diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index d35de04b122bf77f1de6155557309cdba92413ff..0931a928a02d7fdab22289325647813e336462fa 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -32,8 +32,8 @@ job1:
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $EXTERNAL_SHARE_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$EXTERNAL_SHARE_DIR
- cat $OPENAIR_DIR/cmake_targets/autotests/log/results_autotests.xml
- - exce_log=`egrep -i 'warning|error|critical|exception' $NFS_TEST_RESULTS_DIR/log/python_autotest.log `
- - if [ -n "$exce_log" ]; then echo -e "\e[31mThere are errors in $NFS_TEST_RESULTS_DIR/log/python_autotest.log. Please check the logs\e[0m" ; fi
- - exce_log=`egrep -i 'warning|error|critical|exception' $NFS_TEST_RESULTS_DIR/log/python_autotest_cleanup.log `
- - if [ -n "$exce_log" ]; then echo -e "\e[31mThere are errors in $NFS_TEST_RESULTS_DIR/log/python_autotest_cleanup.log. Please check the logs\e[0m" ; fi
+ - exce_log=`egrep -i 'warning|error|critical|exception' $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log |cat `
+ - if [ -n "$exce_log" ]; then echo -e "\e[31mThere are errors in $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log. Please check the logs\e[0m" ; fi
+ - exce_log=`egrep -i 'warning|error|critical|exception' $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log |cat `
+ - if [ -n "$exce_log" ]; then echo -e "\e[31mThere are errors in $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log. Please check the logs\e[0m" ; fi
diff --git a/cmake_targets/CMakeLists.txt b/cmake_targets/CMakeLists.txt
index c23b0d1a91471d406910790e3c54dddb42dbc9d3..67cc6cfc3a33e7950d88c432817bae1927f526fe 100644
--- a/cmake_targets/CMakeLists.txt
+++ b/cmake_targets/CMakeLists.txt
@@ -1518,7 +1518,7 @@ if (${RF_BOARD} STREQUAL "OAI_USRP")
include_directories(${LIBBOOST_INCLUDE_DIR})
endif (${RF_BOARD} STREQUAL "OAI_USRP")
-pkg_search_module(OPENPGM openpgm-5.1)
+pkg_search_module(OPENPGM openpgm-5.1 openpgm-5.2)
if(NOT ${OPENPGM_FOUND})
message("PACKAGE openpgm-5.1 is required by binaries such as oaisim: will fail later if this target is built")
else()
@@ -1625,7 +1625,7 @@ add_executable(lte-softmodem
${T_SOURCE}
)
-target_link_libraries (lte-softmodem
+target_link_libraries (lte-softmodem -ldl
-Wl,--start-group
RRC_LIB S1AP_LIB S1AP_ENB GTPV1U SECU_CN SECU_OSA UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS L2 ${MSC_LIB} ${RAL_LIB} ${NAS_UE_LIB} ${ITTI_LIB} ${MIH_LIB}
-Wl,--end-group )
@@ -1652,8 +1652,8 @@ add_executable(lte-softmodem-nos1
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
- #${OPENAIR2_DIR}/RRC/NAS/nas_config.c # enable if you want rrc to mount ip interface
- #${OPENAIR2_DIR}/RRC/NAS/rb_config.c
+ ${OPENAIR2_DIR}/RRC/NAS/nas_config.c
+ ${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${HW_SOURCE}
${TRANSPORT_SOURCE}
@@ -1929,6 +1929,11 @@ foreach( d ${DirDefs} )
list(APPEND itti_compiler_options "-I${d}")
endforeach()
+# castxml doesn't work with c11 (gcc 5 default)
+# force castxml and clang compilation with gnu89 standard
+# we can't use cXX standard as pthread_rwlock_t is gnu standard
+list(APPEND itti_compiler_options "-std=gnu89")
+
set (ITTI_H ${ITTI_DIR}/intertask_interface_types.h)
add_custom_command (
OUTPUT ${OPENAIR_BIN_DIR}/messages.xml
diff --git a/cmake_targets/autotests/README.txt b/cmake_targets/autotests/README.txt
index 3ae18133c71fc991c1d7d7efdbc32a0ff843bb86..b04d24c51a530840d6ed775273a7bde4631fd05c 100644
--- a/cmake_targets/autotests/README.txt
+++ b/cmake_targets/autotests/README.txt
@@ -12,10 +12,12 @@ Obj.# Case# Test# Description
01 01 11 Build lte-softmodem_noS1.EXMIMO.Rel10
01 01 12 Build lte-softmodem_noS1.BLADERF.Rel10
01 01 13 Build lte-softmodem_noS1.ETHERNET.Rel10
+01 01 14 Build lte-softmodem_noS1.LMSSDR.Rel10
01 01 20 Build lte-softmodem.USRP.Rel10
01 01 21 Build lte-softmodem.EXMIMO.Rel10
01 01 22 Build lte-softmodem.BLADERF.Rel10
01 01 23 Build lte-softmodem.ETHERNET.Rel10
+01 01 24 Build lte-softmodem.LMSSDR.Rel10
01 01 30 Build (dlsim.Rel10 + ulsim.Rel10 + pucchsim.Rel10 + prachsim.Rel10 + pdcchsim.Rel10 + pbchsim.Rel10 + mbmssim.Rel10
secu_knas_encrypt_eia1.Rel10 secu_kenb.Rel10 aes128_ctr_encrypt.Rel10 aes128_ctr_decrypt.Rel10 secu_knas_encrypt_eea2.Rel10
@@ -24,7 +26,7 @@ Obj.# Case# Test# Description
01 01 40 Build RRH Gateway for USRP (Rel 10)
01 01 41 Build RRH Gateway for EXMIMO (Rel 10)
01 01 42 Build RRH Gateway for BLADERF (Rel 10)
-
+01 01 43 Build RRH Gateway for LMSSDR (Rel 10)
01 02 Run OAISIM-NOS1 Rel10 (TDD + 5MHz/10MHz/20MHz + TM 1,2), and check the operation
diff --git a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
index db14fea40fd477283cefe32892c761dc74eb7451..b25bc08427675a828ffc46edca332512bce57d9f 100755
--- a/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
+++ b/cmake_targets/autotests/run_exec_lte-softmodem_tests.py
@@ -781,7 +781,7 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
task_eNB = task_eNB + 'array_exec_pid+=($!) \n'
task_eNB = task_eNB + 'echo eNB_traffic_exec PID = $! \n'
- task_eNB = task_eNB + ' (date; sudo rm -f ' + logfile_pcap_tmp_eNB + ' ; sudo -E tshark -i any -s 65535 -a duration:' + str(timeout_cmd-10)+ ' -w ' + logfile_pcap_tmp_eNB+ ' ; sudo -E chown ' + user + ' ' + logfile_pcap_tmp_eNB + ' ; zip -j -9 ' + logfile_pcap_zip_eNB + ' ' + logfile_pcap_tmp_eNB + ' ) > ' + logfile_tshark_eNB + ' 2>&1 & \n '
+ task_eNB = task_eNB + ' (date; sudo rm -f ' + logfile_pcap_tmp_eNB + ' ; sudo -E tshark -i lo -s 65535 -a duration:' + str(timeout_cmd-10)+ ' -w ' + logfile_pcap_tmp_eNB+ ' ; sudo -E chown ' + user + ' ' + logfile_pcap_tmp_eNB + ' ; zip -j -9 ' + logfile_pcap_zip_eNB + ' ' + logfile_pcap_tmp_eNB + ' ) > ' + logfile_tshark_eNB + ' 2>&1 & \n '
task_eNB = task_eNB + 'array_exec_pid+=($!) \n'
task_eNB = task_eNB + 'echo eNB_tshark_exec PID = $! \n'
#terminate the eNB test case after timeout_cmd seconds
@@ -1005,7 +1005,21 @@ def handle_testcaseclass_softmodem (testcase, oldprogramList, logdirOAI5GRepo ,
run_result_string = ' RUN_'+str(run) + ' = PASS'
else:
run_result_string = ' RUN_'+str(run) + ' = FAIL'
-
+
+ #If there is assertion, we mark the test case as failure as most likely eNB crashed
+ cmd = "grep -ilr \"assertion\" " + logdir_local_testcase + " | cat "
+ cmd_out = subprocess.check_output ([cmd], shell=True)
+ if len(cmd_out) !=0 :
+ run_result=0
+ run_result_string = ' RUN_'+str(run) + ' = FAIL(Assert)'
+
+ #If there is thread busy error, we mark the test case as failure as most likely eNB crashed
+ cmd = "grep -ilr \"thread busy\" " + logdir_local_testcase + " | cat "
+ cmd_out = subprocess.check_output ([cmd], shell=True)
+ if len(cmd_out) !=0:
+ run_result=0
+ run_result_string = ' RUN_'+str(run) + ' = FAIL(Thread_Busy)'
+
run_result_string = run_result_string + tput_run_string
test_result=test_result & run_result
diff --git a/cmake_targets/autotests/test_case_list.xml b/cmake_targets/autotests/test_case_list.xml
index 8c4024e0732ff01341c892e9174dd38a5531c9bc..c2aae5f88fde730cc148a934311e3b5683369bd8 100644
--- a/cmake_targets/autotests/test_case_list.xml
+++ b/cmake_targets/autotests/test_case_list.xml
@@ -155,6 +155,25 @@
<nruns>1</nruns>
</testCase>
+ <testCase id="010114" >
+ <class>compilation</class>
+ <desc>Build lte_softmodem_noS1.LMSSDR.Rel10</desc>
+ <pre_compile_prog></pre_compile_prog>
+ <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
+ <compile_prog_args>--eNB -w LMSSDR -r Rel10 --noS1 -c </compile_prog_args>
+ <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/lte-softmodem-nos1
+ $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/rb_tool
+ $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/CMakeFiles/nasmesh/nasmesh.ko
+ $OPENAIR_DIR/cmake_targets/lte_noS1_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
+ <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
+ <pre_exec_args></pre_exec_args>
+ <main_exec></main_exec>
+ <main_exec_args></main_exec_args>
+ <search_expr_true></search_expr_true>
+ <search_expr_false></search_expr_false>
+ <tags>lte-softmodem_noS1.LMSSDR.Rel10</tags>
+ <nruns>1</nruns>
+ </testCase>
<testCase id="010120" >
@@ -231,6 +250,24 @@
<nruns>1</nruns>
</testCase>
+ <testCase id="010124" >
+ <class>compilation</class>
+ <desc>Build lte_softmodem.LMSSDR.Rel10</desc>
+ <pre_compile_prog></pre_compile_prog>
+ <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
+ <compile_prog_args>--eNB -w LMSSDR -r Rel10 -c </compile_prog_args>
+ <compile_prog_out>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem
+ $OPENAIR_DIR/cmake_targets/lte_build_oai/build/liboai_lmssdrdevif.so</compile_prog_out>
+ <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
+ <pre_exec_args></pre_exec_args>
+ <main_exec></main_exec>
+ <main_exec_args></main_exec_args>
+ <search_expr_true></search_expr_true>
+ <search_expr_false></search_expr_false>
+ <tags>lte-softmodem.LMSSDR.Rel10</tags>
+ <nruns>1</nruns>
+ </testCase>
+
<testCase id="010130" >
<class>compilation</class>
<desc>Build phy unitary simulators + secuirity unitary tests</desc>
@@ -308,7 +345,7 @@
<testCase id="010142" >
<class>compilation</class>
- <desc>Build RRH Gateway</desc>
+ <desc>Build RRH Gateway for BladeRF (RF) nad Ethernet (transport)</desc>
<pre_compile_prog></pre_compile_prog>
<compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
<compile_prog_args>--RRH -w BLADERF -t ETHERNET -c </compile_prog_args>
@@ -325,6 +362,24 @@
<nruns>1</nruns>
</testCase>
+ <testCase id="010143" >
+ <class>compilation</class>
+ <desc>Build RRH Gateway for LMSSDR (RF) and Ethernet (transport)</desc>
+ <pre_compile_prog></pre_compile_prog>
+ <compile_prog>$OPENAIR_DIR/cmake_targets/build_oai</compile_prog>
+ <compile_prog_args>--RRH -w LMSSDR -t ETHERNET -c </compile_prog_args>
+ <compile_prog_out>$OPENAIR_DIR/cmake_targets/rrh_gw/build/rrh_gw
+ $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_lmssdrdevif.so
+ $OPENAIR_DIR/cmake_targets/rrh_gw/build/liboai_eth_transpro.so</compile_prog_out>
+ <pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</pre_exec>
+ <pre_exec_args></pre_exec_args>
+ <main_exec></main_exec>
+ <main_exec_args></main_exec_args>
+ <search_expr_true></search_expr_true>
+ <search_expr_false></search_expr_false>
+ <tags>RRH.LMSSDR.Rel10</tags>
+ <nruns>1</nruns>
+ </testCase>
<testCase id="010200">
<class>execution</class>
@@ -901,7 +956,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -938,7 +993,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -976,7 +1031,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1013,7 +1068,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -1050,7 +1105,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1087,7 +1142,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -1124,7 +1179,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1139,11 +1194,11 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 17M -R</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 16M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -1197,7 +1252,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1211,9 +1266,9 @@
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 34M -R</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 5 lo -s -i 1 -f m -u </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -1232,7 +1287,7 @@
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 75 lo -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -1270,7 +1325,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1287,7 +1342,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -1345,7 +1400,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1382,7 +1437,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.2TX.2RX</tags>
@@ -1420,7 +1475,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1456,7 +1511,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=2.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=2.0Mbits/sec average=2.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.2TX.2RX</tags>
@@ -1493,7 +1548,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1530,7 +1585,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=4.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=4.0Mbits/sec average=4.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.2TX.2RX</tags>
@@ -1567,7 +1622,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1584,7 +1639,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -1641,7 +1696,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1658,7 +1713,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -1715,7 +1770,7 @@
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1732,7 +1787,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -1791,7 +1846,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1837,7 +1892,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.OAI_EPC_local.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -1875,7 +1930,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -1921,7 +1976,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.OAI_EPC_local.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -1959,7 +2014,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2005,7 +2060,7 @@
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.OAI_EPC_local.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -2043,7 +2098,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2060,7 +2115,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -2127,7 +2182,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2144,7 +2199,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -2211,7 +2266,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth5:3 192.170.0.2 up ; sudo -E ifconfig eth5:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2228,7 +2283,7 @@
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=40.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=42.0Mbits/sec average=44.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -2295,7 +2350,7 @@
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2351,7 +2406,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -2389,7 +2444,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2445,7 +2500,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -2483,7 +2538,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ;sudo -E ifconfig eth0:3 192.170.0.2 up ; sudo -E ifconfig eth0:4 192.170.1.2 up; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2539,7 +2594,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -2577,7 +2632,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2594,7 +2649,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=9.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -2671,7 +2726,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2688,7 +2743,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 10M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=9Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -2765,7 +2820,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; ifconfig ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec> $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2782,7 +2837,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 9M -R </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=9Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9Mbits/sec average=9Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -2857,7 +2912,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2893,7 +2948,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -2929,7 +2984,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -2965,7 +3020,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3000,7 +3055,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3037,7 +3092,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3072,7 +3127,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3087,11 +3142,11 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 17M -R</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 16M -R</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -3143,7 +3198,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3158,11 +3213,11 @@ c
<UE_pre_exec_args></UE_pre_exec_args>
<UE_main_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --stop-ue ; sleep 10; $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --start-ue </UE_main_exec>
<UE_main_exec_args></UE_main_exec_args>
- <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf3_script 1 ppp0 -c 192.172.0.1 -i 1 -u -f m -B 192.172.0.2 -b 35M -R</UE_traffic_exec>
+ <UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -3178,7 +3233,7 @@ c
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf3_script 5 lo -s -i 1 -f m </EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 75 lo -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -3214,7 +3269,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/configure_usrpb210.py --stop-usrpb210 ; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3233,7 +3288,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -3288,7 +3343,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3334,7 +3389,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3371,7 +3426,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3417,7 +3472,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3452,7 +3507,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3498,7 +3553,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPx310.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3533,7 +3588,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3550,7 +3605,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -3614,7 +3669,7 @@ c
<eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args>sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail</eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3631,7 +3686,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue</UE_stop_script>
@@ -3695,7 +3750,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S /usr/local/bin/niusrprio_pcie start ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpx310.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3712,7 +3767,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -3776,7 +3831,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3812,7 +3867,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3848,7 +3903,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3885,7 +3940,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3920,7 +3975,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -3957,7 +4012,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -3992,7 +4047,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4011,7 +4066,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -4063,7 +4118,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4082,7 +4137,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -4134,7 +4189,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4153,7 +4208,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -4207,7 +4262,7 @@ c
<eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4254,7 +4309,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.OAI_EPC_remote.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -4291,7 +4346,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4337,7 +4392,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.OAI_EPC_remote.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -4372,7 +4427,7 @@ c
<eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail ; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4418,7 +4473,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>EXMIMO.OAI_EPC_remote.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -4453,7 +4508,7 @@ c
<eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4470,7 +4525,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.5Mbits/sec average=11.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -4534,7 +4589,7 @@ c
<eNB_pre_exec>sleep 15;$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4551,7 +4606,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue</UE_stop_script>
@@ -4615,7 +4670,7 @@ c
<eNB_pre_exec>sleep 15; $OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash ; sudo -E -S $OPENAIR_DIR/cmake_targets/tools/stop_exmimo2 ; dmesg|tail; cp $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf $OPENAIR_TESTDIR/enb.conf</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.exmimo2.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4632,7 +4687,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=20.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=21.0Mbits/sec average=22.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -4700,7 +4755,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4737,7 +4792,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>BladeRF.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -4776,7 +4831,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4813,7 +4868,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>BladeRF.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -4851,7 +4906,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4888,7 +4943,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>BladeRF.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -4926,7 +4981,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -4945,7 +5000,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -5000,7 +5055,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5016,7 +5071,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -5074,7 +5129,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash </eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.bladerfx40.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5091,7 +5146,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -5149,7 +5204,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5186,7 +5241,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>LMSSDR.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -5225,7 +5280,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5262,7 +5317,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>LMSSDR.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -5300,7 +5355,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_20MHz_rx19dB_txfull.ini </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_20MHz_rx19dB_txfull.ini </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5337,7 +5392,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>LMSSDR.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -5375,7 +5430,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_5MHz_rx19dB_txfull.ini </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5394,7 +5449,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -5449,7 +5504,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini</eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_10MHz_rx19dB_txfull.ini</eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5465,7 +5520,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -5523,7 +5578,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf -W --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_20MHz_rx19dB_txfull.ini</eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.lmssdr.conf --rf-config-file $OPENAIR_DIR/targets/ARCH/LMSSDR/enb_sodera_highband_20MHz_rx19dB_txfull.ini</eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5540,7 +5595,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=15.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=15.0Mbits/sec average=15.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -5600,7 +5655,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5647,7 +5702,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -5688,7 +5743,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5733,7 +5788,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -5773,7 +5828,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5818,7 +5873,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.RRH.ALU_EPC.Bandrich.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -5858,7 +5913,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5885,7 +5940,7 @@ c
<UE_traffic_exec_args></UE_traffic_exec_args>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<EPC_working_dir>/tmp</EPC_working_dir>
@@ -5942,7 +5997,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; sudo -E chrt -f 99 $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -5966,7 +6021,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -6026,7 +6081,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>sleep 5; $OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6051,7 +6106,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script 1 ppp0 -s -i 1 -u -f m -B 192.172.0.2</UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_bandrich_ue.py --reset-ue </UE_stop_script>
@@ -6109,7 +6164,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6146,7 +6201,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=5.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=5.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.SonyExperiaM4.5MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -6184,7 +6239,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6221,7 +6276,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.SonyExperiaM4.10MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -6258,7 +6313,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6295,7 +6350,7 @@ c
<HSS_main_exec_args></HSS_main_exec_args>
<EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 5 lo -s -i 1 -u -f m </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
- <EPC_search_expr_true>throughput_test min=1.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
+ <EPC_search_expr_true>throughput_test min=0.0Mbits/sec max=1.0Mbits/sec average=1.0Mbits/sec </EPC_search_expr_true>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
<tags>USRPb210.ALU_EPC.SonyExperiaM4.20MHz.FDD.Band_7.UL.1TX.1RX</tags>
@@ -6332,7 +6387,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6349,7 +6404,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=4.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=5.0Mbits/sec average=4.0Mbits/sec </UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
@@ -6368,7 +6423,7 @@ c
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 17Mbits/s -i 1 -f m -u</EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 16Mbits/s -i 1 -f m -u</EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -6406,7 +6461,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6423,7 +6478,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=8.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=0.0Mbits/sec max=9.0Mbits/sec average=8.5Mbits/sec</UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
@@ -6442,7 +6497,7 @@ c
<EPC_main_exec_args></EPC_main_exec_args>
<HSS_main_exec>/opt/hss_sim0609/starthss >> /dev/null ; sleep 3000 </HSS_main_exec>
<HSS_main_exec_args></HSS_main_exec_args>
- <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 34Mbits/s -i 1 -f m -u </EPC_traffic_exec>
+ <EPC_traffic_exec>$OPENAIRCN_DIR/TEST/autotests/tools/iperf_script 65 lo -c 192.172.0.2 -b 33Mbits/s -i 1 -f m -u </EPC_traffic_exec>
<EPC_traffic_exec_args></EPC_traffic_exec_args>
<EPC_search_expr_false></EPC_search_expr_false>
<EPC_terminate_missing_procs>False</EPC_terminate_missing_procs>
@@ -6480,7 +6535,7 @@ c
<eNB_pre_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/free_mem.bash</eNB_pre_exec>
<eNB_pre_exec_args></eNB_pre_exec_args>
<eNB_main_exec>$OPENAIR_DIR/cmake_targets/lte_build_oai/build/lte-softmodem</eNB_main_exec>
- <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf -W </eNB_main_exec_args>
+ <eNB_main_exec_args> -O $OPENAIR_DIR/targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf </eNB_main_exec_args>
<eNB_traffic_exec></eNB_traffic_exec>
<eNB_traffic_exec_args></eNB_traffic_exec_args>
<eNB_search_expr_true></eNB_search_expr_true>
@@ -6497,7 +6552,7 @@ c
<UE_main_exec_args></UE_main_exec_args>
<UE_traffic_exec>$OPENAIR_DIR/cmake_targets/autotests/tools/iperf_script_phone 1 YT9115PX1E -s -i 1 -u -f m </UE_traffic_exec>
<UE_traffic_exec_args></UE_traffic_exec_args>
- <UE_search_expr_true>throughput_test min=10.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
+ <UE_search_expr_true>throughput_test min=00.0Mbits/sec max=10.0Mbits/sec average=10.0Mbits/sec</UE_search_expr_true>
<UE_search_expr_false></UE_search_expr_false>
<UE_terminate_missing_procs>False</UE_terminate_missing_procs>
<UE_stop_script>sudo -S -E $OPENAIR_DIR/cmake_targets/autotests/tools/configure_cots_sony_experia_m4_ue.py --stop-ue </UE_stop_script>
diff --git a/cmake_targets/build_oai b/cmake_targets/build_oai
index d1306b804b3073f35c7b30a2bf8d15fbdc816793..04289a83fa0c1b23f233b1aac01e24295cb6e0b1 100755
