Commit f4e7c2ae authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files

[Docker] adding OAI LTE RU target build in a container image


Signed-off-by: Raphael Defosseux's avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent c19ba39e
......@@ -150,6 +150,8 @@ class Containerize():
imageNames.append(('oai-nr-ue', 'nrUE'))
if self.host == 'Red Hat':
imageNames.append(('oai-physim', 'phySim'))
if self.host == 'Ubuntu':
imageNames.append(('oai-lte-ru', 'lteRU'))
if len(imageNames) == 0:
imageNames.append(('oai-enb', 'eNB'))
......
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for RHEL8
#
#---------------------------------------------------------------------
FROM ran-build:latest AS ru-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --RU --ninja -w USRP --verbose-ci
RUN yum install -y python3-pip && \
pip3 install --ignore-installed pyyaml && \
python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
#start from scratch for target executable
FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ru
ENV TZ=Europe/Paris
RUN yum update -y && \
yum install -y --enablerepo="ubi-8-codeready-builder" \
tzdata \
atlas \
net-tools \
iputils \
iproute && \
echo "/usr/local/lib" > /etc/ld.so.conf.d/local-lib.conf && \
echo "/usr/local/lib64" >> /etc/ld.so.conf.d/local-lib.conf
WORKDIR /opt/oai-lte-ru/bin
COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
WORKDIR /usr/local/lib/
COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
# Copying from the ran-build image the USRP needed packages
COPY --from=ru-build /lib64/libconfig.so.9 /lib64
COPY --from=ru-build /lib64/libblas.so.3 /lib64
COPY --from=ru-build /lib64/liblapack.so.3 /lib64
COPY --from=ru-build /lib64/liblapacke.so.3 /lib64
COPY --from=ru-build /lib64/libboost_chrono.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_date_time.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_filesystem.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_program_options.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_serialization.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_thread.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_system.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_unit_test_framework.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_atomic.so.1.66.0 /lib64
COPY --from=ru-build /lib64/libboost_timer.so.1.66.0 /lib64
COPY --from=ru-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
/bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
/bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
ldconfig
# Copy the relevant configuration files for RRU
WORKDIR /opt/oai-lte-ru/etc
COPY --from=ru-build /oai-ran/docker/etc/rru* ./
WORKDIR /opt/oai-lte-ru
ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
#---------------------------------------------------------------------
#
# Dockerfile for the Open-Air-Interface BUILD service
# Valid for Ubuntu 18.04
#
#---------------------------------------------------------------------
FROM ran-build:latest AS ru-build
RUN rm -Rf /oai-ran
WORKDIR /oai-ran
COPY . .
#run build_oai to build the target image
RUN /bin/sh oaienv && \
cd cmake_targets && \
mkdir -p log && \
./build_oai --RU --ninja -w USRP --verbose-ci
RUN apt-get install -y python3-pip && \
pip3 install --ignore-installed pyyaml && \
python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
#start from scratch for target executable
FROM ubuntu:bionic as oai-lte-ru
ENV DEBIAN_FRONTEND=noninteractive
ENV TZ=Europe/Paris
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get upgrade --yes && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
tzdata \
software-properties-common \
libblas3 \
libatlas3-base \
libconfig9 \
net-tools \
iputils-ping \
iproute2 && \
# Install UHD driver from ettus ppa
# At time of writing, it is 3.14
add-apt-repository ppa:ettusresearch/uhd --yes && \
apt-get update && \
DEBIAN_FRONTEND=noninteractive apt-get install --yes \
python \
libusb-1.0-0 \
libuhd003 \
uhd-host && \
rm -rf /var/lib/apt/lists/*
WORKDIR /opt/oai-lte-ru/bin
COPY --from=ru-build /oai-ran/targets/bin/oairu.Rel15 .
COPY --from=ru-build /oai-ran/docker/scripts/lte_ru_entrypoint.sh entrypoint.sh
WORKDIR /usr/local/lib/
COPY --from=ru-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libtcp_bridge_oai.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/librfsimulator.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/liboai_usrpdevif.so.Rel15 .
COPY --from=ru-build /oai-ran/targets/bin/libparams_libconfig.so .
COPY --from=ru-build /oai-ran/cmake_targets/ran_build/build/libdfts.so .
RUN /bin/bash -c "ln -s /usr/local/lib/liboai_eth_transpro.so.Rel15 /usr/local/lib/liboai_transpro.so" && \
/bin/bash -c "ln -s /usr/local/lib/liboai_usrpdevif.so.Rel15 /usr/local/lib/liboai_device.so" && \
/bin/bash -c "ln -s /usr/local/lib/librfsimulator.so.Rel15 /usr/local/lib/librfsimulator.so" && \
ldconfig
# Copy the relevant configuration files for RRU
WORKDIR /opt/oai-lte-ru/etc
COPY --from=ru-build /oai-ran/docker/etc/rru* ./
WORKDIR /opt/oai-lte-ru
ENTRYPOINT ["/opt/oai-lte-ru/bin/entrypoint.sh"]
CMD ["/opt/oai-lte-ru/bin/oairu.Rel15", "-O", "/opt/oai-lte-ru/etc/rru.conf"]
#!/bin/bash
set -euo pipefail
PREFIX=/opt/oai-lte-ru
# Based another env var, pick one template to use
if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/rru.conf; fi
if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/rru.conf; fi
# Only this template will be manipulated
CONFIG_FILES=`ls $PREFIX/etc/rru.conf || true`
for c in ${CONFIG_FILES}; do
# grep variable names (format: ${VAR}) from template to be rendered
VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
# create sed expressions for substituting each occurrence of ${VAR}
# with the value of the environment variable "VAR"
EXPRESSIONS=""
for v in ${VARS}; do
NEW_VAR=`echo $v | sed -e "s#@##g"`
if [[ "${!NEW_VAR}x" == "x" ]]; then
echo "Error: Environment variable '${NEW_VAR}' is not set." \
"Config file '$(basename $c)' requires all of $VARS."
exit 1
fi
EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
done
EXPRESSIONS="${EXPRESSIONS#';'}"
# render template and inline replace config file
sed -i "${EXPRESSIONS}" ${c}
done
# Load the USRP binaries
if [[ -v USE_B2XX ]]; then
/usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
elif [[ -v USE_X3XX ]]; then
/usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
elif [[ -v USE_N3XX ]]; then
/usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
fi
echo "=================================="
echo "== Starting eNB soft modem"
if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
new_args=()
while [[ $# -gt 0 ]]; do
new_args+=("$1")
shift
done
for word in ${USE_ADDITIONAL_OPTIONS}; do
new_args+=("$word")
done
echo "${new_args[@]}"
exec "${new_args[@]}"
else
echo "$@"
exec "$@"
fi
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment