ - exce_log=`egrep -i 'warning|error|critical|exception' $NFS_TEST_RESULTS_DIR/log/python_autotest_cleanup.log `
+ - if [ -n "$exce_log" ]; then echo -e "\e[31mThere are errors in $NFS_TEST_RESULTS_DIR/log/python_autotest_cleanup.log. Please check the logs\e[0m" ; fi
+
diff --git a/README.txt b/README.txt
index 2ff2e02190d5b2c628e793e5d2f0e7b19eedd4de..b549f8122f80144d30eabb07a10fbbbf18a6bc0f 100644
--- a/README.txt
+++ b/README.txt
@@ -1,19 +1,27 @@
-OpenAirInterface is under GNU GPLv3 license. The full GNU General Public License is included in this distribution in the file called "COPYING".
-
-The OpenAirInterface (OAI) software is composed of six different parts:
-
-openair1: 3GPP LTE Rel-8 PHY layer + PHY RF simulation
-
-openair2: 3GPP LTE Rel-9 RLC/MAC/PDCP/RRC implementations, eNB application, X2AP. Note that for RLC, the following versions are userL UM_v9.3.0, TM_v9.3.0, and AM_v9.3.0. For PDCP, PDCP_v10.1.0 is used. For RRC, only LITE is used.
-
-openair3: 3GPP LTE Rel9 and 10 MME/NAS, S+P-GW, HSS, S1AP (ENB and MME).
-
-common: some common OAI utilities, other tools can be found at openair2/UTILS
-
-targets: scripts to compile and lauch different system targets (simulation, emulation and real-time platforms, user-space tools for these platforms (tbd))
-
-see README files in these subdirectories for more information
-
-see also https://twiki.eurecom.fr/twiki/bin/view/OpenAirInterface/WebHome
-
-
+OpenAirInterface is under OpenAirInterface Software Alliance license.
+├── http://www.openairinterface.org/?page_id=101
+├── http://www.openairinterface.org/?page_id=698
+
+The OpenAirInterface (OAI) software is composed of the following parts:
+
+openairinterface5g
+├── cmake_targets: build utilities to compile (simulation, emulation and real-time platforms), and generated build files
+├── common : some common OAI utilities, other tools can be found at openair2/UTILS
+├── COPYING
+├── maketags : script to generate emacs tags
+├── openair1 : 3GPP LTE Rel-10 PHY layer + PHY RF simulation and a subset of Rel 12 Features.
+├── openair2 :3GPP LTE Rel-10 RLC/MAC/PDCP/RRC/X2AP implementation.
+ ├── LAYER2/RLC/ with the following subdirectories: UM_v9.3.0, TM_v9.3.0, and AM_v9.3.0.
+ ├── LAYER2/PDCP/PDCP_v10.1.0.
+ ├── RRC/LITE
+ ├── PHY_INTERFACE
+ ├── X2AP
+ ├── ENB_APP
+├── openair3: 3GPP LTE Rel10 for S1AP, NAS GTPV1-U for both ENB and UE.
+ ├── GTPV1-U
+ ├── NAS
+ ├── S1AP
+ ├── SCTP
+ ├── SECU
+ ├── UDP
+└── targets: top level wrapper for unitary simulation for PHY channels, system-level emulation (eNB-UE with and without S1), and realtime eNB and UE and RRH GW.
diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt
index 5eca2e8d41033e91800c6d931938b3a0246cc933..5f5f09dfab550c8f63b04d96a48f139f8c3fcc2b 100644
--- a/cmake_targets/CMakeLists.txt
+++ b/cmake_targets/CMakeLists.txt
@@ -260,6 +260,7 @@ endif (${ENABLE_ITTI})
add_boolean_option(RTAI False "Use RTAI")
+
#############################
# ASN.1 grammar C code generation & dependancies
################################
@@ -596,7 +597,7 @@ endif (${TRANSP_PRO} STREQUAL "ETHERNET")
include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
-Message("LOWLATENCY flag is ${LOWLATENCY}")
+Message("DEADLINE_SCHEDULER flag is ${DEADLINE_SCHEDULER}")
Message("CPU_Affinity flag is ${CPU_AFFINITY}")
##############################################################
@@ -610,7 +611,7 @@ add_boolean_option(RRC_DEFAULT_RAB_IS_AM False "set the RLC mode to AM for the d
add_boolean_option(OAI_NW_DRIVER_TYPE_ETHERNET False "????")
add_boolean_option(DISABLE_USE_NAS False "???")
-add_boolean_option(LOWLATENCY True "Use the Linux scheduler SCHED_DEADLINE: kernel >= 3.14")
+add_boolean_option(DEADLINE_SCHEDULER True "Use the Linux scheduler SCHED_DEADLINE: kernel >= 3.14")
add_boolean_option(CPU_AFFINITY False "Enable CPU Affinity of threads (only valid without deadline scheduler). It is enabled only with >2 CPUs")
add_boolean_option(NAS_ADDRESS_FIX False "specific to oaisim: for nasmesh driver")
add_boolean_option(NAS_NETLINK False "???? Must be True to compile nasmesh driver without rtai")
diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
index 159f1df41299882d6184dc533e351bfa4b0fca7a..77c3006fea9a54a16dab673d8bfa4fde9c365fe9 100755
--- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
+++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
@@ -29,10 +29,7 @@
# *******************************************************************************/
-# \file test01.py
-# \brief test 01 for OAI
-# \author Navid Nikaein
-# \date 2013 - 2015
+# \author Rohit Gupta
# \version 0.1
# @ingroup _test
@@ -316,12 +313,12 @@ def SSHSessionWrapper(machine, username, key_file, password, logdir_remote, logd
# \param CleanUpAluLteBox program to terminate AlU Bell Labs LTE Box
# \param ExmimoRfStop String to stop EXMIMO card (specified in test_case_list.xml)
def cleanOldPrograms(oai, programList, CleanUpAluLteBox, ExmimoRfStop):
- cmd = 'killall -q -r ' + programList
+ cmd = 'killall -9 -q -r ' + programList
result = oai.send(cmd, True)
print "Killing old programs..." + result
programArray = programList.split()
programListJoin = '|'.join(programArray)
- cmd = " ( date ;echo \"Starting cleaning old programs.. \" ; dmesg|tail )>& $HOME/.oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync"
+ cmd = " ( date ;echo \"Starting cleaning old programs.. \" ; dmesg|tail ; echo \"Current disk space.. \" ; df -h )>& $HOME/.oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync"
result=oai.send_recv(cmd)
cmd = cleanupOldProgramsScript + ' ' + '\''+programListJoin+'\''
#result = oai.send_recv(cmd)
@@ -330,7 +327,7 @@ def cleanOldPrograms(oai, programList, CleanUpAluLteBox, ExmimoRfStop):
print "Looking for old programs..." + result
res=oai.send_recv(CleanUpAluLteBox, True)
cmd = "( " + ExmimoRfStop + " ) >> $HOME/.oai_test_setup_cleanup.log.`hostname` ; sync "
- res=oai.send_recv(cmd, False)
+ res=oai.send_recv(cmd, False, timeout=600)
#res = oai.send_recv(ExmimoRfStop, False)
cmd = " ( date ;echo \"Finished cleaning old programs.. \" ; dmesg | tail)>> $HOME/.oai_test_setup_cleanup.log.`hostname` 2>&1 ; sync"
res=oai.send_recv(cmd)
@@ -1529,9 +1526,8 @@ for testcase in testcaseList:
print "Now copying files to NFS Share"
oai_localhost = openair('localdomain','localhost')
oai_localhost.connect(user,pw)
- cmd = ' rm -fr ' + NFSTestsResultsDir + ' ; mkdir -p ' + NFSTestsResultsDir
+ cmd = ' mkdir -p ' + NFSTestsResultsDir
res = oai_localhost.send_recv(cmd)
- print "Deleting NFSTestResults Dir..." + res
print "Copying files from GilabCI Runner Machine : " + host + " .locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir
SSHSessionWrapper('localhost', user, None, pw , NFSTestsResultsDir , locallogdir, "put_all")
@@ -1568,12 +1564,15 @@ res=os.system(cmd)
print "Now copying files to NFS Share"
oai_localhost = openair('localdomain','localhost')
oai_localhost.connect(user,pw)
-cmd = ' rm -fr ' + NFSTestsResultsDir + ' ; mkdir -p ' + NFSTestsResultsDir
+cmd = 'mkdir -p ' + NFSTestsResultsDir
res = oai_localhost.send_recv(cmd)
-print "Deleting NFSTestResults Dir..." + res
print "Copying files from GilabCI Runner Machine : " + host + " .locallogdir = " + locallogdir + ", NFSTestsResultsDir = " + NFSTestsResultsDir
SSHSessionWrapper('localhost', user, None, pw , NFSTestsResultsDir , locallogdir, "put_all")
+
+cmd = "cat " + NFSTestsResultsDir + "/log/*/*.xml > " + NFSTestsResultsDir + "/log/results_autotests.xml"
+res = oai_localhost.send_recv(cmd)
+
oai_localhost.disconnect()
sys.exit()
diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml
index 80a54947b82531ffae7964507955ff4883aaa2be..0104e912f969a2978a1e8a7aa9f13fc4a74ad381 100644
--- a/cmake_targets/autotests/test_case_list.xml
+++ b/cmake_targets/autotests/test_case_list.xml
@@ -6,11 +6,11 @@
<GitOpenair-cnRepo>https://gitlab.eurecom.fr/oai/openair-cn.git</GitOpenair-cnRepo>
<GitOAI5GRepoBranch>develop</GitOAI5GRepoBranch>
<GitOpenair-cnRepoBranch>develop</GitOpenair-cnRepoBranch>
- <CleanUpOldProgs>oaisim* oaisim_nos1* lte-softmodem* lte-softmodem-nos1* mme_gw* run_epc* run_hss* hss hss_sim configure_cots* wvdial* iperf iperf_script ping tshark rrh_gw</CleanUpOldProgs>
+ <CleanUpOldProgs>oaisim oaisim_nos1 lte-softmodem lte-softmodem-nos1 mme_gw run_epc auth_request run_hss oai_hss mme spgw hss hss_sim configure_cots* wvdial iperf iperf_script iperf_script_phone ping tshark rrh_gw iperf3 iperf3_script iperf3_script_phone</CleanUpOldProgs>
<CleanUpAluLteBox>sudo -S -E /opt/ltebox/tools/stop_ltebox</CleanUpAluLteBox>
-<ExmimoRfStop>$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --stop-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg|tail</ExmimoRfStop>
+<ExmimoRfStop>$OPENAIR_DIR/cmake_targets/build_oai -w EXMIMO -c; sudo -S -E $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py --reset-ue; sudo -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue; uname -a; sudo -E dmesg</ExmimoRfStop>
<Timeout_execution>36000</Timeout_execution>
- <TestCaseExclusionList>0102+ 010304 010305 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025502 025505</TestCaseExclusionList>
+ <TestCaseExclusionList>010141 0102+ 010304 010305 0104+ 015502 015505 015506 015507 015508 015509 015510 015511 015602 015605 015702 015705 015802 015805 016102 016105 016502 016505 017002 017005 017502 017505 018002 018005 018502 018505 025502 025505</TestCaseExclusionList>
<nruns_lte-softmodem>3</nruns_lte-softmodem>
<MachineListGeneric>mozart calisson stevens nano amerique</MachineListGeneric>
<testCase id="010101" >
@@ -879,29 +879,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -916,7 +916,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -936,7 +936,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -954,29 +954,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -991,7 +991,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -1011,7 +1011,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1028,29 +1028,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1085,7 +1085,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1102,29 +1102,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1139,7 +1139,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
@@ -1159,7 +1159,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1175,29 +1175,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1211,7 +1211,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 30M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -1232,7 +1232,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1248,29 +1248,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1306,7 +1306,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1323,29 +1323,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1380,7 +1380,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo iperf -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1398,29 +1398,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1454,7 +1454,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1471,29 +1471,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1528,7 +1528,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1545,29 +1545,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1603,7 +1603,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1619,29 +1619,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1677,7 +1677,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1693,29 +1693,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 2
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 2
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1751,7 +1751,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1806,12 +1806,12 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -1835,7 +1835,7 @@
<EPC_main_exec_args> -i -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1890,12 +1890,12 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -1919,7 +1919,7 @@
<EPC_main_exec_args> -i -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -1979,7 +1979,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -2003,7 +2003,7 @@
<EPC_main_exec_args> -i -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2063,7 +2063,7 @@
<UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -2087,7 +2087,7 @@
<EPC_main_exec_args> -i -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2147,7 +2147,7 @@
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -2171,7 +2171,7 @@
<EPC_main_exec_args> -i -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2231,7 +2231,7 @@
<UE_search_expr_true>throughput_test min=40.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -2255,7 +2255,7 @@
<EPC_main_exec_args> -i -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2272,30 +2272,30 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -26
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -26
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2310,37 +2310,46 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
- <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
- BUILD/EPC/epc.conf.in MNC \"92\"
- BUILD/EPC/epc.conf.in TAC \"1\"
- BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
- BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
- BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
- BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
- BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"
- BUILD/EPC/epc.conf.in OUTPUT \"CONSOLE\"</EPC_config_file>
- <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
- <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
- <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
- <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>
-
+ <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
+ ETC/hss.conf MYSQL_pass \"linux\"
+ ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
+ ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S11_MME \"lo\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME \"127.0.11.1/8\"
+ ETC/mme.conf MME_PORT_FOR_S11_MME 2123
+ ETC/mme.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/mme.conf OUTPUT \"CONSOLE\"
+ ETC/mme.conf HSS_HOSTNAME \"hss\"
+ ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
+ ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
+ ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11 \"lo\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"
+ ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP 2152
+ ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
+ ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
+ <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
+ <EPC_compile_prog_args></EPC_compile_prog_args>
+ <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
+ <HSS_compile_prog_args></HSS_compile_prog_args>
+c
<EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
- <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
- <EPC_main_exec_args> -r </EPC_main_exec_args>
- <HSS_main_exec>sleep 10; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
+ <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc </EPC_main_exec>
+ <EPC_main_exec_args> </EPC_main_exec_args>
+ <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2357,30 +2366,30 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2395,36 +2404,46 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
- <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
- BUILD/EPC/epc.conf.in MNC \"92\"
- BUILD/EPC/epc.conf.in TAC \"1\"
- BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
- BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
- BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
- BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
- BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
- <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
- <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
- <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
- <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>
-
- <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
+ <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
+ ETC/hss.conf MYSQL_pass \"linux\"
+ ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
+ ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S11_MME \"lo\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME \"127.0.11.1/8\"
+ ETC/mme.conf MME_PORT_FOR_S11_MME 2123
+ ETC/mme.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/mme.conf OUTPUT \"CONSOLE\"
+ ETC/mme.conf HSS_HOSTNAME \"hss\"
+ ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
+ ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
+ ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11 \"lo\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"
+ ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP 2152
+ ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
+ ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
+ <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
+ <EPC_compile_prog_args></EPC_compile_prog_args>
+ <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
+ <HSS_compile_prog_args></HSS_compile_prog_args>
+c
+ <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
- <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
- <EPC_main_exec_args> -r </EPC_main_exec_args>
- <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
+ <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc </EPC_main_exec>
+ <EPC_main_exec_args> </EPC_main_exec_args>
+ <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2441,30 +2460,30 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2484,31 +2503,41 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
- <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
- BUILD/EPC/epc.conf.in MNC \"92\"
- BUILD/EPC/epc.conf.in TAC \"1\"
- BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
- BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
- BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
- BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
- BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
- <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
- <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
- <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
- <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>
-
- <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
+ <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
+ ETC/hss.conf MYSQL_pass \"linux\"
+ ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
+ ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S11_MME \"lo\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME \"127.0.11.1/8\"
+ ETC/mme.conf MME_PORT_FOR_S11_MME 2123
+ ETC/mme.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/mme.conf OUTPUT \"CONSOLE\"
+ ETC/mme.conf HSS_HOSTNAME \"hss\"
+ ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
+ ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
+ ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11 \"lo\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"
+ ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP 2152
+ ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
+ ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
+ <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
+ <EPC_compile_prog_args></EPC_compile_prog_args>
+ <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
+ <HSS_compile_prog_args></HSS_compile_prog_args>
+c
+ <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
- <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
- <EPC_main_exec_args> -r </EPC_main_exec_args>
- <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
+ <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc </EPC_main_exec>
+ <EPC_main_exec_args> </EPC_main_exec_args>
+ <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2525,30 +2554,30 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -26
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -26
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2563,36 +2592,46 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=9.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
- <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
- BUILD/EPC/epc.conf.in MNC \"92\"
- BUILD/EPC/epc.conf.in TAC \"1\"
- BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
- BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
- BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
- BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
- BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
- <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
- <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
- <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
- <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>
-
- <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
+ <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
+ ETC/hss.conf MYSQL_pass \"linux\"
+ ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
+ ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S11_MME \"lo\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME \"127.0.11.1/8\"
+ ETC/mme.conf MME_PORT_FOR_S11_MME 2123
+ ETC/mme.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/mme.conf OUTPUT \"CONSOLE\"
+ ETC/mme.conf HSS_HOSTNAME \"hss\"
+ ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
+ ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
+ ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11 \"lo\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"
+ ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP 2152
+ ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
+ ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
+ <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
+ <EPC_compile_prog_args></EPC_compile_prog_args>
+ <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
+ <HSS_compile_prog_args></HSS_compile_prog_args>
+c
+ <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
- <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
- <EPC_main_exec_args> -r </EPC_main_exec_args>
- <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
+ <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc </EPC_main_exec>
+ <EPC_main_exec_args> </EPC_main_exec_args>
+ <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2609,30 +2648,30 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2647,36 +2686,46 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=9Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
- <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
- BUILD/EPC/epc.conf.in MNC \"92\"
- BUILD/EPC/epc.conf.in TAC \"1\"
- BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
- BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
- BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
- BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
- BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
- <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
- <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
- <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
- <HSS_compile_prog_args> -c -l --debug --random false</HSS_compile_prog_args>
-
- <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_pre_exec>
+ <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
+ ETC/hss.conf MYSQL_pass \"linux\"
+ ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
+ ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S11_MME \"lo\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME \"127.0.11.1/8\"
+ ETC/mme.conf MME_PORT_FOR_S11_MME 2123
+ ETC/mme.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/mme.conf OUTPUT \"CONSOLE\"
+ ETC/mme.conf HSS_HOSTNAME \"hss\"
+ ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
+ ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
+ ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11 \"lo\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"
+ ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP 2152
+ ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
+ ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
+ <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
+ <EPC_compile_prog_args></EPC_compile_prog_args>
+ <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
+ <HSS_compile_prog_args></HSS_compile_prog_args>
+c
+ <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
- <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
- <EPC_main_exec_args> -r </EPC_main_exec_args>
- <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
+ <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc </EPC_main_exec>
+ <EPC_main_exec_args> </EPC_main_exec_args>
+ <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2693,30 +2742,30 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf pdsch_referenceSignalPower -29
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf pdsch_referenceSignalPower -29
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -c</eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2731,36 +2780,46 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 9M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=9Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
- <EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
- BUILD/EPC/epc.conf.in MNC \"92\"
- BUILD/EPC/epc.conf.in TAC \"1\"
- BUILD/EPC/epc.conf.in MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
- BUILD/EPC/epc.conf.in MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP \"eth0\";
- BUILD/EPC/epc.conf.in SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\";
- BUILD/EPC/epc.conf.in PGW_INTERFACE_NAME_FOR_SGI \"eth0\"
- BUILD/EPC/epc.conf.in PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
- BUILD/EPC/epc.conf.in IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\"</EPC_config_file>
- <EPC_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_epc</EPC_compile_prog>
- <EPC_compile_prog_args>-c -l</EPC_compile_prog_args>
- <HSS_compile_prog>$OPENAIRCN_DIR/SCRIPTS/build_hss</HSS_compile_prog>
- <HSS_compile_prog_args> -c -l --debug --random false </HSS_compile_prog_args>
-
- <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0 add 192.172.0.1 ;cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in </EPC_pre_exec>
+ <EPC_config_file>ETC/hss.conf MYSQL_user \"root\"
+ ETC/hss.conf MYSQL_pass \"linux\"
+ ETC/mme.conf GUMMEI_LIST "{MCC=\"208\";MNC=\"92\";MME_GID=\"4\";MME_CODE=\"1\";}"
+ ETC/mme.conf TAI_LIST "{MCC=\"208\";MNC=\"92\";TAC=\"1\";}"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S1_MME \"eth0\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.62/24\"
+ ETC/mme.conf MME_INTERFACE_NAME_FOR_S11_MME \"lo\"
+ ETC/mme.conf MME_IPV4_ADDRESS_FOR_S11_MME \"127.0.11.1/8\"
+ ETC/mme.conf MME_PORT_FOR_S11_MME 2123
+ ETC/mme.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/mme.conf OUTPUT \"CONSOLE\"
+ ETC/mme.conf HSS_HOSTNAME \"hss\"
+ ETC/mme_fd.conf Identity \"nano.openair4G.eur\"
+ ETC/hss_fd.conf Identity \"hss.openair4G.eur\"
+ ETC/spgw.conf SGW_INTERFACE_NAME_FOR_S11 \"lo\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S11 \"127.0.11.2/8\"
+ ETC/spgw.conf SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP \"192.168.12.62/24\"
+ ETC/spgw.conf SGW_IPV4_PORT_FOR_S1U_S12_S4_UP 2152
+ ETC/spgw.conf PGW_IPV4_ADDRESS_FOR_SGI \"192.168.12.62/24\"
+ ETC/spgw.conf IPV4_LIST \"192.172.0.0/24\",\"192.172.1.0/24\" </EPC_config_file>
+ <EPC_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiameter; sudo cp -vf $OPENAIRCN_DIR/ETC/mme.conf /usr/local/etc/oai/ ; sudo cp -vf $OPENAIRCN_DIR/ETC/mme_fd.conf /usr/local/etc/oai/freeDiameter; sudo cp $OPENAIRCN_DIR/ETC/spgw.conf /usr/local/etc/oai -vf; $OPENAIRCN_DIR/SCRIPTS/./check_mme_s6a_certificate /usr/local/etc/oai/freeDiameter/ nano.openair4G.eur ; $OPENAIRCN_DIR/SCRIPTS/build_mme -c ; $OPENAIRCN_DIR/SCRIPTS/build_spgw -c </EPC_compile_prog>
+ <EPC_compile_prog_args></EPC_compile_prog_args>
+ <HSS_compile_prog>sudo mkdir -p /usr/local/etc/oai/freeDiamter; sudo cp -vf $OPENAIRCN_DIR/ETC/hss.conf /usr/local/etc/oai ; sudo cp -vf $OPENAIRCN_DIR/ETC/hss_fd.conf /usr/local/etc/oai/freeDiameter ; $OPENAIRCN_DIR/SCRIPTS/check_hss_s6a_certificate /usr/local/etc/oai/freeDiameter/ hss.openair4G.eur; $OPENAIRCN_DIR/SCRIPTS/build_hss -c </HSS_compile_prog>
+ <HSS_compile_prog_args></HSS_compile_prog_args>
+c
+ <EPC_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth0 add 192.172.0.1</EPC_pre_exec>
<EPC_pre_exec_args></EPC_pre_exec_args>
- <EPC_main_exec>$OPENAIRCN_DIR/SCRIPTS/run_epc </EPC_main_exec>
- <EPC_main_exec_args> -r </EPC_main_exec_args>
- <HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
+ <EPC_main_exec>sleep 10;$OPENAIRCN_DIR/TEST/autotests/tools/run_epc </EPC_main_exec>
+ <EPC_main_exec_args> </EPC_main_exec_args>
+ <HSS_main_exec>cp -vf $OPENAIRCN_DIR/ETC/*.conf $OPENAIRCN_TESTDIR/; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2778,27 +2837,27 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2812,7 +2871,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -2832,7 +2891,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2850,27 +2909,27 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2884,7 +2943,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -2904,7 +2963,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2921,27 +2980,27 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2976,7 +3035,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -2993,27 +3052,27 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3028,7 +3087,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
@@ -3048,7 +3107,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -3064,27 +3123,27 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3099,7 +3158,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 20M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
@@ -3119,7 +3178,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -3135,27 +3194,27 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3190,7 +3249,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -3209,27 +3268,27 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3249,7 +3308,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -3273,7 +3332,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3292,27 +3351,27 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3332,7 +3391,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -3356,7 +3415,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3373,27 +3432,27 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3413,7 +3472,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -3437,7 +3496,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3454,27 +3513,27 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3494,7 +3553,7 @@
<UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -3518,7 +3577,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3535,27 +3594,27 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3575,7 +3634,7 @@
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -3599,7 +3658,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3616,27 +3675,27 @@
<EPC>nano</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf mme_ip_address "ipv4=\"192.168.12.62\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_INTERFACE_NAME_FOR_S1U \"eth6\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.111/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.100PRB.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3656,7 +3715,7 @@
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -3680,7 +3739,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3714,7 +3773,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail </eNB_pre_exec>
+ <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -3731,7 +3790,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3751,7 +3810,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3786,7 +3845,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
+ <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -3804,7 +3863,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -3824,7 +3883,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3858,7 +3917,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
+ <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -3896,7 +3955,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -3930,7 +3989,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
+ <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -3948,7 +4007,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
@@ -3968,7 +4027,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -4001,7 +4060,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
+ <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4019,7 +4078,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 20M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
@@ -4039,7 +4098,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -4072,7 +4131,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail</eNB_pre_exec>
+ <eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4110,7 +4169,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -4145,7 +4204,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
+ <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4169,7 +4228,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -4193,7 +4252,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4229,7 +4288,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4252,7 +4311,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -4276,7 +4335,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4310,7 +4369,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4333,7 +4392,7 @@
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -4357,7 +4416,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4391,7 +4450,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4414,7 +4473,7 @@
<UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -4438,7 +4497,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4472,7 +4531,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4495,7 +4554,7 @@
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -4519,7 +4578,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4553,7 +4612,7 @@
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w EXMIMO -x -c </eNB_compile_prog_args>
- <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/init_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
+ <eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
<eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
@@ -4576,7 +4635,7 @@
<UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
- <UE_stop_script>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
+ <UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue </UE_stop_script>
<EPC_working_dir>/tmp</EPC_working_dir>
<EPC_config_file>BUILD/EPC/epc.conf.in MCC \"208\"
@@ -4600,7 +4659,7 @@
<EPC_main_exec_args> -r </EPC_main_exec_args>
<HSS_main_exec>sleep 10; $OPENAIRCN_DIR/SCRIPTS/run_hss --export-db $OPENAIRCN_TESTDIR/hss_export.db </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s ; cp $OPENAIRCN_DIR/BUILD/EPC/epc.conf.in $OPENAIRCN_TESTDIR/epc.conf.in</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true></EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4676,7 +4735,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4752,7 +4811,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4827,7 +4886,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -4902,7 +4961,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -4976,7 +5035,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -5051,7 +5110,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -5125,7 +5184,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -5201,7 +5260,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -5276,7 +5335,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -5351,7 +5410,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -5425,7 +5484,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -5500,7 +5559,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -5586,7 +5645,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -5672,7 +5731,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -5757,7 +5816,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -5842,7 +5901,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -5926,7 +5985,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -6011,7 +6070,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -6028,29 +6087,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6065,7 +6124,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 7Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6085,9 +6144,9 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=5.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -6103,29 +6162,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6140,7 +6199,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 10Mbits/s -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -c 192.172.0.1 -b 14Mbits/s -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true></UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6160,9 +6219,9 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -6177,29 +6236,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6234,7 +6293,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
@@ -6251,29 +6310,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 25
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 25
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6288,7 +6347,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -u -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6309,7 +6368,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 10Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 10Mbits/s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -6325,29 +6384,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 50
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 50
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6362,7 +6421,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6383,7 +6442,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 20Mbits/s -i 1 -f m -u </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -6399,29 +6458,29 @@
<EPC>amerique</EPC>
<TimeOut_cmd>390</TimeOut_cmd>
<eNB_working_dir>/tmp</eNB_working_dir>
- <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tracking_area_code \"1\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_country_code \"208\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mobile_network_code \"92\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf N_RB_DL 100
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf downlink_frequency 2660000000L
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf uplink_frequency_offset -120000000
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf tx_gain 90
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf rx_gain 125
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf frame_type \"FDD\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_rx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf nb_antennas_tx 1
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
- targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
+ <eNB_config_file>targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tracking_area_code \"1\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_country_code \"208\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mobile_network_code \"92\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf N_RB_DL 100
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf mme_ip_address "ipv4=\"192.168.12.26\";ipv6=\"192:168:30::17\";active=\"yes\";preference=\"ipv4\";"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf downlink_frequency 2660000000L
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf uplink_frequency_offset -120000000
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf tx_gain 90
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf rx_gain 125
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf frame_type \"FDD\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_rx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf nb_antennas_tx 1
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1_MME \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1_MME \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_INTERFACE_NAME_FOR_S1U \"eth5\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_IPV4_ADDRESS_FOR_S1U \"192.168.12.82/24\"
+ targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf ENB_PORT_FOR_S1U 2152</eNB_config_file>
<eNB_compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</eNB_compile_prog>
<eNB_compile_prog_args>--eNB -w USRP -x -c </eNB_compile_prog_args>
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6436,7 +6495,7 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>sleep 50; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue ; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
@@ -6457,7 +6516,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 60 lo -u -c 192.172.0.2 -b 15Mbits/s -B 192.172.0.1</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 40Mbits/s -i 1 -f m -u </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
diff --git a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
index 3921afd8f25f0f41badb5ce9f2c040fab866b7d6..768b88aa289038d7c97e912a3e4fa806d078df31 100755
--- a/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
@@ -141,6 +141,7 @@ def send_command (cmd, response, timeout):
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
+ time.sleep(1)
def start_ue () :
@@ -200,10 +201,12 @@ def reset_ue():
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print "Bandrich 4G LTE Adapter found in..." + usb_dir
+ print "Sleeping now for 45 seconds...please wait..."
cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 15" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 30" )
+ stop_ue()
i=1
gw='192.172.0.1'
@@ -218,6 +221,7 @@ while i < len(sys.argv):
print 'Using Serial port : ' + serial_port
stop_ue()
elif arg == '--reset-ue' :
+ find_open_port()
reset_ue()
elif arg == '-gw' :
gw = sys.argv[i+1]
diff --git a/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py b/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
index b173d6157c002c9b76cb66c5e490162c6210a0de..929cc1c0a5246e0db485bb077878ed108aafcd49 100755
--- a/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py
@@ -143,6 +143,7 @@ def send_command (cmd, response, timeout):
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
+ time.sleep(1)
def start_ue () :
@@ -211,6 +212,7 @@ def reset_ue():
os.system(cmd + " ; sleep 15" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 30" )
+ stop_ue()
i=1
gw='192.172.0.1'
@@ -225,6 +227,7 @@ while i < len(sys.argv):
print 'Using Serial port : ' + serial_port
stop_ue()
elif arg == '--reset-ue' :
+ find_open_port()
reset_ue()
elif arg == '-gw' :
gw = sys.argv[i+1]
diff --git a/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py b/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
index eba3156976544cea776a3b001b0b8dcb3d3f45cc..c136067a61525b591c487ef00f72392f18d895a1 100755
--- a/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
+++ b/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py
@@ -43,7 +43,8 @@ def kill_processes(name):
cmd = 'sudo adb -s ' + device_id +' shell "ps |grep ' + name + '"'
status, out = commands.getstatusoutput(cmd)
if status != 0:
- print "Error execting command to kill process " + name
+ print "Error executing command to kill process " + name
+ print "Error =" + out
sys.exit(1)
print "Out = " + out
if out=='':
@@ -51,7 +52,7 @@ def kill_processes(name):
out_arr = out.split()
pid_to_kill = out_arr[1]
print "Now killing process ID " + pid_to_kill + " on Phone"
- cmd = 'sudo adb -s ' + device_id +' shell "kill ' + pid_to_kill + '"'
+ cmd = 'sudo adb -s ' + device_id +' shell "kill -9 ' + pid_to_kill + '"'
status, out = commands.getstatusoutput(cmd)
if status != 0:
print "Error execting command to kill process " + name
@@ -62,6 +63,7 @@ def start_ue () :
#print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
print 'Killing old iperf/ping sessions'
kill_processes('iperf')
+ kill_processes('iperf3')
kill_processes('ping')
print "Turning off airplane mode"
os.system('sudo -E adb devices')
@@ -93,6 +95,7 @@ def stop_ue():
os.system('sudo adb -s ' + device_id + ' shell \"settings put global airplane_mode_on 1; am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true\" ')
print "Killing iperf/ping sessions"
kill_processes('iperf')
+ kill_processes('iperf3')
kill_processes('ping')
i=1
diff --git a/cmake_targets/autotests/tools/iperf3_script b/cmake_targets/autotests/tools/iperf3_script
new file mode 100755
index 0000000000000000000000000000000000000000..e82816f6e140a3981536a13c7dd3ae23d6f3dc9f
--- /dev/null
+++ b/cmake_targets/autotests/tools/iperf3_script
@@ -0,0 +1,52 @@
+#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see <http://www.gnu.org/licenses/>.
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
+#arg1 timeout to wait before running the script
+#arg2 interface
+#arg3 iperf arguments
+
+args=($*)
+timeout=${args[0]}
+iface=${args[1]}
+iperf3_args=(${args[@]:2})
+
+#array=${1:-1}
+echo "args = ${args[@]}"
+echo "timeout = $timeout"
+echo "iface = $iface"
+echo "iperf3_args = ${iperf3_args[@]}"
+
+sleep $timeout
+
+while true; do var=`ifconfig $iface` ;sleep 1; if [ "$var" != "" ]; then break; fi ; done ; sleep 5
+
+iperf3 ${iperf3_args[@]}
diff --git a/cmake_targets/autotests/tools/iperf3_script_phone b/cmake_targets/autotests/tools/iperf3_script_phone
new file mode 100755
index 0000000000000000000000000000000000000000..c191f72ec3ce20d5a582ec3cb4bfc30ff184bf1b
--- /dev/null
+++ b/cmake_targets/autotests/tools/iperf3_script_phone
@@ -0,0 +1,63 @@
+#!/bin/bash
+#******************************************************************************
+
+# OpenAirInterface
+# Copyright(c) 1999 - 2014 Eurecom
+
+# OpenAirInterface is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+
+# OpenAirInterface is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with OpenAirInterface.The full GNU General Public License is
+# included in this distribution in the file called "COPYING". If not,
+# see <http://www.gnu.org/licenses/>.
+
+# Contact Information
+# OpenAirInterface Admin: openair_admin@eurecom.fr
+# OpenAirInterface Tech : openair_tech@eurecom.fr
+# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
+
+# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
+
+# *******************************************************************************/
+# \author Navid Nikaein, Rohit Gupta
+
+#arg1 timeout to wait before running the script
+#arg2 interface
+#arg3 iperf3 arguments
+
+args=($*)
+timeout=${args[0]}
+device_id=${args[1]}
+iperf3_args=(${args[@]:2})
+
+#array=${1:-1}
+echo "args = ${args[@]}"
+echo "timeout = $timeout"
+echo "device_id = $device_id"
+echo "iperf3_args = ${iperf3_args[@]}"
+
+sleep $timeout
+
+while true ; do
+ cmd=`sudo adb -s $device_id shell netcfg |grep 192.`
+ if [ -z "$cmd" ]; then
+ echo "Wating for UE to connect and get IP Address..."
+ sleep 1
+ else
+ echo "UE is now connected. IP Address settings are... $cmd"
+ break
+ fi
+done
+
+echo "Starting iperf3 now..."
+
+sudo adb -s $device_id shell /data/local/tmp/iperf3 ${iperf3_args[@]}
diff --git a/cmake_targets/autotests/tools/search_repl.py b/cmake_targets/autotests/tools/search_repl.py
index e43feccfb373a088b8a8f5f11098be6adcac0f06..fefc142f087e00a71a6ff5e67b28953a81abb01f 100755
--- a/cmake_targets/autotests/tools/search_repl.py
+++ b/cmake_targets/autotests/tools/search_repl.py
@@ -54,9 +54,9 @@ file.close()
if keyword == 'mme_ip_address':
replacement_text = keyword + ' = ( { ' + replacement_text + ' } ) ; '
string = re.sub(r"mme_ip_address\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
-elif keyword == 'IPV4_LIST':
+elif keyword == 'IPV4_LIST' or keyword=='GUMMEI_LIST' or keyword == 'TAI_LIST':
replacement_text = keyword + ' = ( ' + replacement_text + ' ) ; '
- string = re.sub(r"IPV4_LIST\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
+ string = re.sub(r"%s\s*=\s*\(([^\$]+?)\)\s*;" % keyword, replacement_text, string, re.M)
elif keyword == 'rrh_gw_config':
replacement_text = keyword + ' = ( { ' + replacement_text + ' } ) ; '
string = re.sub(r"rrh_gw_config\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai
index 3a3e8bbec357beb5d8570a72e213826394b0ea76..96adfa004099a85db33d7be6a9b967dabb362a72 100755
--- a/cmake_targets/build_oai
+++ b/cmake_targets/build_oai
@@ -45,8 +45,8 @@ MSC_GEN="False"
XFORMS="True"
PRINT_STATS="False"
VCD_TIMING="False"
-LOWLATENCY_FLAG_USER="False"
-FORCE_LOWLATENCY_FLAG_USER=""
+DEADLINE_SCHEDULER_FLAG_USER="False"
+FORCE_DEADLINE_SCHEDULER_FLAG_USER=""
CPU_AFFINITY_FLAG_USER="True" #Only valid when lowlatecy flag is set to False
REL="Rel10"
HW="None"
@@ -125,7 +125,7 @@ Options
--disable-deadline
Disables deadline scheduler of Linux kernel (>=3.14.x).
--enable-deadline
- Disables deadline scheduler of Linux kernel (>=3.14.x).
+ Enable deadline scheduler of Linux kernel (>=3.14.x).
--disable-cpu-affinity
Disables CPU Affinity between UHD/TX/RX Threads (Valid only when deadline scheduler is disabled). By defaulT, CPU Affinity is enabled when not using deadline scheduler. It is enabled only with >2 CPUs. For eNB, CPU_0-> Device library (UHD), CPU_1->TX Threads, CPU_2...CPU_MAX->Rx Threads. For UE, CPU_0->Device Library(UHD), CPU_1..CPU_MAX -> All the UE threads
Usage (first build):
@@ -259,11 +259,11 @@ function main() {
echo_info "Will build doxygen support"
shift;;
--disable-deadline)
- FORCE_LOWLATENCY_FLAG_USER="False"
+ FORCE_DEADLINE_SCHEDULER_FLAG_USER="False"
echo_info "Disabling the usage of deadline scheduler"
shift 1;;
--enable-deadline)
- FORCE_LOWLATENCY_FLAG_USER="True"
+ FORCE_DEADLINE_SCHEDULER_FLAG_USER="True"
echo_info "Enabling the usage of deadline scheduler"
shift 1;;
--disable-cpu-affinity)
@@ -314,33 +314,33 @@ function main() {
#By default: USRP: disable,
#By default: BLADERF: enable,
#By default: EXMIMO: enable
- if [ "$FORCE_LOWLATENCY_FLAG_USER" = "" ]; then
+ if [ "$FORCE_DEADLINE_SCHEDULER_FLAG_USER" = "" ]; then
if [ "$HW" = "EXMIMO" ] ; then
- LOWLATENCY_FLAG_USER="False"
+ DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "ETHERNET" ] ; then
- LOWLATENCY_FLAG_USER="True"
+ DEADLINE_SCHEDULER_FLAG_USER="True"
elif [ "$HW" = "OAI_USRP" ] ; then
- LOWLATENCY_FLAG_USER="False"
+ DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_BLADERF" ] ; then
- LOWLATENCY_FLAG_USER="False"
+ DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "OAI_LMSSDR" ] ; then
- LOWLATENCY_FLAG_USER="False"
+ DEADLINE_SCHEDULER_FLAG_USER="False"
elif [ "$HW" = "None" ] ; then
- LOWLATENCY_FLAG_USER="False"
+ DEADLINE_SCHEDULER_FLAG_USER="False"
else
echo_error "Unknown HW type $HW. Exiting now..."
exit
fi
else
- LOWLATENCY_FLAG_USER=$FORCE_LOWLATENCY_FLAG_USER
+ DEADLINE_SCHEDULER_FLAG_USER=$FORCE_DEADLINE_SCHEDULER_FLAG_USER
fi
#Disable CPU Affinity for deadline scheduler
- if [ "$LOWLATENCY_FLAG_USER" = "True" ] ; then
+ if [ "$DEADLINE_SCHEDULER_FLAG_USER" = "True" ] ; then
CPU_AFFINITY_FLAG_USER="False"
fi
- echo_info "Flags for Deadline scheduler: $LOWLATENCY_FLAG_USER"
+ echo_info "Flags for Deadline scheduler: $DEADLINE_SCHEDULER_FLAG_USER"
echo_info "Flags for CPU Affinity: $CPU_AFFINITY_FLAG_USER"
############################################
@@ -432,7 +432,7 @@ function main() {
echo "set ( RF_BOARD \"${HW}\")" >> $cmake_file
echo "set ( TRANSP_PRO \"${TP}\")" >> $cmake_file
echo "set(PACKAGE_NAME \"${lte_exec}\")" >> $cmake_file
- echo "set (LOWLATENCY \"${LOWLATENCY_FLAG_USER}\" )" >>$cmake_file
+ echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file
echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
cd $DIR/$lte_build_dir/build
@@ -660,7 +660,7 @@ function main() {
echo "set(RF_BOARD \"${HW}\")" >> $cmake_file
echo "set(TRANSP_PRO \"${TP}\")" >> $cmake_file
echo 'set(PACKAGE_NAME "\"rrh_gw\"")' >> $cmake_file
- echo "set (LOWLATENCY \"${LOWLATENCY_FLAG_USER}\" )" >>$cmake_file
+ echo "set (DEADLINE_SCHEDULER \"${DEADLINE_SCHEDULER_FLAG_USER}\" )" >>$cmake_file
echo "set (CPU_AFFINITY \"${CPU_AFFINITY_FLAG_USER}\" )" >>$cmake_file
echo 'include(${CMAKE_CURRENT_SOURCE_DIR}/../CMakeLists.txt)' >> $cmake_file
cd $DIR/$rrh_build_dir/build
diff --git a/cmake_targets/epc_test/CMakeLists.template b/cmake_targets/epc_test/CMakeLists.template
index 8a8223e4ae66741d33bcecc4de44a98c52412068..76defbc7d7f1318602aa6c9ecbc85be4169a94ff 100644
--- a/cmake_targets/epc_test/CMakeLists.template
+++ b/cmake_targets/epc_test/CMakeLists.template
@@ -29,7 +29,7 @@ set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
-set ( LOWLATENCY False )
+set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False)
diff --git a/cmake_targets/oaisim_build_oai/CMakeLists.template b/cmake_targets/oaisim_build_oai/CMakeLists.template
index 76564d8fdd77954a80dea1a63823d3c375924a72..0a05d68d10d5d6ce758e8aa17588c444632bf700 100644
--- a/cmake_targets/oaisim_build_oai/CMakeLists.template
+++ b/cmake_targets/oaisim_build_oai/CMakeLists.template
@@ -28,7 +28,7 @@ set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
-set ( LOWLATENCY False )
+set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False)
diff --git a/cmake_targets/oaisim_mme_build_oai/CMakeLists.template b/cmake_targets/oaisim_mme_build_oai/CMakeLists.template
index 1035a2859958a4b9e801746529f943a6b0171851..69fa209b16d266e5a5d846facba62904bd11143b 100644
--- a/cmake_targets/oaisim_mme_build_oai/CMakeLists.template
+++ b/cmake_targets/oaisim_mme_build_oai/CMakeLists.template
@@ -29,7 +29,7 @@ set ( LINUX_LIST False )
set ( LINUX False )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD False )
-set ( LOWLATENCY False )
+set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MIH_C_MEDIEVAL_EXTENSIONS False )
diff --git a/cmake_targets/oaisim_noS1_build_oai/CMakeLists.template b/cmake_targets/oaisim_noS1_build_oai/CMakeLists.template
index a9055101501a3c6a5ee1212e7c8f50258274dc1b..6d8fc6d26a77c3420673b341b2ebcfec22a7fe73 100644
--- a/cmake_targets/oaisim_noS1_build_oai/CMakeLists.template
+++ b/cmake_targets/oaisim_noS1_build_oai/CMakeLists.template
@@ -28,7 +28,7 @@ set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
-set ( LOWLATENCY False )
+set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
diff --git a/cmake_targets/s1c_mme_test/CMakeLists.template b/cmake_targets/s1c_mme_test/CMakeLists.template
index 4067202df16d6036e6354b0ca4d1eff851d74576..994edf835232401dbc9f41e70ae8b8e9e47e4740 100644
--- a/cmake_targets/s1c_mme_test/CMakeLists.template
+++ b/cmake_targets/s1c_mme_test/CMakeLists.template
@@ -29,7 +29,7 @@ set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
-set ( LOWLATENCY False )
+set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False)
diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper
index a40bd8c9962d489e7a563bbde295ed93ff36f594..00f6842ffddff67bf8fb5f161dbebb7e7e359062 100755
--- a/cmake_targets/tools/build_helper
+++ b/cmake_targets/tools/build_helper
@@ -293,7 +293,8 @@ check_install_oai_software() {
python-numpy \
sshpass \
libxslt1-dev \
- android-tools-adb
+ android-tools-adb \
+ iperf3
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
diff --git a/cmake_targets/tools/stop_exmimo2 b/cmake_targets/tools/stop_exmimo2
index a68fdb7d57d9a4e8c1457d5bdcccd67f2e42c64d..102c9e068094e6a998a9f36339044f7214283874 100755
--- a/cmake_targets/tools/stop_exmimo2
+++ b/cmake_targets/tools/stop_exmimo2
@@ -8,8 +8,12 @@ if [ "$OPENAIR_DIR" == "" ]; then
fi
sudo -E bash -c 'echo 3 > /proc/sys/vm/drop_caches'
-#load the module
-sudo -E $OPENAIR_DIR/cmake_targets/tools/init_exmimo2
+exmimo_mod=`lsmod |grep openair_rf`
+#load the module only if absent to avoid kernel crashes
+if [ -z "$exmimo_mod" ]
+then
+ sudo -E $OPENAIR_DIR/cmake_targets/tools/init_exmimo2
+fi
#now we stop the card from transmitting anything
cd $OPENAIR_DIR/targets/bin
diff --git a/openair1/PHY/LTE_TRANSPORT/dci.c b/openair1/PHY/LTE_TRANSPORT/dci.c
index c0ea61d48e4e828c340f9e34002875a5ad621ecc..e14cdac1ac9df060610c1ceece5272c227e24d49 100644
--- a/openair1/PHY/LTE_TRANSPORT/dci.c
+++ b/openair1/PHY/LTE_TRANSPORT/dci.c
@@ -159,7 +159,7 @@ uint16_t extract_crc(uint8_t *dci,uint8_t dci_len)
// dci[(dci_len>>3)+1] = 0;
// dci[(dci_len>>3)+2] = 0;
return((uint16_t)crc16);
-
+
}
diff --git a/openair1/PHY/impl_defs_top.h b/openair1/PHY/impl_defs_top.h
index 75da3fab6dcd061e852079a13f1baf7c6eb21302..98615d6f6e8ede879cf25abd86006b6c875c8721 100755
--- a/openair1/PHY/impl_defs_top.h
+++ b/openair1/PHY/impl_defs_top.h
@@ -50,6 +50,7 @@
* @defgroup _GENERIC_PHY_RF_INTERFACE_ Generic PHY - RF Interface
* @defgroup _USRP_PHY_RF_INTERFACE_ PHY - USRP RF Interface
* @defgroup _BLADERF_PHY_RF_INTERFACE_ PHY - BLADERF RF Interface
+ * @defgroup _LMSSDR_PHY_RF_INTERFACE_ PHY - LMSSDR RF Interface
* @}
*
* @ingroup _ref_implementation_
diff --git a/openair1/SCHED/phy_mac_stub.c b/openair1/SCHED/phy_mac_stub.c
index b7f2e57f7c181f0bdd7ee4b4e9e79a14dd4c7b7f..79801350b014cd86fbaa576146ab18878f0b84f4 100644
--- a/openair1/SCHED/phy_mac_stub.c
+++ b/openair1/SCHED/phy_mac_stub.c
@@ -583,7 +583,6 @@ void fill_dci(DCI_PDU *DCI_pdu,PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc)
void fill_dci_emos(DCI_PDU *DCI_pdu, uint8_t subframe, PHY_VARS_eNB *eNB)
{
-
//uint8_t cooperation_flag = eNB->cooperation_flag;
uint8_t transmission_mode = eNB->transmission_mode[0];
diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
index d9b7bfa9050be30fb22b28725395916b08389250..6cc1d8c5d2dfec4fe75f4e9d4674e0e74124452d 100644
--- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
+++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
@@ -37,6 +37,7 @@
#include <stdlib.h>
#include <inttypes.h>
#include "bladerf_lib.h"
+#include "math.h"
/** @addtogroup _BLADERF_PHY_RF_INTERFACE_
* @{
@@ -58,14 +59,16 @@ int num_devices=0;
/*! \brief BladeRF Init function (not used at the moment)
* \param device RF frontend parameters set by application
+ * \returns 0 on success
*/
int trx_brf_init(openair0_device *device) {
-
+ return 0;
}
/*! \brief get current timestamp
*\param device the hardware to use
*\param module the bladeRf module
+ *\returns timestamp of BladeRF
*/
openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module module) {
@@ -83,28 +86,22 @@ openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module mod
}
/*! \brief Start BladeRF
- *\param device the hardware to use
+ * \param device the hardware to use
+ * \returns 0 on success
*/
int trx_brf_start(openair0_device *device) {
return 0;
}
-/*! \brief Get BladeRF stats
- *\param device the hardware to use
- */
-static void trx_brf_stats(openair0_device *device){
-
-
-}
-
/*! \brief Called to send samples to the BladeRF RF target
- @param device pointer to the device structure specific to the RF hardware target
- @param timestamp The timestamp at whicch the first sample MUST be sent
- @param buff Buffer which holds the samples
- @param nsamps number of samples to be sent
- @param cc index of the component carrier
- @param flags Ignored for the moment
+ \param device pointer to the device structure specific to the RF hardware target
+ \param timestamp The timestamp at whicch the first sample MUST be sent
+ \param buff Buffer which holds the samples
+ \param nsamps number of samples to be sent
+ \param cc index of the component carrier
+ \param flags Ignored for the moment
+ \returns 0 on success
*/
static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc, int flags) {
@@ -156,6 +153,7 @@ static int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp,
* \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
* \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
* \param cc Index of component carrier
+ * \returns number of samples read
*/
static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
@@ -176,9 +174,10 @@ static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp,
brf->num_rx_errors++;
} else if ( brf->meta_rx.status & BLADERF_META_STATUS_OVERRUN) {
brf->num_overflows++;
- printf("RX overrun (%d) is detected. t=%u. Got %u samples. nsymps %d\n",
+ printf("RX overrun (%d) is detected. t=" "%" PRIu64 "Got %u samples. nsymps %d\n",
brf->num_overflows,brf->meta_rx.timestamp, brf->meta_rx.actual_count, nsamps);
}
+
//printf("Current RX timestampe %u\n", brf->meta_rx.timestamp);
//printf("[BRF] (buff %p) ts=0x%"PRIu64" %s\n",samples, brf->meta_rx.timestamp,bladerf_strerror(status));
brf->rx_current_ts=brf->meta_rx.timestamp;
@@ -196,7 +195,7 @@ static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp,
/*! \brief Terminate operation of the BladeRF transceiver -- free all associated resources
* \param device the hardware to use
*/
-int trx_brf_end(openair0_device *device) {
+void trx_brf_end(openair0_device *device) {
int status;
brf_state_t *brf = (brf_state_t*)device->priv;
@@ -208,7 +207,6 @@ int trx_brf_end(openair0_device *device) {
fprintf(stderr, "Failed to disable TX module: %s\n", bladerf_strerror(status));
}
bladerf_close(brf->dev);
- return 0;
}
/*! \brief print the BladeRF statistics
@@ -231,10 +229,11 @@ int trx_brf_reset_stats(openair0_device* device) {
}
-/*! \brief Stop USRP
- * \param device the hardware to use
+/*! \brief Stop BladeRF
+ * \param card the hardware to use
+ * \returns 0 in success
*/
-int trx_brf_stop(openair0_device* device) {
+int trx_brf_stop(int card) {
return(0);
@@ -242,9 +241,11 @@ int trx_brf_stop(openair0_device* device) {
/*! \brief Set frequencies (TX/RX)
* \param device the hardware to use
+ * \param openair0_cfg1 openair0 Config structure (ignored. It is there to comply with RF common API)
+ * \param exmimo_dump_config (ignored)
* \returns 0 in success
*/
-int trx_brf_set_freq(openair0_device* device) {
+int trx_brf_set_freq(openair0_device* device, openair0_config_t *openair0_cfg1,int exmimo_dump_config) {
int status;
brf_state_t *brf = (brf_state_t *)device->priv;
@@ -269,9 +270,10 @@ int trx_brf_set_freq(openair0_device* device) {
/*! \brief Set Gains (TX/RX)
* \param device the hardware to use
+ * \param openair0_cfg openair0 Config structure
* \returns 0 in success
*/
-int trx_brf_set_gains(openair0_device* device) {
+int trx_brf_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) {
return(0);
@@ -283,12 +285,17 @@ int trx_brf_set_gains(openair0_device* device) {
int16_t cos_fsover8[8] = {2047, 1447, 0, -1448, -2047, -1448, 0, 1447};
int16_t cos_3fsover8[8] = {2047, -1448, 0, 1447, -2047, 1447, 0, -1448};
+/*! \brief calibration table for BladeRF */
rx_gain_calib_table_t calib_table_fx4[] = {
{2300000000.0,53.5},
{1880000000.0,57.0},
{816000000.0,73.0},
{-1,0}};
+/*! \brief set RX gain offset from calibration table
+ * \param openair0_cfg RF frontend parameters set by application
+ * \param chain_index RF chain ID
+ */
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) {
int i=0;
@@ -310,6 +317,9 @@ void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) {
}
+/*! \brief Calibrate LMSSDR RF
+ * \param device the hardware to use
+ */
void calibrate_rf(openair0_device *device) {
@@ -885,11 +895,10 @@ void calibrate_rf(openair0_device *device) {
/*! \brief Initialize Openair BLADERF target. It returns 0 if OK
* \param device the hardware to use
* \param openair0_cfg RF frontend parameters set by application
+ * \returns 0 on success
*/
int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
int status;
- int card=0;
-
brf_state_t *brf = (brf_state_t*)malloc(sizeof(brf_state_t));
memset(brf, 0, sizeof(brf_state_t));
/* device specific */
@@ -1063,8 +1072,6 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
}else
printf("[BRF] RX module calibrated DC \n");
-
-
bladerf_log_set_verbosity(get_brf_log_level(openair0_cfg->log_level));
printf("BLADERF: Initializing openair0_device\n");
@@ -1091,16 +1098,18 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
/*! \brief bladeRF error report
* \param status
+ * \returns 0 on success
*/
int brf_error(int status) {
//exit(-1);
- //return 1; // or status error code
+ return status; // or status error code
}
/*! \brief Open BladeRF from serial port
* \param serial name of serial port on which to open BladeRF device
+ * \returns bladerf device structure
*/
struct bladerf * open_bladerf_from_serial(const char *serial) {
@@ -1131,6 +1140,7 @@ struct bladerf * open_bladerf_from_serial(const char *serial) {
/*! \brief Get BladeRF log level
* \param log_level log level
+ * \returns log level of BLADERF device
*/
int get_brf_log_level(int log_level){
diff --git a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h
index 3a05c80e5c8f83e8d7e7434e3e5ead3484493709..743baf1bc815cdafd979135d6fb3bcedfe16b425 100644
--- a/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h
+++ b/targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h
@@ -106,6 +106,27 @@ typedef struct {
/*
* func prototypes
*/
+/*! \brief BladeRF Init function (not used at the moment)
+ * \param device RF frontend parameters set by application
+ */
+int trx_brf_init(openair0_device *device);
+
+/*! \brief get current timestamp
+ *\param device the hardware to use
+ *\param module the bladeRf module
+ */
+openair0_timestamp trx_get_timestamp(openair0_device *device, bladerf_module module);
+/*! \brief Get BladeRF log level
+ * \param log_level log level
+ * \returns log level of BLADERF device
+ */
+int get_brf_log_level(int log_level);
+
+/*! \brief bladeRF error report
+ * \param status
+ * \returns 0 on success
+ */
int brf_error(int status);
+
/*@}*/
diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
index 3ca15c66602c7760a563df391de9a8ba2f09a453..4be796e5888ace3f274bef977dc53ba24c68fe03 100644
--- a/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
+++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
@@ -49,6 +49,9 @@
#include <cmath>
+/** @addtogroup _LMSSDR_PHY_RF_INTERFACE_
+ * @{
+ */
///define for parameter enumeration if prefix might be needed
#define LMS7param(id) id
@@ -69,6 +72,15 @@ extern "C"
int write_output(const char *fname,const char *vname,void *data,int length,int dec,char format);
}
+/*! \brief Called to send samples to the LMSSDR RF target
+ \param device pointer to the device structure specific to the RF hardware target
+ \param timestamp The timestamp at whicch the first sample MUST be sent
+ \param buff Buffer which holds the samples
+ \param nsamps number of samples to be sent
+ \param antenna_id index of the antenna
+ \param flags Ignored for the moment
+ \returns 0 on success
+*/
int trx_lms_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int antenna_id, int flags) {
LMS_TRxWrite((int16_t*)buff[0], nsamps,0, timestamp);
@@ -76,7 +88,17 @@ int trx_lms_write(openair0_device *device, openair0_timestamp timestamp, void **
return nsamps;
}
-
+/*! \brief Receive samples from hardware.
+ * Read \ref nsamps samples from each channel to buffers. buff[0] is the array for
+ * the first channel. *ptimestamp is the time at which the first sample
+ * was received.
+ * \param device the hardware to use
+ * \param[out] ptimestamp the time at which the first sample was received.
+ * \param[out] buff An array of pointers to buffers for received samples. The buffers must be large enough to hold the number of samples \ref nsamps.
+ * \param nsamps Number of samples. One sample is 2 byte I + 2 byte Q => 4 byte.
+ * \param antenna_id Index of antenna port
+ * \returns number of samples read
+*/
int trx_lms_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int antenna_id) {
uint64_t timestamp;
@@ -87,6 +109,11 @@ int trx_lms_read(openair0_device *device, openair0_timestamp *ptimestamp, void *
return ret;
}
+
+/*! \brief set RX gain offset from calibration table
+ * \param openair0_cfg RF frontend parameters set by application
+ * \param chain_index RF chain ID
+ */
void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) {
int i=0;
@@ -107,469 +134,12 @@ void set_rx_gain_offset(openair0_config_t *openair0_cfg, int chain_index) {
}
}
-/*
-void calibrate_rf(openair0_device *device) {
-
- openair0_timestamp ptimestamp;
- int16_t *calib_buffp,*calib_tx_buffp;
- int16_t calib_buff[2*RXDCLENGTH];
- int16_t calib_tx_buff[2*RXDCLENGTH];
- int i,j;
- int8_t offI,offQ,offIold,offQold,offInew,offQnew,offphase,offphaseold,offphasenew,offgain,offgainold,offgainnew;
- int32_t meanI,meanQ,meanIold,meanQold;
- int cnt=0,loop;
- liblms7_status opStatus;
- int16_t dcoffi;
- int16_t dcoffq;
- int16_t dccorri;
- int16_t dccorrq;
- const int16_t firCoefs[] =
- {
- -2531,
- -517,
- 2708,
- 188,
- -3059,
- 216,
- 3569,
- -770,
- -4199,
- 1541,
- 4886,
- -2577,
- -5552,
- 3909,
- 6108,
- -5537,
- -6457,
- 7440,
- 6507,
- -9566,
- -6174,
- 11845,
- 5391,
- -14179,
- -4110,
- 16457,
- 2310,
- -18561,
- 0,
- 20369,
- -2780,
- -21752,
- 5963,
- 22610,
- -9456,
- -22859,
- 13127,
- 22444,
- -16854,
- -21319,
- 20489,
- 19492,
- -23883,
- -17002,
- 26881,
- 13902,
- -29372,
- -10313,
- 31226,
- 6345,
- -32380,
- -2141,
- 32767,
- -2141,
- -32380,
- 6345,
- 31226,
- -10313,
- -29372,
- 13902,
- 26881,
- -17002,
- -23883,
- 19492,
- 20489,
- -21319,
- -16854,
- 22444,
- 13127,
- -22859,
- -9456,
- 22610,
- 5963,
- -21752,
- -2780,
- 20369,
- 0,
- -18561,
- 2310,
- 16457,
- -4110,
- -14179,
- 5391,
- 11845,
- -6174,
- -9566,
- 6507,
- 7440,
- -6457,
- -5537,
- 6108,
- 3909,
- -5552,
- -2577,
- 4886,
- 1541,
- -4199,
- -770,
- 3569,
- 216,
- -3059,
- 188,
- 2708,
- -517,
- -2531
- };
-
- j=0;
- for (i=0;i<RXDCLENGTH;i++) {
- calib_tx_buff[j++] = cos_fsover8[i&7];
- calib_tx_buff[j++] = cos_fsover8[(i+6)&7]; // sin
- }
- calib_buffp = &calib_buff[0];
- calib_tx_buffp = &calib_tx_buff[0];
-
- lms7->BackupAllRegisters();
- uint8_t ch = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(MAC));
- //Stage 1
- uint8_t sel_band1_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF));
- uint8_t sel_band2_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF));
- {
- uint16_t requiredRegs[] = { 0x0400, 0x040A, 0x010D, 0x040C };
- uint16_t requiredMask[] = { 0x6000, 0x3007, 0x0040, 0x00FF }; //CAPSEL, AGC_MODE, AGC_AVG, EN_DCOFF, Bypasses
- uint16_t requiredValue[] = { 0x0000, 0x1007, 0x0040, 0x00BD };
-
- lms7->Modify_SPI_Reg_mask(requiredRegs, requiredMask, requiredValue, 0, 3);
- }
-
- // opStatus = lms7->SetFrequencySX(LMS7002M::Rx, device->openair0_cfg[0].tx_freq[0]/1e6,30.72);
- // put TX on fs/4
- opStatus = lms7->CalibrateRxSetup(device->openair0_cfg[0].sample_rate/1e6);
- if (opStatus != LIBLMS7_SUCCESS) {
- printf("Cannot calibrate for %f MHz\n",device->openair0_cfg[0].sample_rate/1e6);
- exit(-1);
- }
- // fill TX buffer with fs/8 complex sinusoid
- offIold=offQold=64;
- lms7->SetRxDCOFF(offIold,offQold);
- LMS_RxStart();
- for (i=0;i<NUMBUFF;i++)
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
-
- for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
- meanIold+=calib_buff[j++];
- meanQold+=calib_buff[j++];
- }
- meanIold/=RXDCLENGTH;
- meanQold/=RXDCLENGTH;
- printf("[LMS] RX DC: (%d,%d) => (%d,%d)\n",offIold,offQold,meanIold,meanQold);
-
- offI=offQ=-64;
- lms7->SetRxDCOFF(offI,offQ);
-
- for (i=0;i<NUMBUFF;i++)
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
-
- for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
- meanI+=calib_buff[j++];
- meanQ+=calib_buff[j++];
- }
- meanI/=RXDCLENGTH;
- meanQ/=RXDCLENGTH;
- printf("[LMS] RX DC: (%d,%d) => (%d,%d)\n",offI,offQ,meanI,meanQ);
-
- while (cnt++ < 7) {
-
- offInew=(offIold+offI)>>1;
- offQnew=(offQold+offQ)>>1;
-
- if (meanI*meanI < meanIold*meanIold) {
- meanIold = meanI;
- offIold = offI;
- printf("[LMS] *** RX DC: offI %d => %d\n",offIold,meanI);
- }
- if (meanQ*meanQ < meanQold*meanQold) {
- meanQold = meanQ;
- offQold = offQ;
- printf("[LMS] *** RX DC: offQ %d => %d\n",offQold,meanQ);
- }
- offI = offInew;
- offQ = offQnew;
-
- lms7->SetRxDCOFF(offI,offQ);
-
- for (i=0;i<NUMBUFF;i++)
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
-
- for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
- meanI+=calib_buff[j++];
- meanQ+=calib_buff[j++];
- }
- meanI/=RXDCLENGTH;
- meanQ/=RXDCLENGTH;
- printf("[LMS] RX DC: (%d,%d) => (%d,%d)\n",offI,offQ,meanI,meanQ);
- }
- if (meanI*meanI < meanIold*meanIold) {
- meanIold = meanI;
- offIold = offI;
- printf("[LMS] *** RX DC: offI %d => %d\n",offIold,meanI);
- }
- if (meanQ*meanQ < meanQold*meanQold) {
- meanQold = meanQ;
- offQold = offQ;
- printf("[LMS] *** RX DC: offQ %d => %d\n",offQold,meanQ);
- }
-
- printf("[LMS] RX DC: (%d,%d) => (%d,%d)\n",offIold,offQold,meanIold,meanQold);
-
- lms7->SetRxDCOFF(offIold,offQold);
-
- dcoffi = offIold;
- dcoffq = offQold;
-
- lms7->Modify_SPI_Reg_bits(LMS7param(MAC), ch);
- lms7->Modify_SPI_Reg_bits(LMS7param(AGC_MODE_RXTSP), 1);
- lms7->Modify_SPI_Reg_bits(LMS7param(CAPSEL), 0);
-
- // TX LO leakage
- offQold=offIold=127;
- lms7->SPI_write(0x0204,(((int16_t)offIold)<<7)|offQold);
-
- {
- uint16_t requiredRegs[] = { 0x0400, 0x040A, 0x010D, 0x040C };
- uint16_t requiredMask[] = { 0x6000, 0x3007, 0x0040, 0x00FF }; //CAPSEL, AGC_MODE, AGC_AVG, EN_DCOFF, Bypasses
- uint16_t requiredValue[] = { 0x0000, 0x1007, 0x0040, 0x00BD };
-
- lms7->Modify_SPI_Reg_mask(requiredRegs, requiredMask, requiredValue, 0, 3);
- }
- sel_band1_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND1_TRF));
- sel_band2_trf = (uint8_t)lms7->Get_SPI_Reg_bits(LMS7param(SEL_BAND2_TRF));
- //B
- lms7->Modify_SPI_Reg_bits(0x0100, 0, 0, 1); //EN_G_TRF 1
- if (sel_band1_trf == 1)
- {
- lms7->Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_1_RFE), 0); //PD_RLOOPB_1_RFE 0
- lms7->Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB1_RFE), 0); //EN_INSHSW_LB1 0
- }
- if (sel_band2_trf == 1)
- {
- lms7->Modify_SPI_Reg_bits(LMS7param(PD_RLOOPB_2_RFE), 0); //PD_RLOOPB_2_RFE 0
- lms7->Modify_SPI_Reg_bits(LMS7param(EN_INSHSW_LB2_RFE), 0); // EN_INSHSW_LB2 0
- }
- // FixRXSaturation();
-
- lms7->Modify_SPI_Reg_bits(LMS7param(GFIR3_BYP_RXTSP), 0); //GFIR3_BYP 0
- lms7->Modify_SPI_Reg_bits(LMS7param(HBD_OVR_RXTSP), 2);
- lms7->Modify_SPI_Reg_bits(LMS7param(GFIR3_L_RXTSP), 7);
- lms7->Modify_SPI_Reg_bits(LMS7param(GFIR3_N_RXTSP), 7);
-
- lms7->SetGFIRCoefficients(LMS7002M::Rx, 2, firCoefs, sizeof(firCoefs) / sizeof(int16_t));
-
- for (i=0;i<NUMBUFF;i++) {
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
- trx_lms_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
- }
-
- write_output("calibrx.m","rxs",calib_buffp,RXDCLENGTH,1,1);
- exit(-1);
- for (meanIold=meanQold=i=j=0;i<RXDCLENGTH;i++) {
- switch (i&3) {
- case 0:
- meanIold+=calib_buff[j++];
- break;
- case 1:
- meanQold+=calib_buff[j++];
- break;
- case 2:
- meanIold-=calib_buff[j++];
- break;
- case 3:
- meanQold-=calib_buff[j++];
- break;
- }
- }
- // meanIold/=RXDCLENGTH;
- // meanQold/=RXDCLENGTH;
- printf("[LMS] TX DC (offI): %d => (%d,%d)\n",offIold,meanIold,meanQold);
-
- offI=-128;
- lms7->SPI_write(0x0204,(((int16_t)offI)<<7)|offQold);
-
- for (i=0;i<NUMBUFF;i++) {
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
- trx_lms_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
- }
-
- for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
- switch (i&3) {
- case 0:
- meanI+=calib_buff[j++];
- break;
- case 1:
- meanQ+=calib_buff[j++];
- break;
- case 2:
- meanI-=calib_buff[j++];
- break;
- case 3:
- meanQ-=calib_buff[j++];
- break;
- }
- }
- // meanI/=RXDCLENGTH;
- // meanQ/=RXDCLENGTH;
- printf("[LMS] TX DC (offI): %d => (%d,%d)\n",offI,meanI,meanQ);
- cnt = 0;
- while (cnt++ < 8) {
-
- offInew=(offIold+offI)>>1;
- if (meanI*meanI+meanQ*meanQ < meanIold*meanIold +meanQold*meanQold) {
- printf("[LMS] TX DC (offI): ([%d,%d]) => %d : %d\n",offIold,offI,offInew,meanI*meanI+meanQ*meanQ);
- meanIold = meanI;
- meanQold = meanQ;
- offIold = offI;
- }
- offI = offInew;
- lms7->SPI_write(0x0204,(((int16_t)offI)<<7)|offQold);
-
- for (i=0;i<NUMBUFF;i++) {
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
- trx_lms_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
- }
-
- for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
- switch (i&3) {
- case 0:
- meanI+=calib_buff[j++];
- break;
- case 1:
- meanQ+=calib_buff[j++];
- break;
- case 2:
- meanI-=calib_buff[j++];
- break;
- case 3:
- meanQ-=calib_buff[j++];
- break;
- }
- }
- // meanI/=RXDCLENGTH;
- // meanQ/=RXDCLENGTH;
- // printf("[LMS] TX DC (offI): %d => (%d,%d)\n",offI,meanI,meanQ);
- }
-
-
- if (meanI*meanI+meanQ*meanQ < meanIold*meanIold +meanQold*meanQold) {
- printf("[LMS] TX DC (offI): ([%d,%d]) => %d : %d\n",offIold,offI,offInew,meanI*meanI+meanQ*meanQ);
- meanIold = meanI;
- meanQold = meanQ;
- offIold = offI;
- }
- offQ=-128;
- lms7->SPI_write(0x0204,(((int16_t)offIold)<<7)|offQ);
-
- for (i=0;i<NUMBUFF;i++) {
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
- trx_lms_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
- }
-
- for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
- switch (i&3) {
- case 0:
- meanI+=calib_buff[j++];
- break;
- case 1:
- meanQ+=calib_buff[j++];
- break;
- case 2:
- meanI-=calib_buff[j++];
- break;
- case 3:
- meanQ-=calib_buff[j++];
- break;
- }
- }
- // meanI/=RXDCLENGTH;
- // meanQ/=RXDCLENGTH;
- printf("[LMS] TX DC (offQ): %d => (%d,%d)\n",offQ,meanI,meanQ);
-
- cnt=0;
- while (cnt++ < 8) {
-
- offQnew=(offQold+offQ)>>1;
- if (meanI*meanI+meanQ*meanQ < meanIold*meanIold +meanQold*meanQold) {
- printf("[LMS] TX DC (offQ): ([%d,%d]) => %d : %d\n",offQold,offQ,offQnew,meanI*meanI+meanQ*meanQ);
-
- meanIold = meanI;
- meanQold = meanQ;
- offQold = offQ;
- }
- offQ = offQnew;
- lms7->SPI_write(0x0204,(((int16_t)offIold)<<7)|offQ);
-
-
- for (i=0;i<NUMBUFF;i++) {
- trx_lms_read(device, &ptimestamp, (void **)&calib_buffp, RXDCLENGTH, 0);
- trx_lms_write(device,ptimestamp+5*RXDCLENGTH, (void **)&calib_tx_buffp, RXDCLENGTH, 0, 0);
- }
-
- for (meanI=meanQ=i=j=0;i<RXDCLENGTH;i++) {
- switch (i&3) {
- case 0:
- meanI+=calib_buff[j++];
- break;
- case 1:
- meanQ+=calib_buff[j++];
- break;
- case 2:
- meanI-=calib_buff[j++];
- break;
- case 3:
- meanQ-=calib_buff[j++];
- break;
- }
- }
- // meanI/=RXDCLENGTH;
- // meanQ/=RXDCLENGTH;
- // printf("[LMS] TX DC (offQ): %d => (%d,%d)\n",offQ,meanI,meanQ);
- }
-
- LMS_RxStop();
-
- printf("[LMS] TX DC: (%d,%d) => (%d,%d)\n",offIold,offQold,meanIold,meanQold);
-
- dccorri = offIold;
- dccorrq = offQold;
-
-
- lms7->RestoreAllRegisters();
- lms7->Modify_SPI_Reg_bits(LMS7param(MAC), ch);
-
- lms7->Modify_SPI_Reg_bits(LMS7param(DCOFFI_RFE), dcoffi);
- lms7->Modify_SPI_Reg_bits(LMS7param(DCOFFQ_RFE), dcoffq);
- lms7->Modify_SPI_Reg_bits(LMS7param(DCCORRI_TXTSP), dccorri);
- lms7->Modify_SPI_Reg_bits(LMS7param(DCCORRQ_TXTSP), dccorrq);
- // lms7->Modify_SPI_Reg_bits(LMS7param(GCORRI_TXTSP), gcorri);
- // lms7->Modify_SPI_Reg_bits(LMS7param(GCORRQ_TXTSP), gcorrq);
- // lms7->Modify_SPI_Reg_bits(LMS7param(IQCORR_TXTSP), iqcorr);
-
- // lms7->Modify_SPI_Reg_bits(LMS7param(DC_BYP_TXTSP), 0); //DC_BYP
- lms7->Modify_SPI_Reg_bits(0x0208, 1, 0, 0); //GC_BYP PH_BYP
-
-}
-*/
+/*! \brief Set Gains (TX/RX) on LMSSDR
+ * \param device the hardware to use
+ * \param openair0_cfg openair0 Config structure
+ * \returns 0 in success
+ */
int trx_lms_set_gains(openair0_device* device, openair0_config_t *openair0_cfg) {
@@ -589,6 +159,10 @@ int trx_lms_set_gains(openair0_device* device, openair0_config_t *openair0_cfg)
return(0);
}
+/*! \brief Start LMSSDR
+ * \param device the hardware to use
+ * \returns 0 on success
+ */
int trx_lms_start(openair0_device *device){
@@ -746,7 +320,10 @@ int trx_lms_start(openair0_device *device){
return 0;
}
-
+/*! \brief Stop LMSSDR
+ * \param card Index of the RF card to use
+ * \returns 0 on success
+ */
int trx_lms_stop(int card) {
/*
LMS_DeviceClose(usbport);
@@ -756,6 +333,12 @@ int trx_lms_stop(int card) {
*/
}
+/*! \brief Set frequencies (TX/RX)
+ * \param device the hardware to use
+ * \param openair0_cfg openair0 Config structure (ignored. It is there to comply with RF common API)
+ * \param exmimo_dump_config (ignored)
+ * \returns 0 in success
+ */
int trx_lms_set_freq(openair0_device* device, openair0_config_t *openair0_cfg,int exmimo_dump_config) {
//Control port must be connected
@@ -768,6 +351,7 @@ int trx_lms_set_freq(openair0_device* device, openair0_config_t *openair0_cfg,in
}
// 31 = 19 dB => 105 dB total gain @ 2.6 GHz
+/*! \brief calibration table for LMSSDR */
rx_gain_calib_table_t calib_table_sodera[] = {
{3500000000.0,70.0},
{2660000000.0,80.0},
@@ -780,33 +364,30 @@ rx_gain_calib_table_t calib_table_sodera[] = {
-
-
+/*! \brief Get LMSSDR Statistics
+ * \param device the hardware to use
+ * \returns 0 in success
+ */
int trx_lms_get_stats(openair0_device* device) {
return(0);
}
+/*! \brief Reset LMSSDR Statistics
+ * \param device the hardware to use
+ * \returns 0 in success
+ */
int trx_lms_reset_stats(openair0_device* device) {
return(0);
}
-int openair0_set_gains(openair0_device* device,
- openair0_config_t *openair0_cfg) {
-
- return(0);
-}
-
-int openair0_set_frequencies(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
-
- return(0);
-}
-
-
+/*! \brief Terminate operation of the LMSSDR transceiver -- free all associated resources
+ * \param device the hardware to use
+ */
void trx_lms_end(openair0_device *device) {
@@ -877,3 +458,4 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg){
return 0;
}
}
+/*@}*/
diff --git a/targets/DOCS/Doxyfile b/targets/DOCS/Doxyfile
index ac6ee99480063889df7bec664722b23229e47ff9..a060f6597ab894c046e427960ed42c2ba1084000 100644
--- a/targets/DOCS/Doxyfile
+++ b/targets/DOCS/Doxyfile
@@ -796,7 +796,8 @@ INPUT = $(OPENAIR1_DIR)/PHY/defs.h \
$(OPENAIR_TARGETS)/ARCH/COMMON/common_lib.h \
$(OPENAIR_TARGETS)/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp \
$(OPENAIR_TARGETS)/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c \
- $(OPENAIR_TARGETS)/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h
+ $(OPENAIR_TARGETS)/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h \
+ $(OPENAIR_TARGETS)/ARCH/LMSSDR/USERSPACE/LIB/lms_lib.cpp
# This tag can be used to specify the character encoding of the source files
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf
deleted file mode 100644
index d4b88383e249fac091e2e8bbb6ecfe779398e191..0000000000000000000000000000000000000000
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.25PRB.usrpx310.epc.remote.conf
+++ /dev/null
@@ -1,169 +0,0 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
- ////////// Identification parameters:
- eNB_ID = 0xe00;
-
- cell_type = "CELL_MACRO_ENB";
-
- eNB_name = "eNB_Eurecom_LTEBox";
-
- // Tracking area code, 0x0000 and 0xfffe are reserved values
- tracking_area_code = "1";
-
- mobile_country_code = "208";
- mobile_network_code = "92";
-
- ////////// Physical parameters:
-
- component_carriers = (
- {
- frame_type = "FDD";
- tdd_config = 3;
- tdd_config_s = 0;
- prefix_type = "NORMAL";
- eutra_band = 7;
- downlink_frequency = 2660000000L;
- uplink_frequency_offset = -120000000;
- Nid_cell = 0;
- N_RB_DL = 25;
- Nid_cell_mbsfn = 0;
- nb_antennas_tx = 1;
- nb_antennas_rx = 1;
- tx_gain = 32;
- rx_gain = 116;
- prach_root = 0;
- prach_config_index = 0;
- prach_high_speed = "DISABLE";
- prach_zero_correlation = 1;
- prach_freq_offset = 2;
- pucch_delta_shift = 1;
- pucch_nRB_CQI = 1;
- pucch_nCS_AN = 0;
- pucch_n1_AN = 32;
- pdsch_referenceSignalPower = -16;
- pdsch_p_b = 0;
- pusch_n_SB = 1;
- pusch_enable64QAM = "DISABLE";
- pusch_hoppingMode = "interSubFrame";
- pusch_hoppingOffset = 0;
- pusch_groupHoppingEnabled = "ENABLE";
- pusch_groupAssignment = 0;
- pusch_sequenceHoppingEnabled = "DISABLE";
- pusch_nDMRS1 = 1;
- phich_duration = "NORMAL";
- phich_resource = "ONESIXTH";
- srs_enable = "DISABLE";
- /* srs_BandwidthConfig =;
- srs_SubframeConfig =;
- srs_ackNackST =;
- srs_MaxUpPts =;*/
-
- pusch_p0_Nominal = -90;
- pusch_alpha = "AL1";
- pucch_p0_Nominal = -108;
- msg3_delta_Preamble = 6;
- pucch_deltaF_Format1 = "deltaF2";
- pucch_deltaF_Format1b = "deltaF3";
- pucch_deltaF_Format2 = "deltaF0";
- pucch_deltaF_Format2a = "deltaF0";
- pucch_deltaF_Format2b = "deltaF0";
-
- rach_numberOfRA_Preambles = 64;
- rach_preamblesGroupAConfig = "DISABLE";
- /*
- rach_sizeOfRA_PreamblesGroupA = ;
- rach_messageSizeGroupA = ;
- rach_messagePowerOffsetGroupB = ;
- */
- rach_powerRampingStep = 4;
- rach_preambleInitialReceivedTargetPower = -108;
- rach_preambleTransMax = 10;
- rach_raResponseWindowSize = 10;
- rach_macContentionResolutionTimer = 48;
- rach_maxHARQ_Msg3Tx = 4;
-
- pcch_default_PagingCycle = 128;
- pcch_nB = "oneT";
- bcch_modificationPeriodCoeff = 2;
- ue_TimersAndConstants_t300 = 1000;
- ue_TimersAndConstants_t301 = 1000;
- ue_TimersAndConstants_t310 = 1000;
- ue_TimersAndConstants_t311 = 10000;
- ue_TimersAndConstants_n310 = 20;
- ue_TimersAndConstants_n311 = 1;
- }
- );
-
-
- srb1_parameters :
- {
- # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
- timer_poll_retransmit = 80;
-
- # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
- timer_reordering = 35;
-
- # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
- timer_status_prohibit = 0;
-
- # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
- poll_pdu = 4;
-
- # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
- poll_byte = 99999;
-
- # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
- max_retx_threshold = 4;
- }
-
- # ------- SCTP definitions
- SCTP :
- {
- # Number of streams to use in input/output
- SCTP_INSTREAMS = 2;
- SCTP_OUTSTREAMS = 2;
- };
-
- ////////// MME parameters:
- mme_ip_address = ( { ipv4 = "192.168.12.26";
- ipv6 = "192:168:30::17";
- active = "yes";
- preference = "ipv4";
- }
- );
-
- NETWORK_INTERFACES :
- {
- ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
-
- ENB_INTERFACE_NAME_FOR_S1U = "eth0";
- ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
- ENB_PORT_FOR_S1U = 2152; # Spec 2152
- };
-
- log_config :
- {
- global_log_level ="debug";
- global_log_verbosity ="medium";
- hw_log_level ="info";
- hw_log_verbosity ="medium";
- phy_log_level ="info";
- phy_log_verbosity ="medium";
- mac_log_level ="info";
- mac_log_verbosity ="high";
- rlc_log_level ="info";
- rlc_log_verbosity ="medium";
- pdcp_log_level ="info";
- pdcp_log_verbosity ="medium";
- rrc_log_level ="info";
- rrc_log_verbosity ="medium";
- };
-
- }
-);
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf
index 004af14749518fb6d75a95b466988fe15c589d6a..434dd056b45af43cc6d87f4ddc14dacbf51a0f6c 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf
@@ -151,7 +151,7 @@ rrh_gw_config = (
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 4;
- tx_sample_advance = 113;
+ tx_sample_advance = 103;
tx_scheduling_advance = 9;
}
@@ -185,4 +185,4 @@ rrh_gw_config = (
rrc_log_verbosity ="medium";
};
}
-);
+);
\ No newline at end of file
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
index f4818eab9d02cdaa9d4ba37d9c7f2be76f8d5b11..894781fdfd3a2a53f3253a595cd287acef2e4536 100644
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
+++ b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
@@ -163,7 +163,7 @@ eNBs =
tr_preference = "raw";
rf_preference = "usrp_b200";
iq_txshift = 4;
- tx_sample_advance = 70;
+ tx_sample_advance = 80;
tx_scheduling_advance = 9;
}
);
@@ -186,4 +186,4 @@ eNBs =
rrc_log_verbosity ="medium";
};
}
-);
+);
\ No newline at end of file
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
deleted file mode 100644
index 3583deb7e392b2ba42733b03a12f6e3cbfb96294..0000000000000000000000000000000000000000
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.local.conf
+++ /dev/null
@@ -1,169 +0,0 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
- ////////// Identification parameters:
- eNB_ID = 0xe00;
-
- cell_type = "CELL_MACRO_ENB";
-
- eNB_name = "eNB_Eurecom_LTEBox";
-
- // Tracking area code, 0x0000 and 0xfffe are reserved values
- tracking_area_code = "1";
-
- mobile_country_code = "208";
- mobile_network_code = "95";
-
- ////////// Physical parameters:
-
- component_carriers = (
- {
- frame_type = "FDD";
- tdd_config = 3;
- tdd_config_s = 0;
- prefix_type = "NORMAL";
- eutra_band = 7;
- downlink_frequency = 2660000000L;
- uplink_frequency_offset = -120000000;
- Nid_cell = 0;
- N_RB_DL = 25;
- Nid_cell_mbsfn = 0;
- nb_antennas_tx = 1;
- nb_antennas_rx = 1;
- tx_gain = 90;
- rx_gain = 125;
- prach_root = 0;
- prach_config_index = 0;
- prach_high_speed = "DISABLE";
- prach_zero_correlation = 1;
- prach_freq_offset = 2;
- pucch_delta_shift = 1;
- pucch_nRB_CQI = 1;
- pucch_nCS_AN = 0;
- pucch_n1_AN = 32;
- pdsch_referenceSignalPower = -26;
- pdsch_p_b = 0;
- pusch_n_SB = 1;
- pusch_enable64QAM = "DISABLE";
- pusch_hoppingMode = "interSubFrame";
- pusch_hoppingOffset = 0;
- pusch_groupHoppingEnabled = "ENABLE";
- pusch_groupAssignment = 0;
- pusch_sequenceHoppingEnabled = "DISABLE";
- pusch_nDMRS1 = 1;
- phich_duration = "NORMAL";
- phich_resource = "ONESIXTH";
- srs_enable = "DISABLE";
- /* srs_BandwidthConfig =;
- srs_SubframeConfig =;
- srs_ackNackST =;
- srs_MaxUpPts =;*/
-
- pusch_p0_Nominal = -90;
- pusch_alpha = "AL1";
- pucch_p0_Nominal = -108;
- msg3_delta_Preamble = 6;
- pucch_deltaF_Format1 = "deltaF2";
- pucch_deltaF_Format1b = "deltaF3";
- pucch_deltaF_Format2 = "deltaF0";
- pucch_deltaF_Format2a = "deltaF0";
- pucch_deltaF_Format2b = "deltaF0";
-
- rach_numberOfRA_Preambles = 64;
- rach_preamblesGroupAConfig = "DISABLE";
- /*
- rach_sizeOfRA_PreamblesGroupA = ;
- rach_messageSizeGroupA = ;
- rach_messagePowerOffsetGroupB = ;
- */
- rach_powerRampingStep = 4;
- rach_preambleInitialReceivedTargetPower = -108;
- rach_preambleTransMax = 10;
- rach_raResponseWindowSize = 10;
- rach_macContentionResolutionTimer = 48;
- rach_maxHARQ_Msg3Tx = 4;
-
- pcch_default_PagingCycle = 128;
- pcch_nB = "oneT";
- bcch_modificationPeriodCoeff = 2;
- ue_TimersAndConstants_t300 = 1000;
- ue_TimersAndConstants_t301 = 1000;
- ue_TimersAndConstants_t310 = 1000;
- ue_TimersAndConstants_t311 = 10000;
- ue_TimersAndConstants_n310 = 20;
- ue_TimersAndConstants_n311 = 1;
- }
- );
-
-
- srb1_parameters :
- {
- # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
- timer_poll_retransmit = 80;
-
- # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
- timer_reordering = 35;
-
- # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
- timer_status_prohibit = 0;
-
- # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
- poll_pdu = 4;
-
- # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
- poll_byte = 99999;
-
- # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
- max_retx_threshold = 4;
- }
-
- # ------- SCTP definitions
- SCTP :
- {
- # Number of streams to use in input/output
- SCTP_INSTREAMS = 2;
- SCTP_OUTSTREAMS = 2;
- };
-
- ////////// MME parameters:
- mme_ip_address = ( { ipv4 = "192.170.0.1";
- ipv6 = "192:168:30::17";
- active = "yes";
- preference = "ipv4";
- }
- );
-
- NETWORK_INTERFACES :
- {
- ENB_INTERFACE_NAME_FOR_S1_MME = "eth0:3";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "192.170.0.2/24";
-
- ENB_INTERFACE_NAME_FOR_S1U = "eth0:4";
- ENB_IPV4_ADDRESS_FOR_S1U = "192.170.1.2/24";
- ENB_PORT_FOR_S1U = 2152; # Spec 2152
- };
-
- log_config :
- {
- global_log_level ="debug";
- global_log_verbosity ="medium";
- hw_log_level ="info";
- hw_log_verbosity ="medium";
- phy_log_level ="info";
- phy_log_verbosity ="medium";
- mac_log_level ="info";
- mac_log_verbosity ="high";
- rlc_log_level ="info";
- rlc_log_verbosity ="medium";
- pdcp_log_level ="info";
- pdcp_log_verbosity ="medium";
- rrc_log_level ="info";
- rrc_log_verbosity ="medium";
- };
-
- }
-);
\ No newline at end of file
