Commit 56655890 authored by nguimfac's avatar nguimfac

initial commit:README

parent 209af38a
SEMESTER PROJECT
Title: Porting Avatar to the Sidekick Basic kit for LinkIt ONE and fernvale,
the project is divided into two directories (fernvale linkit) for each device,
each directory should contain the required configure files for linkit ONE and fernvale
This diff is collapsed.
source [find interface/jlink.cfg] #mod enable the jlink debbug interface
#mod source [find interface/ftdi/olimex-arm-usb-ocd-h.cfg] #mod for olimex inteface
#mod interface ft2232
#mod ft2232_layout axm0432_jtag
#mod ft2232_vid_pid 0x0403 0x6010
# Change the default telnet port...
telnet_port 4444
# GDB connects here
gdb_port 3333
# GDB can also flash my flash!
#gdb_memory_map enable
#gdb_flash_program enable
source [find bitsbytes.tcl]
source [find cpu/arm/arm966.tcl] #mod ****
#mod source [find cpu/arm/arm7tdmi.tcl]
source [find memory.tcl]
source [find mmr_helpers.tcl]
set CHIP_MAKER mediatek # freescale #mod not sure about that
set CHIP_FAMILY mt2502a # mc1322x #mod not sure
set CHIP_NAME mt2502a # mc13224 #mod not sure
set N_RAM 1
set RAM(0,BASE) 0x00400000
set RAM(0,LEN) 0x18000
set RAM(0,HUMAN) "internal SRAM"
set RAM(0,TYPE) "ram"
set RAM(0,RWX) $RWX_RWX
set RAM(0,ACCESS_WIDTH) $ACCESS_WIDTH_ANY
# I AM LAZY... I create 1 region for all MMRs.
set N_MMREGS 1
set MMREGS(0,CHIPSELECT) -1
set MMREGS(0,BASE) 0x80000000
set MMREGS(0,LEN) 0x00030000
set MMREGS(0,HUMAN) "mm-regs"
set MMREGS(0,TYPE) "mmr"
set MMREGS(0,RWX) $RWX_RW
set MMREGS(0,ACCESS_WIDTH) $ACCESS_WIDTH_ANY
set N_XMEM 0
#
######################
# Target configuration
######################
#
set _CHIPNAME mt2502a
set _ENDIAN little
set _CPUTAPID 0x17700f0f #mod 0x1f1f001d
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x01 -irmask 0x0f -expected-id $_CPUTAPID
#jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x01 -irmask 0x03 -expected-id $_CPUTAPID # from my own file
# reset_config trst_and_srst separate # from my own file
reset_config srst_only
jtag_ntrst_delay 200
#jtag_rclk 0
#mod adapter_khz 2000
adapter_khz 2
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm966 -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966
#mod target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
#$_TARGETNAME -variant arm7tdmi
#$_TARGETNAME configure -event reset-init {
# sleep 100
# soft_reset_halt
# mww 0x80000018 0x50000000
# mww 0x80000000 0x00000f00
# mww 0x80000008 0x00000e00
# mww 0x80005000 0x00006013
# # mww 0x80005018 0x017f270f
# # mww 0x80005008 0x55
# mww 0x80005018 0x07A9270F
# mww 0x80005008 0x55
# sleep 100
#}
# Internal sram memory
$_TARGETNAME configure -work-area-virt 0x00408000 -work-area-phys 0x00408000 -work-area-size 0x1000 -work-area-backup 1
proc run {file} {
puts "loading $file into location 0x00400000 and executing..."
soft_reset_halt
load_image $file 0x00400000
resume 0x00400000
}
#flash bank mc1322x 0 0 0 0 $_TARGETNAME
$_TARGETNAME configure -event gdb-attach my_attach_proc
$_TARGETNAME configure -event gdb-attach {
echo "gdb attaching..."
halt
#soft_reset_halt
}
#!/bin/sh
# this file is a simple script to run avatar-pandora
# Set the paths the files on the system.
#PYTHONPATH=/home/william/avatar-pandora/avatar-python QEMU_S2E=/home/william/avatar-pandora/s2e-build/qemu-debug/arm-s2e-softmmu/qemu-system-arm QEMU_ARM=/home/william/avatar-pandora/s2e-build/qemu-release/arm-softmmu/qemu-system-arm UBOOT_BINARY=u-boot python3 test_system.py
export PYTHONPATH=/home/william/avatar-pandora/avatar-python
export QEMU_ARM=/home/william/avatar-pandora/s2e-build/qemu-debug/arm-s2e-softmmu/qemu-system-arm
export UBOOT_BINARY=u-boot
export QEMU_S2E=/home/william/avatar-pandora/s2e-build/qemu-debug/arm-s2e-softmmu/qemu-system-arm
python3 qemu_integratorcp_uboot.py
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment