Forked from
oai / openairinterface5G
26628 commits behind the upstream repository.
-
gauthier authoredgit-svn-id: http://svn.eurecom.fr/openair4G/trunk@6406 818b1a75-f10b-46b9-bf7c-635c3b92a50f
gauthier authoredgit-svn-id: http://svn.eurecom.fr/openair4G/trunk@6406 818b1a75-f10b-46b9-bf7c-635c3b92a50f
build_oai.bash 27.34 KiB
################################################################################
# OpenAirInterface
# Copyright(c) 1999 - 2014 Eurecom
#
# OpenAirInterface is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) anylater version.
#
#
# OpenAirInterface is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenAirInterface.The full GNU General Public License is
# included in this distribution in the file called "COPYING". If not,
# see <http://www.gnu.org/licenses/>.
#
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
################################################################################
# file build_oai.bash
# brief OAI automated build tool that can be used to install, compile, run OAI.
# author Navid Nikaein, Lionel GAUTHIER
# company Eurecom
# email: navid.nikaein@eurecom.fr, lionel.gauthier@eurecom.fr
#
#!/bin/bash
################################
# include helper functions
################################
THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
. $THIS_SCRIPT_PATH/build_helper.bash
check_for_root_rights
#######################################
# Default PARAMETERS
######################################
declare OAI_DB_ADMIN_USER_NAME="root"
declare OAI_DB_ADMIN_USER_PASSWORD="linux"
#only one could be set at the time
declare BUILD_LTE="" # ENB, EPC, HSS, NONE
declare HW="EXMIMO" # EXMIMO, USRP, ETHERNET, NONE
declare TARGET="ALL" # ALL, SOFTMODEM, OAISIM, UNISIM, NONE
declare ENB_S1=1
declare REL="REL8" # REL8, REL10
declare RT="NONE" # RTAI, RT_PREMPT or RT_DISABLED, NONE
declare DEBUG=0
declare CONFIG_FILE=" "
declare CONFIG_FILE_ACCESS_OK=0
declare EXE_ARGUMENTS=" "
declare RUN_GDB=0
declare RUN=0
declare DISABLE_CHECK_INSTALLED_SOFTWARE=0
declare OAI_CLEAN=0
declare CLEAN_IPTABLES=0
declare CLEAN_HSS=0
declare OAI_TEST=0
declare XFORMS=0
# script is not currently handling these params
declare EPC=0 # flag to build EPC
declare ITTI_ANALYZER=0
declare VCD_TIMING=0
declare WIRESHARK=0
declare TIME_MEAS=0
declare DOXYGEN=0
declare DEV=0
EMULATION_DEV_INTERFACE="eth0"
EMULATION_MULTICAST_GROUP=1
EMULATION_DEV_ADDRESS=`ifconfig $EMULATION_DEV_INTERFACE | grep 'inet addr:'| grep -v '127.0.0.1' | cut -d: -f2 | awk '{ print $1}'`
############## script params #####################
if [ -f ./.lock_oaibuild ]; then
OAI_CLEAN=0
else
OAI_CLEAN=1
fi
#for i in "$@"
#do
# echo "i is : $i"
# case $i in
until [ -z "$1" ]
do
case "$1" in
-a | --doxygen)
DOXYGEN=1
echo "setting doxygen flag to: $DOXYGEN"
shift;
;;
-b | --disable-s1)
ENB_S1=0
echo "disable eNB S1 flag"
shift;
;;
-c | --clean)
rm -rf ./.lock_oaibuild
OAI_CLEAN=1
CLEAN_HSS=1
echo "setting clean flag to: $OAI_CLEAN"
echo "may check package installation, and recompile OAI"
shift;
;;
--clean-iptables)
CLEAN_IPTABLES=1;
shift;
;;
-C | --config-file)
CONFIG_FILE=$2
# may be relative path
if [ -f $(dirname $(readlink -f $0))/$CONFIG_FILE ]; then
CONFIG_FILE=$(dirname $(readlink -f $0))/$CONFIG_FILE
echo "setting config file to: $CONFIG_FILE"
CONFIG_FILE_ACCESS_OK=1
else
# may be absolute path
if [ -f $CONFIG_FILE ]; then
echo "setting config file to: $CONFIG_FILE"
CONFIG_FILE_ACCESS_OK=1
else
echo "config file not found"
exit 1
fi
fi
EXE_ARGUMENTS="$EXE_ARGUMENTS -O $CONFIG_FILE"
shift 2;
;;
-d | --debug)
DEBUG=1
echo "setting debug flag to: $DEBUG"
shift;
;;
-D | --disable-check-installed-software)
DISABLE_CHECK_INSTALLED_SOFTWARE=1
echo "disable check installed software"
shift;
;;
-e | --realtime)
RT=$2
echo "setting realtime flag to: $RT"
shift 2 ;
;;
-g | --run-with-gdb)
DEBUG=1
RUN=1
RUN_GDB=1
echo "Running with gdb"
shift;
;;
-K | --itti-dump-file)
ITTI_ANALYZER=1
ITTI_DUMP_FILE=$2
echo "setting ITTI dump file to: $ITTI_DUMP_FILE"
EXE_ARGUMENTS="$EXE_ARGUMENTS -K $ITTI_DUMP_FILE"
shift 2;
;;
-l | --build-target)
BUILD_LTE=$2
echo "setting top-level build target to: $2"
shift 2;
;;
-h | --help)
print_help
exit -1
;;
-m | --build-from-makefile)
BUILD_FROM_MAKEFILE=1
set_build_from_makefile $BUILD_FROM_MAKEFILE
echo "setting a flag to build from makefile to: $BUILD_FROM_MAKEFILE"
shift;
;;
-r | --3gpp-release)
REL=$2
echo "setting release to: $REL"
shift 2 ;
;;
-R | --run)
RUN=1
echo "setting run to $RUN"
shift;
;;
-s | --check)
OAI_TEST=1
echo "setting sanity check to: $OAI_TEST"
shift;
;;
-t | --enb-build-target)
TARGET=$2
echo "setting enb build target to: $TARGET"
shift 2;
;;
-V | --vcd)
echo "setting gtk-wave output"
VCD_TIMING=1
EXE_ARGUMENTS="$EXE_ARGUMENTS -V"
shift ;
;;
-w | --hardware)
HW="$2" #"${i#*=}"
echo "setting hardware to: $HW"
shift 2 ;
;;
-x | --xforms)
XFORMS=1
EXE_ARGUMENTS="$EXE_ARGUMENTS -d"
echo "setting xforms to: $XFORMS"
shift;
;;
-z | --defaults)
echo "setting all parameters to: default"
rm -rf ./.lock_oaibuild
OAI_CLEAN=1
HW="EXMIMO"
TARGET="ALL"
ENB_S1=1
REL="REL8"
RT="NONE"
DEBUG=0
ENB_CONFIG_FILE=$OPENAIR_TARGETS/"PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.conf"
OAI_TEST=0
shift ;
;;
*)
echo "Unknown option $1"
break ;
# unknown option
;;
esac
done
#####################
# create a bin dir
#####################
echo_info "1. Creating the bin dir ..."
rm -rf bin
mkdir -m 777 -p bin
build_date=`date +%Y_%m_%d`
oai_build_date="oai_built_${build_date}"
touch bin/${oai_build_date}
chmod -f 777 bin/${oai_build_date}
touch bin/install_log.txt
chmod -f 777 bin/install_log.txt
################################
# cleanup first
################################
#echo_info "3. Cleaning ..."
#$SUDO kill -9 `ps -ef | grep oaisim | awk '{print $2}'` 2>&1
#$SUDO kill -9 `ps -ef | grep lte-softmodem | awk '{print $2}'` 2>&1
#$SUDO kill -9 `ps -ef | grep dlsim | awk '{print $2}'` 2>&1
#$SUDO kill -9 `ps -ef | grep ulsim | awk '{print $2}'` 2>&1
if [ $CLEAN_IPTABLES -eq 1 ]; then
echo_info "Flushing iptables..."
$SUDO modprobe ip_tables
$SUDO modprobe x_tables
$SUDO iptables -P INPUT ACCEPT
$SUDO iptables -F INPUT
$SUDO iptables -P OUTPUT ACCEPT
$SUDO iptables -F OUTPUT
$SUDO iptables -P FORWARD ACCEPT
$SUDO iptables -F FORWARD
$SUDO iptables -t nat -F
$SUDO iptables -t mangle -F
$SUDO iptables -t filter -F
$SUDO iptables -t raw -F
echo_info "Flushed iptables"
fi
############################################
# setting and printing OAI envs, we should check here
############################################
echo_info "2. Setting the OAI PATHS ..."
set_openair_env
cecho "OPENAIR_HOME = $OPENAIR_HOME" $green
cecho "OPENAIR1_DIR = $OPENAIR1_DIR" $green
cecho "OPENAIR2_DIR = $OPENAIR2_DIR" $green
cecho "OPENAIR3_DIR = $OPENAIR3_DIR" $green
cecho "OPENAIRCN_DIR = $OPENAIRCN_DIR" $green
cecho "OPENAIR_TARGETS = $OPENAIR_TARGETS" $green
echo "OPENAIR_HOME = $OPENAIR_HOME" >> bin/${oai_build_date}
echo "OPENAIR1_DIR = $OPENAIR1_DIR" >> bin/${oai_build_date}
echo "OPENAIR2_DIR = $OPENAIR2_DIR" >> bin/${oai_build_date}
echo "OPENAIR3_DIR = $OPENAIR3_DIR" >> bin/${oai_build_date}
echo "OPENAIRCN_DIR = $OPENAIRCN_DIR" >> bin/${oai_build_date}
echo "OPENAIR_TARGETS = $OPENAIR_TARGETS" >> bin/${oai_build_date}
build_enb(){
##########################################
# process parameters
#########################################
echo_info "4. Process the parameters"
echo_info "User-defined Parameters : HW=$HW, TARGET=$TARGET, ENB_S1=$ENB_S1, REL=$REL, RT=$RT, DEBUG=$DEBUG XFORMS=$XFORMS"
echo "User-defined Parameters : HW=$HW, TARGET=$TARGET, ENB_S1=$ENB_S1, REL=$REL, RT=$RT, DEBUG=$DEBUG XFORMS=$XFORMS" >> bin/${oai_build_date}
############################################
# compilation directives
############################################
echo_info "5. building the compilation directives ..."
SOFTMODEM_DIRECTIVES="DEBUG=$DEBUG XFORMS=$XFORMS "
OAISIM_DIRECTIVES="DEBUG=$DEBUG XFORMS=$XFORMS "
if [ $ENB_S1 -eq 1 ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES USE_MME=R10 ENABLE_ITTI=1 LINK_PDCP_TO_GTPV1U=1 SECU=1 "
OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES USE_MME=R10 ENABLE_ITTI=1 LINK_PDCP_TO_GTPV1U=1 SECU=1 "
fi
if [ $DEBUG -eq 0 ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES DISABLE_XER_PRINT=1 "
OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES DISABLE_XER_PRINT=1 "
fi
if [ $HW = "USRP" ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES USRP=1 "
fi
if [ $HW = "EXMIMO" ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES EXMIMO=1 "
fi
if [ $HW = "ETHERNET" ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES ETHERNET=1 "
fi
if [ $ENB_S1 -eq 0 ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES NAS=1 "
OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES NAS=1 "
fi
if [ $REL = "REL8" ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES Rel8=1 "
OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES Rel8=1 "
else
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES Rel10=1 "
OAISIM_DIRECTIVES="$OAISIM_DIRECTIVES Rel10=1 "
fi
if [ $RT = "RTAI" ]; then
if [ ! -f /usr/realtime/modules/rtai_hal.ko ]; then
echo_warning "RTAI doesn't seem to be installed"
RT="NONE"
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES RTAI=0 "
else
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES HARD_RT=1 "
fi
else
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES RTAI=0 "
RT="NONE"
fi
if [ $TARGET != "ALL" ]; then
if [ $TARGET != "SOFTMODEM" ]; then
HW="NONE"
fi
fi
if [ $UBUNTU_REL = "12.04" ]; then
output=$(check_for_machine_type 2>&1)
MACHINE_ARCH=$?
if [ $MACHINE_ARCH -eq 64 ]; then
SOFTMODEM_DIRECTIVES="$SOFTMODEM_DIRECTIVES LIBCONFIG_LONG=1 "
OAISIM_DIRECTIVES="$OASIM_DIRECTIVES LIBCONFIG_LONG=1 "
fi
fi
echo_success "SOFTMODEM Compilation directives: $SOFTMODEM_DIRECTIVES"
echo_success "OAISIM Compilation directives: $OAISIM_DIRECTIVES"
echo "SOFTMODEM Compilation directives: $SOFTMODEM_DIRECTIVES" >> bin/${oai_build_date}
echo "OAISIM Compilation directive: $OAISIM_DIRECTIVES" >> bin/${oai_build_date}
############################################
# check the installation
############################################
if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then
echo_info "6. Checking the the required softwares/packages ..."
check_install_oai_software
if [ $HW = "USRP" ]; then
check_install_usrp_uhd_driver
fi
check_install_asn1c
check_install_nettle
else
echo_info "6. Not checking the required softwares/packages ..."
touch ./.lock_oaibuild
fi
############################################
# compile
############################################
echo_info "7. compiling and installing the OAI binaries ..."
softmodem_compiled=1
oaisim_compiled=1
unisim_compiled=1
if [ $TARGET = "ALL" ]; then
echo "############# compile_ltesoftmodem #############" >> bin/install_log.txt
output=$(compile_ltesoftmodem >> bin/install_log.txt 2>&1 )
softmodem_compiled=$?
check_for_ltesoftmodem_executable
echo_info "7.1 finished ltesoftmodem target : check the installation log file bin/install_log.txt"
echo "################ compile_oaisim #################" >> bin/install_log.txt
output=$(compile_oaisim >> bin/install_log.txt 2>&1 )
oaisim_compiled=$?
check_for_oaisim_executable
echo_info "7.2 finished oaisim target : check the installation log file bin/install_log.txt"
echo "################## compile_unisim ##################" >> bin/install_log.txt
output=$(compile_unisim >> bin/install_log.txt 2>&1 )
unisim_compiled=$?
check_for_dlsim_executable
check_for_ulsim_executable
check_for_pucchsim_executable
check_for_prachsim_executable
check_for_pdcchsim_executable
check_for_pbchsim_executable
check_for_mbmssim_executable
echo_info "7.3 finished unisim target : check the installation log file bin/install_log.txt"
else
if [ $TARGET == "SOFTMODEM" ]; then
echo "############# compile_ltesoftmodem #############" >> bin/install_log.txt
output=$(compile_ltesoftmodem >> bin/install_log.txt 2>&1 )
softmodem_compiled=$?
check_for_ltesoftmodem_executable
echo_info "7.1 finished ltesoftmodem target: check the installation log file bin/install_log.txt"
if [ $HW == "EXMIMO" ]; then
output=$(compile_exmimo2_driver >> bin/install_log.txt 2>&1)
fi
fi
if [ $TARGET = "OAISIM" ]; then
echo "################ compile_oaisim #################" >> bin/install_log.txt
output=$(compile_oaisim >> bin/install_log.txt 2>&1 )
oaisim_compiled=$?
check_for_oaisim_executable
echo_info "7.2 finished oaisim target: check the installation log file bin/install_log.txt"
fi
if [ $TARGET = "UNISIM" ]; then
echo "################## compile_unisim ##################" >> bin/install_log.txt
output=$(compile_unisim >> bin/install_log.txt 2>&1 )
unisim_compiled=$?
check_for_dlsim_executable
check_for_ulsim_executable
check_for_pucchsim_executable
check_for_prachsim_executable
check_for_pdcchsim_executable
check_for_pbchsim_executable
check_for_mbmssim_executable
echo_info "7.3 finished unisim target: check the installation log file bin/install_log.txt"
fi
fi
############################################
# install
############################################
echo_info "8. Installing ..."
if [ $softmodem_compiled -eq 0 ]; then
echo_success "target lte-softmodem built and installed in the bin directory"
echo "target lte-softmodem built and installed in the bin directory" >> bin/${oai_build_date}
output=$(install_ltesoftmodem $RT $HW $ENB_S1 )
fi
if [ $oaisim_compiled -eq 0 ]; then
echo_success "target oaisim built and installed in the bin directory"
echo "target oaisim built and installed in the bin directory" >> bin/${oai_build_date}
output=$(install_oaisim $ENB_S1 )
fi
if [ $unisim_compiled -eq 0 ]; then
echo_success "target unisim built and installed in the bin directory"
echo "target unisim built and installed in the bin directory" >> bin/${oai_build_date}
fi
echo_info "build terminated, binaries are located in bin/"
echo_info "build terminated, logs are located in bin/${oai_build_date} and bin/install_log.txt"
}
build_epc(){
epc_compiled=1
echo_info "Note: this scripts tested only on Ubuntu 12.04 x64, 14.04 x64"
######################################
# CHECK MISC SOFTWARES AND LIBS #
######################################
if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then
echo_info "4. Checking the the required softwares/packages for EPC..."
check_install_epc_software
check_install_asn1c
if [ $OAI_CLEAN -eq 1 ]; then
check_install_freediamter
else
if [ ! -d /usr/local/etc/freeDiameter ]; then
check_install_freediamter
fi
fi
else
echo_info "4. Not checking the required softwares/packages for EPC"
fi
###########################################
# configure and compile
##########################################
echo_info "5. configure and compile epc"
output=$(compile_epc $OAI_CLEAN >> bin/install_log.txt 2>&1 )
epc_compiled=$?
if [ $epc_compiled -ne 0 ]; then
echo_error "EPC compilation failed : check the installation log file bin/install_log.txt"
exit 1
fi
check_for_epc_executable
echo_info "finished epc target: check the installation log file bin/install_log.txt"
if [ $CONFIG_FILE_ACCESS_OK -eq 0 ]; then
echo_error "You have to provide a EPC config file"
exit 1
fi
TEMP_FILE=`tempfile`
VARIABLES=" S6A_CONF\|\
HSS_HOSTNAME\|\
REALM"
VARIABLES=$(echo $VARIABLES | sed -e 's/\\r//g')
VARIABLES=$(echo $VARIABLES | tr -d ' ')
cat $CONFIG_FILE | grep -w "$VARIABLES"| tr -d " " | tr -d ";" > $TEMP_FILE
source $TEMP_FILE
rm -f $TEMP_FILE
if [ x"$REALM" == "x" ]; then
echo_error "Your config file do not contain a REALM for S6A configuration"
exit 1
fi
if [ x"$S6A_CONF" != "x./epc_s6a.conf" ]; then
echo_error "Your config file do not contain the good path for the S6A config file,"
echo_error "accordingly to what is done in this script, it should be set to epc_s6a.conf"
exit 1
fi
check_epc_s6a_certificate $REALM
###########################################
# install the binary in bin
##########################################
echo_info "6. install the binary file"
if [ $epc_compiled -eq 0 ]; then
echo_success "target epc built and installed in the bin directory"
echo "target epc built and installed in the bin directory" >> bin/${oai_build_date}
cp -f $CONFIG_FILE $OPENAIR_TARGETS/bin
cp -f $OPENAIRCN_DIR/objs/UTILS/CONF/s6a.conf $OPENAIR_TARGETS/bin/epc_s6a.conf
fi
}
build_hss(){
echo_info "Note: this script tested only for Ubuntu 12.04 x64 -> 14.04 x64"
######################################
# CHECK MISC SOFTWARES AND LIBS #
######################################
if [ $DISABLE_CHECK_INSTALLED_SOFTWARE -eq 0 ]; then
echo_info "4. check the required packages for HSS"
check_install_hss_software
if [ $OAI_CLEAN -eq 1 ]; then
check_install_freediamter
else
if [ ! -d /usr/local/etc/freeDiameter ]; then
check_install_freediamter
fi
fi
else
echo_info "4. Not checking the required packages for HSS"
fi
######################################
# compile HSS #
######################################
echo_info "5. compile HSS"
# Bad behaviour of $OAI_CLEAN with ./.lock_oaibuild ...
compile_hss $CLEAN_HSS
hss_compiled=$?
check_for_hss_executable
echo_info "finished hss target"
######################################
# Check certificates #
######################################
TEMP_FILE=`tempfile`
cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf | grep -w "Identity" | tr -d " " | tr -d ";" > $TEMP_FILE
cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_user" | tr -d " " | tr -d ";" >> $TEMP_FILE
cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_pass" | tr -d " " | tr -d ";" >> $TEMP_FILE
cat $OPENAIRCN_DIR/OPENAIRHSS/conf/hss.conf | grep -w "MYSQL_db" | tr -d " " | tr -d ";" >> $TEMP_FILE
source $TEMP_FILE
rm -f $TEMP_FILE
if [ x"$Identity" == "x" ]; then
echo_error "Your config file do not contain a host identity for S6A configuration"
exit 1
fi
HSS_REALM=$(echo $Identity | sed 's/.*\.//')
HSS_HOSTNAME=${Identity%.$HSS_REALM}
NEW_HOSTNAME=`hostname -s`
if [ "x$HSS_HOSTNAME" != "x$NEW_HOSTNAME" ]; then
echo_warning "Changing identity of HSS from <$HSS_HOSTNAME.$HSS_REALM> to <$NEW_HOSTNAME.$HSS_REALM>"
sed -ibak "s/$HSS_HOSTNAME/$NEW_HOSTNAME/" $OPENAIRCN_DIR/OPENAIRHSS/conf/hss_fd.conf
fi
check_hss_s6a_certificate $HSS_REALM
######################################
# fill the HSS DB
######################################
echo_info "6. create HSS database (for EURECOM SIM CARDS)"
hss_db_created=1
create_hss_database $OAI_DB_ADMIN_USER_NAME $OAI_DB_ADMIN_USER_PASSWORD $MYSQL_user $MYSQL_pass $MYSQL_db
if [ $? -eq 1 ]; then
echo_fatal "hss DB not created"
fi
}
############################################
# set the build
############################################
if [ x$BUILD_LTE == x ]; then
: ${DIALOG_OK=0}
: ${DIALOG_CANCEL=1}
: ${DIALOG_HELP=2}
: ${DIALOG_EXTRA=3}
: ${DIALOG_ITEM_HELP=4}
: ${DIALOG_ESC=255}
: ${SIG_NONE=0}
: ${SIG_HUP=1}
: ${SIG_INT=2}
: ${SIG_QUIT=3}
: ${SIG_KILL=9}
: ${SIG_TERM=15}
input=`tempfile 2>/dev/null` || input=/tmp/input$$
output=`tempfile 2>/dev/null` || output=/tmp/test$$
trap "rm -f $input $output" $SIG_NONE $SIG_HUP $SIG_INT $SIG_TRAP $SIG_TERM
cat >$input <<-EOF
ENB: evolved Node B target
EPC: Experimental Evolved Packet Core target
HSS: Experimental Home Subscriber Server target
NONE: Do not build/run anything
EOF
cat $input | sed -e 's/^/"/' -e 's/:/" "/g' -e 's/$/"/' >$output
cat $output >$input
BUILD_LTE="NONE"
dialog --clear --title "BUILD TARGET SELECTION" \
--menu "You did not choose a target \n\
to build (optionaly to run) \n\
You can use the UP/DOWN arrow keys, \n\
the first letter of the choice as a hot key,\n\
or the number keys 1-4 to choose an option.\n\
\n\n\
Choose the target:" 20 69 4 \
--file $input 2> $output
retval=$?
tempfile=$output
case $retval in
$DIALOG_OK)
BUILD_LTE=`cat $tempfile`
;;
$DIALOG_CANCEL)
;;
$DIALOG_HELP)
;;
$DIALOG_EXTRA)
;;
$DIALOG_ITEM_HELP)
;;
$DIALOG_ESC)
;;
*)
;;
esac
fi
echo_info "3. set the top-level build target"
case "$BUILD_LTE" in
'ENB')
echo_success "build LTE eNB"
build_enb
;;
'EPC')
echo_warning "build EPC(MME and xGW): Experimental"
build_epc
;;
'HSS')
echo_warning "BUILD_LTE: $BUILD_LTE"
echo_warning "build HSS: Experimental"
build_hss
;;
'NONE')
;;
*)
;;
esac
# Additional operation
############################################
# Generate doxygen documentation
############################################
if [ $DOXYGEN = 1 ]; then
echo_info "9. Generate doxygen documentation ..."
doxygen $OPENAIR_TARGETS/DOCS/Doxyfile
echo_info "9.1 use your navigator to open $OPENAIR_TARGETS/DOCS/html/index.html "
else
echo_info "9. Bypassing doxygen documentation ..."
fi
############################################
# testing
############################################
if [ $OAI_TEST -eq 1 ]; then
echo_info "10. Testing ..."
python $OPENAIR_TARGETS/TEST/OAI/test01.py
else
echo_info "10. Bypassing the Tests ..."
fi
############################################
# run
############################################
if [ $RUN -ne 0 ]; then
echo_info "11. Running ..."
cd $OPENAIR_TARGETS/bin
case "$BUILD_LTE" in
'ENB')
if [ $TARGET == "SOFTMODEM" ]; then
if [ $HW == "EXMIMO" ]; then
$SUDO chmod 777 $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
$SUDO $OPENAIR_TARGETS/RT/USER/init_exmimo2.sh
fi
echo "############# running ltesoftmodem #############"
if [ $RUN_GDB -eq 0 ]; then
$SUDO exec $OPENAIR_TARGETS/bin/lte-softmodem `echo $EXE_ARGUMENTS`
else
$SUDO setenv MALLOC_CHECK_ 2
$SUDO touch ~/.gdb_lte_softmodem
$SUDO echo "file $OPENAIR_TARGETS/bin/lte-softmodem" > ~/.gdb_lte_softmodem
$SUDO echo "set args $EXE_ARGUMENTS" >> ~/.gdb_lte_softmodem
$SUDO echo "run" >> ~/.gdb_lte_softmodem
$SUDO gdb -nh -x ~/.gdb_lte_softmodem 2>&1
fi
fi
;;
'EPC')
echo "############# running EPC #############"
test_is_host_reachable $HSS_HOSTNAME.$REALM HSS
if [ $RUN_GDB -eq 0 ]; then
$SUDO $OPENAIR_TARGETS/bin/oai_epc `echo $EXE_ARGUMENTS`
else
touch ~/.gdb_epc
chmod 777 ~/.gdb_epc
echo "file $OPENAIR_TARGETS/bin/oai_epc" > ~/.gdb_epc
echo "set args $EXE_ARGUMENTS" >> ~/.gdb_epc
echo "run" >> ~/.gdb_epc
$SUDO gdb -nh -x ~/.gdb_epc 2>&1
fi
;;
'HSS')
echo "############# running HSS #############"
cd $OPENAIRCN_DIR/OPENAIRHSS/objs
if [ $RUN_GDB -eq 0 ]; then
$SUDO exec ./openair-hss -c ./conf/hss.conf
else
touch ~/.gdb_hss
chmod 777 ~/.gdb_hss
echo "file ./openair-hss" > ~/.gdb_hss
echo "set args -c ./conf/hss.conf" >> ~/.gdb_hss
echo "run" >> ~/.gdb_hss
$SUDO gdb -nh -x ~/.gdb_hss 2>&1
fi
;;
'NONE')
;;
*)
echo_error "Unknown option $BUILD_LTE: do not execute"
;;
esac
else
echo_info "11. No run requested, end of script"
exit 0
fi