diff --git a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf b/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
deleted file mode 100644
index 83b08cb4e0b50a409a26315331323627854b78ae..0000000000000000000000000000000000000000
--- a/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.epc.remote.conf
+++ /dev/null
@@ -1,167 +0,0 @@
-Active_eNBs = ( "eNB_Eurecom_LTEBox");
-# Asn1_verbosity, choice in: none, info, annoying
-Asn1_verbosity = "none";
-
-eNBs =
-(
- {
- ////////// Identification parameters:
- eNB_ID = 0xe00;
-
- cell_type = "CELL_MACRO_ENB";
-
- eNB_name = "eNB_Eurecom_LTEBox";
-
- // Tracking area code, 0x0000 and 0xfffe are reserved values
- tracking_area_code = "1";
-
- mobile_country_code = "208";
- mobile_network_code = "92";
-
- ////////// Physical parameters:
-
- component_carriers = (
- {
- frame_type = "FDD";
- tdd_config = 3;
- tdd_config_s = 0;
- prefix_type = "NORMAL";
- eutra_band = 7;
- downlink_frequency = 2660000000L;
- uplink_frequency_offset = -120000000;
- Nid_cell = 0;
- N_RB_DL = 25;
- Nid_cell_mbsfn = 0;
- nb_antennas_tx = 1;
- nb_antennas_rx = 1;
- tx_gain = 90;
- rx_gain = 125;
- prach_root = 0;
- prach_config_index = 0;
- prach_high_speed = "DISABLE";
- prach_zero_correlation = 1;
- prach_freq_offset = 2;
- pucch_delta_shift = 1;
- pucch_nRB_CQI = 1;
- pucch_nCS_AN = 0;
- pucch_n1_AN = 32;
- pdsch_referenceSignalPower = -26;
- pdsch_p_b = 0;
- pusch_n_SB = 1;
- pusch_enable64QAM = "DISABLE";
- pusch_hoppingMode = "interSubFrame";
- pusch_hoppingOffset = 0;
- pusch_groupHoppingEnabled = "ENABLE";
- pusch_groupAssignment = 0;
- pusch_sequenceHoppingEnabled = "DISABLE";
- pusch_nDMRS1 = 1;
- phich_duration = "NORMAL";
- phich_resource = "ONESIXTH";
- srs_enable = "DISABLE";
- /* srs_BandwidthConfig =;
- srs_SubframeConfig =;
- srs_ackNackST =;
- srs_MaxUpPts =;*/
-
- pusch_p0_Nominal = -90;
- pusch_alpha = "AL1";
- pucch_p0_Nominal = -108;
- msg3_delta_Preamble = 6;
- pucch_deltaF_Format1 = "deltaF2";
- pucch_deltaF_Format1b = "deltaF3";
- pucch_deltaF_Format2 = "deltaF0";
- pucch_deltaF_Format2a = "deltaF0";
- pucch_deltaF_Format2b = "deltaF0";
-
- rach_numberOfRA_Preambles = 64;
- rach_preamblesGroupAConfig = "DISABLE";
- /*
- rach_sizeOfRA_PreamblesGroupA = ;
- rach_messageSizeGroupA = ;
- rach_messagePowerOffsetGroupB = ;
- */
- rach_powerRampingStep = 4;
- rach_preambleInitialReceivedTargetPower = -108;
- rach_preambleTransMax = 10;
- rach_raResponseWindowSize = 10;
- rach_macContentionResolutionTimer = 48;
- rach_maxHARQ_Msg3Tx = 4;
-
- pcch_default_PagingCycle = 128;
- pcch_nB = "oneT";
- bcch_modificationPeriodCoeff = 2;
- ue_TimersAndConstants_t300 = 1000;
- ue_TimersAndConstants_t301 = 1000;
- ue_TimersAndConstants_t310 = 1000;
- ue_TimersAndConstants_t311 = 10000;
- ue_TimersAndConstants_n310 = 20;
- ue_TimersAndConstants_n311 = 1;
- }
- );
-
-
- srb1_parameters :
- {
- # timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
- timer_poll_retransmit = 80;
-
- # timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
- timer_reordering = 35;
-
- # timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
- timer_status_prohibit = 0;
-
- # poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
- poll_pdu = 4;
-
- # poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
- poll_byte = 99999;
-
- # max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
- max_retx_threshold = 4;
- }
-
- # ------- SCTP definitions
- SCTP :
- {
- # Number of streams to use in input/output
- SCTP_INSTREAMS = 2;
- SCTP_OUTSTREAMS = 2;
- };
-
- ////////// MME parameters:
- mme_ip_address = ( {ipv4 = "192.168.12.170";
- ipv6="192:168:30::17";
- active="yes";
- preference="ipv4";});
-
- NETWORK_INTERFACES :
- {
- ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
- ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.242/24";
-
- ENB_INTERFACE_NAME_FOR_S1U = "eth4";
- ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.242/24";
- ENB_PORT_FOR_S1U = 2152; # Spec 2152
- };
-
- log_config :
- {
- global_log_level ="debug";
- global_log_verbosity ="medium";
- hw_log_level ="info";
- hw_log_verbosity ="medium";
- phy_log_level ="info";
- phy_log_verbosity ="medium";
- mac_log_level ="info";
- mac_log_verbosity ="high";
- rlc_log_level ="info";
- rlc_log_verbosity ="medium";
- pdcp_log_level ="info";
- pdcp_log_verbosity ="medium";
- rrc_log_level ="info";
- rrc_log_verbosity ="medium";
- };
-
- }
-);
diff --git a/targets/RT/USER/Makefile b/targets/RT/USER/Makefile
index c0efdd2f7c5f6e790059a0f04e7d159532d7ec6a..621f30c5f41268f8009ee53646d652dcd3628719 100644
--- a/targets/RT/USER/Makefile
+++ b/targets/RT/USER/Makefile
@@ -8,14 +8,14 @@ include $(OPENAIR_TARGETS)/Makefile.common
KERNEL_VERSION:=$(shell echo `uname -r | cut -d. -f-2`)
KERNEL_TYPE:=$(shell echo `uname -r | cut -d. -f-3 | cut -d- -f3`)
-LOWLATENCY_KERNEL:=$(shell if [ $(KERNEL_TYPE) = "lowlatency" ]; then echo "1" ; else echo "0" ; fi)
+DEADLINE_SCHEDULER_KERNEL:=$(shell if [ $(KERNEL_TYPE) = "lowlatency" ]; then echo "1" ; else echo "0" ; fi)
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc
ifdef EXMIMO
-#ifdef LOWLATENCY # this ifdef is to be removed after the debugging
-ifeq ($(LOWLATENCY_KERNEL),1)
-CFLAGS+=-DLOWLATENCY
+#ifdef DEADLINE_SCHEDULER # this ifdef is to be removed after the debugging
+ifeq ($(DEADLINE_SCHEDULER_KERNEL),1)
+CFLAGS+=-DDEADLINE_SCHEDULER
endif
#endif
endif
@@ -431,7 +431,7 @@ show:
@echo IS_REL10 is $(IS_REL10)
@echo openssl $(OPENSSL_FOUND)
@echo nettle $(NETTLE_FOUND)
- @echo lowlatency kernel: $(LOWLATENCY_KERNEL)
+ @echo lowlatency kernel: $(DEADLINE_SCHEDULER_KERNEL)
beautiful:
astyle --style=gnu -s2 $(SRC)
diff --git a/targets/RT/USER/eNB_transport_IQ.c b/targets/RT/USER/eNB_transport_IQ.c
index acb382386e4ef680414d69a55416498eee5ebb87..86080c2c331bd01eb0254526b4fcf2627240c9ca 100644
--- a/targets/RT/USER/eNB_transport_IQ.c
+++ b/targets/RT/USER/eNB_transport_IQ.c
@@ -254,7 +254,7 @@ void *rrh_eNB_thread(void *arg) {
pthread_mutex_init(&sync_trx_mutex,NULL);
/* create eNB module's TX/RX threads */
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
error_code_eNB_rx = pthread_create(&eNB_rx_thread, NULL, rrh_eNB_rx_thread, (void *)dev);
error_code_eNB_tx = pthread_create(&eNB_tx_thread, NULL, rrh_eNB_tx_thread, (void *)dev);
LOG_I(RRH,"[eNB][SCHED] deadline scheduling applied to eNB TX/RX threads\n");
@@ -302,7 +302,7 @@ void *rrh_eNB_thread(void *arg) {
timerspec.it_interval.tv_nsec = rt_period%1000000000;
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
error_code_timer = pthread_create(&main_timer_proc_thread, NULL, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[eNB][SCHED] deadline scheduling applied to timer thread \n");
#else
@@ -368,7 +368,7 @@ void *rrh_eNB_rx_thread(void *arg) {
measurements = dev->measurements;
next_rx_pos = spp_eth;
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
unsigned int flags = 0;
@@ -560,7 +560,7 @@ void *rrh_eNB_tx_thread(void *arg) {
unsigned int subframe=0,frame=0;
unsigned int pck_tx=0;
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
unsigned int flags = 0;
diff --git a/targets/RT/USER/lte-enb.c b/targets/RT/USER/lte-enb.c
index 373a13e1503e98d46cebcdf3c46c1f33325790fa..5275bb43bd41a647cfdcae3fef411cf876f5bb80 100644
--- a/targets/RT/USER/lte-enb.c
+++ b/targets/RT/USER/lte-enb.c
@@ -312,8 +312,9 @@ static void* eNB_thread_rxtx( void* param )
MSC_START_USE();
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
+
unsigned int flags = 0;
uint64_t runtime = 850000 ;
uint64_t deadline = 1 * 1000000 ; // each tx thread will finish within 1ms
@@ -554,7 +555,7 @@ static void* eNB_thread_rxtx( void* param )
}
stop_meas( &softmodem_stats_rxtx_sf );
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
if (opp_enabled){
if(softmodem_stats_rxtx_sf.diff_now/(cpuf) > attr.sched_runtime){
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RUNTIME_TX_ENB, (softmodem_stats_rxtx_sf.diff_now/cpuf - attr.sched_runtime)/1000000.0);
@@ -625,7 +626,7 @@ static void* eNB_thread_rx_common( void* param )
MSC_START_USE();
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
unsigned int flags = 0;
uint64_t runtime = 870000 ;
@@ -722,7 +723,7 @@ static void* eNB_thread_rx_common( void* param )
sparam.sched_priority, cpu_affinity);
-#endif // LOWLATENCY
+#endif // DEADLINE_SCHEDULER
mlockall(MCL_CURRENT | MCL_FUTURE);
@@ -802,13 +803,13 @@ static void* eNB_thread_rx_common( void* param )
}
stop_meas( &softmodem_stats_rxtx_sf );
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
if (opp_enabled){
if(softmodem_stats_rxtx_sf.diff_now/(cpuf) > attr.sched_runtime){
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RUNTIME_RXTX_ENB, (softmodem_stats_rxtx_sf.diff_now/cpuf - attr.sched_runtime)/1000000.0);
}
}
-#endif // LOWLATENCY
+#endif // DEADLINE_SCHEDULER
print_meas_now(&softmodem_stats_rx_sf,"eNB_RX_SF", rx_time_file);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_PROC_RXTX0+(proc->subframe_rx&1), 0 );
@@ -843,7 +844,7 @@ static void* eNB_thread_prach( void* param )
MSC_START_USE();
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
unsigned int flags = 0;
uint64_t runtime = 870000 ;
@@ -940,7 +941,7 @@ static void* eNB_thread_prach( void* param )
sparam.sched_priority, cpu_affinity);
-#endif // LOWLATENCY
+#endif // DEADLINE_SCHEDULER
mlockall(MCL_CURRENT | MCL_FUTURE);
@@ -1012,7 +1013,7 @@ void init_eNB_proc(void)
proc = &eNB->proc;
proc_rxtx = proc->proc_rxtx;
-#ifndef LOWLATENCY
+#ifndef DEADLINE_SCHEDULER
/*
pthread_attr_init( &attr_eNB_proc_tx[CC_id][i] );
if (pthread_attr_setstacksize( &attr_eNB_proc_tx[CC_id][i], 64 *PTHREAD_STACK_MIN ) != 0)
@@ -1053,7 +1054,7 @@ void init_eNB_proc(void)
pthread_cond_init( &proc_rxtx[0].cond_rxtx, NULL);
pthread_cond_init( &proc_rxtx[1].cond_rxtx, NULL);
pthread_cond_init( &proc->cond_prach, NULL);
-#ifndef LOWLATENCY
+#ifndef DEADLINE_SCHEDULER
pthread_create( &proc_rxtx[0].pthread_rxtx, &proc_rxtx[0].attr_rxtx, eNB_thread_rxtx, &proc_rxtx[0] );
pthread_create( &proc_rxtx[1].pthread_rxtx, &proc_rxtx[1].attr_rxtx, eNB_thread_rxtx, &proc_rxtx[1] );
pthread_create( &proc->pthread_rx, &proc->attr_rx, eNB_thread_rx_common, &eNB->proc );
diff --git a/targets/RT/USER/lte-softmodem.c b/targets/RT/USER/lte-softmodem.c
index c92f28b3325b47fb605d3ee5b13aaf4eeea2055e..9f3655f02ed27bdca39eaea8935cf5df3ab2ff09 100644
--- a/targets/RT/USER/lte-softmodem.c
+++ b/targets/RT/USER/lte-softmodem.c
@@ -147,7 +147,6 @@ int sync_var=-1; //!< protected by mutex \ref sync_mutex.
-
#ifdef XFORMS
static pthread_t forms_thread; //xforms
#endif
@@ -634,11 +633,6 @@ void *l2l1_task(void *arg)
-
-
-
-
-
static void get_options (int argc, char **argv)
{
int c;
@@ -1539,7 +1533,7 @@ int main( int argc, char **argv )
}
-#ifndef LOWLATENCY
+#ifndef DEADLINE_SCHEDULER
/* Currently we set affinity for UHD to CPU 0 for eNB/UE and only if number of CPUS >2 */
@@ -1808,7 +1802,6 @@ int main( int argc, char **argv )
-
// start the main thread
if (UE_flag == 1) init_UE();
else init_eNB(node_function);
diff --git a/targets/RT/USER/lte-ue.c b/targets/RT/USER/lte-ue.c
index 1fc30885984aeea5737c743b94366b4254b020eb..991438d4d5cb2e24fe6446d2bb441d52f0f8f2db 100644
--- a/targets/RT/USER/lte-ue.c
+++ b/targets/RT/USER/lte-ue.c
@@ -226,7 +226,7 @@ static void *UE_thread_synch(void *arg)
printf("UE_thread_sync in with PHY_vars_UE %p\n",arg);
printf("waiting for sync (UE_thread_synch) \n");
-#ifndef LOWLATENCY
+#ifndef DEADLINE_SCHEDULER
int policy, s, j;
struct sched_param sparam;
char cpu_affinity[1024];
@@ -666,7 +666,8 @@ static void *UE_thread_tx(void *arg)
UE->instance_cnt_tx=-1;
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
+
struct sched_attr attr;
unsigned int flags = 0;
@@ -873,7 +874,9 @@ static void *UE_thread_rx(void *arg)
UE->instance_cnt_rx=-1;
-#ifdef LOWLATENCY
+
+#ifdef DEADLINE_SCHEDULER
+
struct sched_attr attr;
unsigned int flags = 0;
@@ -1179,7 +1182,8 @@ void *UE_thread(void *arg)
MessageDef *message_p;
#endif
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
+
struct sched_attr attr;
unsigned int flags = 0;
@@ -1535,7 +1539,6 @@ void *UE_thread(void *arg)
-
/*!
* \brief Initialize the UE theads.
* Creates the UE threads:
diff --git a/targets/RT/USER/rrh_gw.c b/targets/RT/USER/rrh_gw.c
index 8084644b853e0b538968bedba3d40f625824344b..4fd687a3a568aa656e58b96e052f27b1b223a37d 100644
--- a/targets/RT/USER/rrh_gw.c
+++ b/targets/RT/USER/rrh_gw.c
@@ -387,7 +387,7 @@ void *timer_proc(void *arg) {
struct itimerspec *old_value;
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
struct sched_attr attr;
unsigned int flags = 0;
diff --git a/targets/RT/USER/rt_wrapper.c b/targets/RT/USER/rt_wrapper.c
index a011cf8dfe83288be1fed972723c29e8d73fc643..ed9eb4e79833152366c9dbc2109afd1437589b86 100644
--- a/targets/RT/USER/rt_wrapper.c
+++ b/targets/RT/USER/rt_wrapper.c
@@ -28,7 +28,7 @@
*******************************************************************************/
/*! \file rt_wrapper.h
-* \brief provides a wrapper for the timing function, runtime calculations for real-time opeartions depending on weather RTAI or LOWLATENCY kernels are used or not
+* \brief provides a wrapper for the timing function, runtime calculations for real-time opeartions depending on weather RTAI or DEADLINE_SCHEDULER kernels are used or not
* \author F. Kaltenberger and Navid Nikaein
* \date 2013
* \version 0.1
@@ -241,7 +241,7 @@ double get_runtime_rx(int rx_subframe, uint16_t runtime_phy_rx[29][6], uint32_t
return runtime;
}
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
int sched_setattr(pid_t pid, const struct sched_attr *attr, unsigned int flags)
{
diff --git a/targets/RT/USER/rt_wrapper.h b/targets/RT/USER/rt_wrapper.h
index 88a3d96efa88f70246146fd0279a3b39c103242e..d67632054b7ee2a14f7c555b7d509452d1851bba 100644
--- a/targets/RT/USER/rt_wrapper.h
+++ b/targets/RT/USER/rt_wrapper.h
@@ -72,7 +72,7 @@ double get_runtime_rx(int rx_subframe, uint16_t runtime_phy_rx[29][6], uint32_t
* see https://www.kernel.org/doc/Documentation/scheduler/sched-deadline.txt or
* http://www.blaess.fr/christophe/2014/04/05/utiliser-un-appel-systeme-inconnu-de-la-libc/
*/
-#ifdef LOWLATENCY
+#ifdef DEADLINE_SCHEDULER
#define gettid() syscall(__NR_gettid)
diff --git a/targets/SIMU/USER/oaisim.c b/targets/SIMU/USER/oaisim.c
index 7c335fdd108d97ecf95e36125b80d983f5fcd3c1..e75c0e1f060c8217d8ac6b9e867886df95ad8746 100644
--- a/targets/SIMU/USER/oaisim.c
+++ b/targets/SIMU/USER/oaisim.c
@@ -608,8 +608,9 @@ l2l1_task (void *args_p)
start_meas (&oaisim_stats);
for (frame = 0;
- (l2l1_state != L2L1_TERMINATED)
- && (frame < oai_emulation.info.n_frames);
+ (l2l1_state != L2L1_TERMINATED) &&
+ ((oai_emulation.info.n_frames_flag == 0) ||
+ (frame < oai_emulation.info.n_frames));
frame++) {
#if defined(ENABLE_ITTI)
@@ -671,12 +672,6 @@ l2l1_task (void *args_p)
//oai_emulation.info.time_ms += 1;
oai_emulation.info.time_s += 0.01; // emu time in s, each frame lasts for 10 ms // JNote: TODO check the coherency of the time and frame (I corrected it to 10 (instead of 0.01)
- // if n_frames not set by the user or is greater than max num frame then set adjust the frame counter
- if ((oai_emulation.info.n_frames_flag == 0)
- || (oai_emulation.info.n_frames >= 0xffff)) {
- frame %= (oai_emulation.info.n_frames - 1);
- }
-
update_omg (frame); // frequency is defined in the omg_global params configurable by the user
update_omg_ocm ();
@@ -708,7 +703,7 @@ l2l1_task (void *args_p)
wait_for_slot_isr ();
#if defined(ENABLE_ITTI)
- itti_update_lte_time(frame, slot);
+ itti_update_lte_time(frame % MAX_FRAME_NUMBER, slot);
#endif
last_slot = (slot - 1) % 20;
@@ -748,7 +743,7 @@ l2l1_task (void *args_p)
LOG_D(EMU,
"PHY procedures eNB %d for frame %d, slot %d (subframe TX %d, RX %d) TDD %d/%d Nid_cell %d\n",
eNB_inst,
- frame,
+ frame % MAX_FRAME_NUMBER,
slot,
PHY_vars_eNB_g[eNB_inst][0]->proc[slot >> 1].subframe_tx,
PHY_vars_eNB_g[eNB_inst][0]->proc[slot >> 1].subframe_rx,
@@ -823,27 +818,27 @@ l2l1_task (void *args_p)
{
LOG_D(EMU,
"PHY procedures UE %d for frame %d, slot %d (subframe TX %d, RX %d)\n",
- UE_inst, frame, slot, next_slot >> 1,
+ UE_inst, frame % MAX_FRAME_NUMBER, slot, next_slot >> 1,
last_slot >> 1);
if (PHY_vars_UE_g[UE_inst][0]->UE_mode[0]
!= NOT_SYNCHED) {
if (frame > 0) {
- PHY_vars_UE_g[UE_inst][0]->frame_rx = frame;
+ PHY_vars_UE_g[UE_inst][0]->frame_rx = frame % MAX_FRAME_NUMBER;
PHY_vars_UE_g[UE_inst][0]->slot_rx = last_slot;
PHY_vars_UE_g[UE_inst][0]->slot_tx = next_slot;
if (next_slot > 1)
- PHY_vars_UE_g[UE_inst][0]->frame_tx = frame;
+ PHY_vars_UE_g[UE_inst][0]->frame_tx = frame % MAX_FRAME_NUMBER;
else
- PHY_vars_UE_g[UE_inst][0]->frame_tx = frame + 1;
+ PHY_vars_UE_g[UE_inst][0]->frame_tx = (frame + 1) % MAX_FRAME_NUMBER;
#ifdef OPENAIR2
//Application
update_otg_UE (UE_inst, oai_emulation.info.time_ms);
//Access layer
- PROTOCOL_CTXT_SET_BY_MODULE_ID(&ctxt, UE_inst, 0, ENB_FLAG_NO, NOT_A_RNTI, frame, next_slot);
+ PROTOCOL_CTXT_SET_BY_MODULE_ID(&ctxt, UE_inst, 0, ENB_FLAG_NO, NOT_A_RNTI, frame % MAX_FRAME_NUMBER, next_slot);
pdcp_run (&ctxt);
#endif
@@ -895,7 +890,7 @@ l2l1_task (void *args_p)
if(last_slot==2 && frame%10==0) {
if (UE_stats_th[UE_inst]) {
- fprintf(UE_stats_th[UE_inst],"%d %d\n",frame, PHY_vars_UE_g[UE_inst][0]->bitrate[0]/1000);
+ fprintf(UE_stats_th[UE_inst],"%d %d\n",frame % MAX_FRAME_NUMBER, PHY_vars_UE_g[UE_inst][0]->bitrate[0]/1000);
}
}
@@ -929,7 +924,7 @@ l2l1_task (void *args_p)
exit(-1);
}
- PHY_vars_RN_g[RN_id]->frame = frame;
+ PHY_vars_RN_g[RN_id]->frame = frame % MAX_FRAME_NUMBER;
if ( oai_emulation.info.frame_type == 0) {
// RN == UE
@@ -937,12 +932,12 @@ l2l1_task (void *args_p)
if (PHY_vars_UE_g[UE_inst][0]->UE_mode[0] != NOT_SYNCHED) {
LOG_D(EMU,"[RN %d] PHY procedures UE %d for frame %d, slot %d (subframe TX %d, RX %d)\n",
RN_id, UE_inst, frame, slot, next_slot >> 1,last_slot>>1);
- PHY_vars_UE_g[UE_inst][0]->frame_rx = frame;
+ PHY_vars_UE_g[UE_inst][0]->frame_rx = frame % MAX_FRAME_NUMBER;
PHY_vars_UE_g[UE_inst][0]->slot_rx = last_slot;
PHY_vars_UE_g[UE_inst][0]->slot_tx = next_slot;
- if (next_slot>1) PHY_vars_UE_g[UE_inst][0]->frame_tx = frame;
- else PHY_vars_UE_g[UE_inst][0]->frame_tx = frame+1;
+ if (next_slot>1) PHY_vars_UE_g[UE_inst][0]->frame_tx = frame % MAX_FRAME_NUMBER;
+ else PHY_vars_UE_g[UE_inst][0]->frame_tx = (frame+1) % MAX_FRAME_NUMBER;
phy_procedures_UE_lte (PHY_vars_UE_g[UE_inst][0], 0, abstraction_flag,normal_txrx,
r_type, PHY_vars_RN_g[RN_id]);
@@ -953,7 +948,7 @@ l2l1_task (void *args_p)
// RN == eNB
LOG_D(EMU,"[RN %d] PHY procedures eNB %d for frame %d, slot %d (subframe TX %d, RX %d)\n",
- RN_id, eNB_inst, frame, slot, next_slot >> 1,last_slot>>1);
+ RN_id, eNB_inst, frame % MAX_FRAME_NUMBER, slot, next_slot >> 1,last_slot>>1);
phy_procedures_eNB_lte(slot>>1, PHY_vars_eNB_g[eNB_inst], abstraction_flag,
r_type, PHY_vars_RN_g[RN_id]);
} else {
@@ -963,7 +958,7 @@ l2l1_task (void *args_p)
}
#endif
- emu_transport (frame, last_slot, next_slot, direction,
+ emu_transport (frame % MAX_FRAME_NUMBER, last_slot, next_slot, direction,
oai_emulation.info.frame_type[0], ethernet_flag);
if ((direction == SF_DL)
@@ -1009,7 +1004,7 @@ l2l1_task (void *args_p)
enb_data, ue_data, next_slot,
abstraction_flag,
&PHY_vars_eNB_g[0][CC_id]->lte_frame_parms,
- frame, CC_id);
+ frame % MAX_FRAME_NUMBER, CC_id);
}
stop_meas (&ul_chan_stats);
@@ -1078,7 +1073,7 @@ l2l1_task (void *args_p)
next_slot,
abstraction_flag,
&PHY_vars_eNB_g[0][CC_id]->lte_frame_parms,
- frame, CC_id);
+ frame % MAX_FRAME_NUMBER, CC_id);
}
stop_meas (&ul_chan_stats);
@@ -1095,7 +1090,7 @@ l2l1_task (void *args_p)
}
}
- if ((last_slot == 1) && (frame == 0) && (abstraction_flag == 0)
+ if ((last_slot == 1) && ((frame % MAX_FRAME_NUMBER) == 0) && (abstraction_flag == 0)
&& (oai_emulation.info.n_frames == 1)) {
write_output ("dlchan0.m",
@@ -1143,40 +1138,40 @@ l2l1_task (void *args_p)
&&(Channel_Flag==0)
#endif
) {
- sprintf (fname, "UEtxsig%d.m", frame);
- sprintf (vname, "txs%d", frame);
+ sprintf (fname, "UEtxsig%d.m", frame % MAX_FRAME_NUMBER);
+ sprintf (vname, "txs%d", frame % MAX_FRAME_NUMBER);
write_output (fname,
vname,
PHY_vars_UE_g[0][0]->lte_ue_common_vars.txdata[0],
PHY_vars_UE_g[0][0]->lte_frame_parms.samples_per_tti
* 10,
1, 1);
- sprintf (fname, "eNBtxsig%d.m", frame);
- sprintf (vname, "txs%d", frame);
+ sprintf (fname, "eNBtxsig%d.m", frame % MAX_FRAME_NUMBER);
+ sprintf (vname, "txs%d", frame % MAX_FRAME_NUMBER);
write_output (fname,
vname,
PHY_vars_eNB_g[0][0]->lte_eNB_common_vars.txdata[0][0],
PHY_vars_UE_g[0][0]->lte_frame_parms.samples_per_tti
* 10,
1, 1);
- sprintf (fname, "eNBtxsigF%d.m", frame);
- sprintf (vname, "txsF%d", frame);
+ sprintf (fname, "eNBtxsigF%d.m", frame % MAX_FRAME_NUMBER);
+ sprintf (vname, "txsF%d", frame % MAX_FRAME_NUMBER);
write_output (fname,
vname,
PHY_vars_eNB_g[0][0]->lte_eNB_common_vars.txdataF[0][0],
PHY_vars_eNB_g[0][0]->lte_frame_parms.symbols_per_tti
* PHY_vars_eNB_g[0][0]->lte_frame_parms.ofdm_symbol_size,
1, 1);
- sprintf (fname, "UErxsig%d.m", frame);
- sprintf (vname, "rxs%d", frame);
+ sprintf (fname, "UErxsig%d.m", frame % MAX_FRAME_NUMBER);
+ sprintf (vname, "rxs%d", frame % MAX_FRAME_NUMBER);
write_output (fname,
vname,
PHY_vars_UE_g[0][0]->lte_ue_common_vars.rxdata[0],
PHY_vars_UE_g[0][0]->lte_frame_parms.samples_per_tti
* 10,
1, 1);
- sprintf (fname, "eNBrxsig%d.m", frame);
- sprintf (vname, "rxs%d", frame);
+ sprintf (fname, "eNBrxsig%d.m", frame % MAX_FRAME_NUMBER);
+ sprintf (vname, "rxs%d", frame % MAX_FRAME_NUMBER);
write_output (fname,
vname,
PHY_vars_eNB_g[0][0]->lte_eNB_common_vars.rxdata[0][0],
@@ -1209,7 +1204,7 @@ l2l1_task (void *args_p)
#ifdef SMBV
// Rohde&Schwarz SMBV100A vector signal generator
- if ((frame == config_frames[0]) || (frame == config_frames[1]) || (frame == config_frames[2]) || (frame == config_frames[3])) {
+ if ((frame % MAX_FRAME_NUMBER == config_frames[0]) || (frame % MAX_FRAME_NUMBER == config_frames[1]) || (frame % MAX_FRAME_NUMBER == config_frames[2]) || (frame % MAX_FRAME_NUMBER == config_frames[3])) {
smbv_frame_cnt++;
}
@@ -1269,7 +1264,7 @@ main (int argc, char **argv)
int port,Process_Flag=0,wgt,Channel_Flag=0,temp;
#endif
//default parameters
- oai_emulation.info.n_frames = 0xffff; //1024; //10;
+ oai_emulation.info.n_frames = MAX_FRAME_NUMBER; //1024; //10;
oai_emulation.info.n_frames_flag = 0; //fixme
snr_dB = 30;