Commit a404e190 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files

Merge branch 'develop-nr-fixes-2019w23' into 'develop-nr'

Develop nr fixes 2019w23

See merge request oai/openairinterface5g!601
parents e6792d75 7e57a842
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING True )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY True )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME True )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI True)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U True)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD True )
set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False)
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_UE True)
set ( NAS_MME False )
set ( NAS_UE True )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NO_RRM True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR2 True )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PDCP_USE_NETLINK True )
set ( PDCP_MSG_PRINT False )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( RF_BOARD "False" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RRC_DEFAULT_RAB_IS_AM True)
set ( RRC_MSG_PRINT False )
set ( SECU False )
set ( SMBV False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( XER_PRINT False )
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 False )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST False )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False )
set ( ENABLE_USE_CPU_EXECUTION_TIME False )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI True)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE False )
set ( EPC_BUILD True )
set ( EXMIMO_IOT False )
set ( JUMBO_FRAME False )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U True)
set ( LINUX_LIST False )
set ( LINUX False )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD False )
set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_EPC True )
set ( NAS_MME True )
set ( NAS_NETLINK False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NO_RRM False )
set ( OAISIM False )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK False )
set ( OPENAIR2 False )
set ( OPENAIR_LTE False )
set ( PACKAGE_NAME "EPC" )
set ( PDCP_MSG_PRINT False )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM False )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( SECU False )
set ( SMBV False )
set ( TEST_OMG False )
set ( UPDATE_RELEASE_9 True)
set ( UPDATE_RELEASE_10 True)
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( XER_PRINT False )
set ( XFORMS False )
cmake_minimum_required(VERSION 2.8)
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING False )
set ( ENABLE_NEW_MULTICAST True )
set ( ENABLE_RAL False )
set ( ENABLE_SECURITY False )
set ( ENABLE_STANDALONE_EPC False)
set ( ENABLE_USE_CPU_EXECUTION_TIME True )
set ( ENABLE_USE_MME False )
set ( ENABLE_USE_RAW_SOCKET_FOR_SGI False)
set ( ENABLE_VCD_FIFO False )
set ( ENB_MODE True )
set ( EXMIMO_IOT True )
set ( JUMBO_FRAME True )
set ( LARGE_SCALE False )
set ( LINK_ENB_PDCP_TO_GTPV1U False)
set ( LINUX_LIST False )
set ( LINUX True )
set ( LOCALIZATION False )
set ( LOG_NO_THREAD 1 )
set ( DEADLINE_SCHEDULER False )
set ( MAC_CONTEXT 1 )
set ( MAX_NUM_CCs 1 )
set ( MESSAGE_CHART_GENERATOR False )
set ( MESSAGE_CHART_GENERATOR_RLC_MAC False )
set ( MESSAGE_CHART_GENERATOR_PHY False )
set ( MSG_PRINT False )
set ( MU_RECEIVER False )
set ( NAS_ADDRESS_FIX False )
set ( NAS_BUILT_IN_UE False)
set ( NAS_MME False )
set ( NAS_UE False )
set ( NB_ANTENNAS_RX "2" )
set ( NB_ANTENNAS_TX "2" )
set ( NO_RRM True )
set ( OAISIM True )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR2 True )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "oaisim" )
set ( PDCP_USE_NETLINK True )
set ( PDCP_MSG_PRINT False )
set ( PHY_CONTEXT False )
set ( PHY_EMUL False )
set ( PHYSIM True )
set ( RF_BOARD "False" )
set ( RRC_ASN1_VERSION "Rel10" )
set ( RLC_STOP_ON_LOST_PDU False )
set ( RRC_MSG_PRINT False )
set ( SECU False )
set ( SMBV False )
set ( TEST_OMG False )
set ( USE_3GPP_ADDR_AS_LINK_ADDR False )
set ( USE_MME "R10" )
set ( XER_PRINT False )
set ( DEBUG_PHY False )
set ( DEBUG_PHY_PROC False)
set ( DEBUG_DLSCH False)
......@@ -1445,7 +1445,7 @@ static void *ru_thread( void *param ) {
// wakeup all gNB processes waiting for this RU
if (ru->num_gNB>0) wakeup_gNB_L1s(ru);
if(get_thread_parallel_conf() == PARALLEL_SINGLE_THREAD && ru->num_gNB==0) {
if(get_thread_parallel_conf() == PARALLEL_SINGLE_THREAD || ru->num_gNB==0) {
// do TX front-end processing if needed (precoding and/or IDFTs)
if (ru->feptx_prec) ru->feptx_prec(ru,proc->frame_tx,proc->tti_tx);
......
