lte-ue.c 60 KB
Newer Older
1 2 3 4 5
/*
 * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The OpenAirInterface Software Alliance licenses this file to You under
Cedric Roux's avatar
Cedric Roux committed
6
 * the OAI Public License, Version 1.1  (the "License"); you may not use this file
7 8 9 10 11 12 13 14 15 16 17 18 19 20
 * except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.openairinterface.org/?page_id=698
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *-------------------------------------------------------------------------------
 * For more information about the OpenAirInterface (OAI) Software Alliance:
 *      contact@openairinterface.org
 */
21 22 23 24 25 26 27 28 29 30 31

/*! \file lte-ue.c
 * \brief threads and support functions for real-time LTE UE target
 * \author R. Knopp, F. Kaltenberger, Navid Nikaein
 * \date 2015
 * \version 0.1
 * \company Eurecom
 * \email: knopp@eurecom.fr,florian.kaltenberger@eurecom.fr, navid.nikaein@eurecom.fr
 * \note
 * \warning
 */
32
#include "lte-softmodem.h"
33 34 35

#include "rt_wrapper.h"

knopp's avatar
 
knopp committed
36
#ifdef OPENAIR2
37 38
#include "LAYER2/MAC/defs.h"
#include "RRC/LITE/extern.h"
knopp's avatar
 
knopp committed
39
#endif
40
#include "PHY_INTERFACE/phy_stub_UE.h"
41 42 43 44 45 46 47 48 49
#include "PHY_INTERFACE/extern.h"

#undef MALLOC //there are two conflicting definitions, so we better make sure we don't use it at all
//#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all

#include "PHY/extern.h"
#include "SCHED/extern.h"
#include "LAYER2/MAC/extern.h"
#include "LAYER2/MAC/proto.h"
50 51
//#include "openair2/PHY_INTERFACE/phy_stub_UE.h"

52 53 54 55 56 57 58 59

#include "UTIL/LOG/log_extern.h"
#include "UTIL/OTG/otg_tx.h"
#include "UTIL/OTG/otg_externs.h"
#include "UTIL/MATH/oml.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"

Bilel's avatar
Bilel committed
60 61
#include "T.h"

Bilel's avatar
Bilel committed
62
extern double cpuf;
63
extern uint8_t  nfapi_mode;
Bilel's avatar
Bilel committed
64

65 66
#define FRAME_PERIOD    100000000ULL
#define DAQ_PERIOD      66667ULL
laurent's avatar
laurent committed
67
#define FIFO_PRIORITY   40
68 69

typedef enum {
laurent's avatar
laurent committed
70 71 72
    pss=0,
    pbch=1,
    si=2
73 74
} sync_mode_t;

75
void init_UE_threads(int);
76
void init_UE_threads_stub(int);
77
void *UE_thread(void *arg);
78
void init_UE(int nb_inst,int,int);
79
void init_UE_stub(int nb_inst,int,int);
80
extern void oai_subframe_ind(uint16_t sfn, uint16_t sf);
81
//extern int tx_req_UE_MAC1();
82

83 84
int32_t **rxdata;
int32_t **txdata;
85

86 87 88 89
int timer_subframe;
int timer_frame;
SF_ticking *phy_stub_ticking;

90
#define KHz (1000UL)
91
#define MHz (1000*KHz)
92 93

typedef struct eutra_band_s {
laurent's avatar
laurent committed
94 95 96 97 98 99
    int16_t band;
    uint32_t ul_min;
    uint32_t ul_max;
    uint32_t dl_min;
    uint32_t dl_max;
    lte_frame_type_t frame_type;
100 101 102
} eutra_band_t;

typedef struct band_info_s {
laurent's avatar
laurent committed
103 104
    int nbands;
    eutra_band_t band_info[100];
105 106 107 108
} band_info_t;

band_info_t bands_to_scan;

109
static const eutra_band_t eutra_bands[] = {
laurent's avatar
laurent committed
110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138
    { 1, 1920    * MHz, 1980    * MHz, 2110    * MHz, 2170    * MHz, FDD},
    { 2, 1850    * MHz, 1910    * MHz, 1930    * MHz, 1990    * MHz, FDD},
    { 3, 1710    * MHz, 1785    * MHz, 1805    * MHz, 1880    * MHz, FDD},
    { 4, 1710    * MHz, 1755    * MHz, 2110    * MHz, 2155    * MHz, FDD},
    { 5,  824    * MHz,  849    * MHz,  869    * MHz,  894    * MHz, FDD},
    { 6,  830    * MHz,  840    * MHz,  875    * MHz,  885    * MHz, FDD},
    { 7, 2500    * MHz, 2570    * MHz, 2620    * MHz, 2690    * MHz, FDD},
    { 8,  880    * MHz,  915    * MHz,  925    * MHz,  960    * MHz, FDD},
    { 9, 1749900 * KHz, 1784900 * KHz, 1844900 * KHz, 1879900 * KHz, FDD},
    {10, 1710    * MHz, 1770    * MHz, 2110    * MHz, 2170    * MHz, FDD},
    {11, 1427900 * KHz, 1452900 * KHz, 1475900 * KHz, 1500900 * KHz, FDD},
    {12,  698    * MHz,  716    * MHz,  728    * MHz,  746    * MHz, FDD},
    {13,  777    * MHz,  787    * MHz,  746    * MHz,  756    * MHz, FDD},
    {14,  788    * MHz,  798    * MHz,  758    * MHz,  768    * MHz, FDD},
    {17,  704    * MHz,  716    * MHz,  734    * MHz,  746    * MHz, FDD},
    {20,  832    * MHz,  862    * MHz,  791    * MHz,  821    * MHz, FDD},
    {22, 3510    * MHz, 3590    * MHz, 3410    * MHz, 3490    * MHz, FDD},
    {33, 1900    * MHz, 1920    * MHz, 1900    * MHz, 1920    * MHz, TDD},
    {34, 2010    * MHz, 2025    * MHz, 2010    * MHz, 2025    * MHz, TDD},
    {35, 1850    * MHz, 1910    * MHz, 1850    * MHz, 1910    * MHz, TDD},
    {36, 1930    * MHz, 1990    * MHz, 1930    * MHz, 1990    * MHz, TDD},
    {37, 1910    * MHz, 1930    * MHz, 1910    * MHz, 1930    * MHz, TDD},
    {38, 2570    * MHz, 2620    * MHz, 2570    * MHz, 2630    * MHz, TDD},
    {39, 1880    * MHz, 1920    * MHz, 1880    * MHz, 1920    * MHz, TDD},
    {40, 2300    * MHz, 2400    * MHz, 2300    * MHz, 2400    * MHz, TDD},
    {41, 2496    * MHz, 2690    * MHz, 2496    * MHz, 2690    * MHz, TDD},
    {42, 3400    * MHz, 3600    * MHz, 3400    * MHz, 3600    * MHz, TDD},
    {43, 3600    * MHz, 3800    * MHz, 3600    * MHz, 3800    * MHz, TDD},
    {44, 703    * MHz, 803    * MHz, 703    * MHz, 803    * MHz, TDD},
139 140
};