--- a/cmake_targets/build_oai
+++ b/cmake_targets/build_oai
@@ -33,6 +33,7 @@
# brief OAI automated build tool that can be used to install, compile, run OAI.
# author Navid Nikaein, Lionel GAUTHIER, Laurent Thomas
+set -e
################################
# include helper functions
@@ -59,6 +60,7 @@ RUN_GROUP=0
TEST_CASE_GROUP=""
BUILD_DOXYGEN=0
T_TRACER="False"
+DISABLE_HARDWARE_DEPENDENCY="False"
trap handle_ctrl_c INT
function print_help() {
@@ -131,6 +133,8 @@ Options
Disables CPU Affinity between UHD/TX/RX Threads (Valid only when deadline scheduler is disabled). By defaulT, CPU Affinity is enabled when not using deadline scheduler. It is enabled only with >2 CPUs. For eNB, CPU_0-> Device library (UHD), CPU_1->TX Threads, CPU_2...CPU_MAX->Rx Threads. For UE, CPU_0->Device Library(UHD), CPU_1..CPU_MAX -> All the UE threads
--T-tracer
Enables the T tracer.
+--disable-hardware-dependency
+ Disable HW dependency during installation
Usage (first build):
oaisim (eNB + UE): ./build_oai -I -g --oaisim -x --install-system-files
Eurecom EXMIMO + COTS UE : ./build_oai -I -g --eNB -x --install-system-files
@@ -277,6 +281,10 @@ function main() {
T_TRACER="True"
echo_info "Enabling the T tracer"
shift 1;;
+ --disable-hardware-dependency)
+ echo_info "Disabling hardware dependency for compiling software"
+ DISABLE_HARDWARE_DEPENDENCY="True"
+ shift 1;;
-h | --help)
print_help
exit 1;;
@@ -386,10 +394,16 @@ function main() {
if [ "$HW" == "OAI_USRP" ] ; then
echo_info "installing packages for USRP support"
check_install_usrp_uhd_driver
+ if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
+ install_usrp_uhd_driver
+ fi
fi
if [ "$HW" == "OAI_BLADERF" ] ; then
echo_info "installing packages for BLADERF support"
check_install_bladerf_driver
+ if [ ! "$DISABLE_HARDWARE_DEPENDENCY" == "True" ]; then
+ flash_firmware_bladerf
+ fi
fi
fi
diff --git a/cmake_targets/tools/build_helper b/cmake_targets/tools/build_helper
index f6d0d2b0dbd2932093616bef015910fe78e01d8f..ac8d9f34c1541b115adae88a66e022a1bb8a7eca 100755
--- a/cmake_targets/tools/build_helper
+++ b/cmake_targets/tools/build_helper
@@ -67,7 +67,45 @@ echo_warning() { cecho "$*" $yellow ;}
echo_success() { cecho "$*" $green ;}
echo_info() { cecho "$*" $blue ;}
+########################
+# distribution helpers #
+########################
+
+# This function return a string to identify the distribution we are running
+# If we can't check the distribution, it returns "Unknown"
+# This function return always true as exit code by design
+# Examples:
+# Ubuntu16.04
+# Debian8.5
+get_distribution_release() {
+ local distributor
+ if distributor=$(lsb_release -si 2>/dev/null) ; then
+ echo $distributor$(lsb_release -sr)
+ else
+ echo Unknown
+ fi
+}
+
+check_supported_distribution() {
+ local distribution=$(get_distribution_release)
+ case "$distribution" in
+ "Ubuntu16.04") return 0 ;;
+ "Ubuntu14.04") return 0 ;;
+ esac
+ return 1
+}
+##################
+# Error handlers #
+##################
+
+handler_EXIT() {
+ local exit_code=$?
+ [ "$exit_code" -eq 0 ] || echo_error "build have failed"
+ exit $exit_code
+}
+
+trap handler_EXIT EXIT
###########################
# Cleaners
@@ -109,6 +147,7 @@ clean_all_files() {
compilations() {
cd $OPENAIR_DIR/cmake_targets/$1/build
+ set +e
{
rm -f $3
if [ "$VERBOSE_COMPILE" == "1" ]; then
@@ -118,12 +157,14 @@ compilations() {
fi
} > $dlog/$2.$REL.txt 2>&1
+ set -e
echo_info "Log file for compilation has been written to: $dlog/$2.$REL.txt"
if [ -s $3 ] ; then
cp $3 $4
echo_success "$2 compiled"
else
echo_error "$2 compilation failed"
+ exit 1
fi
}
@@ -186,23 +227,36 @@ install_gnutls_from_source(){
check_install_usrp_uhd_driver(){
#first we remove old installation
- $SUDO apt-get remove uhd libuhd-dev libuhd003 uhd-host -y
+ $SUDO apt-get remove -y uhd || true
+ $SUDO apt-get remove libuhd-dev libuhd003 uhd-host -y
v=$(lsb_release -cs)
$SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
#The new USRP repository
$SUDO add-apt-repository ppa:ettusresearch/uhd -y
$SUDO apt-get update
$SUDO apt-get -y install python python-tk libboost-all-dev libusb-1.0-0-dev
- $SUDO apt-get -y install libuhd-dev libuhd003 uhd-host
+ $SUDO apt-get -y install libuhd-dev libuhd003
+}
+
+install_usrp_uhd_driver() {
+ # We move uhd-host apart because it depends on linux kernel version
+ # On newer kernels, it fails to install
+ $SUDO apt-get -y install uhd-host
$SUDO uhd_images_downloader
}
+
check_install_bladerf_driver(){
- $SUDO add-apt-repository -y ppa:bladerf/bladerf
- $SUDO apt-get update
+ if [ "$(get_distribution_release)" == "Ubuntu14.04" ] ; then
+ $SUDO add-apt-repository -y ppa:bladerf/bladerf
+ $SUDO apt-get update
+ fi
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
- $SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
+}
+
+flash_firmware_bladerf() {
+ $SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
check_install_additional_tools (){
@@ -228,7 +282,10 @@ check_install_additional_tools (){
ctags \
ntpdate \
iperf3 \
- android-tools-adb
+ android-tools-adb \
+ wvdial \
+ python-numpy \
+ sshpass
$SUDO pip install paramiko
$SUDO pip install pyroute2
@@ -248,8 +305,26 @@ check_install_additional_tools (){
}
check_install_oai_software() {
+ local specific_packages=""
+ if ! check_supported_distribution; then
+ echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
+ exit 1
+ fi
$SUDO apt-get update
+ $SUDO apt install -y software-properties-common
+ case "$(get_distribution_release)" in
+ "Ubuntu14.04")
+ specific_packages="libtasn1-3-dev"
+ # For iperf3
+ $SUDO add-apt-repository "deb http://archive.ubuntu.com/ubuntu trusty-backports universe"
+ $SUDO apt-get update
+ ;;
+ "Ubuntu16.04")
+ specific_packages="libtasn1-6-dev"
+ ;;
+ esac
$SUDO apt-get install -y \
+ $specific_packages \
autoconf \
automake \
bison \
@@ -273,9 +348,9 @@ check_install_oai_software() {
iptables-dev \
libatlas-base-dev \
libatlas-dev \
- libblas3gf \
libblas-dev \
libconfig8-dev \
+ libffi-dev \
libforms-bin \
libforms-dev \
libgcrypt11-dev \
@@ -285,16 +360,16 @@ check_install_oai_software() {
libidn11-dev \
libmysqlclient-dev \
liboctave-dev \
- libpgm-5.1 \
libpgm-dev \
+ libpython2.7-dev \
libsctp1 \
libsctp-dev \
libssl-dev \
- libtasn1-3-dev \
libtool \
libusb-1.0-0-dev \
libxml2 \
libxml2-dev \
+ libxslt1-dev \
linux-headers-`uname -r` \
mscgen \
octave \
@@ -307,11 +382,7 @@ check_install_oai_software() {
xmlstarlet \
python-pip \
pydb \
- wvdial \
- python-numpy \
- sshpass \
- libxslt1-dev \
- android-tools-adb
+ wget
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
@@ -337,6 +408,7 @@ install_asn1c_from_source(){
./configure
make -j`nproc`
$SUDO make install
+ cd -
) > $asn1_install_log 2>&1
}
diff --git a/cmake_targets/tools/run_enb_s1_usrp b/cmake_targets/tools/run_enb_s1_usrp
index 5bb7ef151f5d6a5e7d5d0f6f4912321d0fc1ea68..2969f759a141ab8fb0f2362a4177871f846188d1 100755
--- a/cmake_targets/tools/run_enb_s1_usrp
+++ b/cmake_targets/tools/run_enb_s1_usrp
@@ -60,7 +60,9 @@ function help()
echo_error " -f, --rf-config-file filename RF specific configuration file"
echo_error " -K, --itti-dump-file filename ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
echo_error " -M, --target-dl-mcs mcs Downlink target MCS."
- echo_error " -m, --mscgen directory Generate mscgen output files in a directory"
+ echo_error " -n, --T-no-wait don't wait for tracer, start immediately"
+ echo_error " -p, --T-port port use given port"
+ echo_error " -m, --mscgen directory Generate mscgen output files in a directory"
echo_error " -s, --show-stdout Do not redirect stdout and stderr to file /tmp/lte_softmodem.stdout.txt."
echo_error " -S, --enable-missed-slot Continue execution in case of missed slot."
echo_error " -T, --target-ul-mcs mcs Uplink target MCS."
@@ -188,7 +190,17 @@ function main()
exe_arguments="$exe_arguments -m $2"
shift 2;
;;
- -V | --vcd)
+ -n | --T-no-wait)
+ echo "setting T tracer operation"
+ exe_arguments="$exe_arguments --T_nowait"
+ shift ;
+ ;;
+ -p | --T-port)
+ echo "setting T tracer port"
+ exe_arguments="$exe_arguments --T_port $2"
+ shift 2;
+ ;;
+ -V | --vcd)
echo "setting gtk-wave output"
exe_arguments="$exe_arguments -V /tmp/oai_gtk_wave.vcd"
shift ;
diff --git a/openair1/PHY/LTE_TRANSPORT/dci_tools.c b/openair1/PHY/LTE_TRANSPORT/dci_tools.c
index a163225f03c77dac72e1d808221c577e6bc53dbe..c849adf2f694a40e63ac6911335f3fe7ba96edd8 100644
--- a/openair1/PHY/LTE_TRANSPORT/dci_tools.c
+++ b/openair1/PHY/LTE_TRANSPORT/dci_tools.c
@@ -1126,12 +1126,8 @@ int generate_eNB_dlsch_params_from_dci(int frame,
dlsch[0]->harq_ids[subframe] = harq_pid;
- if (dlsch0_harq->round == 0) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch[0], harq_pid);
+ if (dlsch0_harq->round == 0)
dlsch0_harq->status = ACTIVE;
- }
break;
@@ -1265,9 +1261,6 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if (dlsch0_harq->round == 0) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch[0], harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
// MCS and TBS don't change across HARQ rounds
@@ -1635,19 +1628,11 @@ int generate_eNB_dlsch_params_from_dci(int frame,
}
// reset HARQ process if this is the first transmission
- if (dlsch0_harq->round == 0) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch0, harq_pid);
+ if (dlsch0_harq->round == 0)
dlsch0_harq->status = ACTIVE;
- }
- if (dlsch1_harq->round == 0) {
- /* necessary test? */
- if (dlsch1_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch1, harq_pid);
+ if (dlsch1_harq->round == 0)
dlsch1_harq->status = ACTIVE;
- }
dlsch0->rnti = rnti;
dlsch1->rnti = rnti;
@@ -2022,19 +2007,11 @@ int generate_eNB_dlsch_params_from_dci(int frame,
}
// reset HARQ process if this is the first transmission
- if ((dlsch0->active==1) && (dlsch0_harq->round == 0)) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch0, harq_pid);
+ if ((dlsch0->active==1) && (dlsch0_harq->round == 0))
dlsch0_harq->status = ACTIVE;
- }
- if ((dlsch1->active==1) && (dlsch1_harq->round == 0)) {
- /* necessary test? */
- if (dlsch1_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch1, harq_pid);
+ if ((dlsch1->active==1) && (dlsch1_harq->round == 0))
dlsch1_harq->status = ACTIVE;
- }
dlsch0->rnti = rnti;
dlsch1->rnti = rnti;
@@ -2174,23 +2151,16 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// check if either TB is disabled (see 36-213 V8.6 p. 26)
- if ((dlsch0_harq->rvidx == 1) && (dlsch0_harq->mcs == 0)) {
- LOG_W(PHY, "what to do with respect to remove_harq_pid_from_freelist?\n");
+ if ((dlsch0_harq->rvidx == 1) && (dlsch0_harq->mcs == 0))
dlsch0_harq->status = DISABLED;
- }
- if ((dlsch1_harq->rvidx == 1) && (dlsch1_harq->mcs == 0)) {
- LOG_W(PHY, "what to do with respect to remove_harq_pid_from_freelist?\n");
+ if ((dlsch1_harq->rvidx == 1) && (dlsch1_harq->mcs == 0))
dlsch1_harq->status = DISABLED;
- }
dlsch0_harq->Nl = 1;
if (dlsch0_harq->round == 0) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
@@ -2355,17 +2325,11 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if ((dlsch0_harq->round == 0) && (dlsch0->active == 1) ) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
dlsch0_harq->mcs = mcs1;
}
if ((dlsch1_harq->round == 0) && (dlsch1->active == 1) ) {
- /* necessary test? */
- if (dlsch1_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch1, harq_pid);
dlsch1_harq->status = ACTIVE;
dlsch1_harq->mcs = mcs2;
}
@@ -2529,9 +2493,6 @@ int generate_eNB_dlsch_params_from_dci(int frame,
if (dlsch0_harq->round == 0) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
@@ -2661,9 +2622,6 @@ int generate_eNB_dlsch_params_from_dci(int frame,
// dlsch0_harq->Ndi = ((DCI1E_5MHz_2A_M10PRB_TDD_t *)dci_pdu)->ndi;
if (dlsch0_harq->round == 0) {
- /* necessary test? */
- if (dlsch0_harq->status == SCH_IDLE)
- remove_harq_pid_from_freelist(dlsch0, harq_pid);
dlsch0_harq->status = ACTIVE;
// printf("Setting DLSCH process %d to ACTIVE\n",harq_pid);
}
diff --git a/openair1/PHY/LTE_TRANSPORT/defs.h b/openair1/PHY/LTE_TRANSPORT/defs.h
index 43bc7e3515975548bc4b2220febb89a5fd7ff171..6d34b8c9b9e300853a1bc664e7efd84c7c028138 100644
--- a/openair1/PHY/LTE_TRANSPORT/defs.h
+++ b/openair1/PHY/LTE_TRANSPORT/defs.h
@@ -258,13 +258,6 @@ typedef struct {
uint8_t error_threshold;
/// Pointers to 8 HARQ processes for the DLSCH
LTE_DL_eNB_HARQ_t *harq_processes[8];
- /// circular list of free harq PIDs (the oldest come first)
- /// (10 is arbitrary value, must be > to max number of DL HARQ processes in LTE)
- int harq_pid_freelist[10];
- /// the head position of the free list (if list is free then head=tail)
- int head_freelist;
- /// the tail position of the free list
- int tail_freelist;
/// Number of soft channel bits
uint32_t G;
/// Codebook index for this dlsch (0,1,2,3)
diff --git a/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c b/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
index 622ff51531525f1dd0e477090a8ff8ae624660b7..366b93e71da8582be093edbc68ee21d0a9809bae 100644
--- a/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
+++ b/openair1/PHY/LTE_TRANSPORT/dlsch_coding.c
@@ -156,9 +156,6 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,uint32_
for (i=0; i<10; i++)
dlsch->harq_ids[i] = Mdlharq;
- dlsch->head_freelist = 0;
- dlsch->tail_freelist = 0;
-
for (i=0; i<Mdlharq; i++) {
dlsch->harq_processes[i] = (LTE_DL_eNB_HARQ_t *)malloc16(sizeof(LTE_DL_eNB_HARQ_t));
LOG_T(PHY, "Required mem size %d (bw scaling %d), dlsch->harq_processes[%d] %p\n",
@@ -199,8 +196,6 @@ LTE_eNB_DLSCH_t *new_eNB_dlsch(unsigned char Kmimo,unsigned char Mdlharq,uint32_
msg("Can't get harq_p %d\n",i);
exit_flag=3;
}
-
- put_harq_pid_in_freelist(dlsch, i);
}
if (exit_flag==0) {
diff --git a/openair1/PHY/MODULATION/slot_fep.c b/openair1/PHY/MODULATION/slot_fep.c
index 6a63043e9c1d0d04dad9c2731925edba4c3a916e..61c83e5b890b4f8545805042b5ed11c8ddb44f7c 100644
--- a/openair1/PHY/MODULATION/slot_fep.c
+++ b/openair1/PHY/MODULATION/slot_fep.c
@@ -55,7 +55,7 @@ int slot_fep(PHY_VARS_UE *phy_vars_ue,
unsigned int rx_offset;
void (*dft)(int16_t *,int16_t *, int);
- int tmp_dft_in[2048]; // This is for misalignment issues for 6 and 15 PRBs
+ int tmp_dft_in[2048] __attribute__ ((aligned (32))); // This is for misalignment issues for 6 and 15 PRBs
switch (frame_parms->ofdm_symbol_size) {
case 128:
diff --git a/openair1/SCHED/defs.h b/openair1/SCHED/defs.h
index af6acca88002f29def1e24dd2e45db68140ee062..29fb7c37e80ff46cbcf06b986525d3502c1758e0 100644
--- a/openair1/SCHED/defs.h
+++ b/openair1/SCHED/defs.h
@@ -400,9 +400,6 @@ uint32_t pdcch_alloc2ul_frame(LTE_DL_FRAME_PARMS *frame_parms,uint32_t frame, ui
uint16_t get_Np(uint8_t N_RB_DL,uint8_t nCCE,uint8_t plus1);
-void put_harq_pid_in_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid);
-void remove_harq_pid_from_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid);
-
int8_t find_ue(uint16_t rnti, PHY_VARS_eNB *phy_vars_eNB);
int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB);
int mac_phy_remove_ue(module_id_t Mod_idP,rnti_t rnti);
diff --git a/openair1/SCHED/phy_mac_stub.c b/openair1/SCHED/phy_mac_stub.c
index 5ed1b6837d2a785aceaa31adef30317716b26c90..a7da9f9cc5eae6871e003268bbc30d9a1085eaf1 100644