......@@ -976,6 +976,8 @@ int main( int argc, char **argv ) {
exit(-1);
}
openair0_cfg[0].threequarter_fs = threequarter_fs;
#if T_TRACER
T_Config_Init();
#endif
......
#ifndef OPENAIRINTERFACE5G_LIMITS_H_
#define OPENAIRINTERFACE5G_LIMITS_H_
#if 1 /*defined(CBMIMO1) || defined(EXMIMO) || defined(OAI_USRP) || defined(OAI_LMSSDR) || defined(OAI_ADRV9371_ZC706)*/
#define NUMBER_OF_eNB_MAX 1
#define NUMBER_OF_gNB_MAX 1
#define NUMBER_OF_RU_MAX 2
#define NUMBER_OF_NR_RU_MAX 2
#ifndef PHYSIM
#ifndef UE_EXPANSION
#define NUMBER_OF_UE_MAX 16
#define NUMBER_OF_NR_UE_MAX 16
#define NUMBER_OF_CONNECTED_eNB_MAX 3
#define NUMBER_OF_CONNECTED_gNB_MAX 3
#else
#define NUMBER_OF_UE_MAX 256
#define NUMBER_OF_NR_UE_MAX 256
#define NUMBER_OF_CONNECTED_eNB_MAX 1
#define NUMBER_OF_CONNECTED_gNB_MAX 1
#endif
#else
#define NUMBER_OF_UE_MAX 1
#define NUMBER_OF_NR_UE_MAX 1
#define NUMBER_OF_CONNECTED_eNB_MAX 1
#define NUMBER_OF_CONNECTED_gNB_MAX 1
#endif
#else
#define NUMBER_OF_eNB_MAX 7
#define NUMBER_OF_gNB_MAX 7
#define NUMBER_OF_RU_MAX 32
#define NUMBER_OF_NR_RU_MAX 32
#ifndef UE_EXPANSION
#define NUMBER_OF_UE_MAX 20
#define NUMBER_OF_NR_UE_MAX 20
#define NUMBER_OF_CONNECTED_eNB_MAX 3
#define NUMBER_OF_CONNECTED_gNB_MAX 3
#else
#define NUMBER_OF_UE_MAX 256
#define NUMBER_OF_NR_UE_MAX 256
#define NUMBER_OF_CONNECTED_eNB_MAX 1
#define NUMBER_OF_CONNECTED_gNB_MAX 1
#endif
#if defined(STANDALONE) && STANDALONE==1
#undef NUMBER_OF_eNB_MAX
#undef NUMBER_OF_gNB_MAX
#undef NUMBER_OF_UE_MAX
#undef NUMBER_OF_NR_UE_MAX
#undef NUMBER_OF_RU_MAX
#undef NUMBER_OF_NR_RU_MAX
#define NUMBER_OF_eNB_MAX 3
#define NUMBER_OF_gNB_MAX 3
#define NUMBER_OF_UE_MAX 3
#define NUMBER_OF_NR_UE_MAX 3
#define NUMBER_OF_RU_MAX 3
#define NUMBER_OF_NR_RU_MAX 3
#endif
#if defined(LARGE_SCALE) && LARGE_SCALE
#undef NUMBER_OF_eNB_MAX
#undef NUMBER_OF_gNB_MAX
#undef NUMBER_OF_UE_MAX
#undef NUMBER_OF_NR_UE_MAX
#undef NUMBER_OF_CONNECTED_eNB_MAX
#undef NUMBER_OF_CONNECTED_gNB_MAX
#undef NUMBER_OF_RU_MAX
#undef NUMBER_OF_NR_RU_MAX
#define NUMBER_OF_eNB_MAX 2
#define NUMBER_OF_gNB_MAX 2
#define NUMBER_OF_UE_MAX 120
#define NUMBER_OF_NR_UE_MAX 120
#define NUMBER_OF_RU_MAX 16
#define NUMBER_OF_NR_RU_MAX 16
#define NUMBER_OF_CONNECTED_eNB_MAX 1 // to save some memory
#define NUMBER_OF_CONNECTED_gNB_MAX 1
#endif
#endif
#endif /* OPENAIRINTERFACE5G_LIMITS_H_ */
......@@ -6,14 +6,12 @@
# define NUMBER_OF_gNB_MAX 1
# define NUMBER_OF_RU_MAX 2
# define NUMBER_OF_NR_RU_MAX 2
# define NUMBER_OF_NR_DLSCH_MAX 16
# define NUMBER_OF_NR_ULSCH_MAX 16
# ifndef PHYSIM
# ifndef UE_EXPANSION
# define NUMBER_OF_UE_MAX 4
# define NUMBER_OF_NR_UE_MAX 4
# define NUMBER_OF_CONNECTED_eNB_MAX 1
# define NUMBER_OF_CONNECTED_gNB_MAX 1
# define NUMBER_OF_UE_MAX 16
# define NUMBER_OF_NR_UE_MAX 16
# define NUMBER_OF_CONNECTED_eNB_MAX 3
# define NUMBER_OF_CONNECTED_gNB_MAX 3
# else
# define NUMBER_OF_UE_MAX 256
# define NUMBER_OF_NR_UE_MAX 256
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
#ifndef NR_SOFTMODEM_H
#define NR_SOFTMODEM_H
#define _GNU_SOURCE
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include "rt_wrapper.h"
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/sysinfo.h>
#include "rt_wrapper.h"
#include "../../ARCH/COMMON/common_lib.h"
#undef MALLOC
#include "assertions.h"
#include "msc.h"
#include "PHY/types.h"
#include "flexran_agent.h"
#include "PHY/defs_gNB.h"
#if defined(ENABLE_ITTI)
#if defined(ENABLE_USE_MME)
#include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#endif
#endif
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
/***************************************************************************************************************************************/
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
when calling config_get or config_getlist functions */
/*------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters defining UE running mode */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_UEMODEPARAMS_DESC { \
{"calib-ue-rx", CONFIG_HLP_CALUER, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"calib-ue-rx-med", CONFIG_HLP_CALUERM, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"calib-ue-rx-byp", CONFIG_HLP_CALUERB, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"debug-ue-prach", CONFIG_HLP_DBGUEPR, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"no-L2-connect", CONFIG_HLP_NOL2CN, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"calib-prach-tx", CONFIG_HLP_CALPRACH, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"loop-memory", CONFIG_HLP_UELOOP, 0, strptr:&loopfile, defstrval:"iqs.in", TYPE_STRING,0}, \
{"ue-dump-frame", CONFIG_HLP_DUMPFRAME, PARAMFLAG_BOOL, iptr:&dumpframe, defintval:0, TYPE_INT, 0}, \
}
#define CMDLINE_CALIBUERX_IDX 0
#define CMDLINE_CALIBUERXMED_IDX 1
#define CMDLINE_CALIBUERXBYP_IDX 2
#define CMDLINE_DEBUGUEPRACH_IDX 3
#define CMDLINE_NOL2CONNECT_IDX 4
#define CMDLINE_CALIBPRACHTX_IDX 5
#define CMDLINE_MEMLOOP_IDX 6
#define CMDLINE_DUMPMEMORY_IDX 7
/*------------------------------------------------------------------------------------------------------------------------------------------*/
/*--------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters specific to UE */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*--------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_UEPARAMS_DESC { \
{"ue-rxgain", CONFIG_HLP_UERXG, 0, dblptr:&(rx_gain[0][0]), defdblval:0, TYPE_DOUBLE, 0}, \
{"ue-rxgain-off", CONFIG_HLP_UERXGOFF, 0, dblptr:&rx_gain_off, defdblval:0, TYPE_DOUBLE, 0}, \
{"ue-txgain", CONFIG_HLP_UETXG, 0, dblptr:&(tx_gain[0][0]), defdblval:0, TYPE_DOUBLE, 0}, \
{"ue-nb-ant-rx", CONFIG_HLP_UENANTR, 0, u8ptr:&nb_antenna_rx, defuintval:1, TYPE_UINT8, 0}, \
{"ue-nb-ant-tx", CONFIG_HLP_UENANTT, 0, u8ptr:&nb_antenna_tx, defuintval:1, TYPE_UINT8, 0}, \
{"ue-scan-carrier", CONFIG_HLP_UESCAN, PARAMFLAG_BOOL, iptr:&UE_scan_carrier, defintval:0, TYPE_INT, 0}, \
{"ue-max-power", NULL, 0, iptr:&(tx_max_power[0]), defintval:90, TYPE_INT, 0}, \
{"r" , CONFIG_HLP_PRB, 0, u8ptr:&(frame_parms[0]->N_RB_DL), defintval:25, TYPE_UINT8, 0}, \
{"dlsch-demod-shift", CONFIG_HLP_DLSHIFT, 0, iptr:(int32_t *)&dlsch_demod_shift, defintval:0, TYPE_INT, 0}, \
}
#define DEFAULT_DLF 2680000000
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters common to eNodeB and UE */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_PARAMS_DESC { \
{"rf-config-file", CONFIG_HLP_RFCFGF, 0, strptr:(char **)&rf_config_file, defstrval:NULL, TYPE_STRING, sizeof(rf_config_file)}, \
{"ulsch-max-errors", CONFIG_HLP_ULMAXE, 0, uptr:&ULSCH_max_consecutive_errors, defuintval:0, TYPE_UINT, 0}, \
{"phy-test", CONFIG_HLP_PHYTST, PARAMFLAG_BOOL, iptr:&phy_test, defintval:0, TYPE_INT, 0}, \
{"usim-test", CONFIG_HLP_USIM, PARAMFLAG_BOOL, u8ptr:&usim_test, defintval:0, TYPE_UINT8, 0}, \
{"mmapped-dma", CONFIG_HLP_DMAMAP, PARAMFLAG_BOOL, uptr:&mmapped_dma, defintval:0, TYPE_INT, 0}, \
{"external-clock", CONFIG_HLP_EXCCLK, PARAMFLAG_BOOL, uptr:&clock_source, defintval:0, TYPE_INT, 0}, \
{"wait-for-sync", NULL, PARAMFLAG_BOOL, iptr:&wait_for_sync, defintval:0, TYPE_INT, 0}, \
{"single-thread-disable", CONFIG_HLP_NOSNGLT, PARAMFLAG_BOOL, iptr:&single_thread_flag, defintval:1, TYPE_INT, 0}, \
{"A" , CONFIG_HLP_TADV, 0, uptr:&timing_advance, defintval:0, TYPE_UINT, 0}, \
{"C" , CONFIG_HLP_DLF, 0, uptr:&(downlink_frequency[0][0]), defuintval:DEFAULT_DLF, TYPE_UINT, 0}, \
{"a" , CONFIG_HLP_CHOFF, 0, iptr:&chain_offset, defintval:0, TYPE_INT, 0}, \
{"d" , CONFIG_HLP_SOFTS, PARAMFLAG_BOOL, uptr:(uint32_t *)&do_forms, defintval:0, TYPE_INT8, 0}, \
{"E" , CONFIG_HLP_TQFS, PARAMFLAG_BOOL, i8ptr:&threequarter_fs, defintval:0, TYPE_INT8, 0}, \
{"K" , CONFIG_HLP_ITTIL, PARAMFLAG_NOFREE, strptr:&itti_dump_file, defstrval:"/tmp/itti.dump", TYPE_STRING, 0}, \
{"m" , CONFIG_HLP_DLMCS, 0, uptr:&target_dl_mcs, defintval:0, TYPE_UINT, 0}, \
{"t" , CONFIG_HLP_ULMCS, 0, uptr:&target_ul_mcs, defintval:0, TYPE_UINT, 0}, \
{"W" , CONFIG_HLP_L2MONW, 0, strptr:(char **)&in_ip, defstrval:"127.0.0.1", TYPE_STRING, sizeof(in_ip)}, \
{"P" , CONFIG_HLP_L2MONP, 0, strptr:(char **)&in_path, defstrval:"/tmp/oai_opt.pcap", TYPE_STRING, sizeof(in_path)}, \
{"q" , CONFIG_HLP_STMON, PARAMFLAG_BOOL, iptr:&opp_enabled, defintval:0, TYPE_INT, 0}, \
{"S" , CONFIG_HLP_MSLOTS, PARAMFLAG_BOOL, u8ptr:&exit_missed_slots, defintval:1, TYPE_UINT8, 0}, \
{"T" , CONFIG_HLP_TDD, PARAMFLAG_BOOL, iptr:&tddflag, defintval:0, TYPE_INT, 0}, {"numerology" , CONFIG_HLP_NUMEROLOGY, PARAMFLAG_BOOL, iptr:&numerology, defintval:0, TYPE_INT, 0}, \
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, iptr:&emulate_rf, defintval:0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD,0, strptr:(char **)&parallel_config, defstrval:NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT,PARAMFLAG_BOOL, iptr:&nonbiotflag, defintval:0, TYPE_INT, 0} \
}
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
extern int T_port;
extern int T_nowait;
extern int T_dont_fork;
/***************************************************************************************************************************************/
/* */
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint8_t exit_missed_slots;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
#if defined(ENABLE_ITTI)
extern volatile int start_gNB;
#endif
#include "threads_t.h"
extern threads_t threads;
// In nr-gnb.c
extern void init_gNB(int single_thread_flag,int wait_for_sync);
extern void stop_gNB(int);
extern void kill_gNB_proc(int inst);
// In nr-ru.c
extern void init_RU(const char*);
extern void init_RU_proc(RU_t *ru);
extern void stop_RU(int nb_ru);
extern void kill_RU_proc(int inst);
extern void set_function_spec_param(RU_t *ru);
extern void reset_opp_meas(void);
extern void print_opp_meas(void);
extern void init_fep_thread(PHY_VARS_gNB *, pthread_attr_t *);
void init_gNB_afterRU(void);
extern int stop_L1L2(module_id_t gnb_id);
extern int restart_L1L2(module_id_t gnb_id);
#endif
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment