Commit 4c3adcb5 authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files

CI: adding support to start/stop enb/rcc/rru on multiple physical servers


Signed-off-by: Raphael Defosseux's avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 1419720c
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 92; mnc_length = 2; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 1;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 38;
downlink_frequency = 2580000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 50; #25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -104; #-96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96; #-104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "enp129s0f0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "enp129s0f0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR"; #"127.0.0.4/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152\
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_if_name = "enp129s0f0";
local_address = "CI_ENB_IP_ADDR";
remote_address = "CI_RRU1_IP_ADDR";
local_portc = 50002;
remote_portc = 50002;
local_portd = 50003;
remote_portd = 50003;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 20
att_rx = 20;
eNB_instances = [0];
is_slave = "no";
},
{
local_if_name = "enp129s0f0";
local_address = "CI_ENB_IP_ADDR";
remote_address = "CI_RRU2_IP_ADDR";
local_portc = 50010;
remote_portc = 50010;
local_portd = 50011;
remote_portd = 50011;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 20
att_rx = 20;
eNB_instances = [0];
is_slave = "yes";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
RUs = (
{
local_if_name = "enp1s0";
remote_address = "CI_RCC_IP_ADDR";
local_address = "CI_ENB_IP_ADDR";
local_portc = 50002;
remote_portc = 50002;
local_portd = 50003;
remote_portd = 50003;
local_rf = "yes"
tr_preference = "udp_if4p5";
nb_tx = 1;
nb_rx = 1;
max_pdschReferenceSignalPower = -12;
max_rxgain = 100;
bands = [38];
is_slave = "no";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
RUs = (
{
local_if_name = "enp1s0";
remote_address = "CI_RCC_IP_ADDR";
local_address = "CI_ENB_IP_ADDR";
local_portc = 50010;
remote_portc = 50010;
local_portd = 50011;
remote_portd = 50011;
local_rf = "yes"
tr_preference = "udp_if4p5";
nb_tx = 1;
nb_rx = 1;
max_pdschReferenceSignalPower = -12;
max_rxgain = 100;
bands = [38];
is_slave = "yes";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
This diff is collapsed.
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>test-multi-rru-10</htmlTabRef>
<htmlTabName>Test-Multi-RRU-10MHz</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
030111 030112 030113
000001
030211 030212 030213
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>30</idle_sleep_time_in_sec>
</testCase>
<testCase id="030111">
<class>Initialize_eNB</class>
<desc>Initialize RCC (TDD/Band38/10MHz)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band38.tm1.50PRB.multi.rru.conf --noS1</Initialize_eNB_args>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="030112">
<class>Initialize_eNB</class>
<desc>Initialize Master RRU (TDD/Band38/10MHz)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/rru.band38.tm1.master.conf --noS1</Initialize_eNB_args>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
</testCase>
<testCase id="030113">
<class>Initialize_eNB</class>
<desc>Initialize Slave RRU (TDD/Band38/10MHz)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/rru.band38.tm1.slave.conf --noS1</Initialize_eNB_args>
<eNB_instance>2</eNB_instance>
<eNB_serverId>2</eNB_serverId>
</testCase>
<testCase id="030211">
<class>Terminate_eNB</class>
<desc>Terminate RCC</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="030212">
<class>Terminate_eNB</class>
<desc>Terminate Master RRU</desc>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
</testCase>
<testCase id="030213">
<class>Terminate_eNB</class>
<desc>Terminate Slave RRU</desc>
<eNB_instance>2</eNB_instance>
<eNB_serverId>2</eNB_serverId>
</testCase>
</testCaseList>
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment