main.py

		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def TerminateCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Disabling the Radio
		self.command('AT+CFUN=0', 'OK', 5)
		logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def AttachCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Enabling the Radio
		self.command('AT+CFUN=1', 'SIMSTORE,READY', 5)
		logging.debug('\u001B[1m Cellular Functionality enabled\u001B[0m')
		time.sleep(4)
		# We should check if we register
		count = 0
		attach_cnt = 0
		attach_status = False
		while count < 5:
			self.command('AT+CEREG?', 'OK', 5)
			result = re.search('CEREG: 2,(?P<state>[0-9\-]+),', str(self.ssh.before))
			if result is not None:
				mDataConnectionState = int(result.group('state'))
				if mDataConnectionState is not None:
					if mDataConnectionState == 1:
						count = 10
						attach_status = True
						result = re.search('CEREG: 2,1,"(?P<networky>[0-9A-Z]+)","(?P<networkz>[0-9A-Z]+)"', str(self.ssh.before))
						if result is not None:
							networky = result.group('networky')
							networkz = result.group('networkz')
							logging.debug('\u001B[1m CAT-M module attached to eNB (' + str(networky) + '/' + str(networkz) + ')\u001B[0m')
						else:
							logging.debug('\u001B[1m CAT-M module attached to eNB\u001B[0m')
					else:
						logging.debug('+CEREG: 2,' + str(mDataConnectionState))
						attach_cnt = attach_cnt + 1
			else:
				logging.debug(str(self.ssh.before))
				attach_cnt = attach_cnt + 1
			count = count + 1
			time.sleep(1)
		if attach_status:
			self.command('AT+CESQ', 'OK', 5)
			result = re.search('CESQ: 99,99,255,255,(?P<rsrq>[0-9]+),(?P<rsrp>[0-9]+)', str(self.ssh.before))
			if result is not None:
				nRSRQ = int(result.group('rsrq'))
				nRSRP = int(result.group('rsrp'))
				if (nRSRQ is not None) and (nRSRP is not None):
					logging.debug('    RSRQ = ' + str(-20+(nRSRQ/2)) + ' dB')
					logging.debug('    RSRP = ' + str(-140+nRSRP) + ' dBm')
		self.close()
		self.picocom_closure = False
		html_queue = SimpleQueue()
		self.checkDevTTYisUnlocked()
		if attach_status:
			html_cell = '<pre style="background-color:white">CAT-M module\nAttachment Completed in ' + str(attach_cnt+4) + ' seconds'
			if (nRSRQ is not None) and (nRSRP is not None):
				html_cell += '\n   RSRQ = ' + str(-20+(nRSRQ/2)) + ' dB'
				html_cell += '\n   RSRP = ' + str(-140+nRSRP) + ' dBm</pre>'
			else:
				html_cell += '</pre>'
			html_queue.put(html_cell)
			self.CreateHtmlTestRowQueue('N/A', 'OK', 1, html_queue)
		else:
			html_cell = '<pre style="background-color:white">CAT-M module\nAttachment Failed</pre>'
			html_queue.put(html_cell)
			self.CreateHtmlTestRowQueue('N/A', 'KO', 1, html_queue)

	def PingCatM(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		check_eNB = True
		check_OAI_UE = False
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
			self.prematureExit = True
			return
		try:
			statusQueue = SimpleQueue()
			lock = Lock()
			self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
			self.command('cd scripts', '\$', 5)
			if re.match('OAI', self.EPCType, re.IGNORECASE):
				logging.debug('Using the OAI EPC HSS: not implemented yet')
				self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
				self.CreateHtmlTabFooter(False)
				sys.exit(1)
			else:
				self.command('egrep --color=never "Allocated ipv4 addr" /opt/ltebox/var/log/xGwLog.0', '\$', 5)
				result = re.search('Allocated ipv4 addr: (?P<ipaddr>[0-9\.]+) from Pool', str(self.ssh.before))
				if result is not None:
					moduleIPAddr = result.group('ipaddr')
				else:
					return
			ping_time = re.findall("-c (\d+)",str(self.ping_args))
			device_id = 'catm'
			ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' ' + str(moduleIPAddr) + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '_' + device_id + '.log', '\$', int(ping_time[0])*1.5)
			# TIMEOUT CASE
			if ping_status < 0:
				message = 'Ping with UE (' + str(moduleIPAddr) + ') crashed due to TIMEOUT!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
				return
			result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
			if result is None:
				message = 'Packet Loss Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
				return
			packetloss = result.group('packetloss')
			if float(packetloss) == 100:
				message = 'Packet Loss is 100%'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
				return
			result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
			if result is None:
				message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, moduleIPAddr, device_id, statusQueue, message)
				return
			rtt_min = result.group('rtt_min')
			rtt_avg = result.group('rtt_avg')
			rtt_max = result.group('rtt_max')
			pal_msg = 'Packet Loss : ' + packetloss + '%'
			min_msg = 'RTT(Min)    : ' + rtt_min + ' ms'
			avg_msg = 'RTT(Avg)    : ' + rtt_avg + ' ms'
			max_msg = 'RTT(Max)    : ' + rtt_max + ' ms'
			lock.acquire()
			logging.debug('\u001B[1;37;44m ping result (' + moduleIPAddr + ') \u001B[0m')
			logging.debug('\u001B[1;34m    ' + pal_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + min_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + avg_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + max_msg + '\u001B[0m')
			qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
			packetLossOK = True
			if packetloss is not None:
				if float(packetloss) > float(self.ping_packetloss_threshold):
					qMsg += '\nPacket Loss too high'
					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
					packetLossOK = False
				elif float(packetloss) > 0:
					qMsg += '\nPacket Loss is not 0%'
					logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
			lock.release()
			self.close()
			html_cell = '<pre style="background-color:white">CAT-M module\nIP Address  : ' + moduleIPAddr + '\n' + qMsg + '</pre>'
			statusQueue.put(html_cell)
			if (packetLossOK):
				self.CreateHtmlTestRowQueue(self.ping_args, 'OK', 1, statusQueue)
			else:
				self.CreateHtmlTestRowQueue(self.ping_args, 'KO', 1, statusQueue)
				self.AutoTerminateUEandeNB()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def AttachUE_common(self, device_id, statusQueue, lock):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			if device_id == '84B7N16418004022':
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/on"', '\$', 60)
			else:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
			time.sleep(2)
			max_count = 45
			count = max_count
			while count > 0:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
				if result is None:
					logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
					lock.acquire()
					statusQueue.put(-1)
					statusQueue.put(device_id)
					statusQueue.put('mDataConnectionState Not Found!')
					lock.release()
					break
				mDataConnectionState = int(result.group('state'))
				if mDataConnectionState == 2:
					logging.debug('\u001B[1mUE (' + device_id + ') Attach Completed\u001B[0m')
					lock.acquire()
					statusQueue.put(max_count - count)
					statusQueue.put(device_id)
					statusQueue.put('Attach Completed')
					lock.release()
					break
				count = count - 1
				if count == 15 or count == 30:
					logging.debug('\u001B[1;30;43m Retry UE (' + device_id + ') Flight Mode Off \u001B[0m')
					if device_id == '84B7N16418004022':
						self.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/off"', '\$', 60)
					else:
						self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
					time.sleep(0.5)
					if device_id == '84B7N16418004022':
						self.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/on"', '\$', 60)
					else:
						self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
					time.sleep(0.5)
				logging.debug('\u001B[1mWait UE (' + device_id + ') a second until mDataConnectionState=2 (' + str(max_count-count) + ' times)\u001B[0m')
				time.sleep(1)
			if count == 0:
				logging.debug('\u001B[1;37;41m UE (' + device_id + ') Attach Failed \u001B[0m')
				lock.acquire()
				statusQueue.put(-1)
				statusQueue.put(device_id)
				statusQueue.put('Attach Failed')
				lock.release()
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def AttachUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		check_eNB = True
		check_OAI_UE = False
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.AutoTerminateUEandeNB()
			return
		multi_jobs = []
		status_queue = SimpleQueue()
		lock = Lock()
		nb_ue_to_connect = 0
		for device_id in self.UEDevices:
			if (self.nbMaxUEtoAttach == -1) or (nb_ue_to_connect < self.nbMaxUEtoAttach):
				self.UEDevicesStatus[nb_ue_to_connect] = UE_STATUS_ATTACHING
				p = Process(target = self.AttachUE_common, args = (device_id, status_queue, lock,))
				p.daemon = True
				p.start()
				multi_jobs.append(p)
			nb_ue_to_connect = nb_ue_to_connect + 1
		for job in multi_jobs:
			job.join()

		if (status_queue.empty()):
			self.CreateHtmlTestRow('N/A', 'KO', ALL_PROCESSES_OK)
			self.AutoTerminateUEandeNB()
			return
		else:
			attach_status = True
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					attach_status = False
				device_id = status_queue.get()
				message = status_queue.get()
				if (count < 0):
					html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + '</pre>'
				else:
					html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + ' in ' + str(count + 2) + ' seconds</pre>'
				html_queue.put(html_cell)
			if (attach_status):
				cnt = 0
				while cnt < len(self.UEDevices):
					if self.UEDevicesStatus[cnt] == UE_STATUS_ATTACHING:
						self.UEDevicesStatus[cnt] = UE_STATUS_ATTACHED
					cnt += 1
				self.CreateHtmlTestRowQueue('N/A', 'OK', len(self.UEDevices), html_queue)
				result = re.search('T_stdout', str(self.Initialize_eNB_args))
				if result is not None:
					logging.debug('Waiting 5 seconds to fill up record file')
					time.sleep(5)
			else:
				self.CreateHtmlTestRowQueue('N/A', 'KO', len(self.UEDevices), html_queue)
				self.AutoTerminateUEandeNB()

	def DetachUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			if device_id == '84B7N16418004022':
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell "su - root -c /data/local/tmp/off"', '\$', 60)
			else:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
			logging.debug('\u001B[1mUE (' + device_id + ') Detach Completed\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def DetachUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		check_eNB = True
		check_OAI_UE = False
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.AutoTerminateUEandeNB()
			return
		multi_jobs = []
		cnt = 0
		for device_id in self.UEDevices:
			self.UEDevicesStatus[cnt] = UE_STATUS_DETACHING
			p = Process(target = self.DetachUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
			cnt += 1
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		result = re.search('T_stdout', str(self.Initialize_eNB_args))
		if result is not None:
			logging.debug('Waiting 5 seconds to fill up record file')
			time.sleep(5)
		cnt = 0
		while cnt < len(self.UEDevices):
			self.UEDevicesStatus[cnt] = UE_STATUS_DETACHED
			cnt += 1

	def RebootUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			previousmDataConnectionStates = []
			# Save mDataConnectionState
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
			result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
			if result is None:
				logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
				sys.exit(1)
			previousmDataConnectionStates.append(int(result.group('state')))
			# Reboot UE
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell reboot', '\$', 10)
			time.sleep(60)
			previousmDataConnectionState = previousmDataConnectionStates.pop(0)
			count = 180
			while count > 0:
				count = count - 1
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
				if result is None:
					mDataConnectionState = None
				else:
					mDataConnectionState = int(result.group('state'))
					logging.debug('mDataConnectionState = ' + result.group('state'))
				if mDataConnectionState is None or (previousmDataConnectionState == 2 and mDataConnectionState != 2):
					logging.debug('\u001B[1mWait UE (' + device_id + ') a second until reboot completion (' + str(180-count) + ' times)\u001B[0m')
					time.sleep(1)
				else:
					logging.debug('\u001B[1mUE (' + device_id + ') Reboot Completed\u001B[0m')
					break
			if count == 0:
				logging.debug('\u001B[1;37;41m UE (' + device_id + ') Reboot Failed \u001B[0m')
				sys.exit(1)
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def RebootUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		check_eNB = True
		check_OAI_UE = False
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.CreateHtmlTabFooter(False)
			sys.exit(1)
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = self.RebootUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)

	def DataDisableUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			# enable data service
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell svc data disable', '\$', 60)
			logging.debug('\u001B[1mUE (' + device_id + ') Disabled Data Service\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def DataDisableUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = self.DataDisableUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)

	def DataEnableUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			# enable data service
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell svc data enable', '\$', 60)
			logging.debug('\u001B[1mUE (' + device_id + ') Enabled Data Service\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def DataEnableUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = self.DataEnableUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)

	def GetAllUEDevices(self, terminate_ue_flag):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('adb devices', '\$', 15)
		self.UEDevices = re.findall("\\\\r\\\\n([A-Za-z0-9]+)\\\\tdevice",str(self.ssh.before))
		if terminate_ue_flag == False:
			if len(self.UEDevices) == 0:
				logging.debug('\u001B[1;37;41m UE Not Found! \u001B[0m')
				sys.exit(1)
		if len(self.UEDevicesStatus) == 0:
			cnt = 0
			while cnt < len(self.UEDevices):
				self.UEDevicesStatus.append(UE_STATUS_DETACHED)
				cnt += 1
		self.close()

	def GetAllCatMDevices(self, terminate_ue_flag):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('lsusb | egrep "Future Technology Devices International, Ltd FT2232C" | sed -e "s#:.*##" -e "s# #_#g"', '\$', 15)
		self.CatMDevices = re.findall("\\\\r\\\\n([A-Za-z0-9_]+)",str(self.ssh.before))
		if terminate_ue_flag == False:
			if len(self.CatMDevices) == 0:
				logging.debug('\u001B[1;37;41m CAT-M UE Not Found! \u001B[0m')
				sys.exit(1)
		self.close()

	def CheckUEStatus_common(self, lock, device_id, statusQueue):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry', '\$', 15)
			result = re.search('mServiceState=(?P<serviceState>[0-9]+)', str(self.ssh.before))
			serviceState = 'Service State: UNKNOWN'
			if result is not None:
				lServiceState = int(result.group('serviceState'))
				if lServiceState == 3:
					serviceState = 'Service State: RADIO_POWERED_OFF'
				if lServiceState == 1:
					serviceState = 'Service State: OUT_OF_SERVICE'
				if lServiceState == 0:
					serviceState = 'Service State: IN_SERVICE'
				if lServiceState == 2:
					serviceState = 'Service State: EMERGENCY_ONLY'
			result = re.search('mDataConnectionState=(?P<dataConnectionState>[0-9]+)', str(self.ssh.before))
			dataConnectionState = 'Data State:    UNKNOWN'
			if result is not None:
				lDataConnectionState = int(result.group('dataConnectionState'))
				if lDataConnectionState == 0:
					dataConnectionState = 'Data State:    DISCONNECTED'
				if lDataConnectionState == 1:
					dataConnectionState = 'Data State:    CONNECTING'
				if lDataConnectionState == 2:
					dataConnectionState = 'Data State:    CONNECTED'
				if lDataConnectionState == 3:
					dataConnectionState = 'Data State:    SUSPENDED'
			result = re.search('mDataConnectionReason=(?P<dataConnectionReason>[0-9a-zA-Z_]+)', str(self.ssh.before))
			dataConnectionReason = 'Data Reason:   UNKNOWN'
			if result is not None:
				dataConnectionReason = 'Data Reason:   ' + result.group('dataConnectionReason')
			lock.acquire()
			logging.debug('\u001B[1;37;44m Status Check (' + str(device_id) + ') \u001B[0m')
			logging.debug('\u001B[1;34m    ' + serviceState + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + dataConnectionState + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + dataConnectionReason + '\u001B[0m')
			statusQueue.put(0)
			statusQueue.put(device_id)
			qMsg = serviceState + '\n' + dataConnectionState + '\n' + dataConnectionReason
			statusQueue.put(qMsg)
			lock.release()
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def CheckStatusUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		check_eNB = True
		check_OAI_UE = False
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.CreateHtmlTabFooter(False)
			sys.exit(1)
		multi_jobs = []
		lock = Lock()
		status_queue = SimpleQueue()
		for device_id in self.UEDevices:
			p = Process(target = self.CheckUEStatus_common, args = (lock,device_id,status_queue,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		if self.flexranCtrlInstalled and self.flexranCtrlStarted:
			self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
			self.command('cd /opt/flexran_rtc', '\$', 5)
			self.command('curl http://localhost:9999/stats | jq \'.\' > log/check_status_' + self.testCase_id + '.log 2>&1', '\$', 5)
			self.command('cat log/check_status_' + self.testCase_id + '.log | jq \'.eNB_config[0].UE\' | grep -c rnti | sed -e "s#^#Nb Connected UE = #"', '\$', 5)
			result = re.search('Nb Connected UE = (?P<nb_ues>[0-9]+)', str(self.ssh.before))
			passStatus = True
			if result is not None:
				nb_ues = int(result.group('nb_ues'))
				htmlOptions = 'Nb Connected UE(s) to eNB = ' + str(nb_ues)
				logging.debug('\u001B[1;37;44m ' + htmlOptions + ' \u001B[0m')
				if self.expectedNbOfConnectedUEs > -1:
					if nb_ues != self.expectedNbOfConnectedUEs:
						passStatus = False
			else:
				htmlOptions = 'N/A'
			self.close()
		else:
			passStatus = True
			htmlOptions = 'N/A'

		if (status_queue.empty()):
			self.CreateHtmlTestRow(htmlOptions, 'KO', ALL_PROCESSES_OK)
			self.AutoTerminateUEandeNB()
		else:
			check_status = True
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					check_status = False
				device_id = status_queue.get()
				message = status_queue.get()
				html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + '</pre>'
				html_queue.put(html_cell)
			if check_status and passStatus:
				self.CreateHtmlTestRowQueue(htmlOptions, 'OK', len(self.UEDevices), html_queue)
			else:
				self.CreateHtmlTestRowQueue(htmlOptions, 'KO', len(self.UEDevices), html_queue)
				self.AutoTerminateUEandeNB()

	def GetAllUEIPAddresses(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		ue_ip_status = 0
		self.UEIPAddresses = []
		if (len(self.UEDevices) == 1) and (self.UEDevices[0] == 'OAI-UE'):
			if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
				Usage()
				sys.exit('Insufficient Parameter')
			self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
			self.command('ifconfig oaitun_ue1', '\$', 4)
			result = re.search('inet addr:(?P<ueipaddress>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)', str(self.ssh.before))
			if result is not None:
				UE_IPAddress = result.group('ueipaddress')
				logging.debug('\u001B[1mUE (' + self.UEDevices[0] + ') IP Address is ' + UE_IPAddress + '\u001B[0m')
				self.UEIPAddresses.append(UE_IPAddress)
			else:
				logging.debug('\u001B[1;37;41m UE IP Address Not Found! \u001B[0m')
				ue_ip_status -= 1
			self.close()
			return ue_ip_status
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		idx = 0
		for device_id in self.UEDevices:
			if self.UEDevicesStatus[idx] != UE_STATUS_ATTACHED:
				idx += 1
				continue
			count = 0
			while count < 4:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell ip addr show | grep rmnet', '\$', 15)
				result = re.search('inet (?P<ueipaddress>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\/[0-9]+[0-9a-zA-Z\.\s]+', str(self.ssh.before))
				if result is None:
					logging.debug('\u001B[1;37;41m UE IP Address Not Found! \u001B[0m')
					time.sleep(1)
					count += 1
				else:
					count = 10
			if count < 9:
				ue_ip_status -= 1
				continue
			UE_IPAddress = result.group('ueipaddress')
			logging.debug('\u001B[1mUE (' + device_id + ') IP Address is ' + UE_IPAddress + '\u001B[0m')
			for ueipaddress in self.UEIPAddresses:
				if ueipaddress == UE_IPAddress:
					logging.debug('\u001B[1mUE (' + device_id + ') IP Address ' + UE_IPAddress + ': has already been allocated to another device !' + '\u001B[0m')
					ue_ip_status -= 1
					continue
			self.UEIPAddresses.append(UE_IPAddress)
			idx += 1
		self.close()
		return ue_ip_status

	def ping_iperf_wrong_exit(self, lock, UE_IPAddress, device_id, statusQueue, message):
		lock.acquire()
		statusQueue.put(-1)
		statusQueue.put(device_id)
		statusQueue.put(UE_IPAddress)
		statusQueue.put(message)
		lock.release()

	def Ping_common(self, lock, UE_IPAddress, device_id, statusQueue):
		try:
			self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
			self.command('cd scripts', '\$', 5)
			ping_time = re.findall("-c (\d+)",str(self.ping_args))
			ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' ' + UE_IPAddress + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '_' + device_id + '.log', '\$', int(ping_time[0])*1.5)
			# TIMEOUT CASE
			if ping_status < 0:
				message = 'Ping with UE (' + str(UE_IPAddress) + ') crashed due to TIMEOUT!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
				return
			result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
			if result is None:
				message = 'Packet Loss Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
				return
			packetloss = result.group('packetloss')
			if float(packetloss) == 100:
				message = 'Packet Loss is 100%'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
				return
			result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
			if result is None:
				message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.close()
				self.ping_iperf_wrong_exit(lock, UE_IPAddress, device_id, statusQueue, message)
				return
			rtt_min = result.group('rtt_min')
			rtt_avg = result.group('rtt_avg')
			rtt_max = result.group('rtt_max')
			pal_msg = 'Packet Loss : ' + packetloss + '%'
			min_msg = 'RTT(Min)    : ' + rtt_min + ' ms'
			avg_msg = 'RTT(Avg)    : ' + rtt_avg + ' ms'
			max_msg = 'RTT(Max)    : ' + rtt_max + ' ms'
			lock.acquire()
			logging.debug('\u001B[1;37;44m ping result (' + UE_IPAddress + ') \u001B[0m')
			logging.debug('\u001B[1;34m    ' + pal_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + min_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + avg_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + max_msg + '\u001B[0m')
			qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
			packetLossOK = True
			if packetloss is not None:
				if float(packetloss) > float(self.ping_packetloss_threshold):
					qMsg += '\nPacket Loss too high'
					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
					packetLossOK = False
				elif float(packetloss) > 0:
					qMsg += '\nPacket Loss is not 0%'
					logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
			if (packetLossOK):
				statusQueue.put(0)
			else:
				statusQueue.put(-1)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
			statusQueue.put(qMsg)
			lock.release()
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def PingNoS1_wrong_exit(self, qMsg):
		html_queue = SimpleQueue()
		html_cell = '<pre style="background-color:white">OAI UE ping result\n' + qMsg + '</pre>'
		html_queue.put(html_cell)
		self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)

	def PingNoS1(self):
		check_eNB = True
		check_OAI_UE = True
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
			self.AutoTerminateUEandeNB()
			return
		ping_from_eNB = re.search('oaitun_enb1', str(self.ping_args))
		if ping_from_eNB is not None:
			if self.eNBIPAddress == '' or self.eNBUserName == '' or self.eNBPassword == '':
				Usage()
				sys.exit('Insufficient Parameter')
		else:
			if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '':
				Usage()
				sys.exit('Insufficient Parameter')
		try:
			if ping_from_eNB is not None:
				self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
				self.command('cd ' + self.eNBSourceCodePath + '/cmake_targets/', '\$', 5)
			else:
				self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
				self.command('cd ' + self.UESourceCodePath + '/cmake_targets/', '\$', 5)
			self.command('cd cmake_targets', '\$', 5)
			ping_time = re.findall("-c (\d+)",str(self.ping_args))
			ping_status = self.command('stdbuf -o0 ping ' + self.ping_args + ' 2>&1 | stdbuf -o0 tee ping_' + self.testCase_id + '.log', '\$', int(ping_time[0])*1.5)
			# TIMEOUT CASE
			if ping_status < 0:
				message = 'Ping with OAI UE crashed due to TIMEOUT!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.PingNoS1_wrong_exit(message)
				return
			result = re.search(', (?P<packetloss>[0-9\.]+)% packet loss, time [0-9\.]+ms', str(self.ssh.before))
			if result is None:
				message = 'Packet Loss Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.PingNoS1_wrong_exit(message)
				return
			packetloss = result.group('packetloss')
			if float(packetloss) == 100:
				message = 'Packet Loss is 100%'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.PingNoS1_wrong_exit(message)
				return
			result = re.search('rtt min\/avg\/max\/mdev = (?P<rtt_min>[0-9\.]+)\/(?P<rtt_avg>[0-9\.]+)\/(?P<rtt_max>[0-9\.]+)\/[0-9\.]+ ms', str(self.ssh.before))
			if result is None:
				message = 'Ping RTT_Min RTT_Avg RTT_Max Not Found!'
				logging.debug('\u001B[1;37;41m ' + message + ' \u001B[0m')
				self.PingNoS1_wrong_exit(message)
				return
			rtt_min = result.group('rtt_min')
			rtt_avg = result.group('rtt_avg')
			rtt_max = result.group('rtt_max')
			pal_msg = 'Packet Loss : ' + packetloss + '%'
			min_msg = 'RTT(Min)    : ' + rtt_min + ' ms'
			avg_msg = 'RTT(Avg)    : ' + rtt_avg + ' ms'
			max_msg = 'RTT(Max)    : ' + rtt_max + ' ms'
			logging.debug('\u001B[1;37;44m OAI UE ping result \u001B[0m')
			logging.debug('\u001B[1;34m    ' + pal_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + min_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + avg_msg + '\u001B[0m')
			logging.debug('\u001B[1;34m    ' + max_msg + '\u001B[0m')
			qMsg = pal_msg + '\n' + min_msg + '\n' + avg_msg + '\n' + max_msg
			packetLossOK = True
			if packetloss is not None:
				if float(packetloss) > float(self.ping_packetloss_threshold):
					qMsg += '\nPacket Loss too high'
					logging.debug('\u001B[1;37;41m Packet Loss too high \u001B[0m')
					packetLossOK = False
				elif float(packetloss) > 0:
					qMsg += '\nPacket Loss is not 0%'
					logging.debug('\u001B[1;30;43m Packet Loss is not 0% \u001B[0m')
			self.close()
			html_queue = SimpleQueue()
			ip_addr = 'TBD'
			html_cell = '<pre style="background-color:white">OAI UE ping result\n' + qMsg + '</pre>'
			html_queue.put(html_cell)
			if packetLossOK:
				self.CreateHtmlTestRowQueue(self.ping_args, 'OK', len(self.UEDevices), html_queue)
			else:
				self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)

			# copying on the EPC server for logCollection
			if ping_from_eNB is not None:
				copyin_res = self.copyin(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, self.eNBSourceCodePath + '/cmake_targets/ping_' + self.testCase_id + '.log', '.')
			else:
				copyin_res = self.copyin(self.UEIPAddress, self.UEUserName, self.UEPassword, self.UESourceCodePath + '/cmake_targets/ping_' + self.testCase_id + '.log', '.')
			if (copyin_res == 0):
				self.copyout(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, 'ping_' + self.testCase_id + '.log', self.EPCSourceCodePath + '/scripts')
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def Ping(self):
		result = re.search('noS1', str(self.Initialize_eNB_args))
		if result is not None:
			self.PingNoS1()
			return
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		check_eNB = True
		if (len(self.UEDevices) == 1) and (self.UEDevices[0] == 'OAI-UE'):
			check_OAI_UE = True
		else:
			check_OAI_UE = False
		pStatus = self.CheckProcessExist(check_eNB, check_OAI_UE)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.ping_args, 'KO', pStatus)
			self.AutoTerminateUEandeNB()
			return
		ueIpStatus = self.GetAllUEIPAddresses()
		if (ueIpStatus < 0):
			self.CreateHtmlTestRow(self.ping_args, 'KO', UE_IP_ADDRESS_ISSUE)
			self.AutoTerminateUEandeNB()
			return
		multi_jobs = []
		i = 0
		lock = Lock()
		status_queue = SimpleQueue()
		for UE_IPAddress in self.UEIPAddresses:
			device_id = self.UEDevices[i]
			p = Process(target = self.Ping_common, args = (lock,UE_IPAddress,device_id,status_queue,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
			i = i + 1
		for job in multi_jobs:
			job.join()

		if (status_queue.empty()):
			self.CreateHtmlTestRow(self.ping_args, 'KO', ALL_PROCESSES_OK)
			self.AutoTerminateUEandeNB()
		else:
			ping_status = True
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					ping_status = False
				device_id = status_queue.get()
				ip_addr = status_queue.get()
				message = status_queue.get()
				html_cell = '<pre style="background-color:white">UE (' + device_id + ')\nIP Address  : ' + ip_addr + '\n' + message + '</pre>'
				html_queue.put(html_cell)
			if (ping_status):
				self.CreateHtmlTestRowQueue(self.ping_args, 'OK', len(self.UEDevices), html_queue)
			else:
				self.CreateHtmlTestRowQueue(self.ping_args, 'KO', len(self.UEDevices), html_queue)
				self.AutoTerminateUEandeNB()

	def Iperf_ComputeTime(self):
		result = re.search('-t (?P<iperf_time>\d+)', str(self.iperf_args))
		if result is None:
			logging.debug('\u001B[1;37;41m Iperf time Not Found! \u001B[0m')
			sys.exit(1)
		return result.group('iperf_time')

	def Iperf_ComputeModifiedBW(self, idx, ue_num):
		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(self.iperf_args))
		if result is None:
			logging.debug('\u001B[1;37;41m Iperf bandwidth Not Found! \u001B[0m')
			sys.exit(1)
		iperf_bandwidth = result.group('iperf_bandwidth')
		if self.iperf_profile == 'balanced':
			iperf_bandwidth_new = float(iperf_bandwidth)/ue_num
		if self.iperf_profile == 'single-ue':
			iperf_bandwidth_new = float(iperf_bandwidth)
		if self.iperf_profile == 'unbalanced':
			# residual is 2% of max bw
			residualBW = float(iperf_bandwidth) / 50
			if idx == 0:
				iperf_bandwidth_new = float(iperf_bandwidth) - ((ue_num - 1) * residualBW)
			else:
				iperf_bandwidth_new = residualBW
		iperf_bandwidth_str = '-b ' + iperf_bandwidth
		iperf_bandwidth_str_new = '-b ' + ('%.2f' % iperf_bandwidth_new)
		result = re.sub(iperf_bandwidth_str, iperf_bandwidth_str_new, str(self.iperf_args))
		if result is None:
			logging.debug('\u001B[1;37;41m Calculate Iperf bandwidth Failed! \u001B[0m')
			sys.exit(1)
		return result

	def Iperf_analyzeV2TCPOutput(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
		self.command('awk -f /tmp/tcp_iperf_stats.awk /tmp/CI-eNB/scripts/iperf_' + self.testCase_id + '_' + device_id + '.log', '\$', 5)
		result = re.search('Avg Bitrate : (?P<average>[0-9\.]+ Mbits\/sec) Max Bitrate : (?P<maximum>[0-9\.]+ Mbits\/sec) Min Bitrate : (?P<minimum>[0-9\.]+ Mbits\/sec)', str(self.ssh.before))
		if result is not None:
			avgbitrate = result.group('average')
			maxbitrate = result.group('maximum')
			minbitrate = result.group('minimum')
			lock.acquire()
			logging.debug('\u001B[1;37;44m TCP iperf result (' + UE_IPAddress + ') \u001B[0m')
			msg = 'TCP Stats   :\n'
			if avgbitrate is not None:
				logging.debug('\u001B[1;34m    Avg Bitrate : ' + avgbitrate + '\u001B[0m')
				msg += 'Avg Bitrate : ' + avgbitrate + '\n'
			if maxbitrate is not None:
				logging.debug('\u001B[1;34m    Max Bitrate : ' + maxbitrate + '\u001B[0m')
				msg += 'Max Bitrate : ' + maxbitrate + '\n'
			if minbitrate is not None:
				logging.debug('\u001B[1;34m    Min Bitrate : ' + minbitrate + '\u001B[0m')
				msg += 'Min Bitrate : ' + minbitrate + '\n'
			statusQueue.put(0)
			statusQueue.put(device_id)
			statusQueue.put(UE_IPAddress)
			statusQueue.put(msg)
			lock.release()
		return 0

	def Iperf_analyzeV2Output(self, lock, UE_IPAddress, device_id, statusQueue, iperf_real_options):
		result = re.search('-u', str(iperf_real_options))
		if result is None:
			return self.Iperf_analyzeV2TCPOutput(lock, UE_IPAddress, device_id, statusQueue, iperf_real_options)

		result = re.search('Server Report:', str(self.ssh.before))
		if result is None:
			result = re.search('read failed: Connection refused', str(self.ssh.before))
			if result is not None:
				logging.debug('\u001B[1;37;41m Could not connect to iperf server! \u001B[0m')
			else:
				logging.debug('\u001B[1;37;41m Server Report and Connection refused Not Found! \u001B[0m')
			return -1
		# Computing the requested bandwidth in float
		result = re.search('-b (?P<iperf_bandwidth>[0-9\.]+)[KMG]', str(iperf_real_options))
		if result is not None:
			req_bandwidth = result.group('iperf_bandwidth')
			req_bw = float(req_bandwidth)
			result = re.search('-b [0-9\.]+K', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Kbits/sec' % req_bw
				req_bw = req_bw * 1000
			result = re.search('-b [0-9\.]+M', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Mbits/sec' % req_bw
				req_bw = req_bw * 1000000
			result = re.search('-b [0-9\.]+G', str(iperf_real_options))
			if result is not None:
				req_bandwidth = '%.1f Gbits/sec' % req_bw
				req_bw = req_bw * 1000000000

		result = re.search('Server Report:\\\\r\\\\n(?:|\[ *\d+\].*) (?P<bitrate>[0-9\.]+ [KMG]bits\/sec) +(?P<jitter>[0-9\.]+ ms) +(\d+\/..\d+) (\((?P<packetloss>[0-9\.]+)%\))', str(self.ssh.before))
		if result is not None:
			bitrate = result.group('bitrate')
			packetloss = result.group('packetloss')
			jitter = result.group('jitter')
			lock.acquire()
			logging.debug('\u001B[1;37;44m iperf result (' + UE_IPAddress + ') \u001B[0m')
			iperfStatus = True
			msg = 'Req Bitrate : ' + req_bandwidth + '\n'
			logging.debug('\u001B[1;34m    Req Bitrate : ' + req_bandwidth + '\u001B[0m')
			if bitrate is not None:
				msg += 'Bitrate     : ' + bitrate + '\n'
				logging.debug('\u001B[1;34m    Bitrate     : ' + bitrate + '\u001B[0m')
				result = re.search('(?P<real_bw>[0-9\.]+) [KMG]bits/sec', str(bitrate))
				if result is not None:
					actual_bw = float(str(result.group('real_bw')))
					result = re.search('[0-9\.]+ K', bitrate)
					if result is not None:
						actual_bw = actual_bw * 1000
					result = re.search('[0-9\.]+ M', bitrate)
					if result is not None:
						actual_bw = actual_bw * 1000000
					result = re.search('[0-9\.]+ G', bitrate)
					if result is not None:
						actual_bw = actual_bw * 1000000000
					br_loss = 100 * actual_bw / req_bw