141 142


143

144 145 146 147
pthread_t                       main_ue_thread;
pthread_attr_t                  attr_UE_thread;
struct sched_param              sched_param_UE_thread;

knopp's avatar
knopp committed
148
void phy_init_lte_ue_transport(PHY_VARS_UE *ue,int absraction_flag);
149

knopp's avatar
knopp committed
150 151 152
PHY_VARS_UE* init_ue_vars(LTE_DL_FRAME_PARMS *frame_parms,
			  uint8_t UE_id,
			  uint8_t abstraction_flag)
153 154 155

{

knopp's avatar
knopp committed
156 157
  PHY_VARS_UE* ue;

158
  if (frame_parms!=(LTE_DL_FRAME_PARMS *)NULL) { // if we want to give initial frame parms, allocate the PHY_VARS_UE structure and put them in
knopp's avatar
knopp committed
159 160 161 162 163 164
    ue = (PHY_VARS_UE *)malloc(sizeof(PHY_VARS_UE));
    memset(ue,0,sizeof(PHY_VARS_UE));
    memcpy(&(ue->frame_parms), frame_parms, sizeof(LTE_DL_FRAME_PARMS));
  }					
  else ue = PHY_vars_UE_g[UE_id][0];

165 166 167

  ue->Mod_id      = UE_id;
  ue->mac_enabled = 1;
168 169 170 171

  // Panos: In phy_stub_UE (MAC-to-MAC) mode these init functions don't need to get called. Is this correct?
  if (nfapi_mode!=3)
  {
knopp's avatar
knopp committed
172 173 174 175
  // initialize all signal buffers
  init_lte_ue_signal(ue,1,abstraction_flag);
  // intialize transport
  init_lte_ue_transport(ue,abstraction_flag);
176
  }
knopp's avatar
knopp committed
177 178

  return(ue);
179 180
}

knopp's avatar
knopp committed
181

182 183
char uecap_xer[1024];

184 185


laurent's avatar
laurent committed
186
void init_thread(int sched_runtime, int sched_deadline, int sched_fifo, cpu_set_t *cpuset, char * name) {
187

laurent's avatar
laurent committed
188 189 190 191 192 193 194 195 196
#ifdef DEADLINE_SCHEDULER
    if (sched_runtime!=0) {
        struct sched_attr attr= {0};
        attr.size = sizeof(attr);
        attr.sched_policy = SCHED_DEADLINE;
        attr.sched_runtime  = sched_runtime;
        attr.sched_deadline = sched_deadline;
        attr.sched_period   = 0;
        AssertFatal(sched_setattr(0, &attr, 0) == 0,
197
                    "[SCHED] %s thread: sched_setattr failed %s \n", name, strerror(errno));
198 199
        LOG_I(HW,"[SCHED][eNB] %s deadline thread %lu started on CPU %d\n",
              name, (unsigned long)gettid(), sched_getcpu());
knopp's avatar
knopp committed
200
    }
laurent's avatar
laurent committed
201
#else
202
    if (CPU_COUNT(cpuset) > 0)
laurent's avatar
laurent committed
203 204 205 206 207
        AssertFatal( 0 == pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), cpuset), "");
    struct sched_param sp;
    sp.sched_priority = sched_fifo;
    AssertFatal(pthread_setschedparam(pthread_self(),SCHED_FIFO,&sp)==0,
                "Can't set thread priority, Are you root?\n");
208 209 210 211 212 213 214 215
    /* Check the actual affinity mask assigned to the thread */
    cpu_set_t *cset=CPU_ALLOC(CPU_SETSIZE);
    if (0 == pthread_getaffinity_np(pthread_self(), CPU_ALLOC_SIZE(CPU_SETSIZE), cset)) {
      char txt[512]={0};
      for (int j = 0; j < CPU_SETSIZE; j++)
        if (CPU_ISSET(j, cset))
	  sprintf(txt+strlen(txt), " %d ", j);
      printf("CPU Affinity of thread %s is %s\n", name, txt);
Rohit Gupta's avatar
Rohit Gupta committed
216
    }
217
    CPU_FREE(cset);
218 219
#endif

laurent's avatar
laurent committed
220
}
221

222
void init_UE(int nb_inst,int eMBMS_active, int uecap_xer_in) {
223

knopp's avatar
knopp committed
224
  PHY_VARS_UE *UE;
225 226
  int         inst;
  int         ret;
knopp's avatar
knopp committed
227

228
  LOG_I(PHY,"UE : Calling Layer 2 for initialization\n");
229 230 231 232
    
  l2_init_ue(eMBMS_active,(uecap_xer_in==1)?uecap_xer:NULL,
	     0,// cba_group_active
	     0); // HO flag
233
  
knopp's avatar
knopp committed
234
  for (inst=0;inst<nb_inst;inst++) {
235

236
    LOG_I(PHY,"Initializing memory for UE instance %d (%p)\n",inst,PHY_vars_UE_g[inst]);
knopp's avatar
knopp committed
237 238
    PHY_vars_UE_g[inst][0] = init_ue_vars(NULL,inst,0);

239
    LOG_I(PHY,"Intializing UE Threads for instance %d (%p,%p)...\n",inst,PHY_vars_UE_g[inst],PHY_vars_UE_g[inst][0]);
knopp's avatar
knopp committed
240 241
    init_UE_threads(inst);
    UE = PHY_vars_UE_g[inst][0];
knopp's avatar
knopp committed
242

243 244 245 246 247
    if (oaisim_flag == 0) {
      ret = openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]);
      if (ret !=0){
	exit_fun("Error loading device library");
      }
Rohit Gupta's avatar
Rohit Gupta committed
248
    }
249
    UE->rfdevice.host_type = RAU_HOST;
knopp's avatar
knopp committed
250
    //    UE->rfdevice.type      = NONE_DEV;
251 252 253 254 255
    PHY_VARS_UE *UE = PHY_vars_UE_g[inst][0];
    AssertFatal(0 == pthread_create(&UE->proc.pthread_ue,
                                    &UE->proc.attr_ue,
                                    UE_thread,
                                    (void*)UE), "");
256 257
  }

258
  printf("UE threads created by %ld\n", gettid());
259 260
#if 0
#if defined(ENABLE_USE_MME)
261
  extern volatile int start_UE;
262 263 264 265
  while (start_UE == 0) {
    sleep(1);
  }
#endif
266
#endif
267 268
}

269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320

void init_UE_stub(int nb_inst,int eMBMS_active, int uecap_xer_in) {

  PHY_VARS_UE *UE;
  int         inst;
  //int         ret;

  LOG_I(PHY,"UE : Calling Layer 2 for initialization\n");

  l2_init_ue(eMBMS_active,(uecap_xer_in==1)?uecap_xer:NULL,
	     0,// cba_group_active
	     0); // HO flag

  for (inst=0;inst<nb_inst;inst++) {

    LOG_I(PHY,"Initializing memory for UE instance %d (%p)\n",inst,PHY_vars_UE_g[inst]);
    PHY_vars_UE_g[inst][0] = init_ue_vars(NULL,inst,0);

    LOG_I(PHY,"Intializing UE Threads for instance %d (%p,%p)...\n",inst,PHY_vars_UE_g[inst],PHY_vars_UE_g[inst][0]);
    init_UE_threads_stub(inst);
    UE = PHY_vars_UE_g[inst][0];

    /*if (oaisim_flag == 0) {
      ret = openair0_device_load(&(UE->rfdevice), &openair0_cfg[0]);
      if (ret !=0){
	exit_fun("Error loading device library");
      }
    }*/
    //UE->rfdevice.host_type = RAU_HOST;
    //    UE->rfdevice.type      = NONE_DEV;

    /*PHY_VARS_UE *UE = PHY_vars_UE_g[inst][0];
    AssertFatal(0 == pthread_create(&UE->proc.pthread_ue,
                                    &UE->proc.attr_ue,
                                    UE_thread,
                                    (void*)UE), "");*/
  }

  printf("UE threads created \n");
#if 0
#if defined(ENABLE_USE_MME)
  extern volatile int start_UE;
  while (start_UE == 0) {
    sleep(1);
  }
#endif
#endif
}




321 322
/*!
 * \brief This is the UE synchronize thread.
323
 * It performs band scanning and synchonization.
324 325 326
 * \param arg is a pointer to a \ref PHY_VARS_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */
laurent's avatar
laurent committed
327

328 329
static void *UE_thread_synch(void *arg)
{
330 331 332
  static int UE_thread_synch_retval;
  int i, hw_slot_offset;
  PHY_VARS_UE *UE = (PHY_VARS_UE*) arg;
333 334
  int current_band = 0;
  int current_offset = 0;
335
  sync_mode_t sync_mode = pbch;
336
  int CC_id = UE->CC_id;
337 338
  int ind;
  int found;
339
  int freq_offset=0;
340
  char threadname[128];
341 342 343

  UE->is_synchronized = 0;
  printf("UE_thread_sync in with PHY_vars_UE %p\n",arg);
344

345
   cpu_set_t cpuset;
346
  CPU_ZERO(&cpuset);
347 348 349 350 351
  if ( threads.iq != -1 )
    CPU_SET(threads.iq, &cpuset);
  // this thread priority must be lower that the main acquisition thread
  sprintf(threadname, "sync UE %d\n", UE->Mod_id);
  init_thread(100000, 500000, FIFO_PRIORITY-1, &cpuset, threadname);
352
  
353
  printf("starting UE synch thread (IC %d)\n",UE->proc.instance_cnt_synch);
354 355
  ind = 0;
  found = 0;
356 357


358 359
  if (UE->UE_scan == 0) {
    do  {
360
      current_band = eutra_bands[ind].band;
knopp's avatar
 
knopp committed
361
      printf( "Scanning band %d, dl_min %"PRIu32", ul_min %"PRIu32"\n", current_band, eutra_bands[ind].dl_min,eutra_bands[ind].ul_min);
362

363
      if ((eutra_bands[ind].dl_min <= UE->frame_parms.dl_CarrierFreq) && (eutra_bands[ind].dl_max >= UE->frame_parms.dl_CarrierFreq)) {
364 365
	for (i=0; i<4; i++)
	  uplink_frequency_offset[CC_id][i] = eutra_bands[ind].ul_min - eutra_bands[ind].dl_min;
366 367 368 369

        found = 1;
        break;
      }
370

371
      ind++;
372 373
    } while (ind < sizeof(eutra_bands) / sizeof(eutra_bands[0]));
  
374 375
    if (found == 0) {
      exit_fun("Can't find EUTRA band for frequency");
376
      return &UE_thread_synch_retval;
377
    }
378

379

380
    LOG_I( PHY, "[SCHED][UE] Check absolute frequency DL %"PRIu32", UL %"PRIu32" (oai_exit %d, rx_num_channels %d)\n", UE->frame_parms.dl_CarrierFreq, UE->frame_parms.ul_CarrierFreq,oai_exit, openair0_cfg[0].rx_num_channels);
381

382
    for (i=0;i<openair0_cfg[UE->rf_map.card].rx_num_channels;i++) {
383 384
      openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = UE->frame_parms.dl_CarrierFreq;
      openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = UE->frame_parms.ul_CarrierFreq;
385 386 387
      openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
      if (uplink_frequency_offset[CC_id][i] != 0) // 
	openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_FDD;
388
      else //FDD
389
	openair0_cfg[UE->rf_map.card].duplex_mode = duplex_mode_TDD;
390 391
    }

392
    sync_mode = pbch;
393

394
  } else if  (UE->UE_scan == 1) {
395
    current_band=0;
396

397 398
    for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
      downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[CC_id].dl_min;
399 400
      uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] =
	bands_to_scan.band_info[CC_id].ul_min-bands_to_scan.band_info[CC_id].dl_min;
401
      openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
402 403
      openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
	downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
404
      openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
405 406
    }
  }
407

408 409 410
  while (sync_var<0)     
    pthread_cond_wait(&sync_cond, &sync_mutex);   
  pthread_mutex_unlock(&sync_mutex);   
knopp's avatar
knopp committed
411

412
  printf("Started device, unlocked sync_mutex (UE_sync_thread)\n");   
413

414 415 416
  if (UE->rfdevice.trx_start_func(&UE->rfdevice) != 0 ) {     
    LOG_E(HW,"Could not start the device\n");     
    oai_exit=1;   
knopp's avatar
knopp committed
417 418
  }

419
  while (oai_exit==0) {
420 421
    AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
    while (UE->proc.instance_cnt_synch < 0)
422
      // the thread waits here most of the time
423
      pthread_cond_wait( &UE->proc.cond_synch, &UE->proc.mutex_synch );
424 425
    AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");
    
426
    switch (sync_mode) {
427
    case pss:
428 429
      LOG_I(PHY,"[SCHED][UE] Scanning band %d (%d), freq %u\n",bands_to_scan.band_info[current_band].band, current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
      lte_sync_timefreq(UE,current_band,bands_to_scan.band_info[current_band].dl_min+current_offset);
430
      current_offset += 20000000; // increase by 20 MHz
431
      
432
      if (current_offset > bands_to_scan.band_info[current_band].dl_max-bands_to_scan.band_info[current_band].dl_min) {
433
	current_band++;
laurent's avatar
laurent committed
434 435
                current_offset=0;
            }
436

laurent's avatar
laurent committed
437 438 439 440
            if (current_band==bands_to_scan.nbands) {
                current_band=0;
                oai_exit=1;
            }
441

laurent's avatar
laurent committed
442 443 444
            for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                downlink_frequency[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].dl_min+current_offset;
                uplink_frequency_offset[UE->rf_map.card][UE->rf_map.chain+i] = bands_to_scan.band_info[current_band].ul_min-bands_to_scan.band_info[0].dl_min + current_offset;
445

laurent's avatar
laurent committed
446 447 448 449 450 451
                openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i];
                openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i];
                openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;
                if (UE->UE_scan_carrier) {
                    openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
                }
452
	    }
453

454
	    break;
455
 
456
    case pbch:
457

Cedric Roux's avatar
Cedric Roux committed
458
#if DISABLE_LOG_X
459
            printf("[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
Cedric Roux's avatar
Cedric Roux committed
460 461 462
#else
            LOG_I(PHY, "[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
#endif
laurent's avatar
laurent committed
463 464 465 466 467 468 469 470 471 472 473
            if (initial_sync( UE, UE->mode ) == 0) {

                hw_slot_offset = (UE->rx_offset<<1) / UE->frame_parms.samples_per_tti;
                LOG_I( HW, "Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %d (DL %u, UL %u), UE_scan_carrier %d\n",
                       hw_slot_offset,
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset,
                       UE->UE_scan_carrier );

474

laurent's avatar
laurent committed
475 476 477
                    // rerun with new cell parameters and frequency-offset
                    for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                        openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
478
			if (UE->UE_scan_carrier == 1) {
laurent's avatar
laurent committed
479
                        if (freq_offset >= 0)
480
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] += abs(UE->common_vars.freq_offset);
laurent's avatar
laurent committed
481
                        else
482
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] -= abs(UE->common_vars.freq_offset);
laurent's avatar
laurent committed
483 484
                        openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
                            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i]+uplink_frequency_offset[CC_id][i];
laurent's avatar
laurent committed
485 486 487
                        downlink_frequency[CC_id][i] = openair0_cfg[CC_id].rx_freq[i];
                        freq_offset=0;
                    }
488
	  }
489

laurent's avatar
laurent committed
490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516
                    // reconfigure for potentially different bandwidth
                    switch(UE->frame_parms.N_RB_DL) {
                    case 6:
                        openair0_cfg[UE->rf_map.card].sample_rate =1.92e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =.96e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =.96e6;
                        //            openair0_cfg[0].rx_gain[0] -= 12;
                        break;
                    case 25:
                        openair0_cfg[UE->rf_map.card].sample_rate =7.68e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =2.5e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =2.5e6;
                        //            openair0_cfg[0].rx_gain[0] -= 6;
                        break;
                    case 50:
                        openair0_cfg[UE->rf_map.card].sample_rate =15.36e6;
                        openair0_cfg[UE->rf_map.card].rx_bw          =5.0e6;
                        openair0_cfg[UE->rf_map.card].tx_bw          =5.0e6;
                        //            openair0_cfg[0].rx_gain[0] -= 3;
                        break;
                    case 100:
                        openair0_cfg[UE->rf_map.card].sample_rate=30.72e6;
                        openair0_cfg[UE->rf_map.card].rx_bw=10.0e6;
                        openair0_cfg[UE->rf_map.card].tx_bw=10.0e6;
                        //            openair0_cfg[0].rx_gain[0] -= 0;
                        break;
                    }
517

laurent's avatar
laurent committed
518 519
                    UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
                    //UE->rfdevice.trx_set_gains_func(&openair0,&openair0_cfg[0]);
520
                    //UE->rfdevice.trx_stop_func(&UE->rfdevice);
laurent's avatar
laurent committed
521 522
                    sleep(1);
                    init_frame_parms(&UE->frame_parms,1);
523
                    /*if (UE->rfdevice.trx_start_func(&UE->rfdevice) != 0 ) {
laurent's avatar
laurent committed
524 525
                        LOG_E(HW,"Could not start the device\n");
                        oai_exit=1;
526
                    }*/
527 528 529 530

		if (UE->UE_scan_carrier == 1) {

		  UE->UE_scan_carrier = 0;
laurent's avatar
laurent committed
531
                } else {
laurent's avatar
laurent committed
532
                    AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
laurent's avatar
laurent committed
533
                    UE->is_synchronized = 1;
laurent's avatar
laurent committed
534
                    AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");
laurent's avatar
laurent committed
535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551

                    if( UE->mode == rx_dump_frame ) {
                        FILE *fd;
                        if ((UE->proc.proc_rxtx[0].frame_rx&1) == 0) {  // this guarantees SIB1 is present
                            if ((fd = fopen("rxsig_frame0.dat","w")) != NULL) {
                                fwrite((void*)&UE->common_vars.rxdata[0][0],
                                       sizeof(int32_t),
                                       10*UE->frame_parms.samples_per_tti,
                                       fd);
                                LOG_I(PHY,"Dummping Frame ... bye bye \n");
                                fclose(fd);
                                exit(0);
                            } else {
                                LOG_E(PHY,"Cannot open file for writing\n");
                                exit(0);
                            }
                        } else {
laurent's avatar
laurent committed
552
                            AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
laurent's avatar
laurent committed
553
                            UE->is_synchronized = 0;
laurent's avatar
laurent committed
554 555
                            AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");

laurent's avatar
laurent committed
556 557 558 559 560 561 562
                        }
                    }
                }
            } else {
                // initial sync failed
                // calculate new offset and try again
                if (UE->UE_scan_carrier == 1) {
laurent's avatar
laurent committed
563
                    if (freq_offset >= 0)
laurent's avatar
laurent committed
564
                        freq_offset += 100;
laurent's avatar
laurent committed
565
                    freq_offset *= -1;
laurent's avatar
laurent committed
566 567 568 569 570 571 572 573 574 575 576 577 578

                    if (abs(freq_offset) > 7500) {
                        LOG_I( PHY, "[initial_sync] No cell synchronization found, abandoning\n" );
                        FILE *fd;
                        if ((fd = fopen("rxsig_frame0.dat","w"))!=NULL) {
                            fwrite((void*)&UE->common_vars.rxdata[0][0],
                                   sizeof(int32_t),
                                   10*UE->frame_parms.samples_per_tti,
                                   fd);
                            LOG_I(PHY,"Dummping Frame ... bye bye \n");
                            fclose(fd);
                            exit(0);
                        }
579
                        AssertFatal(1==0,"No cell synchronization found, abandoning");
laurent's avatar
laurent committed
580 581 582
                        return &UE_thread_synch_retval; // not reached
                    }
                }
Cedric Roux's avatar
Cedric Roux committed
583
#if DISABLE_LOG_X
584
                printf("[initial_sync] trying carrier off %d Hz, rxgain %d (DL %u, UL %u)\n",
laurent's avatar
laurent committed
585 586 587 588
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
Cedric Roux's avatar
Cedric Roux committed
589 590 591 592 593 594 595
#else
                LOG_I(PHY, "[initial_sync] trying carrier off %d Hz, rxgain %d (DL %u, UL %u)\n",
                       freq_offset,
                       UE->rx_total_gain_dB,
                       downlink_frequency[0][0]+freq_offset,
                       downlink_frequency[0][0]+uplink_frequency_offset[0][0]+freq_offset );
#endif
laurent's avatar
laurent committed
596 597 598 599 600

                for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
                    openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+freq_offset;
                    openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = downlink_frequency[CC_id][i]+uplink_frequency_offset[CC_id][i]+freq_offset;
                    openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
laurent's avatar
laurent committed
601
                    if (UE->UE_scan_carrier==1)
laurent's avatar
laurent committed
602 603 604 605 606 607 608 609 610
                        openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
                }
                UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
            }// initial_sync=0
            break;
        case si:
        default:
            break;
        }
611

laurent's avatar
laurent committed
612
        AssertFatal ( 0== pthread_mutex_lock(&UE->proc.mutex_synch), "");
laurent's avatar
laurent committed
613 614
        // indicate readiness
        UE->proc.instance_cnt_synch--;
laurent's avatar
laurent committed
615
        AssertFatal ( 0== pthread_mutex_unlock(&UE->proc.mutex_synch), "");
616

laurent's avatar
laurent committed
617 618
        VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_UE_THREAD_SYNCH, 0 );
    }  // while !oai_exit
619

laurent's avatar
laurent committed
620
    return &UE_thread_synch_retval;
621 622
}

623
/*!
624
 * \brief This is the UE thread for RX subframe n and TX subframe n+4.
625
 * This thread performs the phy_procedures_UE_RX() on every received slot.
laurent's avatar
laurent committed
626
 * then, if TX is enabled it performs TX for n+4.
627 628 629
 * \param arg is a pointer to a \ref PHY_VARS_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */
630

laurent's avatar
laurent committed
631 632
static void *UE_thread_rxn_txnp4(void *arg) {
    static __thread int UE_thread_rxtx_retval;
633 634 635
    struct rx_tx_thread_data *rtd = arg;
    UE_rxtx_proc_t *proc = rtd->proc;
    PHY_VARS_UE    *UE   = rtd->UE;
laurent's avatar
laurent committed
636 637
    int ret;

638
    proc->instance_cnt_rxtx=-1;
laurent's avatar
laurent committed
639 640
    proc->subframe_rx=proc->sub_frame_start;

641 642
    char threadname[256];
    sprintf(threadname,"UE_%d_proc_%d", UE->Mod_id, proc->sub_frame_start);
laurent's avatar
laurent committed
643 644
    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);
645

Bilel's avatar
Bilel committed
646 647 648 649 650
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 0 && threads.one != -1 )
        CPU_SET(threads.one, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 1 && threads.two != -1 )
        CPU_SET(threads.two, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 2 && threads.three != -1 )
651
        CPU_SET(threads.three, &cpuset);
Bilel's avatar
Bilel committed
652
            //CPU_SET(threads.three, &cpuset);
laurent's avatar
laurent committed
653
    init_thread(900000,1000000 , FIFO_PRIORITY-1, &cpuset,
654
                threadname);
laurent's avatar
laurent committed
655 656

    while (!oai_exit) {
657 658 659 660 661 662 663 664 665 666 667 668
        if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("nothing to add");
        }
        while (proc->instance_cnt_rxtx < 0) {
          // most of the time, the thread is waiting here
          pthread_cond_wait( &proc->cond_rxtx, &proc->mutex_rxtx );
        }
        if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXn_TXnp4\n" );
          exit_fun("nothing to add");
        }
laurent's avatar
laurent committed
669

laurent's avatar
laurent committed
670 671 672 673
        initRefTimes(t2);
        initRefTimes(t3);
        pickTime(current);
        updateTimes(proc->gotIQs, &t2, 10000, "Delay to wake up UE_Thread_Rx (case 2)");
laurent's avatar
laurent committed
674

675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843
        // Process Rx data for one sub-frame
        lte_subframe_t sf_type = subframe_select( &UE->frame_parms, proc->subframe_rx);
        if ((sf_type == SF_DL) ||
                (UE->frame_parms.frame_type == FDD) ||
                (sf_type == SF_S)) {

            if (UE->frame_parms.frame_type == TDD) {
                LOG_D(PHY, "%s,TDD%d,%s: calling UE_RX\n",
                      threadname,
                      UE->frame_parms.tdd_config,
                      (sf_type==SF_DL? "SF_DL" :
                       (sf_type==SF_UL? "SF_UL" :
                        (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
            } else {
                LOG_D(PHY, "%s,%s,%s: calling UE_RX\n",
                      threadname,
                      (UE->frame_parms.frame_type==FDD? "FDD":
                       (UE->frame_parms.frame_type==TDD? "TDD":"UNKNOWN_DUPLEX_MODE")),
                      (sf_type==SF_DL? "SF_DL" :
                       (sf_type==SF_UL? "SF_UL" :
                        (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
            }
#ifdef UE_SLOT_PARALLELISATION
            phy_procedures_slot_parallelization_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#else
            phy_procedures_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#endif
        }

#if UE_TIMING_TRACE
        start_meas(&UE->generic_stat);
#endif
        if (UE->mac_enabled==1) {

            ret = ue_scheduler(UE->Mod_id,
			       proc->frame_rx,
			       proc->subframe_rx,
			       proc->frame_tx,
			       proc->subframe_tx,
			       subframe_select(&UE->frame_parms,proc->subframe_tx),
			       0,
			       0/*FIXME CC_id*/);
            if ( ret != CONNECTION_OK) {
                char *txt;
                switch (ret) {
                case CONNECTION_LOST:
                    txt="RRC Connection lost, returning to PRACH";
                    break;
                case PHY_RESYNCH:
                    txt="RRC Connection lost, trying to resynch";
                    break;
                case RESYNCH:
                    txt="return to PRACH and perform a contention-free access";
                    break;
                default:
                    txt="UNKNOWN RETURN CODE";
                };
                LOG_E( PHY, "[UE %"PRIu8"] Frame %"PRIu32", subframe %u %s\n",
                       UE->Mod_id, proc->frame_rx, proc->subframe_tx,txt );
            }
        }
#if UE_TIMING_TRACE
        stop_meas(&UE->generic_stat);
#endif


        // Prepare the future Tx data

        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_UL) ||
	    (UE->frame_parms.frame_type == FDD) )
            if (UE->mode != loop_through_memory)
                phy_procedures_UE_TX(UE,proc,0,0,UE->mode,no_relay);



        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_S) &&
                (UE->frame_parms.frame_type == TDD))
            if (UE->mode != loop_through_memory)
                phy_procedures_UE_S_TX(UE,0,0,no_relay);
        updateTimes(current, &t3, 10000, "Delay to process sub-frame (case 3)");

        if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
        proc->instance_cnt_rxtx--;
        if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
    }

// thread finished
    free(arg);
    return &UE_thread_rxtx_retval;
}





/*!
 * \brief This is the UE thread for RX subframe n and TX subframe n+4.
 * This thread performs the phy_procedures_UE_RX() on every received slot.
 * then, if TX is enabled it performs TX for n+4.
 * \param arg is a pointer to a \ref PHY_VARS_UE structure.
 * \returns a pointer to an int. The storage is not on the heap and must not be freed.
 */

static void *UE_phy_stub_thread_rxn_txnp4(void *arg) {
	module_id_t Mod_id = 0;
    static __thread int UE_thread_rxtx_retval;
    struct rx_tx_thread_data *rtd = arg;
    UE_rxtx_proc_t *proc = rtd->proc;
    PHY_VARS_UE    *UE   = rtd->UE;
    int ret;

    // Panos: Call (Sched_Rsp_t) get_nfapi_sched_response(UE->Mod_ID) to get all
    //sched_response config messages which concern the specific UE. Inside this
    //function we should somehow make the translation of rnti to Mod_ID.

    //proc->instance_cnt_rxtx=-1;

    phy_stub_ticking->ticking_var = -1;
    proc->subframe_rx=proc->sub_frame_start;

    char threadname[256];
    sprintf(threadname,"UE_%d_proc_%d", UE->Mod_id, proc->sub_frame_start);
    cpu_set_t cpuset;
    CPU_ZERO(&cpuset);

    if ( (proc->sub_frame_start+1)%RX_NB_TH == 0 && threads.one != -1 )
        CPU_SET(threads.one, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 1 && threads.two != -1 )
        CPU_SET(threads.two, &cpuset);
    if ( (proc->sub_frame_start+1)%RX_NB_TH == 2 && threads.three != -1 )
        CPU_SET(threads.three, &cpuset);
            //CPU_SET(threads.three, &cpuset);
    init_thread(900000,1000000 , FIFO_PRIORITY-1, &cpuset,
                threadname);

    while (!oai_exit) {
        if (pthread_mutex_lock(&phy_stub_ticking->mutex_ticking) != 0) {
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("nothing to add");
        }
        while (phy_stub_ticking->ticking_var < 0) {
          // most of the time, the thread is waiting here
          //pthread_cond_wait( &proc->cond_rxtx, &proc->mutex_rxtx );
          pthread_cond_wait( &phy_stub_ticking->cond_ticking, &phy_stub_ticking->mutex_ticking);
        }
        if (pthread_mutex_unlock(&phy_stub_ticking->mutex_ticking) != 0) {
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXn_TXnp4\n" );
          exit_fun("nothing to add");
        }

        proc->subframe_rx=timer_subframe;
        proc->frame_rx = timer_frame;
        proc->subframe_tx=(timer_subframe+4)%10;
        proc->frame_tx = proc->frame_rx + (proc->subframe_rx>5?1:0);


        // Panos: Guessing that the next 4 lines are not needed for the phy_stub mode.
        /*initRefTimes(t2);
        initRefTimes(t3);
        pickTime(current);
        updateTimes(proc->gotIQs, &t2, 10000, "Delay to wake up UE_Thread_Rx (case 2)");*/


laurent's avatar
laurent committed
844 845 846 847 848 849 850 851
        // Process Rx data for one sub-frame
        lte_subframe_t sf_type = subframe_select( &UE->frame_parms, proc->subframe_rx);
        if ((sf_type == SF_DL) ||
                (UE->frame_parms.frame_type == FDD) ||
                (sf_type == SF_S)) {

            if (UE->frame_parms.frame_type == TDD) {
                LOG_D(PHY, "%s,TDD%d,%s: calling UE_RX\n",
852
                      threadname,
laurent's avatar
laurent committed
853 854 855 856 857 858
                      UE->frame_parms.tdd_config,
                      (sf_type==SF_DL? "SF_DL" :
                       (sf_type==SF_UL? "SF_UL" :
                        (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
            } else {
                LOG_D(PHY, "%s,%s,%s: calling UE_RX\n",
859
                      threadname,
laurent's avatar
laurent committed
860 861 862 863 864 865
                      (UE->frame_parms.frame_type==FDD? "FDD":
                       (UE->frame_parms.frame_type==TDD? "TDD":"UNKNOWN_DUPLEX_MODE")),
                      (sf_type==SF_DL? "SF_DL" :
                       (sf_type==SF_UL? "SF_UL" :
                        (sf_type==SF_S ? "SF_S"  : "UNKNOWN_SF_TYPE"))));
            }
Panos Matzakos's avatar
Panos Matzakos committed
866

867
/*
868 869 870
#ifdef UE_SLOT_PARALLELISATION
            phy_procedures_slot_parallelization_UE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#else
871
*/
872 873 874 875
			// Panos: Substitute call to phy_procedures Rx with call to phy_stub functions in order to trigger
            // UE Rx procedures directly at the MAC layer, based on the received nfapi requests from the vnf (eNB).
            // Hardcode Mod_id for now. Will be changed later.

876 877
            // Panos: is this the right place to call oai_subframe_indication to invoke p7 nfapi callbacks here?
            oai_subframe_ind(proc->frame_rx, proc->subframe_rx);
878 879 880
            printf("Panos-D: UE_phy_stub_thread_rxn_txnp4 after oai_subframe_ind \n");
            if(UE_mac_inst[Mod_id].tx_req!= NULL){
            	printf("Panos-D: UE_phy_stub_thread_rxn_txnp4 after oai_subframe_ind 2\n");
881
            	tx_req_UE_MAC(UE_mac_inst[Mod_id].tx_req);
882 883 884
            }
            if(UE_mac_inst[Mod_id].dl_config_req!= NULL) {
            	printf("Panos-D: UE_phy_stub_thread_rxn_txnp4 after oai_subframe_ind 3\n");
885
            	dl_config_req_UE_MAC(UE_mac_inst[Mod_id].dl_config_req);
886 887 888
            }
            if(UE_mac_inst[Mod_id].hi_dci0_req!= NULL){
            	printf("Panos-D: UE_phy_stub_thread_rxn_txnp4 after oai_subframe_ind 4\n");
889
            	hi_dci0_req_UE_MAC(UE_mac_inst[Mod_id].hi_dci0_req);
890
            }
891 892

//#endif
laurent's avatar
laurent committed
893
        }
Bilel's avatar
Bilel committed
894

Gabriel's avatar
Gabriel committed
895
#if UE_TIMING_TRACE
Bilel's avatar
Bilel committed
896
        start_meas(&UE->generic_stat);
Gabriel's avatar
Gabriel committed
897
#endif
laurent's avatar
laurent committed
898 899
        if (UE->mac_enabled==1) {

900 901 902 903 904 905 906 907
            ret = ue_scheduler(UE->Mod_id,
			       proc->frame_rx,
			       proc->subframe_rx,
			       proc->frame_tx,
			       proc->subframe_tx,
			       subframe_select(&UE->frame_parms,proc->subframe_tx),
			       0,
			       0/*FIXME CC_id*/);
laurent's avatar
laurent committed
908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926
            if ( ret != CONNECTION_OK) {
                char *txt;
                switch (ret) {
                case CONNECTION_LOST:
                    txt="RRC Connection lost, returning to PRACH";
                    break;
                case PHY_RESYNCH:
                    txt="RRC Connection lost, trying to resynch";
                    break;
                case RESYNCH:
                    txt="return to PRACH and perform a contention-free access";
                    break;
                default:
                    txt="UNKNOWN RETURN CODE";
                };
                LOG_E( PHY, "[UE %"PRIu8"] Frame %"PRIu32", subframe %u %s\n",
                       UE->Mod_id, proc->frame_rx, proc->subframe_tx,txt );
            }
        }
Gabriel's avatar
Gabriel committed
927
#if UE_TIMING_TRACE
Bilel's avatar
Bilel committed
928
        stop_meas(&UE->generic_stat);
Gabriel's avatar
Gabriel committed
929
#endif
Bilel's avatar
Bilel committed
930

931

laurent's avatar
laurent committed
932
        // Prepare the future Tx data
933

laurent's avatar
laurent committed
934
        if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_UL) ||
935
	    (UE->frame_parms.frame_type == FDD) )
936
            if (UE->mode != loop_through_memory){
937 938 939
            	// Panos: Substitute call to phy_procedures Tx with call to phy_stub functions in order to trigger
                // UE Tx procedures directly at the MAC layer, based on the received ul_config requests from the vnf (eNB).
            	// Generate UL_indications which corresponf to UL traffic.
940
            	if(UE_mac_inst[Mod_id].ul_config_req!= NULL){
941 942 943
            		ul_config_req_UE_MAC(UE_mac_inst[Mod_id].ul_config_req);
            		UL_indication(UL_INFO);
            	}
944 945
            }

946 947


948

949
        /*if ((subframe_select( &UE->frame_parms, proc->subframe_tx) == SF_S) &&
laurent's avatar
laurent committed
950 951 952
                (UE->frame_parms.frame_type == TDD))
            if (UE->mode != loop_through_memory)
                phy_procedures_UE_S_TX(UE,0,0,no_relay);
953
        updateTimes(current, &t3, 10000, "Delay to process sub-frame (case 3)");*/
954

955 956
        //if (pthread_mutex_lock(&proc->mutex_rxtx) != 0) {
        if (pthread_mutex_lock(&phy_stub_ticking->mutex_ticking) != 0) {
957 958 959
          LOG_E( PHY, "[SCHED][UE] error locking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
960 961 962 963 964

        //proc->instance_cnt_rxtx--;
        phy_stub_ticking->ticking_var--;
        //if (pthread_mutex_unlock(&proc->mutex_rxtx) != 0) {
        if (pthread_mutex_unlock(&phy_stub_ticking->mutex_ticking) != 0) {
965 966 967
          LOG_E( PHY, "[SCHED][UE] error unlocking mutex for UE RXTX\n" );
          exit_fun("noting to add");
        }
968 969
    }

laurent's avatar
laurent committed
970
// thread finished