--- a/openair1/SCHED/phy_mac_stub.c
+++ b/openair1/SCHED/phy_mac_stub.c
@@ -155,10 +155,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->type = 1;
((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->vrb_type = 0;
((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->rballoc = computeRIV(50,10,3);
- ((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ ((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->ndi = subframe / 5;
((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->rv = 1;
((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->mcs = 1;
- ((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->harq_pid = subframe % 5;
((DCI1A_10MHz_TDD_1_6_t*)&bcch_pdu)->TPC = 1; // set to 3 PRB
memcpy((void*)&DCI_pdu->dci_alloc[0].dci_pdu[0],&bcch_pdu,sizeof(DCI1A_10MHz_TDD_1_6_t));
}
@@ -233,10 +233,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1_5MHz_FDD_t *)&dlsch_pdu)->rballoc = rballoc; //computeRIV(25,10,3);
((DCI1_5MHz_FDD_t *)&dlsch_pdu)->TPC = 0;
- ((DCI1_5MHz_FDD_t *)&dlsch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1_5MHz_FDD_t *)&dlsch_pdu)->harq_pid = subframe % 5;
((DCI1_5MHz_FDD_t *)&dlsch_pdu)->mcs = openair_daq_vars.target_ue_dl_mcs;
- //((DCI1_5MHz_FDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
- ((DCI1_5MHz_FDD_t *)&dlsch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ //((DCI1_5MHz_FDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
+ ((DCI1_5MHz_FDD_t *)&dlsch_pdu)->ndi = subframe / 5;
((DCI1_5MHz_FDD_t *)&dlsch_pdu)->rv = 0;
((DCI1_5MHz_FDD_t *)&dlsch_pdu)->rah = 0;
@@ -266,10 +266,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1_5MHz_TDD_t *)&dlsch_pdu)->rballoc = rballoc; //computeRIV(25,10,3);
((DCI1_5MHz_TDD_t *)&dlsch_pdu)->TPC = 0;
((DCI1_5MHz_TDD_t *)&dlsch_pdu)->dai = 0;
- ((DCI1_5MHz_TDD_t *)&dlsch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1_5MHz_TDD_t *)&dlsch_pdu)->harq_pid = subframe % 5;
((DCI1_5MHz_TDD_t *)&dlsch_pdu)->mcs = openair_daq_vars.target_ue_dl_mcs;
- //((DCI1_5MHz_TDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
- ((DCI1_5MHz_TDD_t *)&dlsch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ //((DCI1_5MHz_TDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
+ ((DCI1_5MHz_TDD_t *)&dlsch_pdu)->ndi = subframe / 5;
((DCI1_5MHz_TDD_t *)&dlsch_pdu)->rv = 0;
((DCI1_5MHz_TDD_t *)&dlsch_pdu)->rah = 0;
memcpy((void*)&DCI_pdu->dci_alloc[0].dci_pdu[0],(void *)&dlsch_pdu,sizeof(DCI1_5MHz_TDD_t));
@@ -304,10 +304,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1_10MHz_FDD_t *)&dlsch_pdu)->rballoc = rballoc; //computeRIV(50,10,3);
((DCI1_10MHz_FDD_t *)&dlsch_pdu)->TPC = 0;
- ((DCI1_10MHz_FDD_t *)&dlsch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1_10MHz_FDD_t *)&dlsch_pdu)->harq_pid = subframe % 5;
((DCI1_10MHz_FDD_t *)&dlsch_pdu)->mcs = openair_daq_vars.target_ue_dl_mcs;
- //((DCI1_10MHz_FDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
- ((DCI1_10MHz_FDD_t *)&dlsch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ //((DCI1_10MHz_FDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
+ ((DCI1_10MHz_FDD_t *)&dlsch_pdu)->ndi = subframe / 5;
((DCI1_10MHz_FDD_t *)&dlsch_pdu)->rv = 0;
((DCI1_10MHz_FDD_t *)&dlsch_pdu)->rah = 0;
@@ -338,10 +338,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1_10MHz_TDD_t *)&dlsch_pdu)->rballoc = rballoc; //computeRIV(50,10,3);
((DCI1_10MHz_TDD_t *)&dlsch_pdu)->TPC = 0;
((DCI1_10MHz_TDD_t *)&dlsch_pdu)->dai = 0;
- ((DCI1_10MHz_TDD_t *)&dlsch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1_10MHz_TDD_t *)&dlsch_pdu)->harq_pid = subframe % 5;
((DCI1_10MHz_TDD_t *)&dlsch_pdu)->mcs = openair_daq_vars.target_ue_dl_mcs;
- //((DCI1_10MHz_TDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
- ((DCI1_10MHz_TDD_t *)&dlsch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ //((DCI1_10MHz_TDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
+ ((DCI1_10MHz_TDD_t *)&dlsch_pdu)->ndi = subframe / 5;
((DCI1_10MHz_TDD_t *)&dlsch_pdu)->rv = 0;
((DCI1_10MHz_TDD_t *)&dlsch_pdu)->rah = 0;
memcpy((void*)&DCI_pdu->dci_alloc[0].dci_pdu[0],(void *)&dlsch_pdu,sizeof(DCI1_10MHz_TDD_t));
@@ -375,10 +375,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1_20MHz_FDD_t *)&dlsch_pdu)->rballoc = rballoc; //computeRIV(100,10,3);
((DCI1_20MHz_FDD_t *)&dlsch_pdu)->TPC = 0;
- ((DCI1_20MHz_FDD_t *)&dlsch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1_20MHz_FDD_t *)&dlsch_pdu)->harq_pid = subframe % 5;
((DCI1_20MHz_FDD_t *)&dlsch_pdu)->mcs = openair_daq_vars.target_ue_dl_mcs;
- //((DCI1_5MHz_FDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
- ((DCI1_20MHz_FDD_t *)&dlsch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ //((DCI1_5MHz_FDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
+ ((DCI1_20MHz_FDD_t *)&dlsch_pdu)->ndi = subframe / 5;
((DCI1_20MHz_FDD_t *)&dlsch_pdu)->rv = 0;
((DCI1_20MHz_FDD_t *)&dlsch_pdu)->rah = 0;
@@ -409,10 +409,10 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI1_20MHz_TDD_t *)&dlsch_pdu)->rballoc = rballoc; //computeRIV(100,10,3);
((DCI1_20MHz_TDD_t *)&dlsch_pdu)->TPC = 0;
((DCI1_20MHz_TDD_t *)&dlsch_pdu)->dai = 0;
- ((DCI1_20MHz_TDD_t *)&dlsch_pdu)->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI1_20MHz_TDD_t *)&dlsch_pdu)->harq_pid = subframe % 5;
((DCI1_20MHz_TDD_t *)&dlsch_pdu)->mcs = openair_daq_vars.target_ue_dl_mcs;
- //((DCI1_20MHz_TDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
- ((DCI1_20MHz_TDD_t *)&dlsch_pdu)->ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ //((DCI1_20MHz_TDD_t *)&dlsch_pdu)->mcs = (unsigned char) ((phy_vars_eNB->frame%1024)%28);
+ ((DCI1_20MHz_TDD_t *)&dlsch_pdu)->ndi = subframe / 5;
((DCI1_20MHz_TDD_t *)&dlsch_pdu)->rv = 0;
((DCI1_20MHz_TDD_t *)&dlsch_pdu)->rah = 0;
memcpy((void*)&DCI_pdu->dci_alloc[0].dci_pdu[0],(void *)&dlsch_pdu,sizeof(DCI1_20MHz_TDD_t));
@@ -451,13 +451,13 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->tpmi = 0;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->rv1 = 0;
- ((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->ndi1 = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ ((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->ndi1 = subframe / 5;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->mcs1 = openair_daq_vars.target_ue_dl_mcs;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->rv2 = 0;
- ((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->ndi2 = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ ((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->ndi2 = subframe / 5;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->mcs2 = openair_daq_vars.target_ue_dl_mcs;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->tb_swap = 0;
- ((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ ((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->harq_pid = subframe % 5;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->TPC = 0;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->rballoc = openair_daq_vars.ue_dl_rb_alloc;
((DCI2_5MHz_2A_FDD_t*) (&DCI_pdu->dci_alloc[0].dci_pdu))->rah = 0;
@@ -473,13 +473,13 @@ void fill_dci(DCI_PDU *DCI_pdu, uint8_t sched_subframe, PHY_VARS_eNB *phy_vars_e
DLSCH_alloc_pdu1E.tpmi = 5; //5=use feedback
DLSCH_alloc_pdu1E.rv = 0;
- DLSCH_alloc_pdu1E.ndi = phy_vars_eNB->proc[sched_subframe].frame_tx&1;
+ DLSCH_alloc_pdu1E.ndi = subframe / 5;
//DLSCH_alloc_pdu1E.mcs = cqi_to_mcs[phy_vars_eNB->eNB_UE_stats->DL_cqi[0]];
//DLSCH_alloc_pdu1E.mcs = (unsigned char) (taus()%28);
DLSCH_alloc_pdu1E.mcs = openair_daq_vars.target_ue_dl_mcs;
//DLSCH_alloc_pdu1E.mcs = (unsigned char) ((phy_vars_eNB->proc[subframe].frame%1024)%28);
phy_vars_eNB->eNB_UE_stats[0].dlsch_mcs1 = DLSCH_alloc_pdu1E.mcs;
- DLSCH_alloc_pdu1E.harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ DLSCH_alloc_pdu1E.harq_pid = subframe % 5;
DLSCH_alloc_pdu1E.dai = 0;
DLSCH_alloc_pdu1E.TPC = 0;
DLSCH_alloc_pdu1E.rballoc = openair_daq_vars.ue_dl_rb_alloc;
diff --git a/openair1/SCHED/phy_procedures_lte_eNb.c b/openair1/SCHED/phy_procedures_lte_eNb.c
index b3dd581de7380a8b5b9b02619db295fdd27bc56d..77a993578accf0e96673175f545e810ebd9e9349 100755
--- a/openair1/SCHED/phy_procedures_lte_eNb.c
+++ b/openair1/SCHED/phy_procedures_lte_eNb.c
@@ -133,30 +133,6 @@ uint8_t is_SR_subframe(PHY_VARS_eNB *phy_vars_eNB,uint8_t UE_id,uint8_t sched_su
return(0);
}
-void put_harq_pid_in_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid)
-{
- DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->tail_freelist] = harq_pid;
- DLSCH_ptr->tail_freelist = (DLSCH_ptr->tail_freelist + 1) % 10;
-}
-
-void remove_harq_pid_from_freelist(LTE_eNB_DLSCH_t *DLSCH_ptr, int harq_pid)
-{
- if (DLSCH_ptr->head_freelist == DLSCH_ptr->tail_freelist) {
- LOG_E(PHY, "%s:%d: you cannot read this!\n", __FILE__, __LINE__);
- abort();
- }
- /* basic check, in case several threads deal with the free list at the same time
- * in normal situations it should not happen, that's also why we don't use any
- * locking mechanism to protect the free list
- * to be refined in case things don't work properly
- */
- if (harq_pid != DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist]) {
- LOG_E(PHY, "%s:%d: critical error, get in touch with the authors\n", __FILE__, __LINE__);
- abort();
- }
- DLSCH_ptr->head_freelist = (DLSCH_ptr->head_freelist + 1) % 10;
-}
-
int32_t add_ue(int16_t rnti, PHY_VARS_eNB *phy_vars_eNB)
{
uint8_t i;
@@ -221,12 +197,6 @@ int mac_phy_remove_ue(module_id_t Mod_idP,rnti_t rntiP) {
memset(&phy_vars_eNB->eNB_UE_stats[i],0,sizeof(LTE_eNB_UE_stats));
// mac_exit_wrapper("Removing UE");
- /* clear the harq pid freelist */
- phy_vars_eNB->dlsch_eNB[i][0]->head_freelist = 0;
- phy_vars_eNB->dlsch_eNB[i][0]->tail_freelist = 0;
- for (j = 0; j < 8; j++)
- put_harq_pid_in_freelist(phy_vars_eNB->dlsch_eNB[i][0], j);
-
return(i);
}
}
@@ -258,9 +228,8 @@ int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16
LTE_eNB_DLSCH_t *DLSCH_ptr;
LTE_eNB_ULSCH_t *ULSCH_ptr;
uint8_t ulsch_subframe,ulsch_frame;
- uint8_t i;
+ int i;
int8_t UE_id = find_ue(rnti,PHY_vars_eNB_g[Mod_id][CC_id]);
- int sf1=(10*frame)+subframe,sf2,sfdiff,sfdiff_max=7;
if (UE_id==-1) {
LOG_D(PHY,"Cannot find UE with rnti %x (Mod_id %d, CC_id %d)\n",rnti, Mod_id, CC_id);
@@ -271,40 +240,19 @@ int get_ue_active_harq_pid(const uint8_t Mod_id,const uint8_t CC_id,const uint16
if (ul_flag == 0) {// this is a DL request
DLSCH_ptr = PHY_vars_eNB_g[Mod_id][CC_id]->dlsch_eNB[(uint32_t)UE_id][0];
- // set to no available process first
- *harq_pid = -1;
-
- for (i=0; i<DLSCH_ptr->Mdlharq; i++) {
- if (DLSCH_ptr->harq_processes[i]!=NULL) {
- if (DLSCH_ptr->harq_processes[i]->status == ACTIVE) {
- sf2 = (DLSCH_ptr->harq_processes[i]->frame*10) + DLSCH_ptr->harq_processes[i]->subframe;
- if (sf2<=sf1)
- sfdiff = sf1-sf2;
- else // this happens when wrapping around 1024 frame barrier
- sfdiff = 10240 + sf1-sf2;
- LOG_D(PHY,"process %d is active, round %d (waiting %d)\n",i,DLSCH_ptr->harq_processes[i]->round,sfdiff);
-
- if (sfdiff>sfdiff_max) { // this is an active process that is waiting longer than the others (and longer than 7 ms)
- sfdiff_max = sfdiff;
- *harq_pid = i;
- *round = DLSCH_ptr->harq_processes[i]->round;
- }
- }
- } else { // a process is not defined
- LOG_E(PHY,"[eNB %d] DLSCH process %d for rnti %x (UE_id %d) not allocated\n",Mod_id,i,rnti,UE_id);
- return(-1);
- }
- }
+ /* let's go synchronous for the moment - maybe we can change at some point */
+ i = (frame * 10 + subframe) % 8;
- /* if no active harq pid, get the oldest in the freelist, if any */
- if (*harq_pid == 255 && DLSCH_ptr->head_freelist != DLSCH_ptr->tail_freelist) {
- *harq_pid = DLSCH_ptr->harq_pid_freelist[DLSCH_ptr->head_freelist];
+ if (DLSCH_ptr->harq_processes[i]->status == ACTIVE) {
+ *harq_pid = i;
+ *round = DLSCH_ptr->harq_processes[i]->round;
+ } else if (DLSCH_ptr->harq_processes[i]->status == SCH_IDLE) {
+ *harq_pid = i;
*round = 0;
- LOG_D(PHY,"process %d is first free process\n", *harq_pid);
+ } else {
+ printf("%s:%d: bad state for harq process - PLEASE REPORT!!\n", __FILE__, __LINE__);
+ abort();
}
-
- LOG_D(PHY,"get_ue_active_harq_pid DL => Frame %d, Subframe %d : harq_pid %d\n",
- frame,subframe,*harq_pid);
} else { // This is a UL request
ULSCH_ptr = PHY_vars_eNB_g[Mod_id][CC_id]->ulsch_eNB[(uint32_t)UE_id];
@@ -1906,7 +1854,6 @@ void process_HARQ_feedback(uint8_t UE_id,
dlsch_harq_proc->round = 0;
ue_stats->dlsch_l2_errors[dl_harq_pid[m]]++;
dlsch_harq_proc->status = SCH_IDLE;
- put_harq_pid_in_freelist(dlsch, dl_harq_pid[m]);
dlsch->harq_ids[dl_subframe] = dlsch->Mdlharq;
}
} else {
@@ -1923,7 +1870,6 @@ void process_HARQ_feedback(uint8_t UE_id,
// Received ACK so set round to 0 and set dlsch_harq_pid IDLE
dlsch_harq_proc->round = 0;
dlsch_harq_proc->status = SCH_IDLE;
- put_harq_pid_in_freelist(dlsch, dl_harq_pid[m]);
dlsch->harq_ids[dl_subframe] = dlsch->Mdlharq;
ue_stats->total_TBS = ue_stats->total_TBS +
@@ -2345,9 +2291,6 @@ void pucch_procedures(const unsigned char sched_subframe,PHY_VARS_eNB *phy_vars_
phy_vars_eNB->eNB_UE_stats[UE_id].sr_received++;
if (phy_vars_eNB->first_sr[UE_id] == 1) { // this is the first request for uplink after Connection Setup, so clear HARQ process 0 use for Msg4
- /* is this test necessary? */
- if (phy_vars_eNB->dlsch_eNB[UE_id][0]->harq_processes[0]->status != SCH_IDLE)
- put_harq_pid_in_freelist(phy_vars_eNB->dlsch_eNB[UE_id][0], 0);
phy_vars_eNB->first_sr[UE_id] = 0;
phy_vars_eNB->dlsch_eNB[UE_id][0]->harq_processes[0]->round=0;
phy_vars_eNB->dlsch_eNB[UE_id][0]->harq_processes[0]->status=SCH_IDLE;
diff --git a/openair2/LAYER2/MAC/eNB_scheduler_primitives.c b/openair2/LAYER2/MAC/eNB_scheduler_primitives.c
index 80a1dbc76aa9f4c9676e137b619088ba99ca550c..bb9e7b3d306512aa8d38eb6d88f442c529c9ee86 100644
--- a/openair2/LAYER2/MAC/eNB_scheduler_primitives.c
+++ b/openair2/LAYER2/MAC/eNB_scheduler_primitives.c
@@ -298,6 +298,12 @@ int rrc_mac_remove_ue(module_id_t mod_idP,rnti_t rntiP)
int UE_id = find_UE_id(mod_idP,rntiP);
int pCC_id = UE_PCCID(mod_idP,UE_id);
+ if (UE_id == -1) {
+ LOG_W(MAC,"rrc_mac_remove_ue: UE %x not found\n", rntiP);
+ mac_phy_remove_ue(mod_idP,rntiP);
+ return 0;
+ }
+
LOG_I(MAC,"Removing UE %d from Primary CC_id %d (rnti %x)\n",UE_id,pCC_id, rntiP);
dump_ue_list(UE_list,0);
diff --git a/openair2/RRC/LITE/L2_interface.c b/openair2/RRC/LITE/L2_interface.c
index a28f2b18948953988edbf7dd8f51a2d77dba78e4..d4ddd0e7abb66d82412eaa47369d9c2882b297a5 100644
--- a/openair2/RRC/LITE/L2_interface.c
+++ b/openair2/RRC/LITE/L2_interface.c
@@ -719,12 +719,12 @@ mac_eNB_get_rrc_status(
}
}
-void mac_eNB_rrc_ul_failure(const module_id_t Mod_instP,
- const int CC_idP,
+void mac_eNB_rrc_ul_failure(const module_id_t Mod_instP,
+ const int CC_idP,
const frame_t frameP,
const sub_frame_t subframeP,
- const rnti_t rntiP) {
-
+ const rnti_t rntiP)
+{
struct rrc_eNB_ue_context_s* ue_context_p = NULL;
ue_context_p = rrc_eNB_get_ue_context(
&eNB_rrc_inst[Mod_instP],
@@ -735,10 +735,9 @@ void mac_eNB_rrc_ul_failure(const module_id_t Mod_instP,
ue_context_p->ue_context.ul_failure_timer=1;
}
else {
- LOG_W(RRC,"Frame %d, Subframe %d: UE %x unknown \n",frameP,subframeP,rntiP);
- rrc_mac_remove_ue(Mod_instP,rntiP);
+ LOG_W(RRC,"Frame %d, Subframe %d: UL failure: UE %x unknown \n",frameP,subframeP,rntiP);
}
-
+ rrc_mac_remove_ue(Mod_instP,rntiP);
}
void mac_eNB_rrc_ul_in_sync(const module_id_t Mod_instP,
diff --git a/openair2/RRC/LITE/rrc_eNB.c b/openair2/RRC/LITE/rrc_eNB.c
index c85e61a0a435b1203dfc46b2f40c172766700abb..2828209d6207a40721bef46a398e54b9da8bde76 100644
--- a/openair2/RRC/LITE/rrc_eNB.c
+++ b/openair2/RRC/LITE/rrc_eNB.c
@@ -3790,14 +3790,29 @@ rrc_eNB_decode_ccch(
//#warning "TODO: stmsi_exist: remove UE from MAC/PHY (how?)"
LOG_I(RRC," S-TMSI exists, ue_context_p %p\n",ue_context_p);
stmsi_received=1;
+ /* replace rnti in the context */
+ /* for that, remove the context from the RB tree */
+ RB_REMOVE(rrc_ue_tree_s, &eNB_rrc_inst[ctxt_pP->module_id].rrc_ue_head, ue_context_p);
+ /* and insert again, after changing rnti everywhere it has to be changed */
+ ue_context_p->ue_id_rnti = ctxt_pP->rnti;
ue_context_p->ue_context.rnti = ctxt_pP->rnti;
+ RB_INSERT(rrc_ue_tree_s, &eNB_rrc_inst[ctxt_pP->module_id].rrc_ue_head, ue_context_p);
+ /* reset timers */
+ ue_context_p->ue_context.ul_failure_timer = 0;
+ ue_context_p->ue_context.ue_release_timer = 0;
// AssertFatal(0 == 1, "TODO: remove UE from MAC/PHY (how?)");
// ue_context_p = NULL;
} else {
ue_context_p = rrc_eNB_get_next_free_ue_context(ctxt_pP, NOT_A_RANDOM_UE_IDENTITY);
- ue_context_p->ue_context.Initialue_identity_s_TMSI.presence = TRUE;
- ue_context_p->ue_context.Initialue_identity_s_TMSI.mme_code = mme_code;
- ue_context_p->ue_context.Initialue_identity_s_TMSI.m_tmsi = m_tmsi;
+ if (ue_context_p == NULL)
+ LOG_E(RRC, "%s:%d:%s: rrc_eNB_get_next_free_ue_context returned NULL\n", __FILE__, __LINE__, __FUNCTION__);
+ if (ue_context_p != NULL) {
+ ue_context_p->ue_context.Initialue_identity_s_TMSI.presence = TRUE;
+ ue_context_p->ue_context.Initialue_identity_s_TMSI.mme_code = mme_code;
+ ue_context_p->ue_context.Initialue_identity_s_TMSI.m_tmsi = m_tmsi;
+ } else {
+ break;
+ }
}
MSC_LOG_RX_MESSAGE(
diff --git a/openair2/UTIL/OPT/probe.c b/openair2/UTIL/OPT/probe.c
index 28bad4d6c9eecc79bdf218986ff9b14ca173b976..eef98ae72975e4e945ed0d4f6cf29d61894a4584 100644
--- a/openair2/UTIL/OPT/probe.c
+++ b/openair2/UTIL/OPT/probe.c
@@ -137,27 +137,15 @@ typedef guint8 gboolean;
//static unsigned char g_PDUBuffer[1600];
//static unsigned int g_PDUOffset;
-#ifdef JUMBO_FRAME
-static unsigned char g_frameBuffer[9000];
-#else
-static unsigned char g_frameBuffer[1600];
-#endif
-//static unsigned char g_fileBuffer[1600];
-static unsigned int g_frameOffset;
+
char in_ip[40];
char in_path[100];
-static uint16_t in_port;
FILE *file_fd = NULL;
trace_mode_t opt_type = OPT_NONE;
static radio_type_t radio_type;
static unsigned int subframesSinceCaptureStart;
-// double timing_perf[250];
-// clock_t timing_in[250];
-// clock_t timing_out[250];
-int test=0;
-int init_value=0;
static int g_socksd = -1;/* UDP socket used for sending frames */
static struct sockaddr_in g_serv_addr;
@@ -277,66 +265,73 @@ static void SendFrame(guint8 radioType, guint8 direction, guint8 rntiType,
guint8 oob_event, guint8 oob_event_value,
uint8_t *pdu_buffer, unsigned int pdu_buffer_size)
{
+ #ifdef JUMBO_FRAME
+ static unsigned char frameBuffer[9000];
+ #else
+ static unsigned char frameBuffer[1600];
+ #endif
+ static unsigned int frameOffset;
+
ssize_t bytesSent;
- g_frameOffset = 0;
+ frameOffset = 0;
uint16_t tmp16;
/********************************************************************/
/* Fixed start to each frame (allowing heuristic dissector to work) */
/* Not NULL terminated */
- memset(g_frameBuffer+g_frameOffset, 0, sizeof(mac_lte_info)+pdu_buffer_size + 8);
+ memset(frameBuffer+frameOffset, 0, sizeof(mac_lte_info)+pdu_buffer_size + 8);
- memcpy(g_frameBuffer+g_frameOffset, MAC_LTE_START_STRING,
+ memcpy(frameBuffer+frameOffset, MAC_LTE_START_STRING,
strlen(MAC_LTE_START_STRING));
- g_frameOffset += strlen(MAC_LTE_START_STRING);
+ frameOffset += strlen(MAC_LTE_START_STRING);
/******************************************************************************/
/* Now write out fixed fields (the mandatory elements of struct mac_lte_info) */
- g_frameBuffer[g_frameOffset++] = radioType;
- g_frameBuffer[g_frameOffset++] = direction;
- g_frameBuffer[g_frameOffset++] = rntiType;
+ frameBuffer[frameOffset++] = radioType;
+ frameBuffer[frameOffset++] = direction;
+ frameBuffer[frameOffset++] = rntiType;
/*************************************/
/* Now optional fields */
/* RNTI */
- g_frameBuffer[g_frameOffset++] = MAC_LTE_RNTI_TAG;
+ frameBuffer[frameOffset++] = MAC_LTE_RNTI_TAG;
tmp16 = htons(rnti);
- memcpy(g_frameBuffer+g_frameOffset, &tmp16, 2);
- g_frameOffset += 2;
+ memcpy(frameBuffer+frameOffset, &tmp16, 2);
+ frameOffset += 2;
/* UEId */
- g_frameBuffer[g_frameOffset++] = MAC_LTE_UEID_TAG;
+ frameBuffer[frameOffset++] = MAC_LTE_UEID_TAG;
tmp16 = htons(ueid);
- memcpy(g_frameBuffer+g_frameOffset, &tmp16, 2);
- g_frameOffset += 2;
+ memcpy(frameBuffer+frameOffset, &tmp16, 2);
+ frameOffset += 2;
/* Subframe number */
- g_frameBuffer[g_frameOffset++] = MAC_LTE_SUBFRAME_TAG;
+ frameBuffer[frameOffset++] = MAC_LTE_SUBFRAME_TAG;
tmp16 = htons(subframeNumber); // frame counter : this will give an expert info as wireshark expects SF and not F
- memcpy(g_frameBuffer+g_frameOffset, &tmp16, 2);
- g_frameOffset += 2;
+ memcpy(frameBuffer+frameOffset, &tmp16, 2);
+ frameOffset += 2;
- g_frameBuffer[g_frameOffset++] = MAC_LTE_CRC_STATUS_TAG;
- g_frameBuffer[g_frameOffset++] = crcStatus;
+ frameBuffer[frameOffset++] = MAC_LTE_CRC_STATUS_TAG;
+ frameBuffer[frameOffset++] = crcStatus;
#ifdef WIRESHARK_DEV
- g_frameOffset += 2;
+ frameOffset += 2;
tmp16 = htons(subframeNumber); // subframe
- memcpy(g_frameBuffer+g_frameOffset, &tmp16, 2);
- g_frameOffset += 2;
+ memcpy(frameBuffer+frameOffset, &tmp16, 2);
+ frameOffset += 2;
#endif
/***********************************************************/
/* For these optional fields, no need to encode if value is default */
if (!isPredefinedData) {
- g_frameBuffer[g_frameOffset++] = MAC_LTE_PREDEFINED_DATA_TAG;
- g_frameBuffer[g_frameOffset++] = isPredefinedData;
+ frameBuffer[frameOffset++] = MAC_LTE_PREDEFINED_DATA_TAG;
+ frameBuffer[frameOffset++] = isPredefinedData;
}
if (retx != 0) {
- g_frameBuffer[g_frameOffset++] = MAC_LTE_RETX_TAG;
- g_frameBuffer[g_frameOffset++] = retx;
+ frameBuffer[frameOffset++] = MAC_LTE_RETX_TAG;
+ frameBuffer[frameOffset++] = retx;
}
#ifdef WIRESHARK_DEV
@@ -347,19 +342,19 @@ static void SendFrame(guint8 radioType, guint8 direction, guint8 rntiType,
switch (oob_event) {
case ltemac_send_preamble :
LOG_D(OPT,"oob event %d %d\n",ltemac_send_preamble );
- //g_frameBuffer[g_frameOffset++]=0;
- //g_frameBuffer[g_frameOffset++]=0;
- //g_frameBuffer[g_frameOffset++]=0;
- g_frameBuffer[g_frameOffset++] = MAC_LTE_OOB_EVENT_TAG;
- g_frameBuffer[g_frameOffset++]=ltemac_send_preamble;
- g_frameBuffer[g_frameOffset++]=rnti; // is the preamble
- g_frameBuffer[g_frameOffset++]=oob_event_value;
+ //frameBuffer[frameOffset++]=0;
+ //frameBuffer[frameOffset++]=0;
+ //frameBuffer[frameOffset++]=0;
+ frameBuffer[frameOffset++] = MAC_LTE_OOB_EVENT_TAG;
+ frameBuffer[frameOffset++]=ltemac_send_preamble;
+ frameBuffer[frameOffset++]=rnti; // is the preamble
+ frameBuffer[frameOffset++]=oob_event_value;
break;
case ltemac_send_sr:
- g_frameBuffer[g_frameOffset++]=ltemac_send_sr;
- g_frameOffset+=2;
- g_frameBuffer[g_frameOffset++]=oob_event_value;
+ frameBuffer[frameOffset++]=ltemac_send_sr;
+ frameOffset+=2;
+ frameBuffer[frameOffset++]=oob_event_value;
break;
case ltemac_sr_failure:
@@ -372,23 +367,23 @@ static void SendFrame(guint8 radioType, guint8 direction, guint8 rntiType,
#endif
/***************************************/
/* Now write the MAC PDU */
- g_frameBuffer[g_frameOffset++] = MAC_LTE_PAYLOAD_TAG;
+ frameBuffer[frameOffset++] = MAC_LTE_PAYLOAD_TAG;
/* Append actual PDU */
- //memcpy(g_frameBuffer+g_frameOffset, g_PDUBuffer, g_PDUOffset);
- //g_frameOffset += g_PDUOffset;
+ //memcpy(frameBuffer+frameOffset, g_PDUBuffer, g_PDUOffset);
+ //frameOffset += g_PDUOffset;
if (pdu_buffer != NULL) {
- memcpy(g_frameBuffer+g_frameOffset, (void*)pdu_buffer, pdu_buffer_size);
- g_frameOffset += pdu_buffer_size;
+ memcpy(frameBuffer+frameOffset, (void*)pdu_buffer, pdu_buffer_size);
+ frameOffset += pdu_buffer_size;
}
/* Send out the data over the UDP socket */
- bytesSent = sendto(g_socksd, g_frameBuffer, g_frameOffset, 0,
+ bytesSent = sendto(g_socksd, frameBuffer, frameOffset, 0,
(const struct sockaddr *)&g_serv_addr, sizeof(g_serv_addr));
- if (bytesSent != g_frameOffset) {
+ if (bytesSent != frameOffset) {
LOG_W(OPT, "sendto() failed (not a thread-safe func)- expected %d bytes, got %d (errno=%d)\n",
- g_frameOffset, bytesSent, errno);
+ frameOffset, bytesSent, errno);
//exit(1);
}
}
@@ -509,6 +504,7 @@ void trace_pdu(int direction, uint8_t *pdu_buffer, unsigned int pdu_buffer_size,
/*---------------------------------------------------*/
int init_opt(char *path, char *ip, char *port, radio_type_t radio_type_p)
{
+ uint16_t in_port;
subframesSinceCaptureStart = 0;
if (path != NULL) {
@@ -612,37 +608,4 @@ void terminate_opt(void)
break;
}
}
-/*
-double *timing_analyzer(int index, int direction ){
-//
-int i;
-if (direction==0)// in
-{
- timing_in[index]=clock();
- //if(timing_out[index+100]>timing_in[index+100]);
- //timing_perf[index+100] +=(double)((double)(timing_out[index+100]-timing_in[index+100])/(double)CLOCKS_PER_SEC);
-}
-else
-{
- timing_out[index]=clock();
- if(index==5)timing_perf[index]=0;
- timing_perf[index] +=(double)((double)(timing_out[index]-timing_in[index])/(((double)CLOCKS_PER_SEC)/1000000));
-
- //LOG_I(OPT,"timing_analyser index %d =%f\n",index,timing_perf[index]);
- init_value++;
- if(init_value==500)
- {
- for(i=0;i<6;i++)
- {
- LOG_I(OPT,"timing_analyser index %d =%f\n",i,timing_perf[i]);
- }
- init_value=0;
- }
- return(&timing_perf[0]);
-
-}
-
-}
-
-*/
diff --git a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h
index cba2b7341e2ad89ccdb8047d5fbb9628674e629e..c97ac7857df021918df23abbddee645ed18e35e1 100644
--- a/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h
+++ b/targets/ARCH/LMSSDR/USERSPACE/LIB/lmsSDR/dataTypes.h
@@ -14,14 +14,15 @@ typedef struct
int16_t q;
} complex16_t;
-typedef struct
+class SamplesPacket
{
+ public:
uint64_t timestamp; //timestamp of the packet
uint16_t first; //index of first unused sample in samples[]
uint16_t last; //end index of samples
static const uint16_t samplesCount = 1024; //maximum number of samples in packet
complex16_t samples[samplesCount]; //must be power of two
-} SamplesPacket;
+};
complex16_t operator &=(complex16_t & other1, const complex16_t & other) // copy assignment
{
@@ -30,4 +31,4 @@ complex16_t operator &=(complex16_t & other1, const complex16_t & other) // copy
return other1;
}
-#endif
\ No newline at end of file
+#endif
diff --git a/targets/TEST/OAI/case13.py b/targets/TEST/OAI/case13.py
index 1744bcb32c4eae8b3404ea4c952cfdaa029c9574..2148ddb52fe59f0246771081f9f21d1324b2cb29 100644
--- a/targets/TEST/OAI/case13.py
+++ b/targets/TEST/OAI/case13.py
@@ -49,15 +49,16 @@ NUM_eNB=1
NUM_TRIALS=3
PRB=[25,50,100]
-MCS=[0,4,9,10,13,16,17,22,27]
+MCS=[3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28]
+#MCS=[0,4,9,10,13,16,17,22,27]
#PRB=[100]
#MCS=[16]
-ANT_TX=1 # 2
+ANT_TX=2 # 2
ANT_RX=2 # 2
CHANNEL=["N"]
#CHANNEL=["C","E","F","G","H","I","L","M"] # A,B,C,D,E,F,
TX_MODE=2 # 2,
-MIN_SNR=0
+MIN_SNR=10
MAX_SNR=40
PERF=75
OPT="-L"
@@ -69,9 +70,9 @@ FRAME=2000
def execute(oai, user, pw, host,logfile,logdir,debug,cpu):
case = '10'
- oai.send('cd $OPENAIR1_DIR;')
- oai.send('cd SIMULATION/LTE_PHY;')
-
+ oai.send('cd $OPENAIR_TARGETS;')
+ oai.send('cd bin;')
+ oai.send('cp ./ulsim.Rel10 ./ulsim.Rel10.'+host)
try:
log.start()
test = '300'
@@ -80,13 +81,13 @@ def execute(oai, user, pw, host,logfile,logdir,debug,cpu):
diag = 'ulsim is not running normally (Segmentation fault / Exiting / FATAL), debugging might be needed'
trace = logdir + '/log_' + host + case + test + '_1.txt;'
tee = ' 2>&1 | tee ' + trace
- oai.send_expect_false('./ulsim.rel8.'+ host + ' ' + conf + tee, 'Segmentation fault', 30)
+ oai.send_expect_false('./ulsim.Rel10.'+ host + ' ' + conf + tee, 'Segmentation fault', 30)
trace = logdir + '/log_' + host + case + test + '_2.txt;'
tee = ' 2>&1 | tee ' + trace
- oai.send_expect_false('./ulsim.rel8.'+ host + ' ' + conf + tee, 'Exiting', 30)
+ oai.send_expect_false('./ulsim.Rel10.'+ host + ' ' + conf + tee, 'Exiting', 30)
trace = logdir + '/log_' + host + case + test + '_3.txt;'
tee = ' 2>&1 | tee ' + trace
- oai.send_expect_false('./ulsim.rel8.'+ host + ' ' + conf + tee, 'FATAL', 30)
+ oai.send_expect_false('./ulsim.Rel10.'+ host + ' ' + conf + tee, 'FATAL', 30)
except log.err, e:
log.fail(case, test, name, conf, e.value, diag, logfile,trace)
@@ -100,42 +101,47 @@ def execute(oai, user, pw, host,logfile,logdir,debug,cpu):
diag = 'no diagnostic is available, check the log file'
for i in range(len(PRB)):
for o in range(len(CHANNEL)):
- MIN_SNR=0
+ MIN_SNR=10
for j in range(len(MCS)):
for m in range (1,ANT_RX):
for p in range(1,TX_MODE):
- for q in range(MIN_SNR,MAX_SNR):
- #if if PRB[i] :
-
- conf = '-B' + str(PRB[i]) + ' -m'+str(MCS[j]) + ' -y'+str(m) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -e.1 -P -n'+str(FRAME)+' -O'+str(PERF)+' '+ OPT
- trace = logdir + '/time_meas' + '_prb'+str(PRB[i])+'_mcs'+ str(MCS[j])+ '_antrx' + str(m) + '_channel' +str(CHANNEL[o]) + '_tx' +str(p) + '_snr' +str(q)+'.'+case+str(test)+ '.log'
- tee = ' 2>&1 | tee ' + trace
- if cpu > -1 :
- cmd = 'taskset -c ' + str(cpu) + ' ./ulsim.rel8.'+ host + ' ' + conf + tee
- else :
- cmd = './ulsim.rel8.'+ host + ' ' + conf + tee
-
- if debug :
- print cmd
+ for r in range(5,PRB[i]):
+ for q in range(MIN_SNR,MAX_SNR):
+
+
+ if r ==7 or r ==11 or r ==14 or r == 17 or r==19 or r == 21 or r == 23 or r == 26 or r == 28 :
+ continue
- # match = oai.send_expect_re(cmd, 'passed', 0, 1000)
- match =1
- if match :
- log.ok(case, str(test), name, conf, '', logfile)
- MIN_SNR = q - 1 # just to speed up the test
- test+=1
- break # found the smallest snr
- else :
- if q == MAX_SNR -1 :
- log.skip(case,str(test), name, conf,'','',logfile)
+ conf = '-B' + str(PRB[i]) + ' -r'+str(r) + ' -m'+str(MCS[j]) + ' -y'+str(m) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -e.1 -P -n'+str(FRAME)+' -O'+str(PERF)+' '+ OPT
+ trace = logdir + '/time_meas' + '_prb'+str(PRB[i])+ '_rb'+str(r)+'_mcs'+ str(MCS[j])+ '_antrx' + str(m) + '_channel' +str(CHANNEL[o]) + '_tx' +str(p) + '_snr' +str(q)+'.'+case+str(test)+ '.log'
+ tee = ' 2>&1 | tee ' + trace
+ if cpu > -1 :
+ cmd = 'taskset -c ' + str(cpu) + ' ./ulsim.Rel10.'+ host + ' ' + conf + tee
+ else :
+ cmd = './ulsim.Rel10.'+ host + ' ' + conf + tee
+
+ if debug :
+ print cmd
+
+ match = oai.send_expect_re(cmd, 'passed', 0, 1000)
+ #match =1
+ if match :
+
+ log.ok(case, str(test), name, conf, '', logfile)
+ MIN_SNR = q - 1 # just to speed up the test
test+=1
- break
- try:
- if os.path.isfile(trace) :
- os.remove(trace)
- except OSError, e: ## if failed, report it back to the user ##
- print ("Error: %s - %s." % (e.filename,e.strerror))
-
+ break # found the smallest snr
+ else :
+ if q == MAX_SNR -1 :
+ log.skip(case,str(test), name, conf,'','',logfile)
+ test+=1
+ break
+ try:
+ if os.path.isfile(trace) :
+ os.remove(trace)
+ except OSError, e: ## if failed, report it back to the user ##
+ print ("Error: %s - %s." % (e.filename,e.strerror))
+
except log.err, e: