main.py

# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements.  See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# *      http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# *      contact@openairinterface.org
# */
#---------------------------------------------------------------------
# Python for CI of OAI-eNB + COTS-UE
#
#   Required Python Version
#     Python 3.x
#
#   Required Python Package
#     pexpect
#---------------------------------------------------------------------

#-----------------------------------------------------------
# Version
#-----------------------------------------------------------
Version = '0.1'

#-----------------------------------------------------------
# Constants
#-----------------------------------------------------------
ALL_PROCESSES_OK = 0
ENB_PROCESS_FAILED = -1
ENB_PROCESS_OK = +1
ENB_PROCESS_SEG_FAULT = -11
ENB_PROCESS_ASSERTION = -12
ENB_PROCESS_REALTIME_ISSUE = -13
ENB_PROCESS_NOLOGFILE_TO_ANALYZE = -14
HSS_PROCESS_FAILED = -2
HSS_PROCESS_OK = +2
MME_PROCESS_FAILED = -3
MME_PROCESS_OK = +3
SPGW_PROCESS_FAILED = -4
SPGW_PROCESS_OK = +4
UE_IP_ADDRESS_ISSUE = -5

#-----------------------------------------------------------
# Import
#-----------------------------------------------------------
import sys		# arg
import re		# reg
import pexpect		# pexpect
import time		# sleep
import os
import subprocess
import xml.etree.ElementTree as ET
import logging
import datetime
import signal
from multiprocessing import Process, Lock, SimpleQueue
logging.basicConfig(
	level=logging.DEBUG,
	format="[%(asctime)s] %(name)s:%(levelname)s: %(message)s"
)

#-----------------------------------------------------------
# Class Declaration
#-----------------------------------------------------------
class SSHConnection():
	def __init__(self):
		self.eNBIPAddress = ''
		self.eNBRepository = ''
		self.eNBBranch = ''
		self.eNB_AllowMerge = False
		self.eNBCommitID = ''
		self.eNBTargetBranch = ''
		self.eNBUserName = ''
		self.eNBPassword = ''
		self.eNBSourceCodePath = ''
		self.EPCIPAddress = ''
		self.EPCUserName = ''
		self.EPCPassword = ''
		self.EPCSourceCodePath = ''
		self.EPCType = ''
		self.ADBIPAddress = ''
		self.ADBUserName = ''
		self.ADBPassword = ''
		self.testCase_id = ''
		self.testXMLfiles = []
		self.nbTestXMLfiles = 0
		self.desc = ''
		self.Build_eNB_args = ''
		self.Initialize_eNB_args = ''
		self.eNBLogFile = ''
		self.eNB_instance = ''
		self.ping_args = ''
		self.ping_packetloss_threshold = ''
		self.iperf_args = ''
		self.iperf_packetloss_threshold = ''
		self.iperf_profile = ''
		self.nbMaxUEtoAttach = -1
		self.UEDevices = []
		self.CatMDevices = []
		self.UEIPAddresses = []
		self.htmlFile = ''
		self.htmlHeaderCreated = False
		self.htmlFooterCreated = False
		self.htmlUEConnected = -1
		self.htmleNBFailureMsg = ''
		self.picocom_closure = False
		self.idle_sleep_time = 0
		self.htmlTabRefs = []
		self.htmlTabNames = []
		self.htmlTabIcons = []
		self.finalStatus = False
		self.eNBOsVersion = ''
		self.eNBKernelVersion = ''
		self.eNBUhdVersion = ''
		self.eNBCpuNb = ''
		self.eNBCpuModel = ''
		self.eNBCpuMHz = ''
		#self.UEOsVersion = ''
		#self.UEKernelVersion = ''
		#self.UEUhdVersion = ''
		#self.UECpuNb = ''
		#self.UECpuModel = ''
		self.UEIPAddress = ''
		self.UEBranch = ''
		#self.UE_AllowMerge = False
		self.UECommitID = ''
		#self.UETargetBranch = ''
		self.UEUserName = ''
		self.UEPassword = ''
		self.UE_instance = ''
		#self.UESourceCodePath = ''
		#self.UECpuMHz = ''
		self.Build_OAI_UE_args = ''
		self.Initialize_OAI_UE_args = ''


	def open(self, ipaddress, username, password):
		count = 0
		connect_status = False
		while count < 4:
			self.ssh = pexpect.spawn('ssh', [username + '@' + ipaddress], timeout = 5)
			self.sshresponse = self.ssh.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', 'Last login', pexpect.EOF, pexpect.TIMEOUT])
			if self.sshresponse == 0:
				self.ssh.sendline('yes')
				self.ssh.expect('password:')
				self.ssh.sendline(password)
				self.sshresponse = self.ssh.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if self.sshresponse == 0:
					count = 10
					connect_status = True
				else:
					logging.debug('self.sshresponse = ' + str(self.sshresponse))
			elif self.sshresponse == 1:
				self.ssh.sendline(password)
				self.sshresponse = self.ssh.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if self.sshresponse == 0:
					count = 10
					connect_status = True
				else:
					logging.debug('self.sshresponse = ' + str(self.sshresponse))
			elif self.sshresponse == 2:
				# Checking if we are really on the remote client defined by its IP address
				self.command('stdbuf -o0 ifconfig | egrep --color=never "inet addr:"', '\$', 5)
				result = re.search(str(ipaddress), str(self.ssh.before))
				if result is None:
					self.close()
				else:
					count = 10
					connect_status = True
			else:
				# debug output
				logging.debug(str(self.ssh.before))
				logging.debug('self.sshresponse = ' + str(self.sshresponse))
			# adding a tempo when failure
			if not connect_status:
				time.sleep(1)
			count += 1
		if connect_status:
			pass
		else:
			sys.exit('SSH Connection Failed')

	def command(self, commandline, expectedline, timeout):
		logging.debug(commandline)
		self.ssh.timeout = timeout
		self.ssh.sendline(commandline)
		self.sshresponse = self.ssh.expect([expectedline, pexpect.EOF, pexpect.TIMEOUT])
		if self.sshresponse == 0:
			return 0
		elif self.sshresponse == 1:
			logging.debug('\u001B[1;37;41m Unexpected EOF \u001B[0m')
			logging.debug('Expected Line : ' + expectedline)
			sys.exit(self.sshresponse)
		elif self.sshresponse == 2:
			logging.debug('\u001B[1;37;41m Unexpected TIMEOUT \u001B[0m')
			logging.debug('Expected Line : ' + expectedline)
			result = re.search('ping |iperf |picocom', str(commandline))
			if result is None:
				logging.debug(str(self.ssh.before))
				sys.exit(self.sshresponse)
			else:
				return -1
		else:
			logging.debug('\u001B[1;37;41m Unexpected Others \u001B[0m')
			logging.debug('Expected Line : ' + expectedline)
			sys.exit(self.sshresponse)

	def close(self):
		self.ssh.timeout = 5
		self.ssh.sendline('exit')
		self.sshresponse = self.ssh.expect([pexpect.EOF, pexpect.TIMEOUT])
		if self.sshresponse == 0:
			pass
		elif self.sshresponse == 1:
			if not self.picocom_closure:
				logging.debug('\u001B[1;37;41m Unexpected TIMEOUT during closing\u001B[0m')
		else:
			logging.debug('\u001B[1;37;41m Unexpected Others during closing\u001B[0m')

	def copyin(self, ipaddress, username, password, source, destination):
		count = 0
		copy_status = False
		logging.debug('scp '+ username + '@' + ipaddress + ':' + source + ' ' + destination)
		while count < 10:
			scp_spawn = pexpect.spawn('scp '+ username + '@' + ipaddress + ':' + source + ' ' + destination, timeout = 100)
			scp_response = scp_spawn.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', pexpect.EOF, pexpect.TIMEOUT])
			if scp_response == 0:
				scp_spawn.sendline('yes')
				scp_spawn.expect('password:')
				scp_spawn.sendline(password)
				scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if scp_response == 0:
					count = 10
					copy_status = True
				else:
					logging.debug('1 - scp_response = ' + str(scp_response))
			elif scp_response == 1:
				scp_spawn.sendline(password)
				scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if scp_response == 0 or scp_response == 3:
					count = 10
					copy_status = True
				else:
					logging.debug('2 - scp_response = ' + str(scp_response))
			elif scp_response == 2:
				count = 10
				copy_status = True
			else:
				logging.debug('3 - scp_response = ' + str(scp_response))
			# adding a tempo when failure
			if not copy_status:
				time.sleep(1)
			count += 1
		if copy_status:
			return 0
		else:
			return -1

	def copyout(self, ipaddress, username, password, source, destination):
		count = 0
		copy_status = False
		logging.debug('scp ' + source + ' ' + username + '@' + ipaddress + ':' + destination)
		while count < 4:
			scp_spawn = pexpect.spawn('scp ' + source + ' ' + username + '@' + ipaddress + ':' + destination, timeout = 100)
			scp_response = scp_spawn.expect(['Are you sure you want to continue connecting (yes/no)?', 'password:', pexpect.EOF, pexpect.TIMEOUT])
			if scp_response == 0:
				scp_spawn.sendline('yes')
				scp_spawn.expect('password:')
				scp_spawn.sendline(password)
				scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if scp_response == 0:
					count = 10
					copy_status = True
				else:
					logging.debug('1 - scp_response = ' + str(scp_response))
			elif scp_response == 1:
				scp_spawn.sendline(password)
				scp_response = scp_spawn.expect(['\$', 'Permission denied', 'password:', pexpect.EOF, pexpect.TIMEOUT])
				if scp_response == 0 or scp_response == 3:
					count = 10
					copy_status = True
				else:
					logging.debug('2 - scp_response = ' + str(scp_response))
			elif scp_response == 2:
				count = 10
				copy_status = True
			else:
				logging.debug('3 - scp_response = ' + str(scp_response))
			# adding a tempo when failure
			if not copy_status:
				time.sleep(1)
			count += 1
		if copy_status:
			pass
		else:
			sys.exit('SCP failed')

	def BuildeNB(self):
		if self.eNBIPAddress == '' or self.eNBRepository == '' or self.eNBBranch == '' or self.eNBUserName == '' or self.eNBPassword == '' or self.eNBSourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
		self.command('mkdir -p ' + self.eNBSourceCodePath, '\$', 5)
		self.command('cd ' + self.eNBSourceCodePath, '\$', 5)
		self.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + self.eNBRepository + ' .; else stdbuf -o0 git fetch; fi', '\$', 600)
		# Raphael: here add a check if git clone or git fetch went smoothly
		self.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
		self.command('git config user.name "OAI Jenkins"', '\$', 5)
		self.command('echo ' + self.eNBPassword + ' | sudo -S git clean -x -d -ff', '\$', 30)
		# if the commit ID is provided use it to point to it
		if self.eNBCommitID != '':
			self.command('git checkout -f ' + self.eNBCommitID, '\$', 5)
		# if the branch is not develop, then it is a merge request and we need to do 
		# the potential merge. Note that merge conflicts should already been checked earlier
		if (self.eNB_AllowMerge):
			if self.eNBTargetBranch == '':
				if (self.eNBBranch != 'develop') and (self.eNBBranch != 'origin/develop'):
					self.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
			else:
				logging.debug('Merging with the target branch: ' + self.eNBTargetBranch)
				self.command('git merge --ff origin/' + self.eNBTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
		self.command('source oaienv', '\$', 5)
		self.command('cd cmake_targets', '\$', 5)
		self.command('mkdir -p log', '\$', 5)
		self.command('chmod 777 log', '\$', 5)
		# no need to remove in log (git clean did the trick)
		self.command('stdbuf -o0 ./build_oai ' + self.Build_eNB_args + ' 2>&1 | stdbuf -o0 tee -a compile_oai_enb.log', 'Bypassing the Tests', 600)
		self.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
		self.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
		self.command('mv compile_oai_enb.log ' + 'build_log_' + self.testCase_id, '\$', 5)
		# Workaround to run with develop-nr
		self.command('if [ -e ran_build ]; then cp -rf ran_build lte_build_oai; fi', '\$', 30)
		self.close()
		self.CreateHtmlTestRow(self.Build_eNB_args, 'OK', ALL_PROCESSES_OK)

	def BuildOAIUE(self):
		if self.UEIPAddress == '' or self.eNBRepository == '' or self.eNBBranch == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
		self.command('mkdir -p ' + self.UESourceCodePath, '\$', 5)
		self.command('cd ' + self.UESourceCodePath, '\$', 5)
		self.command('if [ ! -e .git ]; then stdbuf -o0 git clone ' + self.eNBRepository + ' .; else stdbuf -o0 git fetch; fi', '\$', 600)
		# here add a check if git clone or git fetch went smoothly
		self.command('git config user.email "jenkins@openairinterface.org"', '\$', 5)
		self.command('git config user.name "OAI Jenkins"', '\$', 5)
		self.command('echo ' + self.UEPassword + ' | sudo -S git clean -x -d -ff', '\$', 30)
		# if the commit ID is provided use it to point to it
		if self.eNBCommitID != '':
			self.command('git checkout -f ' + self.eNBCommitID, '\$', 5)
		# if the branch is not develop, then it is a merge request and we need to do 
		# the potential merge. Note that merge conflicts should already been checked earlier
		if (self.eNB_AllowMerge):
			if self.eNBTargetBranch == '':
				if (self.eNBBranch != 'develop') and (self.eNBBranch != 'origin/develop'):
					self.command('git merge --ff origin/develop -m "Temporary merge for CI"', '\$', 5)
			else:
				logging.debug('Merging with the target branch: ' + self.eNBTargetBranch)
				self.command('git merge --ff origin/' + self.eNBTargetBranch + ' -m "Temporary merge for CI"', '\$', 5)
		self.command('source oaienv', '\$', 5)
		self.command('cd cmake_targets', '\$', 5)
		self.command('mkdir -p log', '\$', 5)
		self.command('chmod 777 log', '\$', 5)
		# no need to remove in log (git clean did the trick)
		self.command('stdbuf -o0 ./build_oai ' + self.Build_OAI_UE_args + ' 2>&1 | stdbuf -o0 tee -a compile_oai_ue.log', 'Bypassing the Tests', 600)
		self.command('mkdir -p build_log_' + self.testCase_id, '\$', 5)
		self.command('mv log/* ' + 'build_log_' + self.testCase_id, '\$', 5)
		self.command('mv compile_oai_ue.log ' + 'build_log_' + self.testCase_id, '\$', 5)
		self.close()
		self.CreateHtmlTestRow(self.Build_OAI_UE_args, 'OK', ALL_PROCESSES_OK)


	def InitializeHSS(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		if re.match('OAI', self.EPCType, re.IGNORECASE):
			logging.debug('Using the OAI EPC HSS')
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
			self.command('source oaienv', '\$', 5)
			self.command('cd scripts', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_hss 2>&1 | stdbuf -o0 awk \'{ print strftime("[%Y/%m/%d %H:%M:%S] ",systime()) $0 }\' | stdbuf -o0 tee -a hss_' + self.testCase_id + '.log &', 'Core state: 2 -> 3', 35)
		else:
			logging.debug('Using the ltebox simulated HSS')
			self.command('if [ -d ' + self.EPCSourceCodePath + '/scripts ]; then echo ' + self.eNBPassword + ' | sudo -S rm -Rf ' + self.EPCSourceCodePath + '/scripts ; fi', '\$', 5)
			self.command('mkdir -p ' + self.EPCSourceCodePath + '/scripts', '\$', 5)
			self.command('cd /opt/hss_sim0609', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f hss.log daemon.log', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S echo "Starting sudo session" && sudo daemon --unsafe --name=simulated_hss --chdir=/opt/hss_sim0609 ./starthss_real  ', '\$', 5)
		self.close()
		self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)

	def InitializeMME(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		if re.match('OAI', self.EPCType, re.IGNORECASE):
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
			self.command('source oaienv', '\$', 5)
			self.command('cd scripts', '\$', 5)
			self.command('stdbuf -o0 hostname', '\$', 5)
			result = re.search('hostname\\\\r\\\\n(?P<host_name>[a-zA-Z0-9\-\_]+)\\\\r\\\\n', str(self.ssh.before))
			if result is None:
				logging.debug('\u001B[1;37;41m Hostname Not Found! \u001B[0m')
				sys.exit(1)
			host_name = result.group('host_name')
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_mme 2>&1 | stdbuf -o0 tee -a mme_' + self.testCase_id + '.log &', 'MME app initialization complete', 100)
		else:
			self.command('cd /opt/ltebox/tools', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./start_mme', '\$', 5)
		self.close()
		self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)

	def InitializeSPGW(self):
		if self.EPCIPAddress == '' or self.EPCUserName == '' or self.EPCPassword == '' or self.EPCSourceCodePath == '' or self.EPCType == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
		if re.match('OAI', self.EPCType, re.IGNORECASE):
			self.command('cd ' + self.EPCSourceCodePath, '\$', 5)
			self.command('source oaienv', '\$', 5)
			self.command('cd scripts', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./run_spgw 2>&1 | stdbuf -o0 tee -a spgw_' + self.testCase_id + '.log &', 'Initializing SPGW-APP task interface: DONE', 30)
		else:
			self.command('cd /opt/ltebox/tools', '\$', 5)
			self.command('echo ' + self.EPCPassword + ' | sudo -S ./start_xGw', '\$', 5)
		self.close()
		self.CreateHtmlTestRow(self.EPCType, 'OK', ALL_PROCESSES_OK)

	def InitializeeNB(self):
		if self.eNBIPAddress == '' or self.eNBUserName == '' or self.eNBPassword == '' or self.eNBSourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = True
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow(self.Initialize_eNB_args, 'KO', pStatus)
			self.CreateHtmlTabFooter(False)
			sys.exit(1)
		# If tracer options is on, running tshark on EPC side and capture traffic b/ EPC and eNB
		result = re.search('T_stdout', str(self.Initialize_eNB_args))
		if result is not None:
			self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
			self.command('ip addr show | awk -f /tmp/active_net_interfaces.awk | egrep -v "lo|tun"', '\$', 5)
			result = re.search('interfaceToUse=(?P<eth_interface>[a-zA-Z0-9\-\_]+)done', str(self.ssh.before))
			if result is not None:
				eth_interface = result.group('eth_interface')
				logging.debug('\u001B[1m Launching tshark on interface ' + eth_interface + '\u001B[0m')
				self.command('echo ' + self.EPCPassword + ' | sudo -S rm -f /tmp/enb_' + self.testCase_id + '_s1log.pcap', '\$', 5)
				self.command('echo $USER; nohup sudo tshark -f "host ' + self.eNBIPAddress +'" -i ' + eth_interface + ' -w /tmp/enb_' + self.testCase_id + '_s1log.pcap > /tmp/tshark.log 2>&1 &', self.EPCUserName, 5)
			self.close()
		self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
		self.command('cd ' + self.eNBSourceCodePath, '\$', 5)
		# Initialize_eNB_args usually start with -O and followed by the location in repository
		full_config_file = self.Initialize_eNB_args.replace('-O ','')
		extIdx = full_config_file.find('.conf')
		if (extIdx > 0):
			extra_options = full_config_file[extIdx + 5:]
			# if tracer options is on, compiling and running T Tracer
			result = re.search('T_stdout', str(extra_options))
			if result is not None:
				logging.debug('\u001B[1m Compiling and launching T Tracer\u001B[0m')
				self.command('cd common/utils/T/tracer', '\$', 5)
				self.command('make', '\$', 10)
				self.command('echo $USER; nohup ./record -d ../T_messages.txt -o ' + self.eNBSourceCodePath + '/cmake_targets/enb_' + self.testCase_id + '_record.raw -ON -off VCD -off HEAVY -off LEGACY_GROUP_TRACE -off LEGACY_GROUP_DEBUG > ' + self.eNBSourceCodePath + '/cmake_targets/enb_' + self.testCase_id + '_record.log 2>&1 &', self.eNBUserName, 5)
				self.command('cd ' + self.eNBSourceCodePath, '\$', 5)
			full_config_file = full_config_file[:extIdx + 5]
			config_path, config_file = os.path.split(full_config_file)
		else:
			sys.exit('Insufficient Parameter')
		ci_full_config_file = config_path + '/ci-' + config_file
		rruCheck = False
		result = re.search('rru', str(config_file))
		if result is not None:
			rruCheck = True
		# Make a copy and adapt to EPC / eNB IP addresses
		self.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
		self.command('sed -i -e \'s/CI_MME_IP_ADDR/' + self.EPCIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
		self.command('sed -i -e \'s/CI_ENB_IP_ADDR/' + self.eNBIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
		# Launch eNB with the modified config file
		self.command('source oaienv', '\$', 5)
		self.command('cd cmake_targets', '\$', 5)
		self.command('echo "ulimit -c unlimited && ./lte_build_oai/build/lte-softmodem -O ' + self.eNBSourceCodePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
		self.command('chmod 775 ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
		self.command('echo ' + self.eNBPassword + ' | sudo -S rm -Rf enb_' + self.testCase_id + '.log', '\$', 5)
		self.command('echo ' + self.eNBPassword + ' | sudo -S -E daemon --inherit --unsafe --name=enb' + str(self.eNB_instance) + '_daemon --chdir=' + self.eNBSourceCodePath + '/cmake_targets -o ' + self.eNBSourceCodePath + '/cmake_targets/enb_' + self.testCase_id + '.log ./my-lte-softmodem-run' + str(self.eNB_instance) + '.sh', '\$', 5)
		if not rruCheck:
			self.eNBLogFile = 'enb_' + self.testCase_id + '.log'
		time.sleep(6)
		doLoop = True
		loopCounter = 10
		while (doLoop):
			loopCounter = loopCounter - 1
			if (loopCounter == 0):
				# In case of T tracer recording, we may need to kill it
				result = re.search('T_stdout', str(self.Initialize_eNB_args))
				if result is not None:
					self.command('killall --signal SIGKILL record', '\$', 5)
				self.close()
				doLoop = False
				logging.error('\u001B[1;37;41m eNB logging system did not show got sync! \u001B[0m')
				self.CreateHtmlTestRow('-O ' + config_file + extra_options, 'KO', ALL_PROCESSES_OK)
				self.CreateHtmlTabFooter(False)
				# In case of T tracer recording, we need to kill tshark on EPC side
				result = re.search('T_stdout', str(self.Initialize_eNB_args))
				if result is not None:
					self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
					logging.debug('\u001B[1m Stopping tshark \u001B[0m')
					self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
					self.close()
					time.sleep(1)
					pcap_log_file = 'enb_' + self.testCase_id + '_s1log.pcap'
					copyin_res = self.copyin(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, '/tmp/' + pcap_log_file, '.')
					if (copyin_res == 0):
						self.copyout(self.eNBIPAddress, self.eNBUserName, self.eNBPassword, pcap_log_file, self.eNBSourceCodePath + '/cmake_targets/.')
				sys.exit(1)
			else:
				self.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync"', '\$', 4)
				if rruCheck:
					result = re.search('wait RUs', str(self.ssh.before))
				else:
					result = re.search('got sync', str(self.ssh.before))
				if result is None:
					time.sleep(6)
				else:
					doLoop = False
					self.CreateHtmlTestRow('-O ' + config_file + extra_options, 'OK', ALL_PROCESSES_OK)
					logging.debug('\u001B[1m Initialize eNB Completed\u001B[0m')

		self.close()

	def InitializeUE_common(self, device_id):
		logging.debug('send adb commands')
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			# The following commands are deprecated since we no longer work on Android 7+
			# self.command('stdbuf -o0 adb -s ' + device_id + ' shell settings put global airplane_mode_on 1', '\$', 10)
			# self.command('stdbuf -o0 adb -s ' + device_id + ' shell am broadcast -a android.intent.action.AIRPLANE_MODE --ez state true', '\$', 60)
			# a dedicated script has to be installed inside the UE
			# airplane mode on means call /data/local/tmp/off
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
			#airplane mode off means call /data/local/tmp/on
			logging.debug('\u001B[1mUE (' + device_id + ') Initialize Completed\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def InitializeUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = self.InitializeUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)

	def InitializeOAIUE(self):
		if self.UEIPAddress == '' or self.UEUserName == '' or self.UEPassword == '' or self.UESourceCodePath == '':
			Usage()
			sys.exit('Insufficient Parameter')
		#initialize_OAI_UE_flag = True
		#pStatus = self.CheckOAIUEProcessExist(initialize_OAI_UE_flag)
		#if (pStatus < 0):
		#	self.CreateHtmlTestRow(self.Initialize_OAI_UE_args, 'KO', pStatus)
		#	self.CreateHtmlTabFooter(False)
		#	sys.exit(1)
		self.open(self.UEIPAddress, self.UEUserName, self.UEPassword)
		self.command('cd ' + self.UESourceCodePath, '\$', 5)
		# Initialize_OAI_UE_args usually start with -C and followed by the location in repository
		#full_config_file = self.Initialize_OAI_UE_args.replace('-O ','')
		#extIdx = full_config_file.find('.conf')
		#if (extIdx > 0):
		#	extra_options = full_config_file[extIdx + 5:]
		#	# if tracer options is on, compiling and running T Tracer
		#	result = re.search('T_stdout', str(extra_options))
		##	if result is not None:
		#		logging.debug('\u001B[1m Compiling and launching T Tracer\u001B[0m')
		#		self.command('cd common/utils/T/tracer', '\$', 5)
		#		self.command('make', '\$', 10)
		#		self.command('echo $USER; nohup ./record -d ../T_messages.txt -o ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '_record.raw -ON -off VCD -off HEAVY -off LEGACY_GROUP_TRACE -off LEGACY_GROUP_DEBUG > ' + self.UESourceCodePath + '/cmake_targets/enb_' + self.testCase_id + '_record.log 2>&1 &', self.UEUserName, 5)
		#		self.command('cd ' + self.UESourceCodePath, '\$', 5)
		#	full_config_file = full_config_file[:extIdx + 5]
		#	config_path, config_file = os.path.split(full_config_file)
		#ci_full_config_file = config_path + '/ci-' + config_file
		#rruCheck = False
		#result = re.search('rru', str(config_file))
		#if result is not None:
		#	rruCheck = True
		## Make a copy and adapt to EPC / UE IP addresses
		#self.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
		#self.command('sed -i -e \'s/CI_UE_IP_ADDR/' + self.UEIPAddress + '/\' ' + ci_full_config_file, '\$', 2);
		# Launch UE with the modified config file
		self.command('source oaienv', '\$', 5)
		self.command('cd cmake_targets/lte_build_oai/build', '\$', 5)
		self.command('echo "ulimit -c unlimited && ./lte-uesoftmodem ' + self.Initialize_OAI_UE_args + '" > ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
		self.command('chmod 775 ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
		self.command('echo ' + self.UEPassword + ' | sudo -S rm -Rf ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log', '\$', 5)
		self.command('echo ' + self.UEPassword + ' | sudo -S -E daemon --inherit --unsafe --name=ue' + str(self.UE_instance) + '_daemon --chdir=' + self.UESourceCodePath + '/cmake_targets/lte_build_oai/build -o ' + self.UESourceCodePath + '/cmake_targets/ue_' + self.testCase_id + '.log ./my-lte-uesoftmodem-run' + str(self.UE_instance) + '.sh', '\$', 5)
		self.UELogFile = 'ue_' + self.testCase_id + '.log'
		time.sleep(6)
		self.command('cd ../..', '\$', 5)
		doLoop = True
		loopCounter = 10
		while (doLoop):
			loopCounter = loopCounter - 1
			if (loopCounter == 0):
				# In case of T tracer recording, we may need to kill it
				#result = re.search('T_stdout', str(self.Initialize_OAI_UE_args))
				#if result is not None:
				#	self.command('killall --signal SIGKILL record', '\$', 5)
				self.close()
				doLoop = False
				logging.error('\u001B[1;37;41m UE logging system did not show got sync! \u001B[0m')
				self.CreateHtmlTestRow(self.Initialize_OAI_UE_args, 'KO', ALL_PROCESSES_OK)
				self.CreateHtmlTabFooter(False)
				## In case of T tracer recording, we need to kill tshark on EPC side
				#result = re.search('T_stdout', str(self.Initialize_OAI_UE_args))
				#if result is not None:
				#	self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
				#	logging.debug('\u001B[1m Stopping tshark \u001B[0m')
				#	self.command('echo ' + self.EPCPassword + ' | sudo -S killall --signal SIGKILL tshark', '\$', 5)
				#	self.close()
				#	time.sleep(1)
				#	pcap_log_file = 'enb_' + self.testCase_id + '_s1log.pcap'
				#	copyin_res = self.copyin(self.EPCIPAddress, self.EPCUserName, self.EPCPassword, '/tmp/' + pcap_log_file, '.')
				#	if (copyin_res == 0):
				#		self.copyout(self.UEIPAddress, self.UEUserName, self.UEPassword, pcap_log_file, self.UESourceCodePath + '/cmake_targets/.')
				sys.exit(1)
			else:
				self.command('stdbuf -o0 cat ue_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync"', '\$', 4)
				result = re.search('got sync', str(self.ssh.before))
				if result is None:
					time.sleep(6)
				else:
					doLoop = False
					self.CreateHtmlTestRow(self.Initialize_OAI_UE_args, 'OK', ALL_PROCESSES_OK)
					logging.debug('\u001B[1m Initialize OAI UE Completed\u001B[0m')
		self.close()

	def checkDevTTYisUnlocked(self):
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		count = 0
		while count < 5:
			self.command('echo ' + self.ADBPassword + ' | sudo -S lsof | grep ttyUSB0', '\$', 10)
			result = re.search('picocom', str(self.ssh.before))
			if result is None:
				count = 10
			else:
				time.sleep(5)
				count = count + 1
		self.close()

	def InitializeCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Disabling the Radio
		self.command('AT+CFUN=0', 'OK', 5)
		logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
		# Checking if auto-attach is enabled
		self.command('AT^AUTOATT?', 'OK', 5)
		result = re.search('AUTOATT: (?P<state>[0-9\-]+)', str(self.ssh.before))
		if result is not None:
			if result.group('state') is not None:
				autoAttachState = int(result.group('state'))
				if autoAttachState is not None:
					if autoAttachState == 0:
						self.command('AT^AUTOATT=1', 'OK', 5)
					logging.debug('\u001B[1m Auto-Attach enabled\u001B[0m')
		else:
			logging.debug('\u001B[1;37;41m Could not check Auto-Attach! \u001B[0m')
		# Force closure of picocom but device might still be locked
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def TerminateCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Disabling the Radio
		self.command('AT+CFUN=0', 'OK', 5)
		logging.debug('\u001B[1m Cellular Functionality disabled\u001B[0m')
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def AttachCatM(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.picocom_closure = True
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		# dummy call to start a sudo session. The picocom command does NOT handle well the `sudo -S`
		self.command('echo ' + self.ADBPassword + ' | sudo -S ls', '\$', 10)
		self.command('sudo picocom --baud 921600 --flow n --databits 8 /dev/ttyUSB0', 'Terminal ready', 10)
		time.sleep(1)
		# Calling twice AT to clear all buffers
		self.command('AT', 'OK|ERROR', 5)
		self.command('AT', 'OK', 5)
		# Enabling the Radio
		self.command('AT+CFUN=1', 'SIMSTORE,READY', 5)
		logging.debug('\u001B[1m Cellular Functionality enabled\u001B[0m')
		time.sleep(4)
		# We should check if we register
		count = 0
		while count < 3:
			self.command('AT+CEREG?', 'OK', 5)
			result = re.search('CEREG: 2,(?P<state>[0-9\-]+)', str(self.ssh.before))
			if result is not None:
				mDataConnectionState = int(result.group('state'))
				if mDataConnectionState is not None:
					logging.debug('+CEREG: 2,' + str(mDataConnectionState))
			else:
				logging.debug(str(self.ssh.before))
			count = count + 1
			time.sleep(1)
		self.close()
		self.picocom_closure = False
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		self.checkDevTTYisUnlocked()

	def AttachUE_common(self, device_id, statusQueue, lock):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
			time.sleep(2)
			max_count = 45
			count = max_count
			while count > 0:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
				if result is None:
					logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
					lock.acquire()
					statusQueue.put(-1)
					statusQueue.put(device_id)
					statusQueue.put('mDataConnectionState Not Found!')
					lock.release()
					break
				mDataConnectionState = int(result.group('state'))
				if mDataConnectionState == 2:
					logging.debug('\u001B[1mUE (' + device_id + ') Attach Completed\u001B[0m')
					lock.acquire()
					statusQueue.put(max_count - count)
					statusQueue.put(device_id)
					statusQueue.put('Attach Completed')
					lock.release()
					break
				count = count - 1
				if count == 15 or count == 30:
					logging.debug('\u001B[1;30;43m Retry UE (' + device_id + ') Flight Mode Off \u001B[0m')
					self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
					time.sleep(0.5)
					self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/on', '\$', 60)
					time.sleep(0.5)
				logging.debug('\u001B[1mWait UE (' + device_id + ') a second until mDataConnectionState=2 (' + str(max_count-count) + ' times)\u001B[0m')
				time.sleep(1)
			if count == 0:
				logging.debug('\u001B[1;37;41m UE (' + device_id + ') Attach Failed \u001B[0m')
				lock.acquire()
				statusQueue.put(-1)
				statusQueue.put(device_id)
				statusQueue.put('Attach Failed')
				lock.release()
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def AttachUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.AutoTerminateUEandeNB()
			self.CreateHtmlTabFooter(False)
			sys.exit(1)
		multi_jobs = []
		status_queue = SimpleQueue()
		lock = Lock()
		nb_ue_to_connect = 0
		for device_id in self.UEDevices:
			if (self.nbMaxUEtoAttach == -1) or (nb_ue_to_connect < self.nbMaxUEtoAttach):
				p = Process(target = self.AttachUE_common, args = (device_id, status_queue, lock,))
				p.daemon = True
				p.start()
				multi_jobs.append(p)
			nb_ue_to_connect = nb_ue_to_connect + 1
		for job in multi_jobs:
			job.join()

		if (status_queue.empty()):
			self.CreateHtmlTestRow('N/A', 'KO', ALL_PROCESSES_OK)
			self.CreateHtmlTabFooter(False)
			self.AutoTerminateUEandeNB()
			sys.exit(1)
		else:
			attach_status = True
			html_queue = SimpleQueue()
			while (not status_queue.empty()):
				count = status_queue.get()
				if (count < 0):
					attach_status = False
				device_id = status_queue.get()
				message = status_queue.get()
				if (count < 0):
					html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + '</pre>'
				else:
					html_cell = '<pre style="background-color:white">UE (' + device_id + ')\n' + message + ' in ' + str(count + 2) + ' seconds</pre>'
				html_queue.put(html_cell)
			if (attach_status):
				self.CreateHtmlTestRowQueue('N/A', 'OK', len(self.UEDevices), html_queue)
				result = re.search('T_stdout', str(self.Initialize_eNB_args))
				if result is not None:
					logging.debug('Waiting 5 seconds to fill up record file')
					time.sleep(5)
			else:
				self.CreateHtmlTestRowQueue('N/A', 'KO', len(self.UEDevices), html_queue)
				self.AutoTerminateUEandeNB()
				self.CreateHtmlTabFooter(False)
				sys.exit(1)

	def DetachUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell /data/local/tmp/off', '\$', 60)
			logging.debug('\u001B[1mUE (' + device_id + ') Detach Completed\u001B[0m')
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def DetachUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.AutoTerminateUEandeNB()
			self.CreateHtmlTabFooter(False)
			sys.exit(1)
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = self.DetachUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
		result = re.search('T_stdout', str(self.Initialize_eNB_args))
		if result is not None:
			logging.debug('Waiting 5 seconds to fill up record file')
			time.sleep(5)

	def RebootUE_common(self, device_id):
		try:
			self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
			previousmDataConnectionStates = []
			# Save mDataConnectionState
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
			result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
			if result is None:
				logging.debug('\u001B[1;37;41m mDataConnectionState Not Found! \u001B[0m')
				sys.exit(1)
			previousmDataConnectionStates.append(int(result.group('state')))
			# Reboot UE
			self.command('stdbuf -o0 adb -s ' + device_id + ' shell reboot', '\$', 10)
			time.sleep(60)
			previousmDataConnectionState = previousmDataConnectionStates.pop(0)
			count = 180
			while count > 0:
				count = count - 1
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell dumpsys telephony.registry | grep mDataConnectionState', '\$', 15)
				result = re.search('mDataConnectionState.*=(?P<state>[0-9\-]+)', str(self.ssh.before))
				if result is None:
					mDataConnectionState = None
				else:
					mDataConnectionState = int(result.group('state'))
					logging.debug('mDataConnectionState = ' + result.group('state'))
				if mDataConnectionState is None or (previousmDataConnectionState == 2 and mDataConnectionState != 2):
					logging.debug('\u001B[1mWait UE (' + device_id + ') a second until reboot completion (' + str(180-count) + ' times)\u001B[0m')
					time.sleep(1)
				else:
					logging.debug('\u001B[1mUE (' + device_id + ') Reboot Completed\u001B[0m')
					break
			if count == 0:
				logging.debug('\u001B[1;37;41m UE (' + device_id + ') Reboot Failed \u001B[0m')
				sys.exit(1)
			self.close()
		except:
			os.kill(os.getppid(),signal.SIGUSR1)

	def RebootUE(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		initialize_eNB_flag = False
		pStatus = self.CheckProcessExist(initialize_eNB_flag)
		if (pStatus < 0):
			self.CreateHtmlTestRow('N/A', 'KO', pStatus)
			self.CreateHtmlTabFooter(False)
			sys.exit(1)
		multi_jobs = []
		for device_id in self.UEDevices:
			p = Process(target = self.RebootUE_common, args = (device_id,))
			p.daemon = True
			p.start()
			multi_jobs.append(p)
		for job in multi_jobs:
			job.join()
		self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)

	def GetAllUEDevices(self, terminate_ue_flag):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('adb devices', '\$', 15)
		self.UEDevices = re.findall("\\\\r\\\\n([A-Za-z0-9]+)\\\\tdevice",str(self.ssh.before))
		if terminate_ue_flag == False:
			if len(self.UEDevices) == 0:
				logging.debug('\u001B[1;37;41m UE Not Found! \u001B[0m')
				sys.exit(1)
		self.close()

	def GetAllCatMDevices(self, terminate_ue_flag):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		self.command('lsusb | egrep "Future Technology Devices International, Ltd FT2232C" | sed -e "s#:.*##" -e "s# #_#g"', '\$', 15)
		self.CatMDevices = re.findall("\\\\r\\\\n([A-Za-z0-9_]+)",str(self.ssh.before))
		if terminate_ue_flag == False:
			if len(self.CatMDevices) == 0:
				logging.debug('\u001B[1;37;41m CAT-M UE Not Found! \u001B[0m')
				sys.exit(1)
		self.close()

	def GetAllUEIPAddresses(self):
		if self.ADBIPAddress == '' or self.ADBUserName == '' or self.ADBPassword == '':
			Usage()
			sys.exit('Insufficient Parameter')
		ue_ip_status = 0
		self.UEIPAddresses = []
		self.open(self.ADBIPAddress, self.ADBUserName, self.ADBPassword)
		for device_id in self.UEDevices:
			count = 0
			while count < 4:
				self.command('stdbuf -o0 adb -s ' + device_id + ' shell ip addr show | grep rmnet', '\$', 15)
				result = re.search('inet (?P<ueipaddress>[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\/[0-9]+[0-9a-zA-Z\.\s]+', str(self.ssh.before))
				if result is None:
					logging.debug('\u001B[1;37;41m UE IP Address Not Found! \u001B[0m')
					time.sleep(1)
					count += 1
				else:
					count = 10
			if count < 9: